Queries :: Take A Date From Textbox On A Form Into Append Query
Nov 26, 2013
how do you take a date from a textbox on a form into an Append query and increase the date entered into the textbox by 1 day.This is what I have so far but not working??
MealDate: [Forms]![FrmSwitchBoard]![txtweekend]=DateAdd("d",1,Date())
View Replies
ADVERTISEMENT
May 1, 2013
I have an database that uses a couple of different date ranges, so I created a table that shows the different date ranges that may be required (xReport Dates) so I didn't have to keep manually editing queries or entering dates every time.
I have one query that appends data from one table into another based on a date range that you need to manually enter when prompted; I can't seem to get it to refer to my xReport Dates table for the range.
Its currently set up as below:
INSERT INTO 001_M_Gross_Telesales ( UpdateDate, OMSNumber, MediaRoute, ExecName, SaleType, Name,
[Reporting Campaign], [Reporting Team], [Sales Leader], [Reprting Name], [Media Route2] )
SELECT Max(L_ExecTracker.UpdateDate) AS MaxOfUpdateDate, L_ExecTracker.OMSNumber,
L_ExecTracker.Campaign, L_ExecTracker.ExecName, L_ExecTracker.SaleType, Z_Ref_Agent_Table1.Field23,
[Code] .....
View 1 Replies
View Related
Jul 19, 2013
I am creating a database for users that no nothing about access nor do they want to learn. So the database needs to be as simple as possible.
This being the case I would like to avoid users from creating/editing querys.
I would like to have a form that would run the append query. The query would have a date column and a status column that the query would filter.
The query would have a criteria for status that would equal to "BACKED OUT" and the date would need to link to the two text fields on the form. My problem is writing the VBA code to make the query append in the background.
For sake of argument:
Query = qryappend
Form = frmappend
Table = tblappend
View 6 Replies
View Related
Jan 24, 2015
I have a database for billing. In my database, I have a form that consists of a main form "Order" and 2 subforms "OrderDetails" and "Customer" OrderDetails are to enter the products to be connected to the Order. All function super, but I want to have some information from one of the forms "copied" over to on of the others.
Here is what I would like
In the subform "OrderDetails" I have made a textbox that summarize all prices to a total, his tekstbox i called "Tekst31". I would like the amount in this textbox to appear in a field "Bel�b" in the main form "Order".
I have tried some different commands, but nothing has worked, also I have made a query which dose the same ting as the tekstboks, as the information in that tekstbox it not stored anywhere.
View 2 Replies
View Related
May 19, 2013
Have a query which looks up an address using the text input into a textbox by the user.
What I'm now struggling with is getting the query result into the textbox.
Am still new to access and am hoping this is something fairly simple.
View 2 Replies
View Related
Dec 8, 2014
I'm receiving an error indicating there is a data type mismatch when running a query named qappInventoryTakeOn.
Data is entered into the Inventory Transaction Form. If the transaction type is "Take On", when the update button is clicked the record will be saved to tblInventoryMovements and then qappInventoryTakeOn should run to update tblInventory, but I keep running into the aforementioned error.
View 2 Replies
View Related
May 14, 2013
I have a totals query that displays the sum of what products we ship each day. A process in the system automatically assigns the date/time to a ShippingDate field when an item is marked as despatched.
The totals query allows users to view what products are shipped between a period specified by the user.
The problem I am getting is that when the user inputs dates into fields [txtStart] and [txtEnd], the query fires up but will not display any records as a start time 00:00:00 and end time 23:59:59 was not input.
I don't want users to have to do this but cannot think of a way around it. My criteria code in the query for the shipping dates is
Code:
Between [Forms]![Switchboard]![txtStart] And [Forms]![Switchboard]![txtEnd]
Can I append the start / end time onto the code above somehow or is there another method I can utilise that is probably so glaringly obvious I have missed.
