i want to count records in progressive access table .in simutanasly column like excel "countif" function if Attached File
Column A Column B
A Count (A) =1
A Count(A)= 2
A Count (A)=3
B Count (B) =1
B Count (B) =2
A Count (A)= 4
I'm trying to do a query to count corresponding records in another table. It works except for returning zeros. I've tried using NZ and switching the type of join, but to no avail.
Here's what I have:
Query A has 3 columns (FU kids)
AlphaID
DtcCtr (a Location Code)
DlsDtc (a Date of change)
Table A has many columns, but I'm only using a few. (dbo_MNCPSTNote)
AlphaID
DtcCtr (the same Location Code)
ServDate (the date I'm trying to count)
Here's what I have:
SELECT [FU kids].AlphaID, [FU kids].DtcCtr, Count(dbo_MNCPSTNote.ServDate) AS CountOfServDate
FROM dbo_MNCPSTNote RIGHT JOIN [FU kids] ON dbo_MNCPSTNote.AlphaID = [FU kids].AlphaID
WHERE (((dbo_MNCPSTNote.Center)=[FU kids]![DtcCtr])) OR (((dbo_MNCPSTNote.ServDate)>[FU kids]![DlsDtc]))
GROUP BY [FU kids].AlphaID, [FU kids].DtcCtr;
I want to know the count, including zero, of the number of records based on ServDate for each AlphaID in Query A.
I didn't create the tables and have no control over how they are designed/organized.
In one of my tables I have a Yes/No field that users click if a job has been Issued [chkIssued] and a number field to show the week number (can be 1 - 52) that it was sent out [intIssuedWeek]. There is also a Yes/No field for when then job has been completed [chkCompleted] and a number field for the week number when completed [intWeekCompleted].
The week number that a job was completed in should be the one directly after the week it was issued in, for example a job issued in week 36 should be returned in week 37.
I have set up a query to show how many have been issued in a week and also how many were returned the following week. I want to be able to extend this query show that it shows the progress of work over the past 4 weeks, but I don't know how to do this. The main aim is to see how many jobs are outstanding.
Sample data: Week 36 Issued 20 Week 37 Completed 16
so say week 37 another 20 are issued I want it to show 24, as 20 have been issued and 4 are uncompleted from the previous week.
I hope I have made myself clear and not confused you too much. Any help on how I could do this would be greatly appreciated.
I have two queries, let's called them Query1 and Query2. I'd like to create a third query that looks like this:
Code:
File RecordCount Date
Query1.txt ### (Current Date)
Query2.txt ### (Current Date)
I know I can use concatenation and a date function for the first and third fields, so my main question is the proper syntax in order to get this layout.
I have a bunch of records in 1 table. Some records could have 1 duplicate field. What I am trying to do is create a query that produces the total or count in a new column. For example:
ID
FName
SName
Account#
If account appears more than once, I would like a new column to count the number of times in total that record appears. Then use this in a report afterwards.
Is this possible?
I have created a booking system for a set of resources for schools. Most schools have a membership which entitles them to 2 free sets. I have a booking form with a membership subform (membership table), and a booking details subform (kitloan table).
Once a school is selected on the main form, the membership subform shows the most recent record for that school based on schoolID.I want to display the number of sets they have already had within their membership period (can start at any time of the year, and lasts for 1 year) on the membership subform, so we know how many free ones they have left.
I therefore need to count the number of KitBkID (ID of the booking) in the Kitloan table where SchoolID = the SchoolID displayed on the membership subform, and the DateOut (booking date on kitloan table) is between the DateJoined and DateRenewal displayed on the membership subform (from membership table).
I can do this with a query which works when run and provided with the parameters SchoolID, DateJoined, and DateRenewal.
SELECT Count(Kitloan.KitBkID) AS CountOfKitBkID, Kitloan.SchoolID, Kitloan.DateOut
FROM Kitloan INNER JOIN Membership ON Kitloan.SchoolID = Membership.SCHOOLID
GROUP BY Kitloan.SchoolID, Kitloan.DateOut
HAVING (((Kitloan.SchoolID)=[Me].[SCHOOLID]) AND ((Kitloan.DateOut) Between [Me].[DateJoined] And [Me].[DateRenewal]));
What I can't do is get it to run on the form and take those values from the form.From the searching I've done, I'm thinking a DCount should be the way to go, but I cannot get the criteria right. I created a query (KitloanCountQry) so that criteria could come from both the kitloan and membership tables.
