In my BookingTable I have a StartDate (Format: "dd/mm/yyyy"). For every start date there is a CostOfBooking field also in the query. I want to show a list of all the current StartDates that occur in this month of this year and the cost of that booking. How can this be done?
View RepliesI have a date and time stamp in a Date/Time field of General Date format (3/1/2006 7:52:25 AM).
I wish to select query on the table's Date/Time field by date portion only (3/1/2006) and not include the time portion (7:52:25 AM) of the field.
Using this expression in the query's criteria - "Between [Enter Start Date: (MM/DD/YY Format)] And [End Date: (MM/DD/YY]" will not return the date ranges as desired without also typing in the full time string.
How can the date integer be parsed out and the query properly expression ed on the criteria field without using VB?
I have the following query
SELECT * FROM Orders WHERE OrderDate Between #4-9-2006# And #4-10-2006#
I expect rows with OrderDate = 5-9-2006 to be returned, however they are not.
Apparently the date formats are interpretted as mm-dd-yyyy instead of dd-mm-yyyy.
Can I set the default date format or is there another solution?
Hi,
I have a query in which I am pulling from another table. On the table I have a field called Tag, which consists of data in the form of a combo date/place. Ex) 29OCT7NY date = 10/29/2007; place = NY
When I call on the Tag field in my query, I only want the date portion. So, I used the Left function... Left([Tag],6). But I also want to format the date portion so it is always in the form 10/29/2007 in my query. I tried Format(Left([Tag],6), mm/dd/yyyy) but it did not work. I think it has something to do with the weird form of the Tag field "ddmmmy".
If anyone could help, it would be much appreciated.
Thanks!!
I have set the Left([DSERDBA_RECEIPTS].[RCTH_RECEIPT_NO],8) AS [DISTRIBUTION DT] field property to Short Date, 99/99/0000;0;_ . When I run the query I get that field formated as a short date, but when I try to create a table from the same query the data returned is no longer in the date format. Is there something I can do to have the make table results look like what I get when I just run the query without creating a table?
SELECT
DSERDBA_RECEIPTS.RCTH_ID_CASE AS [CASE],
DSERDBA_RECEIPTS.RCTH_DT_RECEIPT AS [DT RCTH],
Left([DSERDBA_RECEIPTS].[RCTH_RECEIPT_NO],8) AS [DISTRIBUTION DT], DSERDBA_DISBURSEMENTS.DSB_DT_DISBURSE INTO [TABLE 1]
FROM [UNIVERSE OF CASES] INNER JOIN (DSERDBA_RECEIPTS INNER JOIN DSERDBA_DISBURSEMENTS ON DSERDBA_RECEIPTS.RCTH_RECEIPT_NO = DSERDBA_DISBURSEMENTS.DSB_RECEIPT_NO) ON [UNIVERSE OF CASES].STAT_CASE_ID = DSERDBA_RECEIPTS.RCTH_ID_CASE
WHERE (((DSERDBA_RECEIPTS.RCTH_ID_CASE)="20028570P"));
I am trying to create a crosstab query that counts the number of events that have been logged for each day of the month. The event date is stored in an ODBC compliant database in date/time format. Unfortunately, the crosstab query counts the number of events for each date/time occurrence.
I have tried entering the following expression in the Field: definition with no success (no records are returned when the query finishes executing):
Expr1:Format([OPEN_TIME]),"mm/dd/yyyy")
I am stumped! Any help would be appreciated.
Thanks,
John
I would like to delete records using a sql statement and comparing dates.
The dates will be current date and creation date.
Creation date will be imported into the table from another database. Obviously the current date will be rendered by the system.
I would like to delete all records that have a created date less than 30 days old.
Any thoughts.
I am writing code in excel VbA that will fetch data from Access table.
04/03/2015 means 4th March 2015 so if I write the sql query as below then it doesn't pull anything from access table.
Code:
strsql = "SELECT DISTINCT printpoolno FROM tblmaster where username='" & Application.UserName & "' AND Date1=#" & Format("04/03/2015", "mm/dd/yyyy") & "#"
MsgBox strsql
What shall I do?
I wanted to assign the field "Number of magazine" with special format based on date/time format but showing only year and month in the format: "yyyy-mm".
So in property of this field in format I put yyyy-mm and in input mask I type 0000-00;;-
I also created the form based on the table containing above field and I defined format and input mask for corresponding formant in the same way like at the table.
But if I try to type date for example 2014-01 in text box of the form it comes up with the full date 2014-01-01. Why does it do like this? What do I do incorrectly?
I'm creating a query with VBA, then exporting it to Excel. I have a couple calculated date fields that are exporting in the format of dd-mmm-yy, but I want them in the mm/dd/yyyy format. In the query, they're in the proper format, but not in the export. I tried using Format([DateField],"mm/dd/yyyy"), but then they left align in the export, but are fine in the query.
View 1 Replies View RelatedI have unified three queries , each query has a field "date",
format is dd/mm/yyyy.
The Union select query however, displays this "date" with different format , dd/mmm/yy
How can I fetch same format in the union query ??
I am having difficulties changing a date/time field like '22/04/2013 09:14' to make it look like '2013-04-22 09:14' using a query.
View 3 Replies View RelatedI have a list of dates in the mm/dd/yyyy format and I am looking to get it into the fiscal format of yyyyww. I am able to do this with the datepart and format functions, but I need to make it so that the fiscal month begins in January but the first week starts if there are three or more days in the week. For instance if Jan 1st is a Friday then this stands as the first fiscal week, if it is a Saturday then it does not count as the first week.
datepart and format functions have the Use the first week in the year that has at least 4 days for the firstweekofyear option but I need it where it has at least three to make it work.
