I have a query with a calculated field as follows: Age: (Now()-[DOB])/365
Even though I have set the property sheet to '0' decimal places, the results are showing about nine decimal places. Is there a way I can get it to just show the age in years without all the decimal places? I'm pretty new to DB and have seen a couple of postings, but couldn't understand how to apply them to this simple situation.
Many thanks
Mohani
I'm trying to get this query to work:
Code:
SELECT Avg(Round([Final 205].[LastOfSumOfRehLOS],2)) AS AvgInpLOS, Avg(Round([LastOfSumOfWaitLOS],1)) AS AvgWaitTime, Count([Final 205].PHN) AS Observations, [Final 205].LastOfIntensity AS Intensity_Level
FROM [Final 205]
GROUP BY [Final 205].LastOfIntensity;
It doesn't found the result to two decimal places.
Anyone knows if I can predefine decimal places in a query statement? For example, when I run the select query below, I want the MedicalPremAmt to have two digits after the "." It should look something like this: 12.38
Thank you.
SQL = "Select [Barg Unit], First([Medical Option]) As Carrier, First([Medical Coverage Tier]) As Tier, Sum([Medical Premium Amount]) As MedicalPremAmt,Sum([Total Grant]) As TotalGrant,Sum([Health Allocation]) As HealthAllocation,sum([Medicare Allocation]) As MedicareAllocation FROM RetireeCensus Group By [" & Category & "];"
Hi there,
I am not sure the best way to do this,
I have a field with values that look like: 1.69553366385509 or 0.0061705541157596
I want these values to look like: 1.6955 or 0.0062 (4 decimal places [rounded up if possible])
Thanks for your help with this
Sue
I have Access 2000. I want to update all my records in one table so that they only have 2 decimal places instead of the 10 they have now. What is the expression used to do this?
Thanks
Chad
I am using an inventory software program called ERP. I am trying to have at least 8 decimal places show in all my reports/tables/etc. I have set decimal places to 8 and 8 are showing up in some the reports BUT after the 4th decimal place, the other 4 decimals default to 0 (i.e. I put .19214, but only
.19210000 shows up). In other tables only 4 decimal places are showing up (no 0 or anything after the 4th decimal place. I would greatly appreciate any help!!!
THANK YOU!!!!!!
LL
I have search the forum and cannot find an answer, can anyone please help. I have a few field in my table that have number and I would like to be able to enter decimal place numbers like 8.25.
I have set:
Field Size = 'Long Integer'
Format = 'General Number'
Decimal Places = '2'
When I go to enter a number it rounds to the whole so when I enter 8.25 it inputs 8.
Any ideas? I need the decimal to show in the query and the form and it isn't showing in any of those. I have set the query to 2 decimal places and form to 2 decimal places.
Thank you very much!
Adam
Hi all,
I want to but numbers with 2 decimal places in a field. I have the data type set to number in the desired field - yet when I copied and pasted the data over, all the numbers that had 2 decimal places lost them. The only number visible was the whole number. How can I make the numbers reatain their 2 decimal places?
Elliot
I have values (using a make-table query) in an Currency field like £123.45.
Using an update query, I want to make these values become £123. What function, or otherwise, can I use to get this?
I have used a combination of the Round and CInt functions to do this but all I get is £123.00 not £123. I know I can change the DecimalPlaces table property to 0 to get what I want, but I am running code to do all this, hence I need an update query that will resolve the issue if possible.
I would like the users to enter values of day 2.5 however it always rounds up to 3 i have checked the propeties of the field in the table and i have set it to 2 decimal places. I have also checked the property of the field on the form and done the same. There must be something i am missing.
Thanks for lookin gand your help.
I have a query with a calculated field Qty=([tons]*[%AC]) that I need to round to three decimal places before making next calculation of total dollars ([unit price]* [Qty]). I know I can display the three decimal places by using format - Standard and decimal places 3 but it still calculates with all the decimal places of the original calcuated quantity and when the report prints showing the extended dollar amount is not what it appears it should be Qty may display18.019 but is actually calculating on 18.018737864077. I have searched this forum and access help but have not found anything to correct this problem. Any suggestions.
View 6 Replies View RelatedI am making a query in which one of the fields I want to display is a Calculated field. It is just two other fields divided. I want to display this calculated field with 0 decimal places, but when I view the properties, there is no decimal places box. There is everything else like the description, format, input mask and so on. Any ideas?
View 2 Replies View RelatedHi, I have a column in my table that I have set as a number. I have also set decimal places to 2 but when I type in 0.75 and move to the next entry, it changes the 0.75 to a 1! How do I make it not do that? Many thanks
View 1 Replies View RelatedHi,
I'm having a realllllly frustrating problem. I'm trying to enter the number 101.1 in a field, but whenever I enter it and hit tab to move to the next field it just truncates the number to 101. I've changed the number type, the number of decimal places, ect - everything! But it still changes my 101.1 to 101 after I move to the next field.
