I am making a report off of a query. The report is returning values from a Option Group. 1=Yes, 2=No and 3=N/A. The report returns the numeric values and I want the value labels instead. So, I created a column in the query for exp1 which looks like the following:
=IIF([VSArrive]=1,"Yes",IIF([VSArrive]=2,"No","N/A"))
What the report returns is #Error.
My problems is that when I use below setup without the "Notes" tabel, they query works fine, and returns the amount of spares and time used by a single WBS ID. (Customer). But when I add another tabel and link it together. Its returns load of lines with the same data - it looks like its copying its self, over and over again.
View 4 Replies View RelatedI have a form with a textbox, where one inputs a number and then I run a query with the form criteria. The query is
Code:
Select Blah blah from dbo_temp where A>textbox value OR B>textbox value OR C>textbox value OR D>textbox value
The columns which are linked to the textbox some times contain null values. So, A, B, C, D columns do contain null values.
The expression in the "Criteria" column of Columns A, B, C, D (all on different lines - to make sure OR criteria is fullfilled) is as follows
Code:
>IIf(IsNull([Forms]![MainForm]![Criteria]),-100,[Forms]![MainForm]![Criteria])
I've put in -100 as an arbitrary never possible number. Obviously, this does not return Null values.
Question: How can I return both Null & Numbers when the Textbox in the form is left blank? in all the columns. Currently, I am not getting Null values
Code:
>IIf(IsNull([Forms]![MainForm]![Criteria]),SHOW ME EVERYTHING INCLUDING NULL VALUES & NON-NULL NUMBERS,[Forms]![Material Finder]![txtPS])
or in other words
If the textbox is blank, show me all the data available, else if it is not blank then show me only the values that are greater than the number entered in the textbox from within column A, B, C, D ....
How do you search for any number of numeric characters using wildcards? The # symbol only searches for 1, and * obviously includes letters.
Example:
I have:
D1234
D3
D5336767
D123F
My search should only retrieve the first 3 values.
WHERE FieldName LIKE 'D[0-99999999]' does not seem to work.
A have a report that is based on a query that works fine when the query returns records.
However if the query (legitimately) returns no records then the report fields (numeric) are blank.
How can i get the query or report to show either "0" or "no data" when no records are returned? I have tried the NZ function but that didn't work so i don't think that is the right approach here?
I have a travel time database that should tally the number of minutes traveled and convert them into a time (hours and minutes). I, however, am having difficulty converting the numeric values cleanly. Is there anyway to convert 102 minutes + 100 minutes + 110 minutes = 312 minutes to 5 hours and 12 minutes cleanly? I need to take averages of time traveled and hours worked but cannot do this correctly. Thank you for any help in advance.:eek:
View 2 Replies View RelatedI'm trying to execute a query which is looking at data from 2 different tables and most of the data fields in the tables are the same. For instance table 1 has Dept, Res, Period_date, & Available Hrs and table 2 has Dept, Res, Period_date, Project & Forecast Hrs. The results I'm looking for are as follows:
Dept Res Period_date Project Forecast Hrs Available Hrs
11 A 11-02-07 123 XXXXX
11 A 11-02-07 456 XXXXX
11 A 11-02-07 789 XXXXX
11 A 11-02-07 012 XXXXX
11 A 11-02-07 XXXXX
But the "Available Hours" are duplicated in the preceeding 4 rows.
Thanks for any advice on this.
I have a query which returns values from a table, as follows:
Service_Date
Supervisor
EExpect
EAchieve
OExpect
OAchieve
IntLossOP
IntLossEN
This is used for a report for a 28-day period (the query selecting the Start Date and the End Date), and the intention is to show the information grouped by Supervisor, showing the information for as many days as they worked.However, I would like to have the overall 28-day averages of the six fields EExpect thru to IntLossEN shown underneath the detail for each individual. I know I could do this in Access Totals in the page footer if the report was confined to one supervisor, but with up to 20 supervisors I am unsure how to get these totals after the detail for each?
I would also like to have this summary information for each individual presented on a separate page at the end of the report (almost like a league table, if you like), so there is a single page that shows the data for each supervisor in comparison to all their colleagues.
