Random Dropdowns Not Returning Results
Aug 18, 2005
I have built a Project/Resource database for our department, and I am having an issue with 3 computers in the group. First, all of our computers are setup the same (as far as I can tell), however, there are 3 users that have the same issue...when selecting an item from a dropdown, it should populate the dropdown below it with a new list, based on the first dropdown. It is only on certain forms, and only happens on these three computers. If the users log into any other computers, it works fine. I know it's not alot to go on, but does this sound familiar to anyone? I'm at a complete loss!
View Replies
ADVERTISEMENT
Jun 23, 2005
Hi,
I have a query with two table's in them. One is filled, the other is still empty.
Both table's are related to each other with the field "document number".
This was working fine in access 2000, now in 2003 it returns zero results.
I am starting to think it is because one table is empty it returns nothing.
How can i adapt the query criteria or something else that it shows the results from table one, while table two can still be empty.
One table holds the documents and all information about it, the other holds the information wich document is referenced on wich document. Now since i can have documens which don't reference to a document, i still want those in the list.
Anybody any idea?
Thanks
View 1 Replies
View Related
Jul 6, 2007
I have a table listing a number of cell phone products and their carrier along with their status' in the production process. I want the query to return the most recent status for each product for each carrier. However, out of the 20+ products that I'd like the most recent status for for each carrier, it's only returning about 12 products of the most recent status for one carrier.
Any help would be much appreciated! Leave a message if you need more clarification.
Thanks!
View 3 Replies
View Related
May 15, 2007
Item: Access app front end for an SQL database (production tracking/job logging utility)
Problem: The app has a main search page that allows job entries to be located and opened by varies criteria (job#, job name, etc). I can currently run multiple searches on different criteria successfully but if I open a job window(which has been returned as result of my search) and then close that job window to do a new search my search function will no longer return any results(other then “Calculating….”) unless I close out the access app and reload.
Thanks in advance for any ideas that can point me in the right direction to hunt down my bug.
View 1 Replies
View Related
Jul 3, 2006
Hi everyone,
I'm having an issue with a query I created. When run the query requests an Artist Name. I enter this and it returns one result. However in actual table ther are two results for that artist. The only difference is that for the record that doesnt appear the field labelled "Gallery" has a zero value.
I have checked the table and the gallery field is not set to a required field so I dont understand why it wont show it as a result of the query.
Any ideas?
View 3 Replies
View Related
Mar 2, 2007
Hi all:
running access 2000. I have a query that I selected to return the Top 1 record sorted descending on the date so it would pick the most recent entry. I did it by selecting Top 5 from the drop down box in query design mode and then changed the 5 to a 1 using SQL View from qry design.
SELECT TOP 1 Class.CourseID, User.UserName, Class.TrainerID, Class.ClassLocationID, Class.ElapsedTime, Class.ClassDate, Class.Comments
FROM [User] INNER JOIN Class ON User.UserID = Class.UserID
ORDER BY Class.ClassDate DESC;
It still gives me as many records as are entered on the system. How can I get JUST the most recent record entry?
thanks:confused:
View 3 Replies
View Related
Jan 17, 2005
I have built a query that should append to another table. Please see SQL below -
INSERT INTO tblMyBackupContent ( LoginName, Title, Type, Code, [Date Assigned], [Date Started], [Last Accessed], Progress, [Date Completed], [Time Spent (min)], Score, Result )
SELECT tblConentImport.LoginName, tblConentImport.Title, tblConentImport.Type, tblConentImport.Code, tblConentImport.[Date Assigned], tblConentImport.[Date Started], tblConentImport.[Last Accessed], tblConentImport.Progress, tblConentImport.[Date Completed], tblConentImport.[Time Spent (min)], tblConentImport.Score, tblConentImport.Result
FROM tblConentImport
WHERE (((tblConentImport.LoginName)="iderand"));
When I run this query, it shows that 41 records are going to be appended. I click on yes, but when I go into the table to view the appended records they do not show.
Please help me.
View 1 Replies
View Related
Mar 26, 2014
Here is my VBA Dlookup Code:
Code:
Public Sub test()
Dim frm As Form
Set frm = Forms!StationLevelSummary
[code]...
