Query Looks Complicated
Mar 20, 2007
Hi
I am trying to query and summarise the contents of a table. I am unable to reach the results that I want. The table contains the following data:
AuditNo AuditTeam TypeOfTeam pName pAddress
234 CENTRAL SPEC TRUE FALSE
235 CENTRAL SPEC TRUE FALSE
236 WEST FSTL FALSE TRUE
237 EAST JUPT TRUE FALSE
238 EAST JUPT TRUE TRUE
I will like the results of the query to look something like this:
AuditTeam TypeOfTeam pName pAddress
TRUE FALSE TRUE FALSE
CENTRAL SPEC 2 0 0 2
WEST FSTL 0 1 1 0
EAST JUPT 2 0 1 1
In the results the columns pName and pAddress have subheaders of TRUE and FALSE. If this presents more problems then perhaps the subheaders can be removed and instead we will have pNameTrue and pNameFalse. Note there are 116 columns similar to pName and pAddress in the original table.
I don't know whether this is possible. It may require several queries to get to this. I am really stuck with this one so any tips will be very welcomed.
thanks.
View Replies
ADVERTISEMENT
Aug 4, 2005
I have a query that calculates the 'amount of credit' depending on the draw down date (which is when they started circulating the loan docs b/w two parties). Anyways,, the question is how can I make two columns of 'amount of credit' instead of one. Because one of the team member is dealing with overseas loan, while others are working on domestic. I want to make a column that would seperate his works from other people's work. And, I am kind of confused, how will I do it on a report. I have tried cross-tab query and also simple. Nothing is working.
One column should carry the amount he has to give as a loan and the other should calculate the amount from domestic side.
I don't want to use list box as it is unprofessional and also, its looking bad. If I create two queries, how can I join them together. I tried that too, but didn't work.
I need help badly :(
TIA
View 12 Replies
View Related
Sep 27, 2006
This is a little complicated so I am not sure t can be done!!!
I have a query that lists 40,000 records with some being sent to label printing
The query breaks the records down so that any record with a Qty greater then 17 will be sent to a second query for a different label to be attached.
I then end up with two Queries
Query 1 is =<17
Query 2 is >17
Records less then or equal to 17 are sent for standard label printing.
Here is my problem:
Any record with a Qty field reading less the 3 or 4 I want them to print 3 or 4 of the same label. For example
Jane doe (Qty 6) this will print 1 Jane Doe label
Joe Bloggs (Qty 3) this will print 3 Joe Bloggs labels
Am I trying to do something that just can’t be done!
When this is complete all information will be exported to a CSV file.
View 2 Replies
View Related
Nov 15, 2006
I want to build a form based on a query, but I don't seem to be structuring it properly. Please refer to attached picture to help explain what I'm trying to do. I have 4 essential fields in a table, tblInpatientLog. They are POSno, Primary, POS Code, and Length of Stay (calculated as difference between Admit Date and Discharge Date).
What I need to do is have the form display the POSno that are in the table as "21" and "61" ONLY. There are others, but I only need to see these two. I then need to split the form (visually) into two sections. On the right, I need to display the Primary field as ones that are in the table as "Healthy Plan" only and on the left, I need to display Primary as ones that are in the table as "Medicare" only.
Under these headings, I need to show the total number of days, under the Length of Stay field for each of the four hospitals, Hospital 1, Hospital 2, Hospital 3 and Hospital 4, which are identified in the table under the "POS Code" field as "16", "2", "5", and any number OTHER THAN 16, 2, or 5 (or, whatever is left), respectively.
The Length of Stay field is calculated as difference between Admit Date and Discharge Date fields in the form for each individual record. I need access to show me a SUM of all the number of days for all the records that are listed as "Healthy Plan" for the "Primary" field for Hospital 1, then for Hospital 2, then for Hospital 3 and then for Hospital 4.
Then I need Access to calculate the SUM of all the 4 calculate field results for the 4 hospitals and display in the "Total Hospital Days" field on the form. Finally, I need a count of the total number of records that meet the criteria of "POSno" = 21 and 61, "Primary" = Healthy Plan, "POS Code" = all.
I hope that makes some sort of sense for someone. I've tried to create a query, but it doesn't display any results. I've wondered if I need to create more than one query, and have tried various different options without success. Any alternate suggestions would be welcome at this point. Thanks in advance for anyone out there that might be able to help.
