Queries :: Use A Query To Select Specific Records From Table
Dec 14, 2013
While I am not new to Access, I am not well versed in its abilities as far as combo boxes go. What I have is a Form where a combo box allows you to pick from a table records 'record ID #' in order to fill in the data of that record to the rest of the form.What I want to do is use a query to select specific records from this table and allow the combo box to show only these 'selected Record IDs' for user selection.
View Replies
ADVERTISEMENT
Jun 16, 2014
How can I get a Query Criteria To Select All Records or specific records in query design section.
I have a table that shows many departments with credit card transactions. I like to run a query to see specific department, or have an option to see all the departments when the query is run.
View 2 Replies
View Related
Jul 31, 2007
This is killing me,
I have a form with a unique ID, I have a query that pulls all data regardless of the ID on the form.
How can I get the Query to pull only the data for the ID that is currently in view on the form?
Please help..
Thanks,
Fen How
View 2 Replies
View Related
Jun 15, 2013
In an Access 2010 form is it possible to export select records and fields in those records to a specific location?
Code:
Set objDialog = Application.FileDialog(4)
With objDialog
.AllowMultiSelect = False
.Title = "Please select a File"
.InitialFilename = "C:"
.Show
If .SelectedItems.Count = 0 Then
MsgBox ("Action Cancelled")
Else
[code]....
The user can select the directory using the code above, but can specific fields in records be exported to a excel workbook in that selected directory?For example, if the are 5 records in the database can the fields LastName,FirstName,BirthDate in records 1,2,3 be exported to Setup.xlsx in that selected directory?
View 1 Replies
View Related
Nov 3, 2005
Hello,
I'm sure this has a simple solution, but iv searched this forum and every solution that i get is filled with code that goes over my head! Well here goes...
I have a main form called expense... which contains a tab control. the tabcontrol in turn has three pages containing a subform each. (lets call them sbfrm1 sbfrm2 and sbrm3.)
All three subforms are based on three different queries (say Qry1 Qry2 and Qry3) but the three queries are based on the same table. this table contains all the expenses incurred over the months across three categories (hence three queries). the subforms are to display these expenses according to categories.. i.e. sbfrm1 displays records pertaining to Category1, sbfrm2 for category2 etc.(the queries ensure that!)
when the main form opens, the subforms display all the records in the table according to category...but not according to the month in which the expenditure was incurred.
I now want to add a feature that enables the user to choose records pertaining to a given month at the click of a button.
for eg. if there is an option group named month, (with toggle buttons as the month names), then if the user selects the month Aug, then immediately the subform1 displays records under category1 for the month Aug? However I want to include an "ALL" option as well whereby all the records are displayed for all months (the category criteria must be maintained at any cost!!!!
Is there a solution that will not use too much code!
Thanks in advance.
View 5 Replies
View Related
May 3, 2014
I'm having a problem get a query to select all of the records it should be.
When I filter the source table (200_STANDARDIZED NRGL) to show the data I want to see (PC2 = 6000; GAAP = 02; CGL = 0950, 2735, 2736, 3500 and 3501; STD VENDOR NAME = blanks), I get 33 records.
NOTE: Had to take the PC2 records that were not '6000' out of the dB I've attached in order to be able to send dB bu the PC2 filter is needed in the complete dB.
When I create a select query to the do the same thing, I get either:3 records (when I set STD VEND NAME to Like '') or 30 records (when I set STD VEND NAME to NOT Like '*' ) I've attached the dB - Query 1 is the subject of bullet 1 above and Query 2 is the subject of bullet 2 above.
BTW, the three records that show up in Query 1 are the same records missing from Query 2.
View 3 Replies
View Related
Apr 4, 2013
I have a Sales Table with below fields, i might have not set it up in the best way possible.
Consumer, Consumer_ID, SaleDate,Prod_Sl#,Prod_Type,Sale Amount
1. I need to update the sales price for each item sold based on category of Product Type, as we are tracking the product with Serial Number.