At the bottom im printing the content of the controls which are on my form. These should return 1 number, but for some reason it does not. Ive used this code many times but I cant figure out why nothing is being returned.
View 4 Replies
View Related
Jan 13, 2014
I'm trying to do a string compare between two variables. One string variable is part of an array (which I'm looping through), the other is passed to the function as an argument.the function should return the position of a field in the OrderBy string of a subform.Here's the VBA :
Code:
Private Function SortPosition(strOrderBy As String, strField As String) As StringDim arrSortedFields() As String
Dim i As Long
If Len(strOrderBy) > 0 And InStr(strOrderBy, strField) > 0 Then
arrSortedFields = Split(strOrderBy, ",")
[code]....
The weird thing is, the line in blue returns True when, by watching the variables, it appears that it should not, and returns False when it appears that it should?
arrSortedFields(i) = "[RandomField]"
strField = "RandomField"
arrSortedFields(i) Like "[" & strField & "]*" = False
arrSortedFields(i) = "[SomeFieldName]"
strField = "ADifferentField"
arrSortedFields(i) Like "[" & strField & "]*" = True
I would have thought the expression "[RandomField]" Like "[RandomField]*" should return True?And similarly the expression "[SomeFieldName]" Like "[ADifferentField]*" should return False?Have been using 'Like' for donkey's years and never seen it throw results like this before?
(P.S. The reason I need to use 'Like' rather than a straight = is to account for the possibility that a field may be sorted descending, and therefore to nullify the DESC keyword which may follow any given field...)
View 9 Replies
View Related
Sep 12, 2012
I have a db with 2 tables, one containing basic info FirstName, Surname, YearGroup, and another table with other data. I imported a list of names into the first table, firstname and surname only were imported, other field was left empty, other table was also left empty. I made a simple select query to pull all records from both tables and i get no results at all. None of the imported names show on the query results. what I am missing?
View 2 Replies
View Related
May 4, 2006
I have the following two querydefs. Here is the SQL;
qry1
SELECT [dtFind], tblData.dtReading, tblData.dblValue
FROM tblData
WHERE DateDiff("n",[dtReading],[dtFind]) Between 1 And CInt([intMins]);
qry2
SELECT [dtFind], tblData.dtReading, tblData.dblValue
FROM tblData
WHERE dtReading Between DateAdd("n",-1*[intMins],[dtFind])
And DateAdd("n",-1,[dtFind]);
[dtFind] and [intMins] are parameters.
I use the querydefs is VBA code as such
Dim db As DAO.Database
Dim rstDataSQL as DAO.Recordset
Dim qdfData As DAO.QueryDef
Dim strQdef As String
Set db = CurrentDb()
strQdef = "qry1" ‘or qry2
Set qdfData = db.QueryDefs(strQdef)
‘Set values of parameters
qdfData![dtFind] = dtDate
qdfData![intMins] = intMins
Set rstDataSQL = qdfData.OpenRecordset
qry2 executes significantly faster than qry1, but I am having issues getting the correct results.
If I set [dtFind] = 12/28/2005 10:47:00 AM, both queries work fine. The last returned record has a value for dtReading of 12/28/2005 10:46:00 AM.
However, if I set [dtFind] = 12/28/2005 10:48:00 AM, only qry1 returns the right records. qry2 will not return the record with dtReading = 12/28/2005 10:47:00 AM, but qry1 will.
:mad:
I changed the Between statement to “Between DateAdd("n",-1*[intMins],[dtFind]) And DateAdd("n", 0 ,[dtFind])” to see what happens. As I expected, records where dtReading = 12/28/2005 10:47:00 AM and 12/28/2005 10:48:00 AM are returned.
The data should be in increments of 1 minute, although there are periods where data is missing. None of the dates have values like 12/28/2005 10:47:01 AM, i.e. seconds value is always 0.
I’ve tried adding “PARAMETERS [dtFind] DateTime, [intMins] Short;”, and also using CDate(DateAdd()) without any luck.
Whether I am using the queries using VBA/DAO or user input to set the parameter values, the results are the same.
