I'm somewhat new to access and I'm having a small problem. I have create a web based form via Frontpage 2003 using the access database wizard. In one part of my form I have 6 different options (radio buttons) for a user to select. I want the user to be able to select "multiple options" that apply not just one which is all it is doing right now. How do I change this to allow multiple selection? I opened up my results table and went into the design mode and I can't figure out where to allow multiple selections. Thank you for any help you can provide.
I have a table and a form called patient demo. It displays last name first name and address city state zip. I created another table and form called insurance as radio buttons i have the following self, spouse, child, other. It also displays last name first name address, city, state and zip as text boxes. what i want the radio button to do is when i click self it will copy all information from patient demo to insurance form. I tried to do this several ways but every time i change the information in the insurance form it also changes the patient demo which i dont want it to do because i want to edit that box without changing patient demo. any ideas.
When a control like a check box or radio button is on a form, how can you make the size of the actual control bigger? When changing the size in Properties, it only increases the size of the black border.
I have a database with 1 main form. This form has a bunch of lookup tables that are being displayed in comboboxes on the form.
What I want to do is create another form that has a series of radio buttons that when selected show the specific lookup table which can then be updated/modifyed.
I am unsure where to start. When they select one button I need the table to open "sub form?", "List Box?", and then when they choose another table the first should close and the next open etc. I want all of this to be done within 1 Form.....
I'm trying to build a database of car dealers while using Access 2010. They only sell three types of cars. Once the user select which car dealer they want to look at, I hoping to populate three radio buttons based on values from the database. From what I've read, it seems that the radio button, while using the option group wizard, that the radio buttons are meant to populate a database field, rather than having the database record populate the radio button.
how to do this, so that I am able to show three radio buttons in my form to show which three types of cars this specific car dealer sells?
I have been writing a database for a medical facility. Currently, I have a box to check if a patient in the database is admitted. What I would like to do is create two radio buttons: one to admit and one to discharge.
When the patient is discharged, I want the data in some of the fields on the form(s) to clear, but not all the fields.
I realize the I will need some scripting here.
As an example: the fields for Unit and Room number will clear upon discharge. As well as fields for diagnosis and informed consent signature located on another form within the same table.
I am using an Access database for a foreign language dictionary project.
One of the forms I use is populated by a query (qryLemmaTable) to retrieve information from tblLEMMA.
This form works precisely as I intend it to work, but there is a glitch on it that is driving me mad.
The form in question has an option group with 11 radio buttons that correspond to the parts of speech associated with each word in tblLEMMA.
When I click on the button optAdjective I apply a filter and the only records that are displayed are adjectives. (The same applies for Nouns, Verbs, Prepositions etc.)
Here is the glitch: even though the radio buttons apply the filter correctly, no “black spot” appears in the button. Other signals on the screen let me know what word type is selected, so I can accomplish what I want, but I want the “black spots” too!
Perhaps this will be a clue: For each radio button I use the following code in the GotFocus event. Me.FilterOn = False Me.Filter = "wordtype = 'A'" ‘(or N, etc) Me.FilterOn = True
And this for the Lost Focus event Me.FilterOn = False
Hi i have done this before but can not remeber how i did this.
Basically i am doing a report function where users can choose which type of report they want to print- i am decided to use a radio button function so user have to click on the radio button to enable which report they want to view
(see pic) http://img153.imageshack.us/my.php?image=radiobuttonstu8.jpg
Can some1 help me with the code i need to use so when a user clicks on the radio button one combo box is enabled and the other is disabled
How do you convert a combo box to a radio option? I have made a table called level it has only one column and is only two values (udergrad and grad)
I have a form that sets requirements and in there I have the option to choose what level the requirement is on. Instead of using a combo box for the level (with a select statement SELECT Level.LevelName FROM [Level]; ) I was wonder how I can conver the Level into two radio buttons one for undergrad the other for grad, and depending on what was selected that value would be stored in the table.
How to create a Radio Control Button that selects the records with the artists and names of artists for cd's and print a report based on those autoreport records?
I have a database I use at work for writing up non-conformance reports and we have 5 different dispositions(see picture) but when we run our report, they show up as numbers(1-5). I want to know how to get them to show up as text. I went into the main table and changed the "disposition" category to text and changed each button to show what text I wanted it to but for some reason it wont save. When I go back and click the radio button and bring up the properties, it reverts back to a number. I just want our dispositions to show up as the text(Use As Is, Rework, RTV, etc) instead of numbers when we run our monthly report.
I'm an Access newbie, self-taught. I can make a basic form to input data.
What I'm trying to create is a tool for assessing aquisition of student skills. I want to be able to check that a student knows the name of a letter or the sound of a letter - but have the check recorded as a date in the datasheet.
Is this possible? And, can you explain to me how to do this in language I can understand? I'm not a programmer you see
I would like to store the string in my table when I choose a string from a combobox or radio button in the form.For example, if I choose 'Business' ( from major field in my department table ) in my combobox, I expect there is a 'Business' in my major field in my department table. And if I click radio button labled 'A' (position field), I expect there will be 'A' in the position field in my table. However, those only store numeric values, for example '3' for 'Business' and '1' for 'A' in the table. How can I store the 'real value' in my table instead of number when I choose them.
I'm interested to know how I can select a (1) student and assigns to multiple classes.
Attached I have the database with some tables and forms. Please take a look. I can assign a student to a class, on a specific day but I couldn't figure out how to select multiple classes at once.
i have constructed a switchboard/main menu and have set up buttons which link to forms. i have also made a 'return to main menu' button which does as it says, the only problem is that after going back to thge main menu both forms are now open...any ideas on how to stop this problem
I have been making some custom buttons and noticed that the size of my db went up 360kb after I added two buttons. One button consists of two images and the other button one image. The original file size was 2kb for each image. Is 360kb a normal increase in db size after converting images to buttons? There might be a hefty price to pay, in db size, if I get carried away and add my "up market" buttons to all my forms!
Hi everyone, I am trying to create a button on a form that will export only that record. On the command options I do not see there being an option to do such. Can anyone help? Thanks. I would like to export to excel or anything that will capture what I am looking at. I have noticed that Yes/no boxes do not export to excel?
I have a form that's unbound (Music) with a subform (Arist Info)that is bound. This subform also contains two other Subforms (bound). Their names are (Album Info) and (Song Info). The subform (artist Info) contains some pagebreaks, which I'm trying to use to bring up the two other subforms .The cmd buttons used to control the pagebreaks are located on the main form (Music). My problem is with the third & fourth cmd buttons. I can go back & forth nicely with the first two, and even go the the third. That's were the problem starts. I can't go back to the secound or first from the third or go to the four. The VB code haults and the GoToPage line is highlighted. The code use on the on click event is as followed:
The only thing that changes between all four of the is the page#. I hope someone can help me with this, it's driving me crazy not knowing what i'm doing wrong. If you need to look at a smaple DB there's one on a post called "Problem dealing with macros". I just posted this one a few days ago.