Hi
Can anyone suggest a method for doing what the title asks. I basically have a single table with several fields. One of the fields is the length of music tracks in seconds. What i want to do is to set criteria so that when a query is run the records to not add up to more than 900 seconds.
1stly) Is this "do-able" using queries or do i need to start implementing sql statements which i have limited experience of?
2ndly) Can anyone recommend a suitable method to do so provided it isn't very complex.
My knowledge of Access is Intermediate.
Kind regards
How can I check if the user is entering numeric values?
I can do it in the code, i.e. the lost focus event to the text box but I want to make a check in the "validation rule property" of the text box...!! How is it possible??
Thanks
On a form I have the following field:
Name: PaymentsMade
Control Source: =DLookUp("SumOfPrePaymentValue","qryInvoicePrepaym entSum","InvoiceId = " & [InvoiceId])
In the form's footer I have the unbound text control:
Name: SumOfPaymentsMade
Control Source: =Sum([PaymentsMade])
SumOfPaymentsMade returns #Error
How do I get it to return the sum of PaymentsMade?
Hello,
I am not sure what cateogory to choose for this question but I would greatly appreciate your help.
I have 5 buttons in my option group:
1. very often
2. often
3. occasionally
4. rarely
5. never
I have to produce a report using description of each button in my report, not numeric value. I heard something about global variable but I am not sure how to do it.
Many thanks,
Debbie
Hi,
I am trying to create a query that will return the max value of small groups of alpha numeric fields. The numeric portion is the same for a series/group of items, but the alpha increments. Example: (I color coded the numeric groups for ease of reading)
The following:
...
0001210-0015A
0001210-0015B
0001210-0015C
0001211-0001A
0001211-0001B
0001211-0001C
0001211-0001D
0001211-0002A
0001211-0002B
0001211-0003A
0001211-0003B
0001211-0003C
0001212-0001A
...
would have a query result like this:
...
0001210-0015C
0001211-0001D
0001211-0002B
0001211-0003C
0001212-0001A
...
Unfortunately, I do not have any other fields that I could use to help. I was able to create two calculated fields one with the numeric portion and one with the alpha portion, but then didn't know how to remove the unwanted ones. Also, every value is the same size, 7 numbers, one dash, four numbers, and one letter. My table has around four thousand records or so.
I thought of writting a VB app to single step and compare, but I am hoping there is a better method.
I have been pouring over this site and trying all kinds of things that end up failing. I am not a novice, but obviously not an expert.
Any help would be greatly appreciated.
Thanks in advance.
Hi
I am trying to replace the numeric values of a field with a text in querry using Choose function, something like this aa5:
Choose([a5]-1="one";[a5]-2="two";[a5]-3="three";[a5]-4="four")
But it is not giving me no results :(( I am missing something but I do not what. Maybe I should use some other function?
I hope someone will help me!
Is there a way to write different numerical values in single cell of table via form.
View 2 Replies View RelatedI've created a macro to use an unbound textbox to filter a form. In a query, I combined 3 fields to enable an easy search over. Sadly, only text characters work for the search, so whenever I search for numeric values, it returns null. This doesn't happen if I utilise the filter over just a numeric field - only when the search field combined multiple fields.
Is there a simple solution? My marco filter is
Code:
[Forms]![STAFF SEARCH FORM]![SEARCHDATA] Like "*" & "[SEARCHFIELD]" & "*"
I am adding fields with numeric values in design view of my query. The only issue I am having is that the query is not showing totals when one of the fields does not have a numeric value in it. How can I show the total numeric value regardless of the null value? Thank you:cool:
View 1 Replies View RelatedI am writing a sports database and have a query that displays a seasons fixture list in a form. One of the fields shows the points from each game played. (either 3 for a win, 1 for a draw etc). I can not get these points to be added up and displayed in a form along side the fixture list.
View 9 Replies View RelatedI currently have records that end with a letter and 2 numbers. For example, A1, A2, ... , A10, A11. When I try to sort my table/query by these values, A10 & A11 come before A2. It seems that it is sorting by the first digit shown. Is there any way to fix this quickly within table/query properties so that this can be displayed in proper numeric order?
View 7 Replies View RelatedDear All:
I have created a form with students information, name, address, ID number, etc.