What am I doing wrong?
:confused:
View 4 Replies
View Related
May 22, 2006
I am using the following:
SELECT CPL_CLIENTS.CODE, CPL_CLIENTS.FULLNAME FROM CPL_CLIENTS
WHERE (((CPL_CLIENTS.FULLNAME) Like "*" & Forms!frmSafeKeep_AddClient_SearchDesig!txtSearchT ext & "*"));
As the control source of a listbox, so that the user can enter something in "txtSearchText", and the listbox will be narrowed to only those those clients that have a matching part of their name.
The problem is that the user enters, for example, "duncan", and the list returns nothing, when in actual fact there are 5 matching records. If the user enters "Duncan" (note the capital letter), they get all 5 records as they should.
If memory serves, access should only be case sensitive if you tell it to be - and this is working fine on other forms.
The only difference between them is the data source. Other forms are getting data from linked tables in the backend. This form is getting it from a linked Oracle table.
View 4 Replies
View Related
Oct 6, 2014
I have a query which pulls up results based on the value of a text box. All works well except one field has a DOB (date) and if I search say for " /1976" I get no results, however search /76 and all the people with that year of birth show then show up. The date is stored in the dd/mm/yyyy format.
I'm using the like [forms]![clients]![searchfield] in the criteria of the query to bring up results.
View 10 Replies
View Related
May 7, 2014
I have two tables Contacts & Allowance. There is a relationship defined between the two based on Contact ID (primary field/contacts - foreign key/allowance). The Contacts table has Firstname + Surname. I have produced a query based on certain fields in both tables however the result is totally pulling incorrect info.
View 11 Replies
View Related
Jul 19, 2006
Hi there,
I'm working on a select query that I have created through the visual query design window in Access 2003, I have multiple criteria but the query is not filtering the results properly.
I'm selecting only records :
where the DeliveryCountry field is within the EU - works
where the ProductID does not contain Repair, Upgrade or Rpr - doesn't work
where the Demo/Sale ID is 2 - works
I've viewed the code in SQL view but I still can't locate the problem, though I suspect it lies in the treatment of ANDs and ORs.
The SQL is pasted below (I have reformatted with indentations so I hope it is easier to read).
One thing to note: the reason the countries list is split in two is because Access did this automatically when I had one long list. Is there a maximum length for WHERE clauses?
Thanks in advance for your help!
Abby
SELECT Orders.ShipDate, Products.[Standard Tarriff Number], [Order Details].[Quantity]*[Order Details].[unitprice]*(1-[discount])*(1-[special discount]) AS [Line Total], [Order Details].Quantity, Orders.OrdDeliveryCountry, Orders.OrderID, [Order Details].ProductID
FROM Products RIGHT JOIN (([Demo/Sale] RIGHT JOIN Orders ON [Demo/Sale].[Demo/SaleID] = Orders.[Demo/SaleID]) LEFT JOIN [Order Details] ON Orders.OrderID = [Order Details].OrderID) ON Products.ProductID = [Order Details].ProductID