For an instance if 2 items of Category1 with Prod_Sl# as Sl1 and Sl2 and
2 items of Category 2 with Prod_Sl# as Sl3 and Sl4 are sold.
I need to update the sales price amount for these.
2. I want to accomplish this using a query.
View 1 Replies
View Related
Sep 19, 2013
I have a Union query as follows;
SELECT ALL *
FROM 1st_Lives
UNION SELECT ALL *
FROM 2nd_Lives;
1st Lives has 465,414 records and 2nd Lives has 151,852 records.
When I run the query I only get 604,976 records instead of 617,266 (I basically just want to add the two data items together).
View 1 Replies
View Related
Feb 5, 2014
I'm having a bit of a situation with a select query that I set up.
I have two tables, both with a list of serial ID's.
One is table field is formatted like this:
"B0340 13 453423 X"
The other is formatted like this:
"=B03401345342300"
I wanted a select query that could show me the records in a universal serial like this:
"034013453423"
This leaves out the "spaces", the "B" and the " X". (Couldn't find a way to make Access generate a new field with the serial ID correctly without a query).
So I used the "Mid" expression in a select query and it worked, it showed me the first table in the correct format.I wrote the same "Mid" expression for the other table and it worked too.But, when I ask for the results for both tables in the same query, it shows me much more records than I have(all duplicates). I figured out that when in table one I have 20 records, in table two I have 5 then the query shows 120 results (20 x 5).
This is the code in SQL view:
Code:
SELECT MainDatabase.[Transfusie Eenheid + Specification], (Mid([MainDatabase].[Transfusie Eenheid + Specification], 2, 4) & [MainDatabase].[Transfusie Eenheid + Specification], 7, 2) & [MainDatabase].[Transfusie Eenheid + Specification], 10, 6)) AS [BloedeenheidID MD], ScannedForms.BloedEenheidID, Mid[ScannedForms].[BloedeenheidID], 3, 12) AS [BloedEenheidID SF]
FROM MainDatabase, ScannedForms;
View 4 Replies
View Related
Jan 29, 2015
I have a database with an import process which normalises incoming data and appends to various tables. No issues with that. I also have a function within that process which counts the number of new entries for a summary popup when the process has completed.This works by querying the staging table, prior to the append, into a recordset and using the .RecordCount to increment the count (multiple files can be imported at once so this effectively provides a running count, per file, to give a total for the whole import)
I thought it was working fine but this morning I noticed that the count which appeared on the popup was 1 greater than the number of actual new records. I checked the source files and noticed that, for whatever reason, there was a duplicate entry in there. So I presume that's why the count was out by 1.
There's no integrity issue in the main tables as the composite primary keys ensure that duplication shouldn't be a problem. Indeed, the record in question, duplicated in the source, appears only once in the main table post-import. So not too worried about that.
However, I need the count in the popup to be accurate (it tells the users how many new entries require further investugation). And what's puzzling me is that I use DISTINCT in the query, which I would have thought should eliminate any potential dupes in the recordset and thus provide the correct count. It seems it doesn't?
Code:
Public lngNewBalancesTBI As Long ' Defined in a separate module...
-------
Dim dbs As Database
Dim rst As Recordset
Dim strSQL As String
[code]....
Why the dupe, which is still present in the staging table, also makes it over to the recordset, even though I'm using DISTINCT?
View 14 Replies
View Related
Jan 4, 2014
WinXPPro Sp3
Access 2007
After some research I thought I had found a neat way to SELECT records from a table based on an 'IN' clause and sort them in the same order as the values for the 'IN' clause... i.e.
