Hi All
I want to create a query which is based on two fields.
One field is a date query i.e >=Date()-7 OR >=Date+7
The Other is a Combo box where the criteria is No
My problem is that access is currently running this as two individual queries.
Is it possible to make this query return data only when both fields are matching?
Or do I have to run this as a parameter query?
Thanks!!
Hi all,
I am endeavouring to filter a form based on the position of an individual.
I would like the users to be able to select their position and then any record where there is a match in the "Primary Responsibility" field or the "Secondary Responsibility " field will be displayed.
I have an underlying query that is populated by a combo box on an unbound form.
This has worked when generating reports for individuals but I cannot get the required result when using the form.
Thanking anyone in advance who can assist me with this.
Regards,
Rod
I have main form and that has one sub-form , this Main form governs/determines the data in the sub form.
This Sub form ( DataSheet Mode) has approximately 130 columns and based on the Main form criteria only ~ 20 columns has to be filled.
What I want to do is based on the main forms criteria I want to show only the columns that are applicable to main form criteria.
If I use Columnar or Tabular single form for the Sub Form I am able to hide the fields that are not required BUT IT LEAVES A SPACE/GAP on form ( for the hidden fields that are not required)
Private Sub Form_Load()
If Forms!frmShowPIforActiveAndCanAddNewPI!FrmSubFrmFi lterProductInformationPerFMT!CASETIF = True Then
Me.CASETIF.Visible = True
Else
Me.CASETIF.Visible = False
End If
End Sub
And If I use DataSheet and hide ( visible = no) a particular filed it still shows up in Sub Form
Is there a way to Auto-Re Arrange all the fields in the sub form so that the hidden ( visible = no) fields no not leave gap
Or is there a way by VBA program to select fields ( Columns) from a table to be displayed on a sub form based on a criteria
Thanks
Rahul
I have a query that is set up to join two name fields...for example:
[ELIGVENDORS.LSTNAM] & [ELIGVENDORS.FSTNAM]
The issue is that this is perfect for names that are entered in the table like this:
Lstnam: ABC HOSP Fstnam: ITAL
They are entered like that for groups, but when individual doctors are entered, the data entry folks are entering them like this:
Lstnam: SMITH Fstnam: BOB Titlcd: MD
So when I join them the first displays correctly as ABC HOSPITAL, the second displays as SMITHBOBMD and I have to manually go in and add a comma.
Is there a way to do an if/then statement or something to tell the query to display results If the titlecd is NOT NULL, display as [ELIGVENDORS.FSTNAM] & [ELIGVENDORS.LSTNAM]&", "&[ELIGVENDORS.TITLCD], else display as [ELIGVENDORS.LSTNAM] & [ELIGVENDORS.FSTNAM]
I'm sure there is, I am new to IF/THEN statments though and was hoping to get some help setting it up.
Thanks in advance and I hope my description is clear enough.
Han
I have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.
View 3 Replies View RelatedI have two tables linked by ID (Table1,Table2)
The Table1 holds data that is a request for a task.
ID, Request, Task_tms (the number of times the task is required to be done)
1, Make a cup of coffee,15
Table2 is my allocation of people to the tasks.
ID, Person, Task_done (the number of times this person has done the task)
1,Sally,10
1,Eddie,5
What I want to do is to limit the amounts of allocation in some way (ie in this case if I have already put 10 for Sally then I would be unable to put anymore than 5 when entering the amount for Eddie.
Additionally if I were to allocate all 15 to Sally then no additional people would be able to be allocated to this task (ID 1)
The two table are in datasheet format linked on a form.
I have a report which I would like to apply conditional formatting on multiple fields. I would like the conditional formatting to be based on two types of criteria
First criteria would be contracts that start with the year 2014. I used the following expression which worked - InStr(1,[ContractNr],"2014" AND [DirectorInCharge]= "Joseph Steinbok" or "Adam Godson")
To this expression I would also like to highlight fields which contracts start with 2014 AND have a particular Director assigned to it. For this I used the following expression - And [DirectorInCharge]="Name"
On their own, both expressions are working but I want to combine them. How do I do this? I've tried the following - InStr(1,[ContractNr],"2014" AND [DirectorInCharge]= "Name") but then nothing is highlighted. I also tried InStr(1,[ContractNr],"2014") AND [DirectorInCharge]= "Name" - in this instance EVERY record was highlighted.
I have a query that creates counts of fields based on the data in other fields, basically it tells me that in a table there are two entries with value ABC????? and three of DEF????? , the query works perfectly.
When I create a form to display this data and base the form on the Query I keep getting a message box asking for the ID (key field) from the base table.
If I type * in the box (to denote all values) and press enter I get the results expected.
