Query Not Using Fields On Form Instead Asking For Parameters To Be Entered
Mar 15, 2007
I have created a query that will pull the price of a property into the cost field combo box on a booking order subform depending on the values of the start date and property number enter onto the same form.
The query gets the price from the property price table matching on the property no i've selected on the booking order subform and also the start date i've entered on the booking order subform which needs to be between the start and end date fields in the property price table.
Fields in the property price are property price no, property no, start date, end date and price.
Also the booking order subform is a subform on a booking form
This is the query i have created:
SELECT [Property Price].Price
FROM [Property Price]
WHERE (((forms![booking order subform]![start date]) Between [property price].[start date] And [property price].[end date]) And (([Property Price].[Property No])=forms![booking order subform]![property no]));
The problem is when i run the query from the cost combo box the query isn't picking up the fields on the booking order subform instead its bring up a seperate meesage box from parameters start date and property number to be enter.
Can someone give me advise how to make the query use the values in the fields on the booking order subform i enter before running the query. cheers
View Replies
ADVERTISEMENT
May 17, 2006
Hello all,
I realise this issue is a common one and it is usually down to simple typos (I've looked at several similar posts) but none of the advice I've seen has solved my problem. I've designed the following Union Query:
SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 1]
UNION ALL SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 2]
UNION ALL SELECT [Email],[Title],[First_Name],[Last_Name],[Company],[Phone],[Country],[TEST_AND_MEASUR],[REC_AND_PROD],[LOG_AND_TRANSC]
FROM [Region 3];
It should be very simple and I've checked it over and over, but when I run the query an Enter Parameter dialog appears prompting me to enter Email.
If I just click OK I get all the records but with the email field blank.
Similarly if I type x@y.com it returns all records but with the email fields all containing x@y.com
Advice would be very much appreciated!! Thank you in advance.
Abi
View 2 Replies
View Related
Feb 11, 2014
I am trying to create a query that will provide a field for each day of a month. However, I want the query to be able to work for any month that I want to run on based on a parameter. Basically I want this:
Day 1: Sum(IIF([ReleaseDate]=#[# of Month]/1/[# of Year]#,[GamesSold],0)
Day 2: Sum(IIF([ReleaseDate]=#[# of Month]/2/[# of Year]#,[GamesSold],0)
and so on for 31 fields.
This is not currently working.
View 8 Replies
View Related
Jul 19, 2007
Hi everyone...
I'm a high school student working on an Access project for a summer internship. I needed your assistance in writing a criteria for a select query.
Table1 has the following fields:
ID, First_Name, Last_Name, Org, Email, Status
Only "Email" is mandatory, ID is autonumber, the rest are optional.
I have to create a query that will allow users to search the table with any of the fields above. A user may search with only one field, e.g. all users where "org" = "YMCA"
Presently, I am using the similar criteria for all the fields:
Like "*" & [Forms]![Search]![txt_FirstName] & "*"
The problem occurs when, for example a record exists with the following -
First_Name = Null or Blank
Last_Name = "Smith"
If you search for "Smith" in Last_Name, then the record does not show up, because First_Name in the record is blank.
How can I alter the criteria for it do search correctly?
I already tried:
Like "*" & [Forms]![Search]![txt_FirstName] & "*" & ""
Thanks,
Gautam
View 7 Replies
View Related
Jul 19, 2007
Hi everyone...
I'm a high school student working on an Access project for a summer internship. I needed your assistance in writing a criteria for a select query.
Table1 has the following fields:
ID, First_Name, Last_Name, Org, Email, Status
Only "Email" is mandatory, ID is autonumber, the rest are optional.
I have to create a query that will allow users to search the table with any of the fields above. A user may search with only one field, e.g. all users where "org" = "YMCA"
Presently, I am using the similar criteria for all the fields:
Like "*" & [Forms]![Search]![txt_FirstName] & "*"
The problem occurs when, for example a record exists with the following -
First_Name = Null or Blank
Last_Name = "Smith"
If you search for "Smith" in Last_Name, then the record does not show up, because First_Name in the record is blank.