Help muchly appreciated.
I have this code:
MaxCPC = Bid2 / 7
But I want MaxCPC to be stored to 2 decimal places. If I click in the field, quite often I get something like 2.3256 but I only want 2.32.
How?
Hi everyone,
I have a field in a table holding numbers with no more than 2 decimal places eg. 96.87
Field Size = 'Double'
Decimal Places = 'Auto'
The data appears fine in Access and when exported to Excel.
However, when I merge the data into a Word document the numbers have loads of decimal places, so 96.87 becomes 96.87777777777777777777
What can I do!!??
Thanks
I have a database that requires a particular field to have varying decimal places (1 or 2) based on a value in another field. This data will be used in calculations and exported to Excel for graphing so the text format is not an option. Is there a way to set this up in the table or have it format properly in a report?
View 1 Replies View RelatedI would like to force a field to be 2 decimal places in the SQL view of a query as I am creating a UNION.
If is there anyway of doing this? I have tried CONVERT() & FORMAT() but I can't seem to get this to work.
Any help would be greatfully received.
Kind Regards
Carly
I have the following code to calculate output per hour. It works but how can I limit the result to two decimal places.
Private Sub Hours_AfterUpdate()
Me.lbloutputph.Caption = Me.Qty / Me.Hours
End Sub
Thanks
I'm having a problem exporting my table as text and having three fields reporting only 2 decimal places instead of the 4 that i need.
I'm using Access 200 on Windows XP Pro.
I searched the forums and the only thing i could find was to create a querry and using ColumnName: str([dblNumber]) somehow. I don't really unerstand what they were trying to do except that somehow this converts the number to a string. This would work I guess, but I couldn't get it to work.
I have also read somehting about changing the fields in the MSysIMEXColumns table somehow to allow more decimal places in the exprted text file.
Thanks for helping.
Will
Hi,
I am trying to multiply £127.65 by 1.175 to produce and store the answer £149.99 in my “answer” field.
I have spent more than a few hours testing different methods, but none so far seem to be suitable.
I used to use the currency data type, however - although the field would show £149.99 – it is stored as £149.98875. So when it comes to adding up each of the “answers”, I am sometimes a penny out because it is adding up the stored number and not the two decimal place answer.
I then changed the data type to “number”, set format to currency, and set the scale and decimal place settings to 2. However this is now not rounding the numbers up correctly and the answer produced is £149.98.
Is there a way I can round up the numbers, and store them as £149.99?
Any help would be greatly appreciated.
Thank you for your time.
Dean
Hey everyone! Hopefully, someone can help me with this. I've searched the forum and can't find anything on it.
I want to take a number and reduce the number of decimal places from 4 to 3 WITHOUT rounding it. Just chop off that 4th number...I don't care about it.
Examples:
243.4586 = 243.458
22.0541 = 22.054
5.8577 = 5.857
1,587.2556 = 1,587.255
Seeing as how the numbers can be in the 10's, 100's, and 1000's, I can't just use the LEFT function. :D That, of course, would be too easy.
Suggestions? Solutions?
Thanks in advance!
Hi Guys,
How do I create a number field in my table that can store numbers with 2DP?
I have set the format to both Standard and Fixed before, AND specifed 2DP in the drop-down box. But whenever I go to enter in a value, Access just rounds off the decimal place!
Problem: I want to "round" (to 2 decimal places) numbers 1-5 down and 6-9 up. For example:
1.915 = 1.91
1.916 = 1.92
I know this is completely screwy but I have to match numbers up to a purchasing system that seems to be doing just that.
I've researched rounding in Access a lot and I understand Bankers rounding (that won't work), I understand Int() and Fix() both don't do what I need. I've something about rounding half down (which is what I think I need) or Floor which I don't quite understand.
I have a database that has raw data input to 2 decimal places. There are multiple queries set up to sum the total cost by facility and box type. When the queries are run, the output is to 4 decimal places. I need to round the cost to 2 decimal places. (Right now, it is formatted to show 2 decimal places, but when you click on the number, there can be up to 4 numbers after the decimal.
I have tried to round the numbers within the queries and I get errors asking for parameters. I've also tried to round the numbers in the append queries where I move the final numbers to a summary table. When I do that, I get an error message that the database can't find the table I selected.
I'm not sure how or where it's best to add the rounding function so that my final output is in the format I need.
I am new to databases. I have set up a simple database but when I enter say 14.75 as a number the database converts it to 15.00. I am not aware of having set any rounding conditions.
View 2 Replies View Related