Hi all,
May I know some to construct any functions or query string that can track the no. of records that mean certain criteria in the run time.
Basically I want to track the records in a subform (in datasheet view). Should the no. of records is 0, then I can disallow user from saving it onto the table for better record keeping.
Thanks !!
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
Hi Everyone,
I have a database that I enter time for in the form of military time, I would like to make a query to count the number of entrys in the PM,AM, And NIGHT. For instance if a record has a time of anywhere between 700 or 2299 I would like it to be in the AM catagory, then I would like to total up the number of AM records. Any help would be great. Thanks.
AM=700-1399 PM=1400-2299 NIGHT=2300-699
I'm trying to create a query to show me records for a given year. The issue I'm having is that each record has (4) dates fields and each record can contain null values.Is it possible to do this in a query with data like the example below?
Field 1 ID (1), Field 2 Date (12/22/2012), Field 3 Date (2/06/2013), Field 3 Date (Null), Field 4 Date (Null)
In this example I would want 2013 data but would need to be able to search any year. I could also have dates in all (4) fields
I have a field in Access 2010 called Section Number which generally holds two characters. The characters can be numbers, letters, or a combination. Examples are:
01
X1
KA
40
Sometimes this field holds three characters, such as:
01a
02b
I want to write a query that returns only the Section Numbers that contain two characters. The instances where the field holds three characters are too numerous and changeable to use a parameter that says, for example: not "01a" and not "02b"
Is there a way to write a parameter that means "not Section Numbers of three characters" or "not Section Numbers of more than 2 characters"?
I have an existing query, created using the query wizard which works just fine - however, I would like to modify it to return only instances where there are 3 or more records appearing.
Essentially, its an employee history report for a particular action done by those employees, which returns all records between two dates as specified by the user. What I would like to do is only show those employees who have had more than three instances of this action in the given date period.
I am thinking along the lines of DCount? but how it would be phrased in the query?
First, I am trying to get a query to return records between a certain date range. In the form I have DateFrom and DateTo unbound text boxes from which faculty select the date range. I know I have done this before, but I cant figure out how to create a field name and write the criteria for the source query in design mode!
I tried [Form]![FormName]![DateFrom]<[Form]![FormName]![DateTo] in the criteria but I can't seem to write a valid field name that doesn't alter the criteria in some way...
Second, in the same form, faculty enter the StudentID for the student they wish to get records for. How do I write the code to show a msgbox when there is no such ID in the event they enter an StudentID incorrectly.
I am trying to write a query that will return records from multiple tables. I currently get an error suggesting I create a subquery or else I get far too many records.
The query is EditAttendanceQuery (I left it in a bit of a state). The fields I need are shown in the query. The records I need are based on the Edit AttendanceQuery (Form). I can get the records I need without the CourseNumber and Section, but it all goes downhill when I include them.
I am looking for a query that will return records from a table that have related records in another table. Opposite to the Unmatched Query Wizard.I have two tables: tblSupplier and tblSupplierProducts.The two tables are related by the field "SupplierId".I need the query to only return Suppliers that have Products.
View 3 Replies View RelatedI have a simple UDF that takes a string and returns a variant, which is an array of strings Example Input "Brick Wall" Return value would be a variant array with first element "Brick" and and second element "Wall" Now I have a table with a field of strings, and I want to make a query that returns all the results from the function, one per line.
So if my input table looks like this
[strField]
"kick the ball"
"return the pass"
my query result should looks like this
[Orig] [new]
"kick the ball" "kick"
"kick the ball" "the"
"kick the ball" "ball"
"return the pass" "return"
"return the pass" "the"
"return the pass" "pass"
Last time I had to do something like this I used VBA exclusively, with ADO objects, but I thought a query based solution would be easier.
With my current data the largest return array size my function returns is 27 elements but I wouldn't want to rely on that number being fixed.
I have a query with a Start Time where the need to return a set integer in another field in my query. I am attempting to get this to work in my StripSecondsQry.
I am not getting any error messages and I am not getting any output, When I view this in the Locals window I can see that it should be returning 7, but instead I get nothing unless I change it to
Code:
Function SortStart(StartTime As String) As Integer
then I get zero.
I had this working within the query, but I had to add one more time and then received a message that the expression was too complex.
Code:
Sort_Start: IIf([StartTime]="7:00 AM",1,IIf([StartTime]="8:00 AM",2,IIf([StartTime]="8:45 AM",3,IIf([StartTime]="9:00 AM",4,IIf([StartTime]="9:15 AM",5,IIf([StartTime]="10:00 AM",6,IIf([StartTime]="10:15 AM",7,IIf([StartTime]="10:30 AM",8,IIf([StartTime]="12:00 PM",9,IIf([StartTime]="1:30 PM",10,IIf([StartTime]="1:45 PM",11,IIf([StartTime]="2:00 PM",12,IIf([StartTime]="3:00 PM",13,IIf([StartTime]="4:00 PM",14))))))))))))))
I am trying to write an expression that will result in a date in the format (mm/dd/yyy). I want to display the curent day if it is before 11:00 am based on the system time, and the next day if it is after 11:00 am. Below is the expression that I currently am working with... but it is not working.