Usually a query allows me manipulate a field property sheet but in this case there is nothing obvious to select like format.
View 2 Replies
View Related
Sep 25, 2015
I have a text box named "scheduled_start" on my "JobsF" form.
Now what I'm trying to do is use two append query's to move the start date contained within the text box.
*The first append query will be on the before update and put this date in the "notesT" in the "old_date" field.
*The second append query will be on the After update and put this date in the "notesT" in the "New_date" field.
I'm trying to track date changes and this part of the process isn't working. For a start I don't know how to run the query on an event. I can open the query using 'openquery' but I don't wish to open it. Re query is also an option but the query I made isn't listed when that's selected.
View 13 Replies
View Related
Jul 20, 2005
I want a query that will append a date from one table to another, however I want it to incriment by one day. Is this possible? For example:
tblTable1
07/20/2005
07/25/2005
07/28/2005
ActionQuery - tblTable1 appends to tblTable2 and incriments one day:
tblTable2
07/21/2005
07/26/2005
07/29/2005
Is there a way?
View 2 Replies
View Related
Aug 30, 2007
Hi,
Here's my problem. I have a table that is for maintenance jobs that recur on a fixed schedule, i.e. cleaning gutters yearly. I need to run an append query that will take all the information and cause it to recur a given number of times. I've gotten that to work with just a standard append query pulling data from a form.
The part I'm having trouble with is this. I need to get that append query to take the start date for the job and increment it properly based on my selection of daily/monthly/yearly recurrence for each individual occurance of the job.
Hope someone can help,
Thanks,
Brian
View 6 Replies
View Related
Dec 5, 2014
I also have a query that displays a date, I would like this date to be displayed within the textbox, not sure how to do this?
View 4 Replies
View Related
Oct 12, 2014
I have a date textbox (Week_Ending) and number textbox (Staff_ID) in a form (frmHourEnter), when both have values I open another form (frmStaffReport) with textboxes (txtDateStart and cmbStaff).
How do I open the second form with the values of the first form pre-entered?
View 12 Replies
View Related
Jun 23, 2015
I have a form with a text box where the user enters a date and then clicks a button titled "Add." I've added an on-click event to the Add button that runs an append query that adds several records to a table [tblTracking]. I have a field in tblTracking called EndDate. I want the date that's entered into the text box by the user to be populated into all the new records added to the tblTracking when the append query is run. Currently, all fields in tblTracking are populated when the append query is run, except the EndDate field.
Is this possible? If so, how?
I've experimented with adding a separate on-click event that adds a record to a separate table containing only the date entered in the textbox and an auto-populated ID field. I thought there might be a way to utilize the ID field to pull the associated EndDate into the Tracking table, but I can't figure that out, either, since I don't know how to tell it to look at the date field in the last record of the table. That sounds unsafe anyway.
View 3 Replies
View Related
Mar 4, 2015
In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
View 1 Replies
View Related
Apr 19, 2013
I have a form(frmNewTest) that generates a fitness test id when you enter the month and year (you do not need to enter anything in the Fitness test id field which is greyed out).
This data on the form should then append to the tblFitnessTest. However, when I select the button to add test it returns a message 0 rows to append.I have attached the database and the form in question (frmNewTest). There are two append queries attached to the button on the form and neither work correctly. I have tried almost everything but can't get it to work.
View 4 Replies
View Related
Apr 3, 2013
My question is that I wish to have a query that looks up on a name in a form (No problem got this bit) and also the Date field from the same form so that from the date :-
example 24/03/2013 only cares about the Month and Year so would look up only March in 2013
The end result would be to supply me with a number (using count) of how many times this persons name has occurred within the calendar month and year of the date supplied in the form
View 1 Replies
View Related
Feb 14, 2014
I am having fun with key violations and cant seem to find out why?
I basically am deleting a Job but when i delete it i want to archive it hence the 'Archive' query and the History Tables.
