I have times that are converted using a hoursandminutes function.
Times range from HH:MM to D:HH:MM. But it has a problem correctly displaying times that might be 1:00 and 10:00. I want to criteria >"5:00"
Any reason why 10:00 would not show up in this criteria?
Any help greatly appreciated.
Hi,
Im trying to create a database for a stock control system. I have a slight problem, the stock is in two places. So what i have to do is put in the values of stock in each place and then display the value of those two added up in the table. What is the best way to be able to do this?
I'm trying to get my query to display only the minimum value within my query results. I have the following fields, CustomerID, OrderID, ProductID, WarehouseID, Freight Cost.
My current query will return results that show me the locations and freight cost of each product to my customers. My intention is for the query to only return records that has the lowest freight cost as there may be several warehouses with identical products but with varying freight costs due to location to customer.
I've tried to apply the MIN function on Freight Cost but it will only sort the records in ascending order instead of only displaying the record with lowest frieght cost.
Thanks in advance for your help.
As part of the report I'd like to have a table that would list all different values in column in column A and the number of times they appear in the table in column B.I have a bit of a hard time how to populate the table the easiest way.I have all the values in a separate source table, so first column is easier. but do i have to write the dcount statement for each row for second column?Could I display results of query as subquery in report.If you have a bunch of textboxes with increasing names like NameBox1... for for/next loops in reports... is there an easy way to assign those names?
View 9 Replies View RelatedHi,
I have a field in a form which displays the Sum of 10 values from other textboxes. I want to display the values of that calaculated field in a report and somehow I am stuck. I am running the report based on a query.
How would I get those field calculation values to display in a report?
Thanks
dfuas
Hi. I am using Expression Builder to total 3 columns for a query.
Total: [BaseTotal]+[ClickTotal]+[Adj Total]
The [Adj Total] is sometimes empty, and when this happens, Total is empty even though there are values for [BaseTotal] & [ClickTotal]. How can I make the Total show up regardless of whether any of the three items used to calculate it are Null?
Thanks
I have a form that functions as information display/update for a table. It also needs to display a list of relevant codes from another table. The codes in the second table have an ID that will match an ID field on the main table. However when I do this I either get every code in the code table, or nothing.
Here is the SQL that I'm trying to use:
SELECT table_code_lookup.code_text, table_codes.code_extra, table_codes.alum_id, table_codes.ID
FROM (table_code_lookup INNER JOIN table_codes ON table_code_lookup.code_id=table_codes.code_num) INNER JOIN table_alumni ON table_codes.alum_id=table_alumni.ID
WHERE (((table_codes.alum_id)=me.id));
However anything I can think of putting for me.id doesn't work. I've written a sub that will modify the query and insert the correct ID num, but I can't figure out how to get it to run when I change records with the record selector.
I have the nagging feeling that I'm missing something totally simple, but can't figure out what it is, where am I going wrong?
I am designing a book collection database where each book can contain multiple authors. I used three tables; tblBooks, tblAuthors, tblBookAuthorJOIN. The tblBookAuthorJOIN allows me to create a subform with drop down combo boxes in the Books form linking multiple authors to each books indexed field. The Author table contains the usual FirstName, LastName, MiddleName fields. I would to be able to display the names of each author in the forms header but I am having difficulty.
For example a book may have two authors such as:
Authors table would contain values such as
Last Name: Grisham
First Name: John
Last Name: Twain
First Name: Mark
Textbox in header would display: John Grisham; Mark Twain
The authors would be displayed in the following format in the same order as listed in the subform datasheet.
Attached is a graphic of the form.
I have a multiple column combo box on my form, that is correctly populating. When I make a selection, it displays the result from the first column. Bound column seems correct, as my table is being populated correctly.
1 - Can I display the values from both columns after the selection has been made?
2 - If not, can I choose to display the second column (not the first) after the user has made a selection?
I work at a program where we have individuals try out for a field (coming from various backgrounds). The program has been in place since 2012, and I wanted to start looking at the data for analysis and comparing trends, etc; I imported our master file (excel) into Access. It's in one big table, column headings include roster number, name, gender, type, FY (fiscal year), and finalcode (Select, Non-Select - but put it in as 1 or 2 in the field)).
I created a query, and was able to get data I was looking for.I then set it to Pivot Chart (bar graph).
Bottom (Believe its X) Axis: I have Type, Year.