IIf(Time()>Hour(11),Date(),DateAdd("d",1,Date()))
Trying to import some data from a linked Excel spreadsheet into a local table. One of the fields is a Date/Time type and is recorded in EST (Eastern Standard Time). I want to keep this field for posterity but also add a separate field with the corresponding time as per BST
For clarity, daylight savings time comes into effect this year on 26th Oct in the UK and 2nd Nov in the US. So generally, there is a 5 hour difference between the two time zones, apart from the period between these two dates, when it is only 4 hours.Here is my query - I am using a SWITCH function to create the BST field
Code:
INSERT INTO tblTransactions
SELECT ltbPayments.ID AS Reference, ltbPayments.VALUEDATE AS ValueDate, ltbPayments.LOCALAMOUNT AS Amount, ltbPayments.USDAMOUNT AS AmountUSD, tblAccounts.AccountID AS AccountID, ltbPayments.TRANSACTIONTIME AS TransactionTimeEST,
SWITCH(DateValue(ltbPayments.TRANSACTIONTIME) < DateSerial(2014,10,26) Or DateValue(ltbPayments.TRANSACTIONTIME) >= DateSerial(2014,11,2),
[code]....
So - how do I explicitly specify the output of the SWITCH function to be in Date/Time format (I presume, by default, it's returning Text, which contradicts the table properties of tblTransactions & the TransactionTimeBST field?...)
I currently have a table with the following fields:
dtmDateintPressintCycleintProgramintLotysnAxialdtmFStartdtmFFinishdtmPStartdtmPFinishdtmDStartdtmDFinish
How might I go about querying the difference between dtmDFinish and dtmFStart for multiple records?
EX:
09/07/05-1-1-1-5681-NO-12:30-1:00-1:30-2:00-2:30-3:00
09/07/05-1-1-1-5681-NO-3:30-4:00-4:30-5:00-5:30-6:00
09/07/05-1-1-1-5681-NO-6:15-6:45-7:30-8:00-10:30-11:00
Would return two results: difference for 3:30-3:00 = 30 minutes and difference for 6:15-6:00 = 15 minutes
Thanks for your help!
I have a basic trouble ticket type database that I built. It records troubles and auto fills the date and time when a new records created. I want a simple query that will display the number of calls that each person has taken today.
The problem being that If I use >Date()-1 I will get calls from this time yesterday until now. Is there a way to round down the time to today only? I don't want to lose my time stamp.
I have a database that is used (partially) to enter appointments during a day. In the appointment column I've entered the date and time as dd-mmm-yyy-hh-nn-ss. I'm now trying to search for appointments entered on a specific day through a user input ([Enter Date] in the query criteria) Problem is, this only returns records where the time hasn't been entered and the time shows as 00:00:00.
I've tried CDate which gives me add/mmm/yyy return. if I try to search against that I get nil returns though. As a test I put DATE() in the criteria but it then says that it's an invalid foremat. I've also tried various machinations of "Like" and "Between" without success.
I have a query that selects usage records from a table where a data field falls within a rolling 12-month period that ends on a month and year selected by the user on a form.
PARAMETERS [Forms]![frmReport]![cboMonth] Short, [Forms]![frmReport]![txtYear] Long;
SELECT UsageID, dtUsage, dblUsage
FROM tblUsage
WHERE (((DateDiff("m",[dtUsage],DateSerial([Forms]![frmReport]![txtYear],[Forms]![frmReport]![cboMonth],1))) Between 0 And 11));
I also have a query that pulls data between two dates that the user specifies using two textboxes on a form.
SELECT UsageID, dtUsage, dblUsage
FROM tblUsage
WHERE (((tblUsage.dtUsage) Between [Forms]![frmReport]![txtStartDate] And [Forms]![frmReport]![txtEndDate]));
On the form I have an Option Group control that sets the visible properties of the 4 controls;
12-Month Rolling
cboMonth - Month Combobox
txtYear - User entered year
Date Range
txtStartDate - User entered Start Date
txtEndDate - User entered End Date
What I was planning on doing was adding two new textboxes (txtQryStart & txtQryEnd) and depending on what option is selected, change the dates accordingly
blnDateRange = (Me.optDate = 1)
blnMonth = (Me.optDate = 2)
If blnDateRange Then
Me.txtQryStart = Me.txtStartDate
Me.txtQryEnd = Me.txtEndDate
End If
If blnMonth Then
If Me.cboMonth = 12 Then
EndMonth = 1
EndYear = Me.txtYear + 1
StartMonth = EndMonth
StartYear = Me.txtYear
Else
EndMonth = Me.cboMonth + 1
EndYear = Me.txtYear
StartMonth = EndMonth + 1
StartYear = Me.txtYear - 1
End If
Me.txtQryStart = DateSerial(StartYear, StartMonth, 1) - 1
Me.txtQryEnd = DateSerial(EndYear, EndMonth, 1)
End If
Now I can use one query to accomplish both types of query;
SELECT UsageID, dtUsage, dblUsage
FROM tblUsage
WHERE (((tblUsage.dtUsage) Between [Forms]![frmReport]![txtQryStart] And [Forms]![frmReport]![txtQryEnd]));
This approach works. It saves me from having to duplicate the queries and some future headache if anything needs to be changed in the queries.
