I am trying to design a report that will Give information about down time and work time during the day.
I have three tables that I am trying to query:
TimeSheet - Employee name, date, etc.TimeSheetSub - Times worked (related to TimeSheet)Orders - Including Start and Complete dates and timesI want to find out on TimeSheet.Date Between TimeSheetSub.Arrived And TimeSheetSub.Departed how many minutes were worked on an order and how many many were not (Orders.Start And Orders.Complete).
When I try to combine these three tables in a query, though, it either ends with tons of records or doesn't work because the tables are unrelated. I was able to do it by making a subquery for the Orders part, but this will not work to make a report.
Any help on this matter would be greatly appreciated!
I have three tables DriversName, Route and Orderlines. My job, if I should accept, is to create a form for the dispatcher to assign a driver and a route to each order. Preferably in a query so I can create reports based on Route and Driver, for the loaders & production, and Driver and Route for the driver.
I have a nice query already built to capture the order lines to be delivered daily, averaging around 800 lines. My problem is relationship. There is no relationship to Orders from either the DriversName or Route tables. Unfortunately the Orders table cannot be added to as the next data download would just remove the fields. I have tried just to slam in the tables in my query but of course I get a repeat data line for every driver name and Route letter.
I need this form to have the dispatcher call up the order by number and have two comboboxes for them to lookup and assign order numbers to Driver and Route. Thanks in advance for any suggestions.
My question is, does someone have a suggestion as to how I could build a relationship of Drivers and Routes to the Order query?
Im a new user to access and I was wondering if someone could tell me if it is possible to put two completly unrelated tables into a form. All I want to be able to do is look at the information from both at the same time without having to switch between forms. Ill apreciate any help you can give. Thanks.
I am trying to take similar fields from unrelated tables. both fields contain information about the age of my clients. The tables they are in are unrelated, as they are different types of clients, and therefore can not find anyway to relate the tables. I need to come up with a total number of clients at particular age groups. Meaning i need to know how many clients from both tables are between the ages of 8-20, even though the records have no relation. All i need is a count, i dont need to display the records, i dont need to change anything, I just need to know how many.
I am fairly new to Access 2013 but am trying to create a query that will select random records from three totally unrelated tables and display the results together as if one table -- think video slot machine wheels. Each table has two fields - ID which is the primary key and NAME. The data in the tables are names of states, names of colors, and types of animals. Each table has a different number of records. My end result is a table that selects X number of random records from each table and displays them side by side like this:
Desired Result: Animal Color State cat red Ohio dog blue Texas fox green Iowa
I have been able to create three individual queries that will pull X number of random records by using:
SELECT TOP 10 Animals.[ID], Animals.[Name] FROM Animals ORDER BY Rnd(-(100000*[ID])*Time()); SELECT TOP 10 Colors.[ID], Colors.[Name] FROM Colors ORDER BY Rnd(-(100000*[ID])*Time()); SELECT TOP 10 States.[ID], States.[LongName] FROM States ORDER BY Rnd(-(100000*[ID])*Time());
Using the three queries above I get three separate lists. how to make one query that will randomly pull from all three tables and make the display above?
Hi all, I have a problem in returning values from 2 different tables because they are not related. Let me explain:
I'm trying to do "Payment Due" query by substracting the amount in the "Cost" table with the amount in the "Payment" table ([CostAmount]-[PaymentAmount]). However, since no payment has been made, the table contains no related record.
At first I thought the problem lies in null values the table return hence I tried to use NZ function to convert null to zeros. Then I realised that no values has been returned from the table due to no related record available.
A small issue I was wondering of for a few day . Is it possible in SQL query to SELECT multiple fields from multiple tables ? Example for the question is
Code:
dim my_var as String my_var = "SELECT Emp_FName , Emp_LName , Emp_Adress " _ & " FROM Table1 " _ & " AND Emp_Date_Of_Payment , Emp_Sum_Of_Payment " _ & "FROM Table2 " _ & " WHERE Emp_ID = 3 "
Is this code actually valid in SQL gramatics , and is it usable if passed to a Recordset variable ( rs = CurrentDB.OpenRecordset(my_var) ) ? Just FYI - The two tables are not related and I want to keep them that way (If possible relate their records just via SQL/Vba )
I have two tables with dates. Between (!) every two following dates in table1, I want to know the number of dates in table2. How do I write an SQL query for this? The tables I have are up to a few hundred records in table 1 and a few thousand records in table2. So to prevent that this takes hours I need a fast query.