WHERE (((Orders.OrdDeliveryCountry)="Austria" Or (Orders.OrdDeliveryCountry)="Belgium" Or (Orders.OrdDeliveryCountry)="Cyprus" Or (Orders.OrdDeliveryCountry)="Czech Republic" Or (Orders.OrdDeliveryCountry)="Denmark" Or (Orders.OrdDeliveryCountry)="Estonia" Or (Orders.OrdDeliveryCountry)="Finland" Or (Orders.OrdDeliveryCountry)="France" Or (Orders.OrdDeliveryCountry)="Germany" Or (Orders.OrdDeliveryCountry)="Greece" Or (Orders.OrdDeliveryCountry)="Hungary" Or (Orders.OrdDeliveryCountry)="Ireland" Or (Orders.OrdDeliveryCountry)="Italy" Or (Orders.OrdDeliveryCountry)="Latvia" Or (Orders.OrdDeliveryCountry)="Lithuania" Or (Orders.OrdDeliveryCountry)="Luxembourg" Or (Orders.OrdDeliveryCountry)="Malta")
AND (([Order Details].ProductID) Not Like "*Upgrade")
AND ((Orders.[Demo/SaleID])=2))
OR (((Orders.OrdDeliveryCountry)="Austria" Or (Orders.OrdDeliveryCountry)="Belgium" Or (Orders.OrdDeliveryCountry)="Cyprus" Or (Orders.OrdDeliveryCountry)="Czech Republic" Or (Orders.OrdDeliveryCountry)="Denmark" Or (Orders.OrdDeliveryCountry)="Estonia" Or (Orders.OrdDeliveryCountry)="Finland" Or (Orders.OrdDeliveryCountry)="France" Or (Orders.OrdDeliveryCountry)="Germany" Or (Orders.OrdDeliveryCountry)="Greece" Or (Orders.OrdDeliveryCountry)="Hungary" Or (Orders.OrdDeliveryCountry)="Ireland" Or (Orders.OrdDeliveryCountry)="Italy" Or (Orders.OrdDeliveryCountry)="Latvia" Or (Orders.OrdDeliveryCountry)="Lithuania" Or (Orders.OrdDeliveryCountry)="Luxembourg" Or (Orders.OrdDeliveryCountry)="Malta")
AND (([Order Details].ProductID) Not Like "*Repair")
AND ((Orders.[Demo/SaleID])=2))
OR (((Orders.OrdDeliveryCountry)="Austria" Or (Orders.OrdDeliveryCountry)="Belgium" Or (Orders.OrdDeliveryCountry)="Cyprus" Or (Orders.OrdDeliveryCountry)="Czech Republic" Or (Orders.OrdDeliveryCountry)="Denmark" Or (Orders.OrdDeliveryCountry)="Estonia" Or (Orders.OrdDeliveryCountry)="Finland" Or (Orders.OrdDeliveryCountry)="France" Or (Orders.OrdDeliveryCountry)="Germany" Or (Orders.OrdDeliveryCountry)="Greece" Or (Orders.OrdDeliveryCountry)="Hungary" Or (Orders.OrdDeliveryCountry)="Ireland" Or (Orders.OrdDeliveryCountry)="Italy" Or (Orders.OrdDeliveryCountry)="Latvia" Or (Orders.OrdDeliveryCountry)="Lithuania" Or (Orders.OrdDeliveryCountry)="Luxembourg" Or (Orders.OrdDeliveryCountry)="Malta")
AND (([Order Details].ProductID) Not Like "*Rpr")
AND ((Orders.[Demo/SaleID])=2))
OR (((Orders.OrdDeliveryCountry)="Holland" Or (Orders.OrdDeliveryCountry)="Poland" Or (Orders.OrdDeliveryCountry)="Portugal" Or (Orders.OrdDeliveryCountry)="Slovakia" Or (Orders.OrdDeliveryCountry)="Slovenia" Or (Orders.OrdDeliveryCountry)="Spain" Or (Orders.OrdDeliveryCountry)="Sweden")
AND (([Order Details].ProductID) Not Like "*Upgrade")
AND ((Orders.[Demo/SaleID])=2))
OR (((Orders.OrdDeliveryCountry)="Holland" Or (Orders.OrdDeliveryCountry)="Poland" Or (Orders.OrdDeliveryCountry)="Portugal" Or (Orders.OrdDeliveryCountry)="Slovakia" Or (Orders.OrdDeliveryCountry)="Slovenia" Or (Orders.OrdDeliveryCountry)="Spain" Or (Orders.OrdDeliveryCountry)="Sweden")
AND (([Order Details].ProductID) Not Like "*Repair")
AND ((Orders.[Demo/SaleID])=2))
OR (((Orders.OrdDeliveryCountry)="Holland" Or (Orders.OrdDeliveryCountry)="Poland" Or (Orders.OrdDeliveryCountry)="Portugal" Or (Orders.OrdDeliveryCountry)="Slovakia" Or (Orders.OrdDeliveryCountry)="Slovenia" Or (Orders.OrdDeliveryCountry)="Spain" Or (Orders.OrdDeliveryCountry)="Sweden")
AND (([Order Details].ProductID) Not Like "*Rpr")
AND ((Orders.[Demo/SaleID])=2))
ORDER BY Orders.ShipDate DESC;
View 5 Replies
View Related
Oct 25, 2013
I have a switchboard which runs a google style search query to find people based on their first name, surname, date of birth or NI number on clicking the search button. It uses the following criteria in the query Like "*" & [Forms]![SearchF]![Firstname] & "*" for each of the above fields.