I have table with filed with jobs that our IT’s have done for that day, the table is updated daily, based on my table I have created my query, I have set some criteria for some fields though, as follow:
Month = [Forms]![DailyWorkForm]![commonth]
Year = [Forms]![DailyWorkForm]![comyear]
ITName = [Forms]![DailyWorkForm]![comit]
Day = [Forms]![DailyWorkForm]![comday]
on my form I have commonth, comyear, comit, comday and a command button that will open a report based on the query which will be based on my 4 combo boxes on my form, ok I hope I didn’t make you all really confused, this is the question what if the user inputs on 2 combo only, meaning that if month = may and year = 2005 and left ITname and day empty, I still want the query to run, how can I do that?
Thanks a lot.
Maybe it's the day's 'brain drain', but I need to set a criteria in a query whereby it will select answers in a field that are a specific number of characters in length.
i.e., answers that are 5 digits long (without knowing any of the digits)
Russ
I have a database with the following information:
FTA # Date Attended Last name First name assigned person......
Each week I need to generate a report that shows the people that attended for that week, grouped by the assigned person. I only want to show the data for a specific "date attended" (i.e. that days date). I figured I first need to generate a query that only returns the data for that specific date in the "date attended" column. I did that but it is manuel by using the criteria field.
Is there an easy way to type in the date that I want the query to use as the criteria?
Thanks
:o
Below is the SQL I have on a Union Query. Each Query is
based on a date range. The first Query date is Planned
Immplementation Date. The second Query date is Revised
Planned Implementation Date. If the Date in the Revised
Planned Implementation Date is higher than the EndDateTxt
Date Range I do not want the results to appear for that
ECN. Any suggestions on how to accomplish this?
SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process]
FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID]
WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes"))
ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number]
UNION SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process]
FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID]
WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Revised Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes"))
ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number];
I have a table(Product Change) with these fields:
Tracking Number
Approved (a check box)
Engineering (text box that represents department)
Purchasing (text box that represents department)
Quality (text box that represents department)
Production (text box that represents department)
Customer Service (text box that represents department)
I want my query results to show all records that have the "Approved" check box...checked, and then only the records that have one of the Department fields with a null value.
So I'm looking to see only records that are "Approved" and out of those....only the records with at least one department field empty(Null).
Any help doing this is SQL view would be great...or even design view.
Hi all,
I have a query which populates a form called EditPatientFrm, which asks the user to enter the patient UniqueID in order to pull up the record they want to edit from the TblPatient. However, I want the user to now be able to input just one of three criteria in order to pull up the record to be edited:
UniqueID
ChartNumber
PatientLastName and PatientFirstName (two fields)
since they may not have the UniqueID readily available to them.
Can anyone show me how to do this? I have tried to find answer to this one under queries and forms- no avail. Sure it's a simple thing...
thanks!
vrpres
I sure am having difficulty with this. I'm trying to have the criteria in my form refer to a text box within one of my forms which is the text as I would write it myself within the query design view.
Query's [DEST_ZIP5] criteria = [Forms]![Mainswitchboard]![QueryWizard].[form]![calcDestZip5]
[calcDestZip5]'s value in QueryWizard form = "55422" OR "55343"
Basically, I just want to be able to enter the text string within a form instead of within the query. Sure this can be done!
Oh, and for what it's worth...
If, [calcDestZip5]'s value in QueryWizard form = "55422"
Then the query runs just fine. It's as if the query doesn't want to accept multiple criteria from another source.
TIA
What I want to do is set the criteria of a query to the value on a form if the form is open, and set it to a different value if the form is closed. I tried using a function on the OnLoad event of the form to set a variable called IsOpen to 1 if the form is open, and reset that variable to 0 when the form closes, but when I tried using the variable in an IIF statement in the query criteria, I got a "Its too complex" error.
Here's what I really want to do. I have a very complex form with multiple tabs and subforms. The subforms populate based on a query of what is selected and loaded into a textbox control on the first tab of the form. The first tab has a subform that is based on the main table. Rather than recreate that form, I want to copy it and change the rowsource on the first tab to a subset of the main table, and tell the query to use the textbox on the new form so I don't have to go and replicate all the other subforms. Is there a way to do that or am I just screwed?
On I form I have a combo box called cboMobileStatus.Its row source type is "Value List".The row source is: 1;" All";2;"Has";3;"None".I have a query based on table "tblCustomerContacts" and I want to limit the records returned based on the value of the combo box.So if the user selects:
* All (1) I want all records returned.
* Has (2) I only want records that have a mobile number returned
* None (3) I only want records that do not have a mobile number returned
The field mobile is text (to keep the leading 0)I thought of using the Switch function in the criteria of the query for field Mobile like this:
Code:
Switch([Forms]![frmPrintCustomer]![cboMobileStatus]=1,([tblCustomerContacts].[Mobile]) Like "*",[Forms]![frmPrintCustomer]![cboMobileStatus]=2,([tblCustomerContacts].[Mobile]) Is Not Null,[Forms]![frmPrintCustomer]![cboMobileStatus]=3,([tblCustomerContacts].[Mobile]) Is Null)
but the query does not like it!Am I on the right track, and if so, how should I modify the code?