SELECT Kitloan.KitBkID, Kitloan.SchoolID, Membership.DateJoined, Membership.SCHOOLID, Kitloan.DateOut
FROM Kitloan INNER JOIN Membership ON Kitloan.SchoolID = Membership.SCHOOLID;
I have put the DCount as the control source for a textbox on the Membership subform (but have tried it in VBA too):
=DCount("KitBkID","KitloanCountQry")
This works but obviously gives me the total for all bookings.
[code]....
Although I have to admit to getting lost in the syntax. This produces #Error.
I have a table with the following values.
EMPLLOYEE_ID
JOB
PAY_DATE
LOCATION
Most employees have 10 to 15 rows. I only want to pull ALL rows for employees ONLY if there is a distinct count from DATE_PAID greater than 1. There are cases where an employee might have two pay checks generarted for the same PAY_DATE.
I am wanting to display in a text box or on my report the total number or records in my database. Also I have some buttons that filter the results a little, I'm wanting to display the number after I hit the button(s). Would I just add the query to the end of each button I have?
View 6 Replies View RelatedIf I have a table called "Calls" with an autonumber and another field with names for stores like this:
1 Hobby Mart
2 Peter's Store
3 Hobby lobby
4 Hobby Mart
5 Peter's Store
How can I build a query to count the number of different store names?
For example, in this case I need the query to return the number 3.
I did a calculation in a query that gives me how many minutes/hours it took to process records. Now what I need to do is show how many records took only 0-2 hours to process. 2-4 hours to process. 4-6 hours to process etc.
View 2 Replies View RelatedGood day,
I have a sub-routine created on the form labelled frmenrollcenter and inside this routine I want to count the records in tblec based on the value in "txtextl" textbox. Then I want to display this value in a message on the screen. I was wondering if anyone knows the function that can make this happen.
Thanks
Hello,
My database has two tables: MASTER1 and MASTER2. They are used for a list of clients. They contain general info like names, address and SSN.
I use MASTER1 to add new data while MASTER2 (via an append query) to save some data which does not need to be destroyed.
For both tables I have designed a form and each table has the ID as PK and a field SSN.
I would to add a function that while I am in form MASTER1, it could count via a control (txtbox) the number of records with the same SSN of the active form (MASTER1) in table MASTER2.
Any help? Thank you.
How do I count the number of records with values within specified ranges?
My database contains a field with values ranging from say 1 to 1000. I need to write a query to show count the number of records with values in ranges I specify in the query.
I'm looking for output such as
<100 - 50 records
101 - 500 - 30 records
501 -1000 - 50 records
We have a field that we track paperwork with that is 9 characters. The first 4 characters are a 'julian date', the 5th character is a dash and the last 4 characters are sequential.
Example:
For today, we would use 4085-0001, 4085-0002, 4085-0003, etc.
For yesterday: 4084-0001, 4084-0002, etc.
I have a query set up that will pull records with a julian date of today-1 and today-7 that works. So a result I may get:
4084-0001
4084-0002
4081-0000
4078-0000
4078-0001
4078-0002
I tried formatting the source field with Left -4, but it only shows the first four characters in the result:
4084
4084
4081
4078
4078
4078
How can I count the number of records each day based on only the first four characters? Example:
4084 = 2
4081 = 1
4078 = 3
I am looking to achieve a column within a query which gives me the count of records that are equal to a string in a different field, e.g.
Field1 Count
aaa21 3
aab01 2
aaa21 3
aaa21 3
aab01 2
I've got a table with 23 columns. Column 1 is the ID row which has a unique client ID in it. Then we've got a column called 1st_Reason and one that goes with it called 1st_Transfer_Date. This pair repeats for 2 through 10. Each of the Reason columns can have a set value, for example "First Processor".