To explain the query I need, for example: table1 01/01/2014 15/01/2014 17/01/2014 30/01/2014
Explanation: Between 01/01/2014 and 15/01/2014 in table 1 there are 2 dates in table2 (01/01/2014 is not included between the dates) Between 15/01/2014 and 17/01/2014 in table 1 there are 0 dates in table 2 Between 17/01/2014 and 30/01/2014 in table 1 there are 4 dates in table 2
I have a complex database app that has a form called from the main form. It requires two inputs: BeginningDate and EndingDate and I use a calendar picker for date selection. Using data assigned to a variable, I build the SQL query in VBA. The result is:
Code: SELECT [1733_All Print Orders].[Application], Sum([1733_All Print Orders].[TotalImages]) AS SumOfCCPC FROM [1733_All Print Orders] WHERE [Application] = 'CCPC' AND [StatementDate] >= #9/3/2013# AND [StatementDate] <= #9/30/2013# GROUP BY [1733_All Print Orders];[Application]
[1733_All Print Orders] is a defined query that combines 4 tables together and there are data that falls within the dates for CCPC. But the query returns no records.
I pasted the query to the query builder and using different combinations, I isolated that the [StatementDate] >= #9/3/2013# portion is what returns no records
To complicate matters even worse, prior to today, it worked. I made some adds and changes to another area of the application, but did not touch this code.
I have just started using Access 2010. I need to calculate student's ages from their date of birth to today's date. I have a column set up for the date of birth but can't figure out how to get this figure.
I need to have a field show up in my report that is unrelated to all the other information in the report. It is a one-time entry that the person enters upon opening the database. It's basically the expected amount of work we'll be doing for the year. I need to display that at the top of my report and then utilize that number for calculations with other fields in the report to produce a couple of extra calculated fields in the report. I've tried it a few ways and I've either gotten #name? or #error.
This may be a simple question, but I'm not sure what to even search for. I have a form with multiple subforms. All the subforms have related fields that are linked via relationships. But one subform has no fields in common with the parent form.
I need to be able to have the subform update itself whenever the record is changed on the parent form. I can't figure out which event procedure to use. It updates correctly if I assign my procedure to the form_click sub, and then click each time I want it updated, but that's a pain. I've tried on load, on data change, on activate, on data set change, and a couple others, but nothing works automatically.
How can I make the subform run a subroutine each time the parent form changes records?
I have a 'Services' subform that allows a user to enter payment information, but the amount entered is over a specified amount then a field's value in another data is supposed to change (in this case, the 'Contract Status' should change from its default 'Active' to 'Void'). I was able to get an error message to appear upon this occurrence, but I have no idea how to change the value in the other table. here is my code:
Private Sub MaxComp_AfterUpdate() If Me.MaxComp > 50000 Then MsgBox "The specified amount is above the $50,000.00 limit. This contract will be flagged and reviewed by HCC to ensure compliance.", vbExclamation, "FMV Limit Exceeded" '*** [sbfrmContracts]![Contracts]![ContractStatus] = "VOID" End If
End Sub
***:This is the line I attempted to use to change the field value on the other table
I have tried to combine data from 3 different tables (unrelated) to make a new one. However, as I understood I can not do this because these 3 tables are unrelated. In my case my 3 tables are for 3 labs' material requirements. I am planning that each lab will fill a form which directly related to there field and direct to me. That is why I intend to have separate tables for each. However, I want to create a table where I will be able to see all the requirements of different Labs altogether. This new table will be kind of Orders.
I have a form based on Table A. When a yes/no tick is clicked in the form, I want to delete a record from Table B. The tables are joined by ID numbers.
I am trying to link two unrelated sub forms to a main form so I am able to query data all at once and make a report that displays all this data at once. I do not know if this is possible. I will tell you to the best of my ability about what I have going on.
My main form is a shift report. The primary key is a auto number ID. The rest of the fields are date, name, shift, vehicle. etc.
The first sub form is area attendance. Field are as follows auto number ID (primary key), report ID(which comes from the main form, linked), the area, and the area attendance.
The second sub form is the event log. Fields are as follows auto number ID (primary key), report ID(which comes from the main form, linked), time in, and events.
My relationship now is simply primary key from the shift report (the autonumber) going to the first and second subforms report ID's.