View 14 Replies
View Related
Oct 5, 2005
I'm totally new to access so please bare with me, what I want to do is create a query that takes the price from one column and takes 25% off it if there is 2 units in stock, 30% off if there is 3 units, 40% if there is 4 units in stock and 50% if ther is more than 5 units in stock, the results will then be created in a column called DiscountPrice and the percentage off will will be created in a column called SaleInfo. Is this possible?
View 1 Replies
View Related
Apr 5, 2006
Hi there - I've looked at quite a few posts and although some of them seem to start of heading in the right direction there doesn't appear to be anything that quite hits the spot for what I'm looking for.
I'm trying to create a query that creates the following (see spreadsheet as typing it out didn't help.)
I hope that's clear - any help appreciated.
Cheers,
Mark
View 1 Replies
View Related
Sep 26, 2006
First off let me say that I'm VERY new to Access. I've been put in charge of administering a large (to me) database and I've just started working with the insides of the database for about 3 weeks now.
The most urgent thing though is I need to make an "Honour Roll" report for the employees, that is, they get pass/fail inspections and I'm trying to create a query that returns all employees that have 10 or more passes IN A ROW, with at least 2 of those passes being a personal evaluation vs. an after the fact quality verification. There's already a query in the database that returns the employee ID, total passes, total fails. I've managed to add the field that includes type of inspection, but I can't seem to find a way to count the number of PE's in the field.
The second issue is getting the query to ignore all inspections prior to their last fail. I think I can work out moving the date of the inspection into the query, but then using it is another story. If it requires a script of some sort, then I'm hopelessly lost. The last programming I did was BASIC back in school... many years ago.
If I were to break it down into a statement, it would be something like this:
If (employee passes) >= 10 since last (employee fail) AND (inspection type="PE") >=2, then send (employee ID) and info to a report.
Any help with this is appreciated, I'm starting to get desperate!
View 2 Replies
View Related
Apr 5, 2007
I have 3 tables that i wish to pull information from:-
TBLProspects
LeadID (Primary Key)
CompanyName
RenewalDate
Status
TBLNotes
NoteDate
Note
Who
LeadID
TBLQuotes
QuotePremium
Income
Reason
OnCoverPremium
LeadID
I have created the query and at the moment, I am getting duplicated rows of "Note" because there are more than one "QuotePremium" for each CompanyName. Is there anyway of showing the CompanyName, the Note (just once) and then the 2 or 3 QuotePremiums records?
SELECT DISTINCT TBLNotes.NoteDate, TBLProspects.CompanyName, TBLProspects.RenewalDate, TBLNotes.Note, TBLProspects.Status, TBLQuotes.QuotePremium, TBLQuotes.Income, TBLQuotes.Reason, TBLQuotes.OnCoverPrem
FROM (TBLProspects INNER JOIN TBLNotes ON TBLProspects.LeadID = TBLNotes.LeadID) INNER JOIN TBLQuotes ON TBLProspects.LeadID = TBLQuotes.LeadID;
View 2 Replies
View Related
Jan 3, 2008
Hello all!
I find it difficult to build a query...
The scenerario is the following:
I have a table that keeps information for weeks about some files (e.g: if the file has been sent). Then I have another table with information for days in a month (the data for every day).
What I should do is:
Check wheter the week has been sent, if it has been sent, I have to show the data for every day of that week in a report. Only for one month... and I can't figure out how to build that query...
I guess I should do something like:
select week from weekTable where week=week and sent=TRUE
set rcset=db.openrecordset(sql)
if(not rcset.eof)then
'build in here the query to select the data I need from the month table
end if
but i can't figure out how the loop would be for 1 month...
Any help will be much appreciated!
View 2 Replies
View Related
Jul 25, 2005
Well Super Complicated to me. I have setup two queries as follows,
Query 1
The function of the query is basically as follows.
1. If Field 1 is blank do nothing.
2. If Field 2 is blank then Add 7 days to Field 2.
3. If this falls over a weekend then Add another two days.
The expression I have added to do this is,
IIf(IsNull([Field1]),"", IIf(IsNull([Field2]),DateAdd("d",DateDiff("ww",[Field1],DateAdd("d",7,[Field1]),7)*2,DateAdd("d",7,[Field1]))))
Query 2
This query check whether the result of query 1 is a Weekend and if so adds another two days to it,
IIf(Weekday([Field2]= 1 Or Weekday([Field2])=7,DateAdd("d",2,[Field2]),[Field2])
My biggest problem is if I try and do any filters on this information then I get "Expression to complex" errors.