What I was wondering is there an better/simpler way to do this?
:confused:
I have a database called LettersDatabase this databse holds all the letters that have been made including the path to the doc. I use SSN to ID the letters to customers on the Contacts Database.
Contacts database also uses the SSN to id the contacts
I have a form that creates new letters for customers in this form I have listbox that queries the LettersDatabase for all matching records based on the forms contact SSN to see how many letters have been made for that customer.
The problem is that my listbox only shows the first record matching that SSN but there are more records in that LettersDatabase with the same SSN that I need to have diplayed on the listbox as well.
I may be writing the query incorrectly.
Here what I have for the query on the listbox
Like[Forms]![LetterMaker]![txtSSN]
I try adding (&"*") to the end of the query but that does not help.
If anyone out there has the solution to this problem it would be greatly appreciated
Thank you
Hi All,
I am wandering if it possible to check programatically whether a query returns a NULL result?
I am writing a program(VB) that involves an IFF statement where if there are records in the query it does a specific calculation & if there are no records returned in the query it does something else. Is this possible to achieve?
Thanks in advance:D
Cheers,
Karv
Hi.
i.e
I have a query with the following sort of information:-
MonthAmount
08/2007£100
09/2007£200
10/2007 £55
11/2007£60
As today being the 1st October, I would like the query to return the values for Oct and Nov.
The same values would be returned on the 31st Oct, but then the following day, only the Nov value would be returned...so, basically, it only returns the values of the current month and following months..
I am assuming I put something in the criteria of the query under the month? I have tried a number of things, with none working!!!
Thanks for reading....
Frank.
I have a form that using a combo box to select specific record, sometimes we need to see all records, i would like if the combo box if left empty to return all records. I typed this expression but it returns no records when combo box is empty.
IIf([Forms]![FrmReports]![LoanOfficer]="IsNull","*",[Forms]![FrmReports]![LoanOfficer])
If i use this expression i get the wrong results when a Loan Officer ID is enterd;
LIke([Forms]![FrmReports]![LoanOfficer] & *
Example of wrong results, if Loan officer Id is 1, then it returns loan officers 1,11, 111
Thanks in advance for any help
My issue surrounds retrieving the last (based on most recent date) set of records based on the most recent date. I have query, containing 2 tables as the sources for the query results. Currently, the query yields:
Field A Field B Field C
123456 AAAA 1/8/13
123456 BBBBI 1/8/13
123456 CCCC 1/8/13
123456 DDDD 1/8/13
123456 EEEEEE 3/10/13
123456 FFFFFF 3/10/13
123456 GGGG 3/10/13
123456 HHHH 3/28/13
123456 IIII 3/28/13
123456 JJJJ 3/28/13
The desired results would be to return all records with the last/max date, so yield:
123456 HHHH 3/28/13
123456 IIII 3/28/13
123456 JJJJ 3/28/13
I have tried the max & last functions, yet no success.
Not sure if I worded my subject correctly. Here's my problem.. I've used query to combine 2 tables of data..
Here are my fields..
I've assignment_num field, project_num field, project_name field, emplyee_name field.
here are my data..
assignment_num field: 1001, 1002, 1003, 1004, 1005
project_num field: 20,20,15,16,15
employee_name field: tom peter, tom peter, tom peter, julie, sally
What I want is to display the employee name with 2 projects or more...
What i have done?
I've done a group by and then count project_num field.. I also added a condition whereby the countofproject_num > 1.. everything went well except that the countofproject_num display 3 instead 2..
pls help.
I just can't get my head round this one and can't even think of a keyword phrase to search on!
SELECT CompID, CaseRef, ServicesID, Summary
FROM qryAllStats;
In my query I need to return all records where there are more than 3 instances of field 'ServicesID' .
For instance in the recordset ServicesID 47 occurs 5 times while ServicesID 36 occurs 4 times and all other ServicesIDs occur 3 times or fewer.
I would need to return all of the records with ID 47 and 36. Is this do-able?
query to return the most recently created records in a composite key field, and only the most recent ones.
there is a screenshot of the composite key field attached
I want to get te records with the highest InvoiceID, there can be multiple records with the same InvoiceID and I want to get all of them.
Using the screenshot as an example I need to query to return the last two records as they both have the Same, highest InvoiceID.
I've got a database of club members with names, addresses, contact info etc.
I need to send letters by post to those members that I don't have email addresses for. How to create a query to return a list of people whom I don't have email addresses for.
I know how to mail merge the info with the letter I've written in word, how to group people who's email address cell is empty.