Query Opening In Report, Not Record View?
Feb 5, 2007
I have a query that searched thru records based on a person's last name. It runs fine and returns the results I want. However, the view of the results is in record-view. I'd like the results to be in a report format. Is this possible? The macro that calls the query is set to display in report view, but the query always come back showing the records. What am I missing here? Thanks a ton for your time!
James
View Replies
ADVERTISEMENT
Mar 19, 2006
Im sorry about the stupid questions!
How can I open a report in a view which will let me test my buttons? I only seem to be able to open it in print preview!
View 4 Replies
View Related
Mar 4, 2015
In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
View 1 Replies
View Related
Sep 17, 2014
So I have a code that opens a query but I want the PivotChart to show. Below is my code related to opening the query.
If vartyp = 0 Then
varQueryName = DLookup("Query", FileName, Criteria)
If IsNull(varQueryName) = False Then
DoCmd.OpenQuery varQueryName, acNormal
End If
View 1 Replies
View Related
Apr 19, 2006
I have a report which shows all the records in my database. I have a command button on my form which brings up that report for preview.
How can I get the button to bring up that report showing only the current record being viewed on the form?
Do I need a separate report and what criteria/VB code is required?
View 1 Replies
View Related
Feb 11, 2014
I can open a report right with a wherecondition that opens a report based on an agent name..
DoCmd.OpenReport "SelectPSReport", acViewPreview, , "[PS_Agent]='" & Me.CboAgt & "'"
But it returns every record for that agent and I want to be able to specify the date that goes with the name.
For example Tom has a record for Feb 10, Jan 10, and Dec 13. I only want to see the record for Dec 13.
I am able to see this in my form by having a combo box for the agent and the date (the date box being based on the agent box). So now how can I add a condition to include the date combo box?
DoCmd.OpenReport "SelectPSReport", acViewPreview, , "[PS_Agent]='" & Me.CboAgt & "' And [PS_dDate]='" & Me.Cbodt & "'"
Adding the condition gives me and type mismatch error, which I think may come down to the date combo box on the form having 3 columns (only 1 is visible).
View 12 Replies
View Related
Aug 14, 2006
hi
i have 3 queries brought together in 1 form. i do not want a report to be printed out just the current record in form view. this is because i have a number of images per record.
if i print out the current record and it only has 1 photo in a sub-form attached to the main form record, then the main form will print on 1 page which is what i want [screenshot 1]. But if there are 2 or more photos attached to the main record then the print command button prints out 2 pages for 2 photos, 3 pages for 3 photos and so on [screenshot 2].
any ideas as to how to limit the print command button to print out only 1 page per record regardless of how many photos their are attached to each record??
thanks
View 1 Replies
View Related
Dec 7, 2005
How do I get a query to run upon opening a report. My report has a few fields from a query that once the user inputs information the query is obviously outdated. Since it needs to be as simplistic and user friendly as possible I won't ever have them run the queries themselves so I'm trying to have them run to be updated for the report when the user goes to open the report.
View 1 Replies
View Related
May 23, 2007
Hi,
I've got a DB where I need to simply change a few images on the form buttons. When I open the file I cannot access design view at all. There is no toolbar and the menu doesn't contain View, just file, edit etc. I can edit the properties of the records etc but this is all I can do. I thought maybe it had something to do with it being created in a different version of Access but still it will open in this way only. There is no messae telling me I'm locked from anything and I've tried ctrl + enter etc. I'm running Access 2003.
Does anyone know what's wrong? Its driving me nuts. :confused:
View 4 Replies
View Related
Apr 10, 2007
Hi, new to the forum hoping someone can help :)
I'm half way through a project and want to have 3 queries to search personal information (Surname/DOB/Ref Number) is it possible to select the record in data view from the query search and jump to the record in form view? Would I have to display the query differently or is it possible to just click within the normal query view?
Any help would be appreciated, thanks Harry
View 1 Replies
View Related
Jul 9, 2007
Hello,
When I attempt to open any of my Access databases I am presented only with the form that has been selected as the 'startup' option. Furthermore, it seems to be impossible to switch to 'design' view and my only options on the toolbar are File, Edit, Insert, Records, Windows, Help. As far as I can tell, none of these enable me to select the options required to give me my entire database back.
I am something of an Access novice, so if the above problem seems familiar to anyone i'd be grateful for the solution! The help option within MS Access hasn't been particularly useful.
Many thanks,
David
View 3 Replies
View Related
Jun 30, 2005
I have a main menu that I select things to open. Most of the things I open I open in form view but some I want to open in data sheet view.
Without recoding my menu code is there a way to specify in the form to be opened that it should open in data sheet veiw?
Right now I have the default view as data sheet view in the forms but because my calling code is not specifying any view they default to form view, and again I don't want to edit that code in my main menu.
View 3 Replies
View Related
Sep 17, 2014
I'm trying to open a form in datasheet view using the following code
Code:
Private Sub Run_Activity_Duration_Totals_Click()
DoCmd.OpenForm ("frm_Activity_Duration_Totals_25_Hours"), AcFormView = acFormDS
End Sub
I keep getting a message saying
Compile Error: Type Mismatch
and the equals sign is highlighted in my code.
View 2 Replies
View Related
May 8, 2014
I have read various answers on how to open a form in Datasheet view from VBA code, but I can't get my syntax correct.