Am I over complicating things here?
Any ideas would be greatly appreciated.
JC3
View 1 Replies
View Related
Apr 17, 2014
Some essential background first. I have a Balances table which records balances by date. I also have an Issues table where problems are logged. There is a one-to-many relationship between Balances and Issues (i.e. each Balance can have multiple Issues). I also have a Comments table where updates for each Issue are recorded. There is again a one-to-many relationship between Issues and Comments (i.e. each Issue can have multiple Comments)
There are two key date fields in the Issues table :FlagDate (the date an Issue was flagged by a user for investigation)
ResolveDate (the date said investigation was brought to a conclusion)
There is also a date field in the Comments table :UpdatedWhen (the date any given comment was added)
So the basic flow is that an Issue gets flagged (FlagDate), then various comments are added (multiple UpdatedWhen's) and finally the Issue gets resolved (ResolveDate)
I need to incorporate a trend graph which will show the counts ofNew (i.e. new issues flagged as of each day) Cleared (i.e. issues resolved each day)
Updated (i.e. issues not yet resolved but updated each day)
Unchanged (i.e. issues not yet resolved and not updated each day)
Outstanding (i.e. all unresolved issues as of each day)
This is the SQL I've put together to get that table of information on which to base my chart :
Code:
SELECT [tblBalances].[BalanceDate] AS AsOfDate,
(SELECT COUNT([tblIssues].[IssueID])
FROM [tblIssues]
WHERE [tblIssues].[Flag] = True
AND [tblIssues].[FlagDate] = [tblBalances].[BalanceDate]) AS New,
[Code] .....
The subqueries for 'New', 'Cleared' and 'Outstanding' work perfectly; the resultant dataset gives me one record for each date in the Balance table and correctly counts the number of issues falling into each of those buckets.
The problem I have is with the 'Updated' bucket. If a flagged issue happens to be updated twice on the same day (which is perfectly acceptable), it counts this twice as well. I don't want this as I just want to know how many issues were updated on any given day - not how many updates there were.
I tried using COUNT(DISTINCT) in the 'Updated' subquery but it gives me a syntax error - on further research, I don't think it's possible to use the DISTINCT keyword in a COUNT subquery (at least not easily)
I also tried grouping by IssueID within that 'Updated' subquery but it still gives me the duplicate count within the same IssueID (and returns nulls rather than zeroes for those days where no updates occured)
I think I need to add a subquery within the subquery () to only return the latest comment as of the date in question - something along the lines of :
Code:
(SELECT TOP 1 [tblComments].[UpdatedWhen]
FROM [tblComments]
WHERE [tblComments].[IssueID] = [tblIssues].[IssueID]
AND DateValue([tblComments].[UpdatedWhen]) <= [tblBalances].[BalanceDate]
ORDER BY [tblComments].[UpdatedWhen] DESC) AS UpdatedWhen
But how to do this, nor if it is even feasible in Access to begin with.
View 2 Replies
View Related
Jul 19, 2006
Hi gurusI'm looking for query to extract records from one table linked to another table based on different ranges. Now here goes.SELECT Invoice.dbInvoiceNum, Invoice.dbInvoiceDate, Invoice.dbFirstName+' '+Invoice.dbFamilyName) AS dbPatient, Invoice.dbdob, Invoice.dbServiceProvider, InvoiceItem.dbItemNum, Invoice.dbPayerName, Invoice.dbTotal, Invoice.dbTotal-Invoice.dbBalance AS dbPaid, InvoiceItem.dbServiceTax, TransactionLog.dbTransCodeFROM ((Invoice INNER JOIN InvoiceItem ON Invoice.dbInvoiceId = InvoiceItem.dbInvoiceId) INNER JOIN LEFT JOIN TransactionLog ON Invoice.dbInvoiceId = TransactionLog.dbInvoiceIdWHERE (dbInvoiceDate Between #4/1/2006# And #4/30/2006#) AND (TransactionLog.dbTransCode <> "CRDC") AND (Invoice.dbActualTotal > 0) AND (InvoiceItem.dbItemCode Between '57506' AND '58115') AND (InvoiceItem.dbItemCredit = False)ORDER BY Invoice.dbInvoiceDate, Invoice.dbInvoiceNum, TransactionLog.dbTransCode DESC;Now problem from above query is that I not only want invoices with items from the range(InvoiceItem.dbItemCode Between '57506' AND '58115')also want invoices with items in range of(InvoiceItem.dbItemCode Between '1' AND '5267') AND/OR (InvoiceItem.dbItemCode Between '57506' AND '58115')Invoices with items could either be just in range of '1' AND '5267' AND '57506' AND '58115'.I am not interested in invoices in range '1' AND '5267' without the range '57506' AND '58115'. For every invoice in the range of '57506' AND '58115' it will have a range '1' to '5267'.The above query just rips out the invoices with items in the range '57506' AND '58115' and showing duplicates and not the items also contained in range '1' to '5267'. Writing separate queries and extracting and looping takes far too long especially if total database dump was involved. It could take 20 mins to create report due to volume of records could be somewhat over 300K. I have hope and done before in one query that takes little time, however this seems little complicated.Any help would be much appreciated.