Code:
SELECT Unique_No, Table_Name, List_Order FROM My_Table
WHERE Table_Name = 'Titles'
AND List_Order IN (3,1,15,4,5,12,7,2)
ORDER BY INSTR('3,1,15,4,5,12,7,2', List_Order)
Unfortunately, this returns list_order 5 just after 15 and list_order 2 just after 12, thus
List_Order
3
1
15
5
4
12
2
7
View 3 Replies
View Related
Jun 20, 2013
I have a simple select query on a SQL table from Access. The query is:
SELECT tbl_Orders.OrderID, tbl_Orders.Approved
FROM tbl_Orders
WHERE (((tbl_Orders.Approved)=0) AND ((tbl_Orders.Completed)<>0))
ORDER BY tbl_Orders.OrderID;
The strange thing is that sometimes it pulls 34 results, and sometimes 38. From what I can tell, it should be pulling all 38.
What can I do to make sure it gets all the records?
View 2 Replies
View Related
May 7, 2013
So I have a table with around 20,000 records and there is a field which holds a phone number for each individual within the organization, I want to run a select query that counts how many are not in the correct format
The format is 10 digits and it must start with a 0
Using Access 2010
View 2 Replies
View Related
Jul 22, 2013
So there's a memo field in my database that has a copies of an entire email message. I was wondering if there was a way for me to search for, extract, and place specific information from the text in the email into a new field automatically for each of them.
View 1 Replies
View Related
May 23, 2014
I am referencing a table output in excel and when I go into Access to see where the table is pulling data from I get stuck. I go into the table in design view but where the table is getting its data from. I need to know which queries it is getting its data.
Access 2003.
View 3 Replies
View Related
Jun 21, 2005
I'm trying to use code to relink the the table but that is not the only table that is linked in the DB. The other linked tables are in other databases so I want to select specific tables to relink as the others may not need it. I alway will want to select the path.
here is an example of the code I'm using I got it from one of the other users here.
View 14 Replies
View Related
May 14, 2013
Is there a way to select non-contiguous records in an Access table or query?
View 3 Replies
View Related
Feb 25, 2015
I have records using a select query that I am sending to a make table. I would like to have those records excluded from being used again for 180 days, at which point they can be used again. Essentially, I have an ID and an email address which gets stored in the Make Table. I would need to ensure that if we send an email out in Week 1, we do not send an email again for another 180 days if there is activity from that same ID. On day 181, the ID/email address can then be resent.
View 6 Replies
View Related
Nov 3, 2014
I was just wondering if this is a possibility to do in one query or if it has to be run from a number of different queries.
I am currently developing a database from scratch for work (with very little Access experience).
The current query I am trying to run, if linked to a number of tables with different information.
What I am trying to do primarily is link stock to a specific "Host Name", "Serial Number" and "Part Description".
In the "Host Name" there is for example - A1-TX10-10001, B1-TX2-10004, C1-TX-10004 - The latter part of the name is a unique identifier number. The first part is the compartment in which the "stock" sits. So you may have all three components (A1-TX1, B1-TX2, C1-TX3) linked to the same unique identifier (10001 for example)
The serial numbers naturally are different for every single one and of course the srial numbers are linked to the "Part Description" - which will read something like....."C1-TX3 Transmitter", "B1-TX2 Combiner" etc.....
When I run the query like this the Host Name (which is also linked to the unique identifier on its own (10001) it returns everything under "A1-TX1-10001"
What I would ideally like to do is write a statement so that if the "Part Description" contains "A1-TX1" it will only return rows that contain "A1-TX1" in the Host Name and the same for "B1-TX2" and "C1-TX3" in the same query.
If "Host Name" contains "A1-TX1" to return "Part Description" to contain "A1-TX1"
View 10 Replies
View Related
May 1, 2013
Is it possible to run a basic select query to pull records based on multiple strings entered by a user?
I have a query with field criteria - Like '*' & [Type In MMDBID:-] & '*'
This allows the user to input one MMDBID and the records are retrieved from the db.
I can also use the OR statement in the same field criteria "AB123" OR "BC123", and all records based on those values are pulled back.
