I have a form with a search box, Its UNBOUND called ID . Everytime I search for an ID number it shows no results, However I know there are entries in the table. This is the code I am using :
Code: Private Sub ID_AfterUpdate() If (ID & vbNullString) = vbNullString Then Exit Sub Dim rs As DAO.Recordset Set rs = Me.RecordsetClone rs.FindFirst "[Id] LIKE ' " & ID & " ' "
[Code] ....
I am assuming I need to add something to search for auto numbers but i don't know what!
Here is my issue. In a table with an Auto Number index some records have been deleted. I have been able to recreate them along with their original auto number. The problem is that I do not know how to append these records forcing the original auto number. I have tried changing the auto number field to a number field in the table, this works except I cannot change it back to auto number.
I am sure I’m not the first with this question or issue. I did search through a couple hundred entries about auto number before I posted this question.
I am working on an access database for my team. We keep and maintain a trail log for different departments.
The person will send a trail sheet to us we will input the info and attach what we call Production Instructions Number in this format (YEAR-Month-001), the next trail will get (YEAR-Month-002), the last 3 digits will start over when the month changes, I would like the PI number to populate automatically when the info is inserted.
Part of my access application does invoicing. I have an invoice number table that wholes one field "InvoiceNum". On my invoice report i have the following code:
Code: Private Sub Report_Open(Cancel As Integer) '// lookup invoice number when invoice opens intInvoiceNum = Nz(DLookup("InvoiceNum", "tblInvoiceNum"), 0) End Sub
[Code] .....
Problem: My report open with groupby ClientID and ProjectNum. Multiple invoices print on the same report. If any invoice spills over to second page the Format Code runs again inserting an incremental invoice number to the second page. How can i prevent this from happening?
I have a Primary Key field named Member ID(Number format) in a Table named Mail List. The field is populated with existing ID numbers and my need is to use my Member Entry Form to increment by 1 from the last entry.
I have gleaned from other references that this can easily be achieved by the following entry in the Default Value of the property sheet for the relevant field;
=DMax("Member ID","Mail List")+1
The Form saves without error but when I attempt to add a new record in the entry form, the ID Number reads "#Error".
I would like to know if there is any procedure to restrict/stop auto number increment for certain number of record count (say 50), then increment by 1 for next 50 records.
I'm trying to get the maximum number in a table field to increase it by one depending on the member that is selected in a drop down in a field.
I have three tables: members, programs and times. Each member can have N programs and each program can be broadcast N times.
Each member has a three digit code, like XXX. Each program has the three digit code of the member + three numbers that are supposed to auto increment. That is, the first program of member X with the member code XXX is called XXX001.
What I'm trying to do is that when a new program is filled in and I select the member, then the program code should update automatically, adding one to the latest program by that member.
That is, if the last program by member X that was inserted in the database is XXX010, then if a new program is inserted it should automatically be XXX011, even though programs by other members have been added in between.
This is the code I use now, for the AfterUpdate when selecting the member in a dropdown in the form. But although I've played around a bit, I just get error messages...
Private Sub medlemsruta_AfterUpdate() Dim medlemskod medlemskod = Me![medlemsruta].Column(2)
Dim strMax As String
strMax = DMax("programs_kod", "table_programs", "Left$(programs_kod, 3) = medlemskod") Me!program_kod = Left$(strMax, 3) & Format$(Val(Right$(strMax, 3)) + 1, "000") End Sub
Medlemsruta is a dropdown where one selects the member from the members table, where the three digit code is in the third column (Column(2)).
I'm trying to use DMax to get the maximum number for the particular member and after that adding 1 to that for the new program code.
I'm trying to get an invoice number field to auto generate the next number, keeping the format as "00000"...this is what I have, which gets the next number but drops the leading 0
Code:
Private Sub Customer_AfterUpdate() If Len(Me.[InvoiceNumber] & vbNullString) = 0 Then Me.[InvoiceNumber] = (DMax("[InvoiceNumber]", "[tblInvoiceNumber]") + 1) DoCmd.RunCommand acCmdSaveRecord End If End Sub
invoice numbers are 04024, 04025 etc...how I keep the formatiing?