Right Side of Chart (TypeCodeNumber)
Top of Chart: Count of CodeNumber
It gives me the totals (whether select or non-select) just fine, but I have been racking my brains, watched tons of YouTube videos and read a lot on how to make it give me a percent. I found a way to go Percent on the left side of the bar chart, but the Values go up to say 3300%. I know the problem is with the Count up top.
I have an issue with a couple of my combo boxes. When in form mode the drop down menu displays a list of options (taken from my source table), this is fine, but the problem is that it allows the user to select more than one of the options in the form of checkboxes. This is not what I intended.
I've attached to pictures to demonstrate the problem. The first is ComboBoxQuery (the one with the problem) and the second is ComboBoxQueryWorkign (the one without a problem).
I'm not sure why this is happening and I've tried comparing all the properties of both these combo boxes and changing some of them to see if I can eliminate the problem without any joy.
I use a very standard SELECT statement to pull the data for the combo box:
SELECT CountryID, CountryName FROM tblCountryInfo ORDER By CountryName
In a Query, how can I display in one column a value that can come from 2 different fields based on a selection.
Say I have two date fields (Date1 & Date2) they can both be blank, or one or both of them could have a real value. To make it simple here is the logic I want to employ.
If Date2 > " " display Date2, otherwise display Date1. I want the value to appear in the same column. Can this be done in a query or must it be done in a report?
Thanks!
I'm trying to determine the SQL to return only those records in a table which have duplicate values in each of two fields, but different values in a third field. Here's an example:
Code:
AcctNum FoodType FoodClass
------- -------- ---------
A123 Apple Fruit
A123 Apple Fruit
A123 Grape Fruit
A456 Potato Vegetable
A456 Potato Perishable
A789 Carrot Vegetable
A001 Banana Fruit
For the above table, I'm trying to return records which have multiple entries for AcctNum + FoodType, but DIFFERENT values for FoodClass. So for the above table, the query would return:
Code:
AcctNum FoodType FoodClass
------- -------- ---------
A456 Potato Vegetable
A456 Potato Perishable
It returns these two records because there is more than one record with for the AcctNum + FoodType (i.e. 'A456' + 'Potato'), but DIFFERENT values for FoodClass (i.e. one record has 'Vegetable' while the other has 'Perishable').
I have a field in a query that I would like to display differently than what is stored in the table. The field is call apt# and the output looks like this 0000000011409468Ø. I would like to display this data without showing Ø. Is there a way to do this? Thanks..
View 1 Replies View RelatedHi All
I have 28 records in my table - when I run the query (made by using the wizard) it only picks up 6 records.
I have no criteria in the query - just a straight query fulling all fields from the table.
Any suggestions?
I need to display the results of a query on screen when somebody clicks a button on the form. So I put code in the event of the click that looks like this:
Private Sub Command20_Click()
On Error GoTo Err_Command20_Click
Dim stDocName As String
stDocName = "HHC Report"
DoCmd.OpenQuery stDocName, acPreview
Exit_Command20_Click:
Exit Sub
Err_Command20_Click:
MsgBox Err.Description
Resume Exit_Command20_Click
End Sub
So far, so good, but my problem is that this query is one row with a lot of columns - that creates a lot of pages to look through. Is there a command that would loop it around on the same page, or rotate it clockwise so it's going down the page instead of across?
I am attempting to run a query with fields from 6 tables. These tables have been related, but just a simple ID to ID throughout all of the tables. When I select the fields I would like to be in query using the disign wizard it will allow me to create the query, however it will not display and data.
Originally, the query wizard would not allow me to insert all of the different tables fields in the query because "they were not related", so I went back and did the ID to ID relationships. Like I said this now allows me to create the query, but unfortunately no data appears.
Anyone have any suggestions please??
I am trying to make a query that includes 3 other queries. The primary key is customer number and I am trying to pull the sales for each customer by week, month, and quarter. If a customer has not purchased anything it does not display at all. Also, if they purchased something in the quarter or month but not in the past week it doesn't display. I would like the sales for the week, month, or quarter to display 0 if no transactions were made. It is not feasible to add a record for each customer with "0" since this would be updated daily.
View 5 Replies View RelatedIs there a simple formula to return the fiscal year quarter that applies to a date? I simply want January thru March to show as Qtr 1, etc.
thanks
In one table i Have component group Id and the description as fields then another table has the sub groupings for each Component Group Id
Example
Component Group ID = 1 which is the primary key
Description = Keyboards
Component
Sub datasheet has Group ID = 1 foreign key
Descriptive Options = USB, Wireless, PS2, Serial
I have joined both of these in a query but what i want is the query when i link it to the combo box on the form i have to only show the Group ID once and not repeat it for as many times as each subdatasheet has records.