But I cannot get the user to input multiple values and I tried amending the SQL string based on the OR criteria above
SQL statement (Like) is below :
SELECT tblFund.MMDBID, tblFund.[Investment Name], tblCodesLive.[IOE Code], tblCodesLive.[Uptix Code], tblFund.[Red Payment Deadline]
FROM (tblFund INNER JOIN tblCodesLive ON tblFund.MMDBID = tblCodesLive.MMDBID) INNER JOIN tblContact ON (tblFund.MMDBID = tblContact.MMDBID) AND (tblCodesLive.MMDBID = tblContact.MMDBID)
WHERE (((tblFund.MMDBID) Like '*' & [Type In MMDBID:-] & '*') AND ((tblFund.Editing)=False) AND ((tblFund.Closed_Fund)=False));
View 10 Replies
View Related
Nov 14, 2005
Hi
I need to select from a table field of upto 50 characters: the first 15 characters and then the remaining charachters (i.e. after 15...)
I would much apreciate some help...
Thanx
View 9 Replies
View Related
Nov 27, 2013
I need to give the user the ability to select either all of a table say
[tblStores].StoreNo
or only those stores where [tblStores].StoreNo Is Null
I cant for the life of me get my query to accept Null or Is Not Null in the parameter box.
What do I need to do.The end game is to produce a subform to allow users to maintain tblStores
eg
tblStore
StoreNo | StoreNm
000001 | StoreA
<Empty>| StoreB
000003 | StoreC
Null returns
Store B
Is Not Null returns
StoreA
StoreB
StoreC
View 2 Replies
View Related
Nov 30, 2013
Based upon a specific date (varDate), I want to select the record that is active (who drives the lease car).
row 1 user X from 13/11/2013
row 2 user Y from 15/11/2013
row 3 user Z from 17/11/2013
I want to find the active user on a date. So on date 13/11/2013 (=varDate), user X is active, on 14/11/2013 (=varDate), user X is still active, on 15/11/2013 (=varDate), user Y is active, on 16/11/2013 (=varDate), user Y is still active and on 17/11/2013 and later, user Z is active.
View 1 Replies
View Related
Oct 26, 2014
I have generated two queries called "qry_GetWellName_GetAPI" and "qry_GetWellProduction" that extracts all the data I need from a csv to make two tables.
My issue is that I can not gather all the production data into a query formatted properly for a make table query that contains production history by month / api number.
Ideally the data would be placed in a table called tblProductionHistory with the following unique table index --> [api_fk] [data date]. The api_fk would link to the table that was created by extracting well names using qry_GetWellName_GetAPI.
tblProductionHistory field structure I am trying to achieve:
[api_fk]--[data date]--[oil rate]--[gas rate]--[water rate]--[days produced]--[cumulative oil]--[cumulative gas]
Currently the qry_GetWellProduction shows each well name and the year it had production as a separate record from the month names and the month's production values. I need to consolidate the data so each record can be matched to the unique table index.
Is there a sub query I need to use to manufacture a data date for each month that includes the year and last day of that month for that year? Also would I need a separate sub query to match each month's production to the api number?
View 1 Replies
View Related
Jan 21, 2014
I have made a new access 2013 database. I have created a linked table that has imported a substantial amount of data from an external data source, (an Excel spreadsheet). So far no problem. I created a select query that plucked data from the original table mentioned. Again, no problem. Then I decided to create another table, using certain fields only from the select query. Microsoft's guide tells me to start with CREATE, then Table design. I am happy to use just 4 fields from my query, but what I keep ending up with is a table, that, when I double click on it gives me the following:
ID Field1 Field2 Click to add
(New)
It is presumably expecting me to enter an ID number and it will come up with some record, but I want a complete table that should show several hundred records.
View 1 Replies
View Related
Mar 4, 2015
I am looking for a query that will return records from a table that have related records in another table. Opposite to the Unmatched Query Wizard.I have two tables: tblSupplier and tblSupplierProducts.The two tables are related by the field "SupplierId".I need the query to only return Suppliers that have Products.
View 3 Replies
View Related