This works perfectly until someone inputs a record that doesn't have anything in one of the fields. ie, full name and DoB, but no NI number. When a record is entered in this way, the table stores the record but the search query cannot find it.
View 3 Replies
View Related
Oct 30, 2013
What is the best approach to returning calculated results in a query. I have been using nested IIf statements that include DateAdd but I think that I am at a point where there must be a better way.
I want my query to calculate a date based on:
1) A Type field from my table
2) A calculated date based on other query fields.
My query has the following fields:
[Type] [Action 1] [Projected Action 1] [Projected Action 1 Revised] [Action 2]
I want to create a calculated field for [Projected Action 2] that says:
If [Type] is "A" then
if [Action 2] Is NotNull, Null
if [Action 1] is NotNull, [Action 1] + 10 workdays
if [Projected Action 1 Revised] is NotNull, [Projected Action 1 Revised] + 10 workdays
if [Projected Action 1] is NotNull, [Projected Action 1] + 10 workdays
[Code] ....
I would like to keep using nested IIf but I keep running into problems and I thought that there is probably a better way.
View 7 Replies
View Related
Sep 11, 2014
Multi search wont return results: Obviously I have my table and search form. But have hit a problem that is probably simple to overcome, but for the life of me I cant see it.
The small peice of code I have used = forms]![searchF]![name1] I have also tried Like"*" & forms]![searchF]![name1] & "*" still not working. The qurey accompanying form (searchF) works to displaying searchF form unpopulated which I believe is correct. I should at this stage be able to fill out the one table heading (name1) where the query should return a result in the (searchf) form but it does not return.
The tables, forms and quries, have all been saved and closed and re opened many times
The form (searchF) propeties have been checked and double checked. I have even built a test table but the same things happen as my main table.
View 14 Replies
View Related
Dec 30, 2014
I am building a prototype database and currently has two records in it (I know for certain they are not duplicates). Attached is the relationship and below is the query. The query keeps returning the correct results but twice. (Duplicate results.)
SELECT DISTINCT WeekdayName([Weekdaynumber],False,1) AS Weekday, [Master Data].Date,
[Master Data].Machine, [Master Data].Shift, [Master Data Query].[Master Data_Product Code],
[Master Data Query].[Cases/Pallet], [Master Data].[Expected Pallets to Produce],
[Master Data].[Actual Pallets Produced], [Master Data].[Damage (Units)],
[Code] .....
View 6 Replies
View Related
Jun 11, 2014
I have an unbound combo box that I set up in a form using the combo box wizard in Access 2010. I selected the option that says, "Find a record on my form based on the value I selected in my combo box." The problem is that the combo box will not always display the correct record. It seems to only display the first record of a group of similarly named records in a table.
Example:
Code:
Last Name First Name SSN
Smith Alex 123-45-6789
Smith Jane 234-56-7891
Smith Mary 345-67-8910
If I select Smith Jane, the record for Smith Alex will display. I know that this has something to do with the bound column property, but I am unsure what to do to fix the issue.
What I have tried: I tried setting the primary key as the first field, but then I could only search by the primary key, which is unrealistic for this database. Users will be searching based on last name. How do I make the combo box select whichever record I select from the drop down list?
View 4 Replies
View Related
Jul 31, 2013
I have a parameter query that contains information on a list of people and contains 3 checkboxes: alumni, parent, business
In this query, I am trying to use parameters to filter the results based on these three fields i.e.
true, false, true would return all records where either alumni, business or both are true, and parent can be either true or false.
false, true, false would return all records where only parent is true, and the other fields do not matter.
View 2 Replies
View Related
Jun 25, 2007
I have a subform within a main from which switches by entry. The subform is a datasheet. I have two dropdowns in the datasheet and I want to limit one off of the other. I keep getting a prompt. The prompt is Forms!CLTS Subform!Environment. To my understanding it looks like it can't find Environment. Does anyone know the proper format.