I am importing data that has been put onto Notepad into an Access table - this works fine except the date in notepad comes across as a date and a time. When I put the table into a query and ask for the date to be Between [Specify date 1] and [Specify date 2] - does the user have to then put 7/02/2005 00:00:00 AM and xxx. I have tried this but it doesn't return all values. I have also tried just the dates but this doesn't return all values either - any ideas?
View 6 Replies View RelatedUsing access 2010; i have a form that includes a date field. Is there a way to force the user to only choose a month end date? When the user clicks the date from the popup, they may use 9/1/2013 when the mgr. want them to use only 8/31/2013. I am thinking validation field to put a msg but want to be able to force it not the option.
View 2 Replies View RelatedOn my report, I want rows with expired dates to stand out by having their borders thicker. Something like:
Code:
If Me.txtDate < Date() Then
Me.txtDate.BorderWidth = 6
End If
When I do that, it ends up formatting every txtDate field in the report if one of them passes the If criteria instead of only ones that are expired.
The date format from one of my access tables is as follows:
11051977
9101978
and I need to amend to following formats within my select query:
11/05/1977
09/10/1978
I have tried using formula:
Date of Birth: DateValue(Mid([DOB],7,2) & "/" & Mid([DOB],5,2) & "/" & Mid([DOB],1,4))
that results in an #Error messages
Can anyone help?
Thanks
Hello
Can someone help format the date correctly? I'm currently linking a flat file in access and then creating a table afterwards. The date comes in the following format below:
i.e. 30102006 - txt type
I wanted the date to look like - mm/dd/yy. Thanks for the help.
I have a date field in my table and my computer date is set as a custom long date, if I enter 24/2/07 in my date field when I press enter and move to the next field it is displayed as Saturday 24 February 2007 but when I select the date field again it reverts back to 24/2/07. I include the date field in a merge with a word document and would like the date displayed as Saturday 24 February 2007, but the merge is displayed as 24/2/07. Can anyone help with how to merge the date as Saturday 24 February 2007?
View 4 Replies View RelatedHello,
I have two pc's, both with Windows XP SP2 and Office 2003 SP2 (dutch) and the same input locales. I made a program in Access (connected to a MS SQL Server) where dates are stored. Now I want to built a report with a daterange. Because of the dateformat in SQL I made a function to convert the date because they enter it in Dutch format. The function is:
Function DatumSQL(datDatum As Date) As String
DatumSQL = "#" & Format(datDatum, "mm") & "-" & Format(datDatum, "dd") & "-" & Format(datDatum, "yyyy") & "#"
End Function
This works great on computer 1. But not on computer 2. On the second computer the date is converted again. When I don't use the function it works fine on computer 2 but not anymore on computer 1.
I searched for differences and found that on computer 1 the files in the map C:Program FilesCommon filesSystemado are from 3-8-2004 and on computer 2 they are from 2-3-2006.
How can this happen? And what is the solution?
I hope someone can help me.
Thanks in advance.
Benno
I have a date field with a format of 'Short - dd/mm/yyyy'. All of the data stored in that field is in that format.
I have a listbox that displays all those dates. I select a date, then click on a button to filter the form by the date selected. Here is my code that fires on the cmd_Click event:
Forms!frmPondSampling.Filter = "RPID = " & Me.cboPondID & " AND Date = #" & Me.lstDate & "#"
Forms!frmPondSampling.FilterOn = True
This works for dates where the dd is more than 12, but it wo't work when the dd is less than 12. I'm assuming it is getting the dd and mm mixed up, but all my data is correct and matches the field type.
I am trying to find a date format and superised that MS doean't offer this feature. The format I am trying to set setup is this: 01/01/2006. Right now, all I can do is to set it up by the befault setting of 1/1/2006 and is not what I am looking for. Is there a way that this format can be modified?
View 11 Replies View RelatedI am trying to run a query that someone already established/saved. It asks for beginning date and end date. I have tried a few different formats but I cannot get the query to run. I have tried the date as 1998,01,01 for beginning and 2006,03,14 for end. i have tried also 01-01-98 and 01-01-1998 etc. I keep getting the same error that the date is too complex or something. Can anyone help me?
View 7 Replies View RelatedUsing MS Access I have the following SQL for a selection query:
SELECT qryOfferteAfdruk.pkOfferte, qryOfferteAfdruk.Nummer, qryOfferteAfdruk.Datum, qryOfferteAfdruk.Bedrijfsnaam FROM qryOfferteAfdruk WHERE [qryOfferteAfdruk.Datum] Between #08-01-2008# And #12-01-2008# ORDER BY qryOfferteAfdruk.pkOfferte DESC
The problem is that the 'between' dates should have dd-mm-yyyy format, but once the query is executed the format is mm-dd-yyyy. I do not understand why, because in the control panel of Windows I selected dd-mm-yyyy and in MS Access I selected the standard date format, being dd-mm-yyyy.:confused:
Hello,
This is problably a very simple question; however, I can't find the way to do it.
I have a field in a form that its default value is today's date: Default value: Date().
As you know, it always appears as dd/mm/yyyy. Is there a way to change it and instead to appear as mm/dd/yyyy ? I am sending this field to some reports and an error is appearing as in the database dates are stored as mm/dd/yyyy
Thank you!
I using a auto date in a table and want it to display differently in a form.
How do i do it?