How can I alter the criteria for it do search correctly?
I already tried:
Like "*" & [Forms]![Search]![txt_FirstName] & "*" & ""
Thanks,
Gautam
View 2 Replies
View Related
Sep 11, 2006
I have created a form with multi-select list boxes, behind which is the following code to transform the users' selections into query parameters.
Dim db As DAO.Database
Dim qdf As DAO.QueryDef
Dim varItem As Variant
Dim strCriteria As String
Dim strSQL As String
Set db = CurrentDb()
Set qdf = db.QueryDefs("Test")
If Me!lstAB.ItemsSelected.Count > 0 Then
For Each varItem In Me!lstAB.ItemsSelected
strCriteria = strCriteria & "Centres.[Area Board] = " & Chr(34) _
& Me!lstAB.ItemData(varItem) & Chr(34) & "OR "
Next varItem
strCriteria = Left(strCriteria, Len(strCriteria) - 3)
Else
strCriteria = "Centres.[Area Board] Like '*'"
End If
strSQL = "SELECT * FROM Centres " & _
"Where " & strCriteria & ";"
qdf.SQL = strSQL
DoCmd.OpenQuery "Test"
Set db = Nothing
Set qdf = Nothing
End Sub
I would like to allow the user to set, on the same form, which field they want the resultant data to be sorted by, preferably by having a tick box alongside each list box, which sets that field as the sort field. The form will obviously need to allow only one of these tick boxes to be selected.
Can anyone advise me on how to modify the above code to make this possible?
Thanks,
Gary
View 1 Replies
View Related
Aug 19, 2007
Hi There,
I am trying to get a query to pull dates from a form to use as limiting parameters for a report. One of my forms has the user enter a range of dates into two text boxes (a from-date in one box and a to-date in another) as the range of dates they want to pull information from a table via the query. These dates are also used in the Title header of the report that is generated from the query information.
How can I get the query to use these dates in the text boxes, rather than having to use the "between / and" command on the criteria line of the query design?
If I just have parameter windows pop up and have the user enter the dates there, I can't use those dates for the report, or can I? Any help would be appreciated. Maybe I haven't explained this properly, if so, I'll try again if I've just confused you.
View 3 Replies
View Related
Dec 20, 2006
I am attempting my first access database which tracks blood components in our medical facility. When a component is issued to a patient there is a button to push which links to a report that runs a query. The user must enter the unique key for the component at a promt, which ensures the report generated will be for that component only. My question is if there is a way to cpture and use that key automatically when pressing the button. If I need to clarify something, please let me know--I may not have the Access developer lingo down yet...
View 2 Replies
View Related
Aug 15, 2006
I would like to have a user enter a start date and an end date into two
textboxes on a form. The two dates will be used to query a table. I
would then like to print a report that was created from that query.
Here is the query created as a stored procedure:
SELECT Transactions.*, Hoods.*
FROM Hoods INNER JOIN Transactions ON
[Hoods].[ID]=[Transactions].[BoxID]
WHERE ([Transactions].[Date] Between [@StartDate] And [@EndDate])
ORDER BY [Transactions].[Date];
What would be the best way to pass txtStartDate to @StartDate and
txtEndDate to @EndDate in the VBA code of the form? How would I open or
print the report created from that query filtered on that date range?
Any suggestions? Am I going about it wrong? Should I have created the
report from the above query, or should I do it another way? Can anyone
direct me to some code that does all of the above or something
similiar?
Thanks.
View 14 Replies
View Related
Oct 18, 2013
I have a query and a form, and what I want to be able to do is have the user type in within the form the parameters for the query.
The part of the query that will hold the parameters is based on an amount (formatted as Currency), but I want the user to be able to enter >10 , =<100 or >100000 and get the correct results.
I have already set up the query and the form with unbound cells which are then referenced in the query I've tried just one cell where the user would enter >100000 or tried two cells where one cell would be for >,< etc and one cell for the value (which is formatted as currency), but that didn't work either.
The idea is that you enter the parameter and value then click on a button that runs a macro to export the query based or the user parameters, but everytime I try it I get a box appearing saying Property not Found.