View 13 Replies
View Related
Apr 7, 2008
Hi, I hope that some one can help. I have column that ends with (1232) how can i extract only the 1232 for example,moved car to blablabla(1232) I want to create a new column and insert only what's in Parentheses. thanks in advance.
View 12 Replies
View Related
Apr 18, 2006
Hi, I have a couple questions about a project I am trying to work on right now.
I am very very new to Access but am learning quickly. I just wanted to run this by everyone and see if any of you had any ideas.
The goal of my database is to track patients from our clinic. I have it set up as follows:
1 table containing basic patient info: Med record #, name, date of birth, age, gender, family history of cancer, etc etc etc.
1 table listing all the possible diagnosis of cancer that we treat in our clinic
1 table listing all the procedures that are performed by our surgeon
--------
Here is the issue. I can enter all the patient info with NO problem. All my lists populate nicely and I have dropdown boxes to make it easy to choose items, etc. I cannot, however, figure out exactly what I should do if a patient has multiple surgeries, multiple diagnosis, and even multiple testing types done on tissues from each of those surgeries.
How on earth can I set up a form so that I can enter all the basic patient info. Then enter a procedure and a diagnosis - then enter a second procedure and a second diagnosis (though the diagnosis would most likely be exactly the same as the first procedure). I don't want to have 3 records for each patient if we perform 3 procedures during one surgery visit. If the patient comes BACK for another surgery, that is a different matter.
Sorry for the long post but I appreciate ANY help anyone can provide.
View 4 Replies
View Related
Jun 16, 2007
Hi ,
say I have a table:
video: id, title, artistname, countryid
that has the values
1, 'VideoA','Artsit123' ,4
2, 'VideoB', 'Artsit567' , 5
3, 'VideoC', 'Artsit167' ,6
4, 'VideoD', 'Artsit890' , 7
5, 'VideoE', 'Artsit468' , 8
6, 'VideoF', 'Artsit752' , 9
And another table country: id
that has the values:
1,4,5
Basically is there a query that can be written for me to check if ALL the countryids from the country table will return an artist, and if not can it let me know. For example obviously there is no countryid with 1 in the video table so Im not interested in that batch in the country table. I know I can just execute the query 3 times to see if a result is produced but what if the country table is massive (btw the country table is generated dynamically using xml). Any help on this would be very mch appreciated
View 2 Replies
View Related
Nov 14, 2007
(Hope this is in the right place)
Hiya Guys,
I am not new to Access, but have only before created basic databases with simple structures and I am having problems with my latest project.
The idea is to have two tables, “tblStudents” and “tblClasses”. I also want to have a form called “frmClasses” and this is proving a bit of a problem. I am trying to display the class data for each class record on the form (Time, date, details), but below that want a table containing all of the students which are registered to that class, which at the moment is just causing me to go round and round in endless circles.
Sometimes, the form just won’t load and after I change it, it will just put in duplicate records containing the same class data but a separate record for every student in that class.
I have a relationship set up in the database which links the field “ID” in students to the field “student_ID” in Classes. But I think that the problem may be there. I can post a copy of the database if you want.
Any help appreciated,
Chris Farrants
View 2 Replies
View Related
Jul 22, 2005
im am making a database to keep track of the soldiers in my company. right now i have come across a problem and am having troubles with entering the phone numbers. i have three tables for this purpose;
soldier(SoldierID, SSN, LastName, FirstName.....)
phone(PhoneID, Number, Type (cell or home))
soldier_phone(SoldierID, PhoneID)
in my main soldier form which uses the soldier tbl for its data i embeded a form to enter in phone numbers, which doesnt work. long story short, i can only get the phone table to be filled out, but the soldier_phone table never gets any values so the phone number never gets linked to the soldier.
any help would be great, thanx.