I have a table with an auto number PK. This table will contain orders. I'd like to use the PK from this table as the Invoice number on the invoice. I'd like to have it start at a number other than "1" just because it looks better on an invoice. I don't know how to do this. I looked at the table design to see if there were options available to me there but couldn't find anything. Is it possible? (I do not know how to use code.)
The title probably doesn't give an idea of what I need, so here goes.
We currently have reference #'s for our bills that include the date requested in mmddyy format, the first 3 letters of the customer, the initials of the order taker and finally a sequential number to show the sumber of bills that day.
example: 120705SEAGMM02 2nd order taken by GMM for Seagate on 12/7 120705SEARLH01 1st order taken by RLH for Seagate on 12/7
I want to generate this number automatically based on the date entered and the initials given of the user. We only deal with one customer at our desk so that will always be "SEA".
I have a query that generates the first portion (date, customer, and initials):
SELECT Format([REQDATE],"mm") AS [Month], Format([REQDATE],"dd") AS [Day], Format([REQDATE],"yy") AS [Year], Format([REQDATE],"mmddyy") AS [Both], [Both] & "SEA" & [PickUpReqData]![INITIALS] AS REFNO FROM PickUpReqData;
But I can't seem to get my head around the part of generating the number. I know I had done this in a database I created 2 jobs ago but all my files were flooded out in Katrina. (I have since relocated to Atlanta, although I'm not looking for sympathy. But I will take what I can get!)
Anything to point me in the right direction will be appreciated. I am looking to have this on a form and feed the REFNO field in the PickUpReqData table.
I have a table called "OrderDetails" with following fields:
Num OrderID (Primary key) Product Quantity Price
I want to create a data entry subform that can used to enter order details in this table such that, for a given OrderID, the Num field is automatically set to previous number + 1. For example, for OrderID = 12, if there are 4 products that need to be entered, the 4 records should automatically take 1 , 2, 3, 4.
I have a field called [Hours] If a user tries to change the [Hours] I need to check if any of these hours have been assigned to staff in another table.
How do I get to run the query and use the value from the result of the query as the Minimum value?
I would like to run sql and if the value is being entered into the [HOURS] field is less then show a message and do not change allow the value to change.
I am sure this can be done in VB but I am am unsure of the syntax
I am trying to count rows in the result of one of the queries and I am having a bit of trouble getting it going.
The current code - this is executed as on-click event when clicked on List Box feed with query below.
What I want to add is simple if that when number of rows produced by the querry is 1 it will enable a picture item in the different part of the form, however it does not want to count the rows for me.
Code: Private Sub search_items_Click() Me.OBSFullFilledOrdersHolder.Enabled = True mysql = "SELECT orders.[order id] , STUDENTS.[first name]& ' ' & students.[surname] AS Name, students.[contact name] AS ContactName , ORDERS.[Online Bookshelf order] AS OBS , STUDENTS.[Delivery Address 1], STUDENTS.[Delivery Address 2], STUDENTS.[Delivery Address 3], STUDENTS.[Delivery Address 4]"
[Code] ....
The query itself works when tested but when used in code with DCount function will return error: Run-Time 2471 the expression you entered as query parameter prouced this error
I have a form with an Auto number field. When the form is opened in new record mode the auto number field displays the following: (Auto Number) instead of the actual number that it has generated. I want the number to be displayed
Hi, I have a form with some fields on it, there is one called Pro Number. what I would like to happen is when a new record is created, it starts at a certain number and continues to increment by one. In other words, the first record would be 5600 and the next new record would be 5601 etc.
I did have this working in an previous database, by creating a append query to start the number, but that does not seem to be working now...
Ive done a search for this and couldnt find any suitable answers. Is it possible to add a function to a query that auto numbers each row returned (so if your query has 10 results, it numbers the lrows 1 to 10)??
I need to have an auto number in an access query, this is not the auto number already existing in the table. I need a separate auto number field in the query which begins with 1 and is in increasing order. Any help will be much appreciated
I don't know why is it so complicated to add an auto number field in a query. I would like to add a increment number (auto number) on each line and then an auto number on each product.
I'm just looking for a way to add an additional column to a select query that will just be autonumbered down all the way to the bottom of the data. How can I accomplish this?
I made a query that requires to enter two parameters (both are Number data type). I need the 2 parameters to be a criteria in the same row (AND). When I run the query it gives me zero result (and the data is already exists in the table). What is the mistake?