View 1 Replies
View Related
Aug 4, 2014
I have a navigation form that will have 6-8 tabs. We were using about that many databases, but we are finally consolidating them into one. The result of us using so many databases has been the multitude of forms and reports that were necessary for each database prior to merging them together.
The problem: There will be anywhere from 12-20 (text boxes) that the user can use to search anything in our database. What we need to have happen, if possible, is for those search parameters to show up in the header of our report if they have text in them. If the text box is blank, it should not show up in the header of the report.
I have read how to to do the start/end date technique, but I do not know if that would work for what we are doing since the boxes would only show up if they are populated by the user.
View 4 Replies
View Related
Jun 6, 2013
There is a command button on my form that calls a filtered query. I'm filtering the query based on a combo box within the form using
[Forms]![frmAssignDwgs]![Combo15]
It works beautifully until I put the form as a subform in the Navigation Form I'm using. When I execute it from within the Navigation form, it errors out looking for [Forms]![frmAssignDwgs]![Combo15].
Is there another syntax I can use so this will still work from within the Navigation Form? Or another way to approach this functionality?
frmNavigation is the main navigation form
frmAssignDwgToPkgs is the subform that holds Combo15
I found another thread (which I can't link to since I'm new) and tried various arrangements of the following to no avail.
[Forms]![frmNavigation]![NavigationSubform] .[Forms]![frmAssignDwgToPkgs]![Combo15]
View 3 Replies
View Related
Nov 7, 2007
I have a database for police officers to enter their daily activity. For example on arrests, Date:_____ Drugs____DUI___
The officers enter the date and the total number arrested for each charge. I want to print a monthly report. How do I make the report print this information for a specific date range? The way I have it now, it asks for the startdate and enddate, but it still totals every record, not just the date range.
View 14 Replies
View Related
Dec 16, 2013
I have a form (based on ArtistSong) and a subform tied to the ArtistSongID. This subform is a set of 11 variable attributes of that Artist & Song combination. Also, there can be multiple records in that subform, all associated with the Artist & Song.The user would like, when he makes an initial entry of 11 attributes, to go ahead and repeat that particular combination in the next New Record.
View 3 Replies
View Related
Dec 14, 2012
The following SQL event will not update the CustomerData table if the FrmContact field on the form is left blank. I have this code in the OnLostFocus Event. Is it possible to have this command update the fields that do have data entered in them even though the FrmContact field is blank?
DoCmd.RunSQL "INSERT INTO CustomerData (CustomerName, CustomerAddress, CustomerCityStateZip, CustomerPhone, CustomerContact, LockRecs) " & " VALUES (""" & Forms!frmflcdeliver.Controls!FrmCompany & """ , """ & Forms!frmflcdeliver.Controls!FrmAddress & """, """ & Forms!frmflcdeliver.Controls!FrmCityStateZip & """, """ & Forms!frmflcdeliver.Controls!FrmPhone & """, """ & Forms!frmflcdeliver.Controls!FrmContact & """, """ & Forms!frmflcdeliver.Controls!FrmLocked & """)"
View 2 Replies
View Related
Apr 22, 2014
I am trying to import XML into access however have noticed that Access 2013 is not importing fields/parameters found within tags. For example:
<locations>
<locationelement description="Master Location" dns="tester.test.com" key="M0" lastupdated="Never Updated" pdport="5555" port="5551">
<monitoringperiodtimezone>EST5EDT</monitoringperiodtimezone>
<monitoringperiod days="Sunday" hours="28-95" />
<monitoringperiod days="Monday,Tuesday,Wednesday,Thursday,Friday,Saturday" hours="all" />
</locationelement>
</locations>
When importing, Access creates a table location element with fields for monitoring period timezone (containing EST5EDT) and monitoring period (containing nothing). I was wondering if there is a way to access fields such as description, dns, key etc or days, hours, ie fields that are within a tag.
View 4 Replies
View Related
Jul 26, 2014
I am trying to add the current date and time into separate fields after an ID is entered.