Problem is I can not query two distinct subforms like this (I realized).
frmOperations allows the user to assign a manager to an operation by selecting the manager record from a combobox. Occasionally the user may need to setup a new Manager record if one hasn't been setup already. In this case there is a "New" "button" (it's actually a label with an on click event) that the user can click to open frmManagers and add the new manager record.
The code to open frmManagers is:
Private Sub lblNewManager_Click() DoCmd.OpenForm "frmManagers", acNormal, , , acFormAdd, acDialog Forms!frmManagers!cboMoveTo.Visible = False Forms!frmManagers!lblManagers.Visible = True End Sub
Once frmManagers is open the user creates the new Manager record and then closes the form using a similar label with an on click event:
Code: Private Sub lblClose_Click() DoCmd.Close acForm, "frmManagers", acSaveNo End Sub
frmMangers also has an OnClose event that will refresh any comboboxes on other forms that refer to tblManagers to make sure that new Manager records will be available immediately for the user to choose from:
Code: Private Sub Form_Close() If CurrentProject.AllForms("frmPlants").IsLoaded Then Forms!frmPlants!cboPlantManager.Requery Forms!frmPlants!cboQCManager.Requery
[Code] .....
So the problem comes when the user clicks the Close label (acting like a button) on the frmManagers. The code successfully closes the form and the on close event successfully refreshes any comboboxes on forms that may be open, but then for some reason it attempts to run again or perhaps continue running the onClick event that opens frmManagers. Since the form is already closed it gets hung up on trying to change the visible properties of the controls and the code fails.
My Access 2007 database with one main table. There are associated queries and reports that sort under that table when I have tables and related views checked. The problem I am seeing is some clearly related objects fall under unrelated objects and not with the table.
Short of using a custom group and sorting them manually?
I am building a database and am trying to automate month names and years to appear in my table upon adding a new record. I have the code built to input the data I am calling from other tables, and have functioned it to work on a button click. Now I want the record to capture the current date and year everytime a new record is added and input that information into the respective fields.
I am creating a database and I need to know figures at the end of each week on staff performance.
How will I do this as I have to report to my bosses at the end of each week what targets have been hit.
The trouble I am having is generating this date at the start of each week, the figures have to stay on the system so I would require a new column of information at the beggining of each week. Can this be done as I am really struggling or am I asking to much from access, I am a begginer with a small amount of knowledge and I am using 2003 access
Thanks for any help and I hope you underdstand what I am trying to do
Hi there, just a quick question really. I have got a start date and an end date field in a table both in Date/Time data type. Can i validate the end date so that it cannot be longer than 5 days after the start date, that has been entered. Or is this impossible to do in a table?
I would like to count only dates where the Close Date is less than or equal to the Target Date. Here is what I have done, but it does not work. any ideas how I might get this to work?
SELECT A.[SCA_Open Issue Tbl.ID] AS [IDCount], A.[Criticality of Risk] AS [Criticality of Risk], A.[Database] As [Database], A.[Risk_assumed_without_mitigation] As [Risk Assumed WO Mitigation], A.[OTS] As [OTS], A.[Issue Closed Date] As [Close Date], A.[Targeted Completion Date] As [Target Date] FROM [EOY Closed SC&A Issues] A
UNION ALL SELECT B.[RefID] AS IDCount, B.[complexity_desc] AS [Criticality of Risk], B.[Database] As [Database], 0 As [Risk Assumed WO Mitigation], B.[OTS] As [OTS], B.[EndDate] As [Close Date], B.[TargetEndDate] As [Target Date] FROM [EOY Closed Risk Assessments] B
WHERE [Close Date] BETWEEN Date() <= [Target Date];
I have 2 tables. One has a single column that contains week starting dates for 18 months. The other table has a customer, start date, end date and hours worked fields. I want to create a table that shows by week starting in table 1 the customer and number of hours worked each week divided by the number of weeks specified by the date range in table 2. The dates used in table two match those in table 1.
The database I'm working on is used for personnel budget projections. Because some employees are hired mid-year, I need to be able to use various dates in my projection calculations.
I have 3 different tables - one with the employee start date, the other with the fiscal year start date, and the last with the start date of certain special pay tables. In order for my projections to work correctly, I'll need to return in a query the minimum of these 3 dates. I know how to do a minimum value in a single field within a table, but don't know how to select a minimum from multiple values in multiple tables. Is this possible.:rolleyes:
