Hey all, I was wondering if anyone might know how to obtain a reocrd count, I need to create a PERMIT number based on the number of records in my table. So I need the number of records in my table plus 1, which will then give me half of my permit number, I will then add the 2 last digits of the current year and add a "-" I think I have the date done, but I dont know how to obtain the number of records in my table? Can anyone help? Thanks
View RepliesI have a table that has 5M+ accounting line entries. Below is an example of one accounting journal in the table.
BUSN_UNIT_IJRNL_DJRNL_ICNCY_CMONY_A
CB0014/07/20140002888269323AUD16797
CB0014/07/20140002888269323AUD-16797
CB0017/07/20140002888269323AUD16797
CB0017/07/20140002888269323AUD-16797
The journal ID above was an accounting entry, debit $16,797 and credit $-16,797. because it was entered as a reversing journal in the system, the table has captured the Journal ID with 2 dates. For my purpose i only want the one date (MIN) date, the total amount of the journal (either the debit or credit amount 16,797) and the total number of lines the journal ID has so in this instance I want the count to be 2 and not 4.
Right now this is what i get
BUSN_UNIT_I JRNL_I CNCY_C SumOfMONY_A CountOfJRNL_I MinOfJRNL_D
CB001 0002888269 AUD 0 4 4/07/2014
This is the output i would like
BUSN_UNIT_I JRNL_I CNCY_C SumofMONY_A CountofJRNL_I MinOfJRNL_D
CB0010002888269323 AUD16797 2 4/07/2014
Im thinking with the total sum because theres debits and credits is there a way to do the absolute value of the journal MONY_A then divide by 2?
current SQL
SELECT [One Year Data Lines].JRNL_I, [One Year Data Lines].CNCY_C, Count([One Year Data Lines].JRNL_I) AS CountOfJRNL_I, Min([One Year Data Lines].JRNL_D) AS MinOfJRNL_D, [One Year Data Lines].BUSN_UNIT_I, Sum([One Year Data Lines].MONY_A) AS SumOfMONY_A
FROM [One Year Data Lines]
GROUP BY [One Year Data Lines].JRNL_I, [One Year Data Lines].CNCY_C, [One Year Data Lines].BUSN_UNIT_I
HAVING ((([One Year Data Lines].JRNL_I)="0002888269") AND (([One Year Data Lines].CNCY_C)="aud"));
I can use the following to return the last record count of the subform records, but I want the last record count of the VISIBLE records only.
So if records 1-15 are visible then it returns 15
If records 34-49 are visible then it returns 49
Code:
RecordsetClone.recordcount
:mad: I have created a database to hold information on non conformances we have with our suppliers, I am really stuck, what I am looking for is to put a field into a table which counts issues with the different suppliers, if anyone can help it would be much appreciated! Thanks
View 1 Replies View RelatedI'm building a health data system that stores data from health tests as follows:
[test01], [test02], [test03],.........[test25], etc etc.
Each of these tests comprised of a "Pass"/"Fail" value.
Now, i'm building my queries for a feedback report to hand over to the client that is based solely on the 1 single client record. In other words the queries are designed to return only 1 single data record to be placed in the client report where the based on the corresponding [TestID].
So within this 1 data record i want a query to count the number of times "Pass" appears in the test fields?
ie count([test01] [test02] [test03] [etc] [etc], ="Pass")
As there are some 40-50 [test##] fields in this one test battery i don'y particularly want to go back and code an IIf statement for each component if i can help it.
Many thanks in advance for any tips.
I have a query that updates 1 field in tableA which is the sum of values from 3 other related tables. However, when 1 of the 3 tables has a record count of 0 then the query does not work??? How can I update tableA excluding tables with record count <1 ?
Thanks.
I am working through a lot of data and this is basically what I'm trying to do.
Let's say we have billed occurances for ABC Pet Store. What I need to do, is to see how many "billed lines" appear in the data. So if there are 3 billing occurances (let's say bill amount greater than zero) - in the data I want the query to populate a "billing occurances" field with "3."
How would I do this?
Cant find what I am looking for on the forum so if anyone can help me or tell me what to search for that would be great...
I need one of my forms to display a running total of updated records, but only those records that the user clicks a command button on. i.e if i have a recordset of n records each time I move to the next one (by clicking a command button) I want the control on the form to display the count of those records that have been updated only.
I am assuming I would need to add some code to the after update event of the form or on click event of the command button but cant really figure out what code to write.
Any pointers?
In have a table which contains customer address details.
I simply want to display a 2-column list. the first column
to display a disnct list of city's from the main table.
the corresponding column must give the no. of records that
contain the entry in the first column.
eg if the main table had 5 customers that lived in london
and 6 in Maidstone then
London 5
Maidstone 6
etc
I have two tables - one contains customer names, the other customer appointments. So one customer - many appointments.