Is there a way to place a checkbox on this form that when it is checked, it displays text on a SPECIFIC AREA ON A REPORT?
I wish it to return this text on a report: "HONORS COLLEGE"
Many thanks in advance,
Dion
The following code is in a text box on a report in a database that creates work contracts. The IIF statements and Dlookups pull the parts of the text together perfectly, but why the new line and carriage returns are completely ignored in the last section? Been working on this all day and we can't find a way of inserting 2 new lines!
Code:
=DLookUp("Description","QFRCL07") & (IIf(DLookUp("Description2","QFRCL07") Is Not Null,DLookUp("BasicSalary","Tmain","ContractID=ContractID") & " " & DLookUp("Description2","QFRCL07"),"")) & (IIf(DLookUp("Description3","QFRCL07") Is Not Null,DLookUp("Job","Tmain","ContractID=ContractID") & " " & DLookUp("Description3","QFRCL07"),"")) & (IIf([Forms]![FFRRCheck]![Text305] Is Not Null,(Chr(13) & Chr(10) & Chr(13) & Chr(10) & [Forms]![FFRRCheck]![Text305]),""))
If one of the fields are 0 then it returns this error on my Reports in the Field and/or in the Sum of these. I read somwhere to create a tblDivByZero table but since I'm a novice I still can't make this work.
How to Elimate #Div/0! Errors in MS Access Reports
I have a table with application records. One of the fields captures schools the applicant will work at. This field stores data in comma delimited format. There could be 1 school name; there could be 5 school names.
My ultimate goal is to build a report which shows me records of all applications, grouped by school choice. I want to see: School A was selected by 5 people, School B was selected by 7, etc.
Is it possible to write a query from this table that will enable this?
I have developed a database but have had difficulty with sorting data within subform of a main form. The subform displays the related tasks that correspond with main form that has been selected. Within the main form I have also created a text field that defines a particular sorting sequence of the tasks found within the subform which is titled Task Sequence. What I would like to do, is use the Task Sequence field to sort the order of tasks within subform. I have tried: IIf([ID] Is Null, 0, Val([Task Sequence])) within the Advanced filter/sort but either it shows only the first task defined in the Task Sequence or it wants to filter the main form and not the subform.
View 14 Replies View RelatedI have a front end that is connected to three back end files. The front end is on my local computer while the back end files are on a network drive.
There are a lot of calculations that go into the queries and intermediate queries. For a report, I have based it on a UNION query.
But when trying to design the report it takes about 45 seconds just to do any one thing, e.g.;
- Add Groupings
- Add Grouping Headers//Footer, sorting option
- Add bound textbox
:eek:
Needless to say this is very annoying.
:mad:
The union query itself runs fine (takes about 15 seconds to run) and returns about 12,000 Rows. The union query looks like this (I changed the field names to make it read easier, hopefully);
SELECT a1, a2, a3, a4, a5
FROM qry_A;
UNION SELECT ALL a1, b2 AS a2, b3 AS a3, a4, a5
FROM qry_B;
UNION SELECT ALL a1, c2 AS a2, c3 AS a3, a4, a5
FROM qry_C;
UNION SELECT ALL a1, d2 AS a2, a3, a4, a5
FROM qry_D;
UNION SELECT ALL a1, e2 AS a2, a3, a4, a5
FROM qry_E;
UNION SELECT ALL a1, f2AS a2, tblG.f3 AS a3, tblG.f4 AS a4, a5
FROM qry_F;
One solution I came across when searching the forums was to use an Append Query to append the query results to a table and base my report on that. This does indeed fix the problem.
But what I was wondering if it was is my query design that is causing it to be slow or is it just the fact that I am returning 12,000 rows?
:confused:
In case it matters, I wanted to mention that I can’t use the report wizard to create the report. When I select the union query, the fields will be showed for awhile then they just disappear. That in and of itself doesn’t cause any trouble since I am creating the report using the design view and not the wizard.
Hello,
I am not sure what cateogory to choose for this question but I would greatly appreciate your help.
I have 5 buttons in my option group:
1. very often
2. often
3. occasionally
4. rarely
5. never
I have to produce a report using description of each button in my report, not numeric value. I heard something about global variable but I am not sure how to do it.
Many thanks,
Debbie