View 2 Replies
View Related
Jan 25, 2005
I have created a basic client contact database, and dependent upon whether the client is classed as say, as a decision maker, or as an influencer will affect when they should next be contacted. I have attempted an expression in my Date of Next Contact Field using my Classification field, and Date Last Contacted field. If there is no date in the date last contacted field, I just want the current date returned.
Please note I have never typed expressions in Access before, only Excel !! This probably explains why this isn't working!!!!. It says "the expression you entered contains invalid syntax (you may have entered an operand without an operator)". Can any expert tell me what I've done wrong??? Don't tell me, it's simple.....?! Here goes:
=IIf([Classification]="Decision Maker" And iif(IsNull[Date Last Contacted], Date(), iif([Classification]"Decision Maker"
And iif(IsNotNull[Date Last Contacted], [Date Last Contacted]+30,” ”))))
When I can get this to work, I want to add to the expression for different classifications.
Many Thanks
View 3 Replies
View Related
Oct 4, 2005
I have searched and tried previous examples to only fail in this process.
We have a database that is accessed by over 20 employees at one time and virtually every day we run into the same problem. Someone is trying to edit a record but can not do this due to another user being logged into that specific record. Not knowing who is in the record burns valuable working time trying to hunt down the individual and getting them to filter out of the record so it can be edited by the other user.
To eliminate this pointless search, I would like to create a simple box in the form that displays who is logged into that specific record (if any). That way we know exactly who is in that specific record and we can call them directly.
I have attempted the many examples in the searches of this forum but it may have to do with my lack of knowledge working with Modules or Expressions. Current User only displays your own user ID making it useless in this case.
Any help is greatly appreciated!
John
View 4 Replies
View Related
Feb 16, 2005
Hi, got a small problem. As part of a database I have to do for a booking system for a conference centre I have a form (frmSummary) that displays the results of a query (qryT101Book), the query itself displays all the bookings for a certain room from today onwards. This form only displays a summary of the information. I have placed a button on the form to call up the main booking form, (frmBooking) which allows the input of all the data for the booking. On ythis second form, frmBooking, I have placed a button to save the record and update the display on frmSummary. The code I have used for this is Forms![frmSummary].Requery and it works okay, the form is updated. However, tomake it easier to confirm the booking has occurred I would liketo have the cursor move to the last record, i.e. the new booking, on the frmSummary once the command button on frmBooking is clicked. If it was a one record per form situation i would use SetFocus but I'm unsure how to go about this one.
Any ideas please?
Thanks, Lol
View 5 Replies
View Related
Feb 17, 2005
In one of my forms I have a date field. I have a macro button to send that date to appear on an Outlook task.
Is it possible for my date field to appear in different coloured text once the macro button has been pressed, so that I know it's been sent and don't send it twice?
Now I know that for most of you experienced users out there, you would probably just make my macro do a loop?? so that all dates from the database reach Outlook, but I'm so new to this that the above method seemed possibly easier?!
Any ideas? Oh, here is the code used for my macro - so if anyone can tell me how and where I add code to loop this, please let me know!!!
Private Sub cmdOutlookRem_Click()
Dim OutlookApp As Outlook.Application
Dim OutlookTask As Outlook.TaskItem
Set OutlookApp = CreateObject("Outlook.Application")
Set OutlookTask = OutlookApp.CreateItem(olTaskItem)
With OutlookTask
.Subject = "Contact " & Me!Forename & " " & Me!Surname & ", " & Me!CompanyName
.Body = "Company Tel No: " & Me!CoTelNo & ", " & "Direct Line: " & Me!DirectLineinCo & ", " & "Mobile: " & Me!MobileNo
.ReminderSet = True
.ReminderTime = DateAdd("n", 2, Me!DateNextContact) 'Remind 2 minutes from now.
.DueDate = DateAdd("n", 5, Me!DateNextContact) 'Due 5 minutes from now.
.StartDate = DateAdd("n", 2, Me!DateNextContact)
.ReminderPlaySound = True
.ReminderSoundFile = "C:WindowsMediaDing.wav" 'Modify path.
.Save
End With
End Sub
View 3 Replies
View Related
May 4, 2006
Each time a person enters a part number into the form they will have an option to pick and load other forms. Looking to have 1 form with a cmd button that when pressed will go out and retrieve an object or objects (spreadsheet, word document and etc) and then place in the OLC’s and rename and store this object on a drive with the name of the part number and form name
I want the templates never to change or be updated. Only the objects store on the drive after the command button is pressed or the Ole object is double clicked can be edit.