Each appointment is booked at a set interval (every 3 weeks, 4 weeks, 5 weeks...) which can vary from one appointment to another.
I want to do a count, in a query, to show in a report.
I need to count:
Total Cus_ID by interval - so how many customers are booked every 2 weeks, every 3 weeks, etc.
I need the count to be based on the customer's LAST appointment only.
I have tried, select query (group), crosstab (!)... querying a query... Total line using Max... then Last...
Nothing I tried works. The sum of appointments by interval should equal the total number of clients in the database... It gives me 4 times that... so it is counting every appointment, not just the last appointment entered.
I also will be including two other fields: activecustomer = yes and source = Eve - need to know criteria to set.
Does anyone have a good technique for enforcing a minimum number of records in a table?
I am attempting to ensure that in a table of Roles, there be a minimum of two Roles defined as Technicians. The field which identifies a Role as Technician is a Boolean.
I wrote a Function which does a domain lookup to count the number of Roles defined as Technician and am calling it from the BeforeUpdate event.
However, if there are 2 Technician Roles, and I mark a third Role as Technician, change my mind and try to unmark it...of course the Function can still see just the 2 existing.
I realize I can Undo the edit, but a user may not.
Thanks for any help.
Hey Guys,
I’ve attached a zipped example of the problem I am having with customised navigation buttons.
In my main database the form “subfrmPersonsContact” works perfectly. I have exported it to a new database and now the customised record count fields do not work at all – they are in fact blank even though the navigation buttons do still work.
The code running the form and the record count fields is listed below – I have no idea why it’s not working.
Any help would be greatly appreciated.
Cheers,
Rusty
:D
Private Sub Form_Current()
On Error GoTo err_Form_Current
Dim rs As Recordset
Dim Count As Integer, Position As Integer
Set rs = Me.RecordsetClone
rs.MoveLast
rs.MoveFirst
Count = rs.RecordCount
Me!txtRecCnt = "of " & Count
Position = Me.CurrentRecord
Me!txtRecPos = Position
If Position = 1 Then
Me!gotoPrevious.Enabled = False
Me!gotoFirst.Enabled = False
Else
Me!gotoPrevious.Enabled = True
Me!gotoFirst.Enabled = True
End If
If Position = Count Then
Me!gotoNext.Enabled = False
Me!gotoLast.Enabled = False
Me!txtRecCnt = "of " & Position
Else
Me!gotoNext.Enabled = True
Me!gotoLast.Enabled = True
Me!txtRecCnt = "of " & Count
End If
rs.Close
exit_Form_Current:
Exit Sub
err_Form_Current:
If Err.Number = 3021 Then
Resume Next
Else
Resume exit_Form_Current
End If
End Sub
Guys
I've searched the database and found similar problems but don't understand the replies (mainly DCount()).
I have a control form where a user can search the database by entering information. The form asks them to type some text that will appear in a description field, and match any records with the same text.
However, when the user types the text and clicks the button to open the form (which is linked to a query searching the description field), I want a message box to say no records found before opening the form. Mainly because when it doesn't find a matching record, the form opens with a new autonumber.
I either want a matching record to appear, or a dialog box saying no matching records found and the form not opening therefore not creating a number that is not used.
I tried in the command button entering if recordcount>0 then openform but it doesn't like the else statement or doing a if recordcount=0 underneath.
Any ideas?
I've only recently gotten to know about continuous forms and their use a bit. So for example, I used a maximum number of pre-defined (6) visits. I need to change that still, but during the development of the sales forms I already ran into a problem.
At first I was planning to have a certain maximum number of items to have on a form and create an invoice from that. But of course that would limit the number of items on one invoice which isn't good. So, now I have a continous form which adds a line containing productname, price, nr of that item etc. anytime needed.
In the previous design idea it would have been easy to calculate the total amount of money at the end of the list since the list was predefined. So I could just say invoiceamount = itemID1amount + itemID2amount + itemID3amout etc.
With the "new" design however that is impossible to do since the number of objects is unknown. So how do I create a piece of code which does that? In the continous form I have a SaleID which keeps track of which items belong to a certain Sale and a TotalItemsID autonumber which keeps track of the number of lines (items) which belong to that specific Sale.
So I need to count the total number of TotalItemsID's within a certain SaleID and then have a piece of code which creates a sum of that counted list of items.
I'm new at this, I've found the function Dcount() should be used to accomplish this, but the rest, as of yet, remains a mistery to me.
How to do this?