This is my code for the second drop down in the subform.
Also special note Environment is what I am referencing to and it also is in the subform.
Code:SELECT PackageName.PackageNameID, PackageName.PackageName, PackageName.EnvironmentIDFROM PackageNameWHERE (((PackageName.EnvironmentID)=[Forms]![CLTS Subform]![Environment]))ORDER BY PackageName.PackageName;
View 1 Replies
View Related
May 18, 2006
Hi all, I haven't worked on Access in a couple of years, so VERY rusty.
I have to make a database for the mechanics, the equipment (inhouse stuff only), and all of the workorders done by them. That part is done already and I think its working properly. The next step is where I'm a little lost.
I now need to make 3-4 reports that will be run off of queries to get "Work Performed on Equipment X", "Work Performed by Mechanic X", and "Work Performed in Month X / Year X".
The people that would be accessing this information aren't the most computer literate, so I need to make it as simple as possible, especially since I'll be leaving the company within a year (I should be graduating within that timeframe).
I'm not sure if I should do a single query that can pull multiple information with dropdowns for Mechanics, Equipment, Month and Year (With each having the option of a single selection or ALL). This way, the user can pick and choose the info they need.
The other option would be using the switchboard, have a button to do each type of inquiry, then using a subform (similar to what OneRedTL4 made for iibobii and his movie database), but would still need 2 dropdowns for the by date inquiry (one for Month and one for Year (up to say 2012)).
I guess I'll stop here and wait to see what other information may be required from you folks or ideas to start with. I have to work on this in between my regular work, so unfortunately I may not be doing this with the greatest of haste.
View 3 Replies
View Related
Mar 13, 2008
created a form with several Drop downs, S/N, Location, Manufacturer, Model, Model Number, and Owner.
All the drop downs are based off of forms, i queried the main inventory to have this info and a couple peaces of information. applied the relationships.
If i try to make a macro filtering the conditions, if i leave any of the fields blank nothing comes up in the search.
is there a VB code that i can use that wont include "null" fields or will this not work with 6 different filters applied all in one macro.
furthermore after the search i want the ability to print the search results using a report design.
is this possible?
View 2 Replies
View Related
Dec 29, 2006
Greetings,
I've been banging my head on this for days, and what really makes this difficult is the number of websites which say it should work just fine!
I'm working with Access 2003 and trying to make use of the IIf function. I have given my fields generic names in the examples below.
I have a number of items I want to search upon in my search form. Each item has a check box and a combo box. I want the query to look at the check box. If the box is checked, I want the query to use the value in the combo box. If the check box is UN checked, I want the query to ignore this field and return all values. I thought this was simple, until I tried to do it!
Here is my code, placed in the Field-name criteria box of the query:
IIf([Forms]![form-name]![checkbox-name]=True,[Forms]![form-name]![combobox-name])
Now I know that the function works, because I can manually add a value:
IIf([Forms]![form-name]![checkbox-name]=True,[Forms]![form-name]![combobox-name],2)
This will return all records where Field-name = 2.
So... my original code should work! Because no "false" condition is stated, the query should be blank, and should return all records. But it doesn't! Truly maddening.
Here are some attempts which did not work:
IIf([Forms]![form-name]![checkbox-name]=True,[Forms]![form-name]![combobox-name],>0)
---> The ">0" caused an error. In fact, I can only specify an integer - all else, including things with operators, do not work.
Working with nulls - it does not seem to recognize an unchecked box as a null.
That's the short version of the story - any and all ideas welcome!
Regards,
-- Mark
View 14 Replies
View Related
Nov 14, 2007
I am trying to filter a form to show the entire weekend's activity on Monday but only yesterday's activity Tuesday through Friday. Using this code I can return Friday's results on Monday and yesterday's for the rest. How do I get the range Friday to Sunday?
IIf(DatePart("w",Now())=2,Date()-3,Date()-1)
Using >Date()-3 doesn't work.
Thanks
Bruce
View 5 Replies
View Related