It seems to be pasting everything in fine apart from the 'EmpJobHistory' Table?
I am getting the usual message "Key violations"?
I think i need the intermediate 'EmpJobHistory' Table because there will be Employees that are related to many Jobs and vice versa.
View 9 Replies
View Related
Feb 26, 2014
I am trying to copy notes from one table to another table where a condition has to be met and I can't figure out how to do that in an APPEND query.
Each record has a unique number that comes into my Initial Table in my Access database from a construction program I download. In this particular table both the [DNJTNo] and [DNVersionNmbr] fields can have duplicate numbers. However, when I run the query I want it to add a record to the second table only after the query checks that the [DNJTNo] in combination with the [DNVersionNmbr], is not already in the table. If it is, I do NOT want it appended to the second table. (I have attached a picture of the query in APPEND design stage).
View 2 Replies
View Related
Aug 15, 2013
How can I modify the below code so that it only adds new records to AttributesTBL from ProductInformation-Consumer?
INSERT INTO AttributesTBL ( Material )
SELECT [ProductInformation-Consumer].Material
FROM AttributesTBL INNER JOIN [ProductInformation-Consumer] ON AttributesTBL.Material = [ProductInformation-Consumer].Material;
View 2 Replies
View Related
Jun 10, 2014
I have a table with 3 fields:
numberFROM, numberTO, Quantity
e.g.:
10, 15, 6
I would execute an append query that will store in another table:
10
11
12
13
14
15
How could I mange it?
View 14 Replies
View Related
Apr 27, 2014
I am having problems adding details from StudentForm to student table. When I click on the add student button it throws back an error Microsoft Access cant append all the records in the append query.I have attached the error as a pdf and the database for info.
View 2 Replies
View Related
Apr 10, 2013
I am trying to use a textbox value as a query criteria using the code [Forms]![Home]![mtdDateBox], following the standard structure of referencing a form item. However, I am not returning any records, when it should be giving some. The data in the textbox follows the date format "DD.MM.YYYY" but is used as a string.
Is there something I am missing out? I am using MS Access 2010
View 1 Replies
View Related
Jul 2, 2015
I have a list of dates in my Form1.
When I click on a date it opens Form2 to show that dates specific details.
I would like a macro on Form2 that appends the filtered results to another table.
I think I am just struggling with the references to Form2 in the append query criteria.
View 1 Replies
View Related
Apr 23, 2013
I have two append queries that I use to archive certain data from two different tables to one archive table. The queries are run from the corresponding forms of the two tables. I would like to be able to add the form name to the append query.
That is, if the old data is coming from FrmA, then the Archive table would show that the old data came from FrmA or TblA, etc. I added a field in the Archive table [FormName]. I know you can call the name of the form by =frm.name, but how do I append this to the Archive table without having to have the Archive form open?
View 2 Replies
View Related
Nov 13, 2013
I'm having trouble with a Form and getting a text box entry box (Date entry) default to the date entered on the last record, which is linked to a table.
The only way I can get it to work is to type the date into the Text Box's Default property, for example, #11/13/13".
How to get the correct syntax or code into the Default property of the Text Box to make this work? I only want the entry to change versus the previous record/entry if the User changes / enters a new date.
View 9 Replies
View Related
Jul 30, 2013
I would like to use an append query that appends data from a union query into a table, but doesn't add duplicates based on a certain field.
I have been trying to use this code, but it doesnt seem to work.
INSERT INTO [Cotton13/14]
SELECT DISTINCT [Contracted Farmers].*
FROM [Contracted Farmers]
WHERE NOT (SELECT * FROM [Cotton13/14] FROM [Cotton13/14] AS [Cotton13/14] WHERE [Cotton13/14].[OF Codec] = [Contracted Farmers].[OF Codec])
Cotton13/14 is the table I want to append to and Contracted Farmers is the union query. However the code is giving me an error.
View 7 Replies
View Related