I am having a problem pulling some data from a query to populate text boxes in a form
Text27 = DLookup("'SumOfSumOfDocCount'", "SumTotalPerf", "DateReceived=" & Forms.Tracker.Text23.Value & "AND 'BookedInID'=" & Forms.Tracker.BookedInID.Value)
I am trying to pull the sum of document count from the SumTotalPerf query where the datereceived in the query matches the date on the form and the BookedInID in the query matches the BookedInID on the form, at the moment Text27 just displays as blank with no error messages displayed so I am lost as to what im doing wrong, Ive double checked all the spelling for my column names etc and all is correct.
I have a form with a check box. A query is run that looks at that check box and decides what the criteria are based on that. So, if the check box is checked, it should pull in all data in the field that is a Y. If it is not checked, i want it to pull all data (Y's and N's and blanks).
here is my criteria:
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y","*")
This does not seem to work. I have also tried:
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y")
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y",Like "*")
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y","like "*"")
Hello all,
I have a temporary table with Yes/No fields (F101,F102,F103,....etc).
In another table i have a field called ProductCode with values (101,102,103,....etc)
Is it possible to append(or update) the records of the temp table with criteria on "F" &ProductCode field? (For example if ProductCode=101 then F101 sets to yes)
Thank you in advance.
Hello All,
I do hope somebody can help this newbie :)
Please except apologies if I sound a bit ignorant with this but I'm complete novice with Access...
Basically I have a table with the fields Name - Date - Location I need to extract info from the table based on the location field.
i.e. return Name if a specified location exists and another specified location does not. This was real pain in itself and in the end I had to run two seperate queries which returned NAmes where each of the chosen locations exist. I've then created an additional query which compares the two sub-queries and iliminates Names that appear in sub query 2.
I do hope this make's sense I'm starting to confuse myself.....
Anyway, my problem is with the date field... I have to specify a date in order to get the correct info as the results may change on a daily basis... i.e. somebody may use both locations one day, but just the one location the next. However the eventual report which I need to generate is based on criteria over the previous 7 days, although if I use this criteria in my query in completely messes up the results.
So, what I was hoping that I could do is somehow automate my query to run 7 times (once for each of the previous 7 days) and then to combine the results of the 7 queries into a single query or report...
Failing that, could anybody think of any simple way of achieving this... or will be a case of having settle for a seperate report for each day?
Any help would be hugely appreciated... once again apologies for the explaination... It porobably makes no sense at all.
Regards,
Andrew
I am working in MS access 2007.
What I am trying to do is fairly simple i just dont have the ability to correctly code what i want to do.
I want to filter my query based on some criteria in multiple columns. But i only want the query to filter based on the specific criteria if a checkbox has been selected.
Basically i want the criteria for one of the columns criteria to read
IF a check box "Check0" is selected THEN filter the column to only records that = 1 and if "Check2" then filter all records that = 2
I have a SubForm "assignments" based on a Query, which has criteria to filter dates and also to filter 0 and 1 of the checkbox ...
The question is:
How do I put in that SubForm one or more Checkbox to "enable" and "disable", only the criteria of such query? So, toggle, for example, those jobs that are not completed (Checkbox of the query=0) and those that do ...
Is there a way in access, through vba or any other means, which would allow me to either enable or disable criteria in a query based on the value of textbox??
Like i have a query that displays bookings customer has made between two dates, so i made a query and in the starting and ending date fields i get the value from form. In case if the use does not enter ending date, i would like to run the query with starting date only that displays booking made after the starting date.
Currently the starting date criteria is set to a textbox of form, and so is ending date. So if customer selects 1st April 2015 as starting date and 30th April 2015 as ending date the query should display the bookings between 1st and 30th of April. And if the user enters only 1st April in starting date it should display bookings starting from 1st April onward.
I have a SubForm "assignments" based on a Query, which has criteria to filter dates and also to filter 0 and 1 of the checkbox ...
The question is:
How do I put in that SubForm one or more Checkbox to "enable" and "disable", only the criteria of such query? So, toggle, for example, those jobs that are not completed (Checkbox of the query=0) and those that do ...
Ok so im working in MS Access 2007.
I want to create a query based on 3 combo boxes but have it so that if the field in the second or third combo box is not populated the query still runs.
Right now i have the Criteria set for the three columns that i wish to sort by as seen below.
Column 1
Criteria: [Forms]![Entity Selection Form]![areabox2]
Column 2
Criteria: [Forms]![Entity Selection Form]![devbox2]
Column 3
Criteria: [Forms]![Entity Selection Form]![entitybox2]
This gives me the correct query result but im forced to make a selection from each combo box. Is there a way to progamme it so that if I only make a selection from the first combobox and leave the others blank i can still get results in a query?