I've tried hyperlinks, do not want to have operators do save as, also I would have to have all the forms entered for each part number prior to versus just using templates and having them be stored.
Example of save forms names
c:mydocuments racking12341234-Template-1
c:mydocuments racking56785678-Template-2
Not even sure this can be accomplished. See attachment for a visual idea.
thanks dmh
View 7 Replies
View Related
Dec 1, 2006
hi
i wondered if anyone could help me with a formula i am trying to construct.
i have a report which is based on a query where the user types in the ID of the project they want to view.
here is a screen shot of the report
http://i132.photobucket.com/albums/q19/lost989/formula.jpg
i wondered whether it was possible to have a calcualtion to show how much was spent on different categories.
so there would need to be a formula to calculate all those records named as timber thier indivdual cost times the quantity of each. i need this for each category of items.
is this possible?
any help is appreciated
thanks
View 1 Replies
View Related
Jun 29, 2006
Hello,
This db I'm working on tracks the latest revisions of drawings. Multiple drawings fall under a work package, and multiple revisions of a drawing are present (listed 1, 2, 3, ...). I want to pull information about the latest revision of a drawing, including the drawing number, the tracking ID from the tbl_wkpkg_dwg_rev table, and the corresponding dwgTitle from tbl_dwg. The tables are joined through the field wkpkg.
I have my select statement partially working; it works on one table. This is what it returns:
dwg1 3 id1
dwg2 1 id2
dwg3 5 id3
Here is the statement:
SELECT r.dwg, r.revision, r.trackingID
FROM tbl_wkpkg_dwg_rev r, (SELECT MAX(revision) as maxrev, dwg FROM tbl_wkpkg_dwg_rev GROUP BY dwg) MaxResults
WHERE r.dwg = MaxResults.dwg
AND r.revision = MaxResults.maxrev;
So I would like to join it to tbl_dwg and get:
dwg1 3 id1 DrawingTitle1 wkpkg1
dwg2 1 id2 DrawingTitle2 wkpkg1
dwg3 5 id3 DrawingTitle3 wkpkg2
However, when I try and join it with tbl_dwg to get the other information, it returns this:
dwg1 3 id1 DrawingTitle1 wkpkg1
dwg1 3 id1 DrawingTitle1 wkpkg1
dwg1 3 id1 DrawingTitle1 wkpkg1
dwg1 3 id1 DrawingTitle1 wkpkg1
dwg2 1 id2 DrawingTitle2 wkpkg1
dwg2 1 id2 DrawingTitle2 wkpkg1
dwg2 1 id2 DrawingTitle2 wkpkg1
dwg2 1 id2 DrawingTitle2 wkpkg1
dwg3 5 id3 DrawingTitle3 wkpkg2
dwg3 5 id3 DrawingTitle3 wkpkg2
dwg3 5 id3 DrawingTitle3 wkpkg2
dwg3 5 id3 DrawingTitle3 wkpkg2
dwg3 5 id3 DrawingTitle3 wkpkg2
I tried using SELECT DISTINCT, with no luck. I'm out of ideas, so any help would be appreciated! :confused:
Thank you!
View 2 Replies
View Related
Mar 18, 2005
Well I find it complicated.
I have a table of people, each with an ID, and I have a table of events, each with an ID.
I want to design a form in such a way that when you look at each person it gives a row of event fields, one for each event, into which you can put a Number for the number of tickets that each person wants (each person will only want to go to a few events).
If you enter a number, I want the form to generate new record in a separate table (tickets) with three fields - the Person's Id, the Event ID and the number of tickets.
I only want one ticket record per person per event (so if the numer of tickets changes I want the form to amend the number, not create a new record.
So, I want the Form to show "page" for each person, with "fields" for each event, the info being stored in a separate table, which the form is able to cycle through, despite the fact that there will not be records for every person.
I am a bit flummoxed as to how to design it.
Can anyone give me any guidance, please.
View 4 Replies
View Related
May 22, 2015
I need to generate quotation numbers for the quotes that I will be populating from my database. The process now is simply the format of date-n. The date is in standard format being "05222015" and the n is simply the number quote generated on that given date, For example the first quote generated today would be 05222015-1. Best way to generate these numbers automatically.
View 1 Replies
View Related