I have a Report Generated on Access Database, the report is 56 page now i'm tring to put the total records on that report, how do i do that ??? pls help
View 1 Replies View RelatedI need to be able to count the number of records in a report table in order to perform a calculation. For example record count/ total.
Thanks
1) If I check recordcount without move rst to last position I get wrong number of recordcount.
Code:
rst = CurrentDb.OpenRecordset(strSQL)
msgbox nz(rst.RecordCount, 0)
2) If I move rst to last position, number of recordcount is correct, but! If there's no record in my string I get an error that rst can't move to last position.
Code:
rst = CurrentDb.OpenRecordset(strSQL)
rst.MoveLast
msgbox nz(rst.RecordCount, 0)
how to check correctly RecordCount even if my query in string has no record?
1) If I check recordcount without move rst to last position I get wrong number of recordcount.
Code:
rst = CurrentDb.OpenRecordset(strSQL)
msgbox nz(rst.RecordCount, 0)
2) If I move rst to last position, number of recordcount is correct, but! If there's no record in my string I get an error that rst can't move to last position
Code:
rst = CurrentDb.OpenRecordset(strSQL)
rst.MoveLast
msgbox nz(rst.RecordCount, 0)
So the question is, how to check correctly RecordCount even if my query in string has no record?
The filter output from a recordset in the following code is 1. But this is incorrect: How can this be corrected?
Private Sub Command43_Click()
Dim curDatabase As Database
Set curDatabase = CurrentDb
Dim rs3 As Recordset
Dim t As Recordset
Set rs3 = curDatabase.OpenRecordset("Select * from [Courses under Programs]")
rs3.Filter = "ProgramCode = 'ANS.CT'"
Set t = rs3.OpenRecordset
t.MoveLast
t.MoveFirst
MsgBox t.OpenRecordset.RecordCount
End Sub
In my access database I am using a form and at times a record may need to be updated multiple times. Is there a way to track and count how many times a record has been modified? I already track the last modified date and time.I searched and was not able to locate what I am trying to do, and maybe my search term was not exactly correct.
View 6 Replies View RelatedWhat I would like to do is have a field in a given record increment itself every time that record is selected. For example, say you have a table that stores items in the inventory: each item has a times_search_for_field.
Now, lets say a user runs a search which results in the following SQL:
SELECT * FROM Inventory WHERE experation_date=Today();
Now I want to have every record returned by that SQL statement increment it's times_search_for_field incremented by one. I'm just looking for the most efficiant way to do this.
I know I chould just have my asp .net code loop through the results and call an SQL UPDATE statement for each record, but it seems there should be a more efficient way of doing this.
Mike.
I have a parent form containing a subform (Datasheet view). The parent form also has a button that I only want enabled when there are records showing in the subform.
Were the records contained in a listbox (as opposed to a subform) - I could simply check the recordcount property but short of running SQL to count the number of records in the underlying table - how can I do this?
Any ideas please?
I havent used Access for sometime so please bear with me.
I have a text box called txt18 on a subform which is used to display the total no of records within subfrmPSR. I have used =Count() in the control source.
My 2nd text field called txt17 (unbound) I would like it to count as users use the move next and previous buttom to navigate thru the record. As they move through the records I would like txt17 field to count from the first record to the current record in the set.
I imagine that a piece of code will need to go in OnCurrent of the subform referring to txt17.
I.e
txt17 txt18
2 of 6
txt17 will be the only field that changes.
Any help would be appreciated.
How do I check, before opening the form, whether any records exist in the table bound to the form?
Thanks
I have a fairly simple query to weed out all the records in our database that are missing vital pieces of infomation :
Code:
SELECT Contacts.Name, Contacts.Address1, Contacts.Address2, Contacts.Town, Contacts.County, Contacts.Country, Contacts.PostCode, Contacts.Telephone, Contacts.Code
FROM Contacts
WHERE (((Contacts.Address1) Is Null) OR ((Contacts.Address2) Is Null) OR ((Contacts.Town) Is Null) OR ((Contacts.County) Is Null));
Is there anyway to count how many fields are missing for each record ?
I have a form that contains a number of tabs, each tab then contains a subform. The basic gist is that there are clients and each client chart needs to be audited to make sure that the every clients chart has all of the correct information in it. So if for example, each client needs an initial treatment plan, there would be a tab called Initial Treatment Plan that would contain a subform (continuous form) displaying all of the clients that are missing this information.
I would like to display the number of records that are being displayed in each subform in the tab next to the name to make it easier for the auditor to know how many which tabs have content to be updated. For example, if there are 10 clients that are missing their initial treatment plan, the tab would read "Initial Treatment Plan (10)".
I was able to get a total number of rows in datasheet view, but I don't know if there is a way to have that field as a hidden field in continuous form view that can have its value displayed in the tab.