What I need to do is create a date with months on the Y axis and the 5 different reasons on the X axis. I need to count the number of "First Processor" across all 10 Reason columns for each month. I would need to repeat that for each other reason type, but if I can get one to work I can simply change the reason type.
I'm pretty new at Access queries so I don't know how to use a count statement to pull from all those queries AND get the corresponding date to be in range.
Hello all. I am new here. I am making a database involving some countries. What I would like to know is:
How could I list the records present in a table and then count how often they appear. For example:
http://i11.tinypic.com/4lp849e.png
I may just have to list the records of Top 20 column to see what records appear in the table, but how do I count them? Say, for Peru, it appears in all the columns...
EDIT: I forgot to mention that I would not like to manually type in the records to count them, but rather use the list and for each record in that list, count how many times that record in present in that table.
Friends,
I have a table with many fields and would like to count certain records without having to create queries. I thought there may be some way via vba code or other function.
My table has 5 fields and I would like to create a form on which I will place 5 txtbox controls. Each one will count the number of records according to a specific criteria.
Example.
Field Cities. I need to count how many records are showing LONDON as criteria.
Is there a way I can do this? I have tried via Dlookup but it's slow and do not know how to place the criteria function to:
=DCount("[field]","table")
THanks for your help.
How can i count records in a table like countif function in excel
ex.
records Count
Row 1 A 1
Row 2 A 2
Row 3 A 3
Row 4 B 1
Row 5 B 2
Row 6 A 4
So I have a table with around 20,000 records and there is a field which holds a phone number for each individual within the organization, I want to run a select query that counts how many are not in the correct format
The format is 10 digits and it must start with a 0
Using Access 2010
I need to use an update query to count the number of selected records and then place this number in another table using an update query. The table has a field with a 1 in that field for all records to do the counting. I know I can use forms and subforms, but the data needed is too massive to be practical. Thanks Abe
View 2 Replies View RelatedI have the following code
SELECT Count(T_STUDENTS.studentsID) AS res1yes, T_COACHING.COACH1res, T_COACHING.COACH1port, T_COACHING.COACHworkgroup
FROM T_STUDENTS, T_COACHING
WHERE (((T_STUDENTS.res_vrijstelling)=False) And ((T_STUDENTS.stud_year)="1") And ((T_STUDENTS.stud_coach)=forms!F_cboCOACHING!cboCOACHING))
GROUP BY T_COACHING.COACH1res, T_COACHING.COACH1port, T_COACHING.COACHworkgroup;
It runs fine, untill the moment the count is 0. At that point it breaks the form. How can i tell access to deal with this? Somehow i need to replace the count result with 0 if there are no records that meet the criteria.
I have a query it correctly displays output as i require. i want to update/store the output query to a table named ustate. my query is as under
Code:
SELECT Auth.nit, UC+UL+UC AS Aut, (select count(NO) from Pers where nit=Auth.nit and rOrd>4) AS Present, (SELECT COUNT(no) FROM pers WHERE nitFrom = auth.nit) AS DIn, (SELECT COUNT(no) FROM pers WHERE nitTo = auth.nit) AS DOut, Present-Dout+Din AS Held
FROM Auth
WHERE (((Auth.Type)='tata'))
ORDER BY Auth.nit;
I have a table which specifies the delivery date
I have a from that allows you to choose a year and a month.
I have an unbound textbox which I wan to display the count
I want to be able to count all the records from a table with the year and month specified in the comboboxes and display this in the texbox.
i''m currently trying to count the amount of records that fall in each month in the date complete field. i am currently using a count query and it it bringing up the dates not the month.
View 1 Replies View Relatedthe project I have comprises four seperate databases all linked but kept apart for logic and data reasons. I must have rapidly approaching 300k records across all of them. As a result I am trying to extract on a regular basis (monthly) the dimensions of each database. Specifically, I want to be able to produce for each database;The number of tables (I have two types data and reference, it would be nice to be able to split the result).The number of fields per table.The number of records per tableI am not really interested at this point about other database objects, such as queries or reports.
View 11 Replies View Related