Here is one of my 50 attempts to guess at the format. Removing different components, separators, variables only gets me a syntax error of missing separator or "expected =".
DoCmd.OpenForm ("frm_OrdersHOTHeadersOnlyWORKSHEET", [View as acFormView=acFormDS], , , , ,[acFormEdit])
View 3 Replies
View Related
Apr 15, 2015
I have a form in datasheet view that has a user directory with a list of each person. On each row you can click to open another form that contains the users details using the below VBA:
DoCmd.OpenForm "User Details", , , "[ID] = " & Me.ID
But once you open to that specific record, no other records are available to navigate to.
I want to be able to stay on that detail form that was opened and go to another record.
How do I continue to pull up that specific user in my detail form, but also load the others so I can navigate to them from the detail form without having to go back out to the datasheet form?
View 7 Replies
View Related
Jul 28, 2013
I am setting up a generic form template that will enable me to maintain data in a standardised way. All generic code is stored in a module. There is very little code specific to the table being maintained. Much of the form functionality is determined by data held in supporting tables therefore data driven.
When a form is loaded a commonly named query is created that is used as the Record Source of the form. This query only ever returns one record and uses the value of textbox on the form as criteria in the unique id field.
Despite immediately creating the query in the Open event of the form, Access tries to process the form first and returns an error as the Record Source query applies to another form, the one last opened.
How can I create the query before anything on the form is referenced / processed without creating it before the form is opened?
View 3 Replies
View Related
May 19, 2015
I have 4 forms in my access file. Now I have 4 buttons in html and I wanted to know if there was a way to open a specific form view based on the button click in the html page.
So access will open and show the form that is linked to the selected button in html.
View 14 Replies
View Related
Jul 1, 2005
I have made a couple of posts about this and had no response as yet. Maybe i didn't explain it well.
I have a form that logs emails. The emails are either "to" or "from" a person. I want to have two queries that pick out either to or from. Now each person i know sends me several emails over time obviously but i am only concerned with their last email or MY last email to THEM because that determines if i should email them back or if i am waiting for them to contact me. At the moment i am having problems filtering out the last record for each person which determines whether i need to email them or they need to email me. I also use the record to log when the last mobile text was sent, phone call etc so it is not just emails. The following is what my formsfields look like
CommunicationID
Communication type
TO or From
Date
Day (automatically taken from the date)
Subject
I cannot for the life of me get the filter to work properly. Currently i am either getting more than one record for each person or the results are jumbled up. I really need a better understanding of how to use the totals thingy in the querys design view. I'd really appreciate some help on this. Thanks....Ross
:confused: :confused: :confused:
View 6 Replies
View Related
Dec 17, 2013
I'm trying to protect the frontend of my database from unwanted changes. How to disable the navigation pane, ribbon, and only display my navigation form. My navigation form has 10 buttons that open forms for data entry. I only want the users to be able to open forms and add data. I don't want them to be able to go to the navigation pane or anything other than the forms.
View 2 Replies
View Related
Aug 19, 2007
Does the MS Access Report support Hide/Show specific fields according to parameters or even by click?
View 3 Replies
View Related
Sep 13, 2005
Im not sure if this is the right place to put this but I was wondering if you could help me:
Say I have database with forms that display records or people ie name, address, postcode, etc. What I want to do is display a list of Names then from that list I can double, single click and open the record details.
Id call my self and amatuer at access and am probably guessing this is done via vscript or something else, but any help will do.
Thanks
Alex
View 14 Replies
View Related
Dec 23, 2013
I have got problem with ms access report. I want to make a report which is based on
1) first master table
2) first slave table
3) second slave table
I have done some research and decided to do some form with subform. So I have got the view one record from master table and many record from slave tables in one view.
But it turned out that it has become duplicate records. (the relationship are ok - it duplicate master record as many as slave records)
So:
1) how i can do ms access report from multiple tables - one master record with multiple records form slaves tables
View 5 Replies
View Related
Sep 16, 2011
I created a search form that searches for Customer Number, Part Number, and Revision Number. The results are displayed in a List Box.
I want the user to be able to make a selection on the List Box and click an "Open Selected" button that launches that record in another form. How is this possible?
View 9 Replies
View Related
Apr 25, 2006
I've got a form/subform showing employee/position details. I've disabled the regular record navigation buttons and put in ones of my own. If I'm advancing through all the position records for a particular employee using the next record button, when it gets to the last record, the next button advances to a new blank record. Because I'm prepopulating new record fields with previous record values, the users sometimes don't realize they've just created a new record. Is there a way to advance through records without advancing past the last record into a new blank record? I still need the ability to add new records on this form using the add record button I've created.
Any help is much appreciated!
View 3 Replies
View Related
Aug 16, 2007
is this right?
Code:DoCmd.OpenReport "3rd Party Denial, Report, , [Claims Header].[Claim_ID]=[Forms]![claiminformation]![ReportForm]![Report_ClaimID], Normal"
I get an error stating you entered in either the property sheet or macro is misspelled or refers to a report that doesn't exist.
View 4 Replies
View Related
Sep 2, 2005
Hey there, if anyone could help me with the code for opening a report please. I have a main page with buttons, and need a button for opening reports.. thx
View 1 Replies
View Related