Example: When i click External Device I dont want to see the word Keyboard being repeated 4 times (which is because there are four subrecords/types of keyboards) Please Advise.
Hi,
This is a Query / Forms question...
I have 2 tables setup with a 1 to many relationship, simialr to 1 Customer having 1 or more orders. I created a query to prompt for all orders for a particular customer. I then created a form based on this query - i.e. linked the query to a form.
Now when I open the form I am prompted for the customer id and when I enter this all of the results of the query are displayed in 1 form. However, this is not what I want. I would like the orders for the customer to be displayed within a subform on the actual form. In this way the customer details will static and I can cycle through the customer orders in the subform separately.
Is there any way I can setup my query to display the results in this way? I need the prompt for the customer ID. Or is there any way I can setup the form to display the results in the above way?
Any help would be greatly appreciated.
Thanks
Appreciate some help on a update query if possible. In this query I wish to total two sets of figures in about five seperate queries and then export them to another DB. the Dsum function is fine and will produce a result but that result needs to pick up the record ID (called PlanID) which is the primary key for the records being updated. I have struggled with this a bit as no matter what I did the PlanID field would not even display in the query results.
The section of code that is highlighted will now display an empty field and as such the rest of the query is blank. If I manually insert the PlanID figure into the record that the query is updating the other figures will appear.
How can I change this query to add the Planid to the update after it gets it from the customers form?
Thanks in advance.
UPDATE Customers INNER JOIN ExportBudgetTotalsTbl ON Customers.PlanID = ExportBudgetTotalsTbl.planid SET
ExportBudgetTotalsTbl.FoodHouseholdEx = DSum("[totalscash]","[budgetbase1qry]")+DSum("[totalcredit]","[budgetbase1qry]"),
ExportBudgetTotalsTbl.Lifestyle = DSum("[totalscash]","[budgetbase2qry]")+DSum("[totalcredit]","[budgetbase2qry]"),
ExportBudgetTotalsTbl.SavEmerg = DSum("[totalscash]","[budgetbase3qry]")+DSum("[totalcredit]","[budgetbase3qry]"),
ExportBudgetTotalsTbl.BillsFuel = DSum("[totalscash]","[budgetbase4qry]")+DSum("[totalcredit]","[budgetbase4qry]")+DSum
("[totalscash]","[budgetbase5qry]")+DSum("[totalcredit]","[budgetbase5qry]"), ExportBudgetTotalsTbl.Fixedpayments = DSum
("[totalscash]","[budgetbase6qry]")+DSum("[totalcredit]","[budgetbase6qry]"),
ExportBudgetTotalsTbl.planid =
[customers].[planid]
WHERE (((ExportBudgetTotalsTbl.planid)=[forms]![customers].[planid]));
I run a Query based on some data in a "drop-down" box. It works in just datasheet view, but when I print it on a report, it displays the position that the data is in the drop-down box.
How do I display the data, not the position on the report? Here's an example:
My drop down box contains:
apples
oranges
bananas
My query returns apples, but in the report view it displays the number "1" instead of my data "apples". If the query returned oranges, the report would display "2" instead of "oranges" and so on.
Any ideas?
Jen
I have created a Query to search for clients in my database, the query and the search all work fine, however it would be nice to have the query post the results into a form I have created to display clients data rather than posting the results in a tables view.
Is there anyway todo this?
Thanks in advance.
Here is my relationships and a copy of my SQL for this query. Why is it displaying the PK number (RaceClass) instead of the word.
My table for RaceClass has the number, the query has the number but my form has the word.
Many thanks for any help.
Tee.
Hi, I'm building a form where the user can choose various options to build up the query they want. It's going to be easier this way because the different combinations they might want would mean me writing well over 100 different queries. So I think I can build the sql statement in vb and then get a recordset back with the results, but the question is how to display it. I can't just assign the recordset to an existing form because the fields to be displayed will be different for different options. Ideally I'd like it to open just as if I had run:
DoCmd.OpenQuery <name of the query>
But it doesn't look like this is going to work for a query I've generated in the code, even if I use a querydef object (correct me if I'm wrong?). So does anyone know how I would go about doing this? (It would also be fine if the results appeared in a subform on the form I'm calling the query from, but I can't see how to do this either).
Any help gratefully appreciated.
Sim Bamford