Query Criteria Inclues Time
Feb 16, 2007
I am running a query linked to a mainframe database. The Entered Date field is formatted like this: 2/14/2007 1:14:00 AM. I want to run my query to show all data greater than an entered date at 5AM. So I tried using this for a query criteria >[ENTER START DATE]+#5:00:00 AM# , but Access says the query criteria is typed incorrectly or is too complex. Below are variations of the criteria I tried to use but none would work.
>[ENTER START DATE]+(#5:00:00 AM#)
>([ENTER START DATE])+(#5:00:00 AM#)
This criteria does work >(Date()-1)+#5:00:00 AM# , but I really want the user to be prompted to enter a start date because on Monday the report has to go back 3 days, if there's a holiday it has to go back 2 days, etc. The reports always have to begin at 5am of the starting date.
Any suggestions?
Thanks,
Jim
View Replies
ADVERTISEMENT
Aug 17, 2006
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only.
([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null)
How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
View 10 Replies
View Related
May 13, 2005
I'm trying to setup a query to pull only the records that have the latest date in Time Scanned for each different serial number.
I have a table with 4 fields: Serial Number, Model Number, Location and Time Scanned. Some records will have the same Serial Number repeated with different Model numbers,locations and times scanned.
I can't figure out how to query only the Last Time Scanned for each different Serial Number. I've tried using "Last" for critria on the time scanned field, but I need that for each different serial number.
It's probably easy...but I'm not able to get it. Thanks!
View 2 Replies
View Related
Apr 21, 2015
How may I write a criteria in the query where I can pull records with date/time data type (01/31/15 1:30:23 PM) based on today's date?
Example using today's date (4/21/15):
Date()= 4/21/15
The query will pull these records:
ABC 4/21/15 9:14:40 AM
DEF 4/21/15 10:50:02 AM
GHI 4/21/15 2:32:35 PM
etc.
The time does not matter as long as the date is 4/21/15.
I have tried using these formulas:
=Date() & *
=Date(Now)
but these are no success.
View 3 Replies
View Related
Jul 9, 2013
ID Up Time Down Time
John 18:00 15:00
Kelvin 08:00 08:05
Melisa 23:00 02:00
This is the Table , i need the Query result show IF [Up Time]-[Down Time] is >=3 hrs
Like Below :
ID Up Time Down Time
John 18:00 15:00
Melisa 23:00 02:00
IDUp TimeDown TimeJohn18:0015:00Melisa23:0002:00
I tried DateDiff("h",[Up Time],[Down Time]) in Field but POP out with error "Syntax error (comma) in query expression 'Table1.[DateDiff("h",[Up Time],[Down Time])]' " ...
View 9 Replies
View Related
Jul 24, 2014
I have a form (frmMetrics) with 2 Combo Boxes: "Year" and "Quarter" These are just number fields (which might be my problem?)
I have a date/time field in a query, and I want the criteria to be based off the year and quarter selected in frmMetrics.
View 2 Replies
View Related
Sep 6, 2005
HI i was wondering if anyone could help. I am doing a database for a fuels company. They want to know when fuel has been dry for over 24 hours. There is a 'dry time' field which is actually calculated off the runout date and the delivery date. I thought i would simply have to put >24:00 in the dry time field, but this does not work. The field type has been set to text, and so im assuming this is why this does not work. There are over 8000 records so i can't obviously change these manually. I am wondering if there is anyway around this?
View 14 Replies
View Related
Dec 27, 2005
Hi Guys,
Does anyone know how to write the criteria which includes both the date and time. for example, I want it to be the system's date and my specified date. e.g. (date() 14:00:00)
What will be the correct syntax?
Thx!!!:D
View 2 Replies
View Related
Dec 28, 2006
I'm trying to build a query for a customer that will automatically run without making them enter a date and time.
Between [Enter Start Date] And [Enter End Date]
Is there a way to make a query auto run a date and time with out entering a date and time?
Thank you
View 6 Replies
View Related
Sep 13, 2006
OK... what am I forgetting?
I have a linked SQL table with a Date/Time field called DATE. ALL I WANT TO DO is pluck all the records with a single date from that table.
Predictibly, the date field has values like this:
9/11/2006 12:40:46 PM
If in the MS-Access query I use criteria of #9/11/2006# I get other dates also. I have tried variations on Date() or DatePart but those either fail or don't work. Sheesh.
ULTIMATELY, I want to restrict records to a specific date, and then a certain hour of that date, so if you can include this bit of additional logic in your response, that'd be great too. Note: I am trying to structure a query, not write code.
Thanks!
View 2 Replies
View Related
Jan 9, 2008
Hello, I am having a little trouble trying to get a criteria to work with a query in a database that someone else has passed to me.
In an InputTable there is in a field called DateIn with properties of date and time (general date). I want to be able to create a report that will allow the user to just chose to run the query for one day. Eg. Run the query using a dateinput of 2/01/2008. It just returns all of the records and ignores the criteria. I do not normally have this problem and was wondering where I should be looking.
SELECT InputTable.OrderNo, InputTable.[Customer Name], InputTable.Postcode, InputTable.ReturnsRef, InputTable.Description, InputTable.Unwanted, InputTable.POReturn, InputTable.Faullty, InputTable.Damaged, InputTable.Mispicked, InputTable.Replacement, InputTable.ItemRefund, InputTable.PostageRefund, InputTable.QReason, InputTable.QResolution, InputTable.DateIn, InputTable.Type
FROM InputTable WHERE (((InputTable.DateIn)=#1/2/2008#)
Many thanks in anticipation.
View 10 Replies
View Related
Aug 10, 2005
I am creating a query with criteria for a dates column. The column cotaining dates in my Table has many empty fields. I want to limit the criteria for my dates to >#1/1/2004#, but I don't want Access to exclude all the empty fields because I want all the data displayed for the purposes of my report.
What do I do? I'm not terribly familiar with Access, so please explain as completely as possible. Thanks in advance!
View 3 Replies
View Related
Jan 30, 2008
Hi there
I have created a database in Access XP (2002). In a nutshell, the database records numbers of people attending a seminar; which can take place any number of times per week, and so hence can take place any number of times per month.
I have set up the query so that it can run immediately after a seminar to show the attendants who attended the seminar on that current date "Date()" in the criteria box. However, how would I go about setting it up so that it shows who attended every seminar in the current week or month?
View 1 Replies
View Related
May 2, 2014
I have this
Code:
If Not IsNull(strCount = DLookup("[Number_Of_Records]", "All_Booked_Callbacks ", "[CallBack_Date] =#" & Me.CB_DAte.Value & "#" _
& " And [CallBack_Time] = #" & Me.CB_Time.Value & "#")) Then strCount = DLookup("[Number_Of_Records]", "All_Booked_Callbacks ", "[CallBack_Date] =#" & Me.CB_DAte.Value & "#" _
& " And [CallBack_Time] = #" & Me.CB_Time.Value & "#") Else strCount = "0"
All_Booked_Callbacks is a query which has a date and time columns and count of callbacks for that day and time, this always returns 0
View 7 Replies
View Related
Aug 11, 2014
I am getting Run-time error '3464': Data type mismatch in criteria expression when i execute the code:
Option Compare Database
Dim rst As DAO.Recordset
Dim rst1 As DAO.Recordset
Public verificacoes As Boolean
[code]....
View 5 Replies
View Related
Oct 21, 2006
I have set up a database that stores actions (i.e jobs). In the table; two of the fields are...'required completion date' and 'actual completion date'. I wish to lookup, by using a query, all of the open actions (those which havent yet been complete (i.e the 'actual completion date' is null)) and then later on all those which are overdue (i.e the 'actual completion date' is null And the 'required completion date' <today....this being the criteria for an overdue action).
However, I have used a form which has a combo box which contains the values open and overdue. When a selection has been made I want a form to display with the results depending on the selection that has been made. I am capable of creating a form based on a query, but am unsure of how to construct the query with the correct criteria based on the option that is selected from the form.
Any help would gratefully be appreciated. Thanks
View 5 Replies
View Related
Nov 3, 2014
I have finger print machine and i already connect to it and get all log.then i tray to get data and here is the code that im using
SELECT Format(CHECKINOUT.CHECKTIME,"dd/mm/yyyy") AS CDate, IIf([CHECKINOUT.CHECKTYPE]=I,Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm")) AS StartTime, Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm") AS EndTime, USERINFO.USERID, USERINFO.Name, CHECKINOUT.CHECKTYPE
FROM CHECKINOUT INNER JOIN USERINFO ON CHECKINOUT.USERID=USERINFO.USERID
WHERE (((Format([CHECKINOUT].[CHECKTIME],"dd/mm/yyyy"))='10/04/2014'));
how i get end time due to CHECKTYPE]=O
View 1 Replies
View Related
Aug 20, 2007
I have data for hundreds of stores. The data was pulled for the top 15 items by store, so I cannot obtain only the top 5 items that I need. How can I query this data to extract only the top (or bottom) 5 Subjects, by store, based on the percentage column?
StoreSubjectSalesSales %
1516Fiction56431.5-24.15%
1516Audio Unabridged1650.8-231.04%
1516History / Military History10081.1-29.99%
1516Role Playing / Graphic Novels14773.9-20.27%
1516Mystery13152.6-19.84%
1516Audio Abridged1785.9-141.84%
1516SciFi / Fantasy27535.3-7.93%
1516Juv Audio/Video1580.6-100.13%
1516Biography8103.6-15.89%
1516Sports7910.8-15.64%
1516Current Affairs / Law8141.9-14.34%
1516Reference7183-16.22%
1516Juv Non-Bk4585.9-25.02%
1516Science / Tech2961.4-33.98%
1516Movies / TV / Music / Dance3395.3-29.46%
1872Fiction307344.3-7.49%
1872Business134307.5-13.48%
1872Psych / Self Improvement100650.4-10.05%
1872Audio Unabridged29165.9-27.32%
1872Cookbooks57463.3-13.56%
1872Computers59235.7-12.37%
1872Regional59883.4-11.22%
1872Health & Fitness64713.8-10.29%
1872Maps19358.4-27.66%
1872Current Affairs / Law47927.1-11.08%
1872Travel Foreign42583.7-12.27%
1872Religion / Bibles80255.6-6.07%
1872SciFi / Fantasy67641.4-6.49%
1872Study Aids / Notes38299-11.24%
1872Games41745.1-9.79%
View 2 Replies
View Related
Jun 7, 2006
I have a link table with a field in GMT time. I want to convert the times to local time in a query. I know that I should use DateAdd, but I am just wondering how to know summer and winter time. On the summer our local time is +2 GMT and on winter +1.
View 14 Replies
View Related
May 23, 2006
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still shorttime but when you read the time within the code it comes out in AM/PM format. Also, when the defaul tiem should be #20:00:00# but this changes to #8:00:00 PM#
Weirdly though, when you just open the table, the times are in the correct shorttime format.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
This screen shot may help:
View 2 Replies
View Related
May 23, 2006
I have an application with a backend db on PC 1, and the same application on PC 2 linked to the backend db on PC 1 via the network.
The link works fine but the time formats are different.
On PC 1 the time format is shortime and displays as it should i.e. in 24 hour clock format
However on PC 2, opening the same database via the network, the time format is still short time but the format is in AM/PM or medium time.
Guessing, it must be a setting within the main core of Access 2003 that is different between the 2 instances?
Any ideas?
View 1 Replies
View Related
Apr 2, 2008
I am trying to use a single record and cell of data generated from a query as criteria in another query but can't figure out how to do it? Is there a way to reference a query field in the criteria in design view of another query?
Details:
I have a table of data for each month with supplier codes in each table, but no date field.
I am trying to build a query that will automatically pick the most recent month of data. I have built a query that uses an iif statement in SQL assigning a number to the most recent month of data and then I am using the max filter in that query to show the single highest number (But this logic misses suppliers some suppliers but does assign a number to the most recent set of data). In this case its 2 for february data. I want to use this digit to filter a seperate criteria that will show me all the supplier codes for the month of february. One problem is that some suppliers are in every month others, come and go throughout the year, so I have to assign this criteria for each month. Therefore I want to use the 2 from the first query and plug that into each criteria section under each month field of the second query.
The other option that I can think of but can't seem to find a fix, is to merge all 12 tables so there are duplicate entries and can have a date or number assigned for each month that the supplier code shows up, then just use the max number. I can't seem to find a way to add all the codes creating duplicates into one field. I used a union query but there are no duplicates with this method thus foiling my plan.
Please help
Thanks for reading
View 1 Replies
View Related
Sep 29, 2005
Ok, this might need to be in the macro section or something, but just incase, I have a query that I want to run at about 10pm every night (when everyone has gone home) , to make it even more complicated it queries from sage and creates a table each night (that i want to overwrite the old table) and it will need to enter in the sage login information :(
Does anyone know how to do this as to be honest, it has me at a bit of a loose end, I guess it would be a macro, but I have no idea of the commands used
View 1 Replies
View Related
Jan 25, 2006
I have a table with StartTime and EndTime, can i set up a query to show records between those times?
View 2 Replies
View Related
Mar 13, 2006
Hi
I have a DB where I take orders throughout the day and the time is stored in hh:mm:ss format.
Anyone know of a query that I can run that will show me how many oders between certain time? I.e. between 18:00:00 and 18:59:59
Thank you if you can help me!!
Ben
View 1 Replies
View Related
Mar 30, 2007
I have a table that consists of [employee], [scheduledate], [starttime] and [endtime]. I need to query this table to get the total of all employees working during a certain period of time (ex. 1400 - 2200). I have been pondering this for quite a while and have yet to come up with something.
Any help you can provide would be greatly appreciated.
View 8 Replies
View Related