Code:
Option Compare Database
Private Sub ID_AfterUpdate()
Me.Date_Received = Date()
Me.Time_Received = Format(Now(), "hh:mm AMPM")
End Sub
View 5 Replies
View Related
Mar 6, 2013
how can i to save the values entered into unbound text boxes to fields in table
View 2 Replies
View Related
Sep 9, 2013
How to disable fields in Access based on data entered in a previous field? For example if "yes" is chosen from a drop down show "Date field" if "no" is chose hide "Date Field".
View 2 Replies
View Related
Aug 30, 2004
I have a parameter query with 5 possible user entries.
The criteria for all my fields is set up as follows:
Criteria: IIf(IsNull([Enter County]), "", [Enter County])
Or: Like "*" & [Enter County] & "*"
If the user enters something for 2 or more parameters it seems to work, but if they just enter a county, for example,, it gives an error message about the expression being too complex.
Any suggestions.
Thanks.
View 9 Replies
View Related
May 19, 2005
Hi there
I have a small problem that I was wondering if someone could help with.
When a user creates a new record I would like it so that some html is written automatically in to a defined column.
Is this possible? I tried to use the default value property of a column but access does not like it.
Any ideas :confused:
Thanks :D
Jools
View 14 Replies
View Related
Nov 8, 2004
HELP!!! I am getting quite desperate. I am a novice. I have made a database for customers, products, etc. They all have good relations. I have made a query where I can see who bought what and when and how much it costs. Now here's the problem. When my prices in my product list (this is the table of which the prices show up in my form) have to be altered (because of prices going up), it automaticaly changes the query and the form!! According to messages stated in this forum, I have opened the properties in the text boxes and changed the price fields, "enabled" to no, "locked" to yes, and the forms DataEntry to yes. Strangely in the North Wind example, the prices shown in the form (entry form), are extracted from the subformdetails table. But how can you extract something from a table if there is nothing in the table?? Totaly I have four tables (Orders, Orderdetails, Products and Customers) Alle these tables are joined on a one to many basis.
Please can somebody help me.....
Thank you
Anouk (Netherlands) :confused:
View 14 Replies
View Related
Sep 11, 2007
I have a form with several tabs on it, where the user enters various info.. I want to have the user hit the save button and have all info saved to a single table. Is there an easy way to do this. Please excuse my ignorance but I am fairly new to Access. Thanks in advance!
View 9 Replies
View Related
Oct 1, 2005
Hello, I have a program/database that I'm building in Access 2003, It has new client/bid entry form that has many text boxes for instance: Client, address, Phone numbers, Date etc. These text boxes are actually populating the same text fields in the PrimaryBid_Master form.
My question is every time I fill out the client entry new bid form and then exit to the PrimaryBid _Master form it defaults to the very first record entered, and I would like it to default to the last record entered, The record I just got done entering into the new client bid form, this would save me from having to filter/find it every time I enter a new bid/client, Is this possible and if so Can you describe to me how I can have my program do this?
Thanks--Chuck I really appreciate any help/suggestions.
View 3 Replies
View Related
Oct 18, 2004
Hi all..
This is my first question posted on this site. I have created a survey with questions to be answered. The database is already populated with records of the people's names who were getting the survey. What I need is when the data entry clerk brings up the customer's name on the form, is that they are forced to enter the surveys answers for certain questions before they click the "Save" button. The answers are set up as radio buttons on the form (ie Less than 6 Months, 6 Months, 8 months and 1 Year).
Not sure if a Before or AfterUpdate macro is needed?
Any suggestions would be appreciated. Please email me directly if you have code.
Thank you
View 2 Replies
View Related
Jan 10, 2005
Hi,
I am new here and have been using the build features (and not the code as I do not understand this) to build my registration database.
I have several tables of imported data nicely displayed in one form with tabbed sections. When I tried adding new records by entereing them in the form, they are saved in the underlying tables but the new records are not displayed in the form when I go back into the form.
All the tables seem to be linked to the form when I go into the form selector and Edits are allowed in the property box.
Any ideas on what the problem might be?
Danielle.
View 2 Replies
View Related
