Record Saving Woes
Mar 16, 2006
Ok, here is my scenario.
I have several FE's each saving in their own BE. They are all the same but for different areas of our business. Each has around 20-30 users. I recently introduced another form into the FE that has linked tables to another different BE in another folder. Each FE out there with its own BE now has this form and all of the new forms save to the same (one) BE. Ok, got it?
Now, sure its possible to have them all together and I would anticipate someone suggesting this. Its split up to keep sizes down and performance up among other reasons.
In any event, here I am. All of the new form introductions went smoothly without a hitch. The last one however is causing trouble. On submit an e-mail is sent, the user is asked if they want to submit another form, and if yes a new record is created. If no the form is closed.
E-mails are always sent, no problem. The trouble is saving the record. All except one of the different FE's I have out there in different folders save the record into the table just fine. There is one though that does not do this. The mail is sent and the program behaves normally with no errors but the record is not saved. This does not happen to all users of this FE either. There are some users that work fine and the record is saved in the BE yet other users do not save the record. You can see the .ldb appear and disappear. Our IT dept has been through the permissions time and time again and tell me they are ok. The FE and main BE are in one folder while the BE that the new form talks to is in its own folder. Remember, this works fine for several other instances, its just the one that doesn’t save the record.
I did have a chance to see the permissions the other day and it seems a mess to me. They have users in individually, as they were set up initially and the same users are also in there in a group and maybe 2 groups. The permissions look a mess to me… they really do…. but that doesn’t necessarily mean they would not work and can be blamed. I have no control over this part and it drives me nuts!
What I have done...... copied a working FE from another area into the troubled folder. No good. I have removed the new form along with its linked tables and the record is saved. Put the form and linked tables back in and it stops saving again. The code compiles just fine. I have done compact and repairs.
Any thoughts or ideas out there??? If you need more info ask. I understand what I wrote but you might not LOL
View Replies
ADVERTISEMENT
Jan 17, 2014
I have a subform with records of call details (date, time, subject) - the date and time are autogenerated and subject is a text field. After entering text in the subject field and then clicking on the close button in the main form, or clicking anywhere else in the main form, the record is saved to the table. However, if I enter text in the subject field and then move up to view previous records (within the subform) and then click the close button in the main form the record is not saved in the table. How can I either save the record before allowing the user to move to another record within the subform or before exiting the subform set the focus to the new record so that it will be saved on exit?
View 4 Replies
View Related
Apr 5, 2006
Hello guys
I have one small quick question. How can get blank or new record after saving
Cheers
View 3 Replies
View Related
Nov 23, 2006
Iam very new to ACCESS. So please do forgive me for
believing that the "SAVE AS" function in ACCESS is as easy as
something similar we do in Microsoft Word.
After searching this forum and others I realise that there is no easy way
and it is considered as some thing for serious users.
(with additional coding not available in ACCESS)
Perhaps there are easier ways that I am not aware of.
I would like to open a record in a FORM which has one Combo Box
for text data, several text and Numeric fields.
I then need to change a few items and save the record as a New
Record
Only a few (mostly numeric fields) and some date entries will be changed
as well as a couple of calculated fields in the NEW RECORD.
I shall appreciate any suggestion as to how to do this.
View 13 Replies
View Related
Jun 26, 2006
I'm terribly sorry to bother on what seems like a very simple matter, but I've just given up on MicroSofts documentation.
I just want to execute the Shift+enter type of save-record command (also available from the "Records" menu at the top) when a field loses focus. This would need to be part of my VB code as I'm doing other things on this event as well.
Any help is greatly appreciated.
View 1 Replies
View Related
Feb 23, 2005
Hello,
I have a form and I have a button so people can open records to load into the form. The problem is that whenever they close the form it updates the information in the table. How do I stop that from happening?
I want the information in the table to update only when they hit the button I made (which works).
And how do I stop it from loading the record when I open the form, or maybe I can specify to load a blank record instead, how do I do that?
Thanks in advance!
View 1 Replies
View Related
Feb 22, 2006
Hi,
This should be an easy one...I would like to save a record part-way while filling out a form. I know this can be accomplished by pressing Shift+Enter, but does anyone know the vb code for saving a record while working on a form?
Thanks.
View 1 Replies
View Related
Apr 13, 2006
hola,
does anyone know the code to save a report with a changing file name?
here are the details.
i have a reoprt that changes weekly. i want to save a weekly file with the end result to be called "Downtime Cost Report #/##/##", where the date is pulled in from a qry called "qry_Actual_Costs_Thru" and field name [Fiscal Week].
i know it is something like:
DoCmd.Save acReport, "Downtime Cost Report"
Thanks
T
View 4 Replies
View Related
Dec 9, 2012
Please find attached table
When saving a record first one is blank row how to solve. For the first time only it happened why? How to solve.
View 6 Replies
View Related
Dec 28, 2011
i want to have message box asking "Want to save the record or not" to save the record.
form contain the subform also. i read some thread regarding that issue they suggest i have to use form's beforeupdate property. i used it for the main form but message box is appearing before entering the values in subform. i mean i have to enter some data in subform also.
i am attaching database for ur references. after entering PO nunber PO date and selecting client message box is apearing but it should be come after updating data in subform i.e. details.
View 5 Replies
View Related
May 25, 2007
Hi
I need to know how to stop access from saving the record when the
subform query is on focus?
Thanks
View 5 Replies
View Related
Jun 14, 2005
Hi all,
I've got this form working ok but need to add some extra functionality but haven't a clue how to do it!
http://www.access-programmers.co.uk/forums/attachment.php?attachmentid=10175
The uploaded database has two main forms. The first is used to enter customer data, the second runs from a query and shows all those records that have been completed in the first form (frmCustInfo - AgentLog = Yes) but not completed in the second form (frmControlsSource - AnalystLog = No)
Then more data is input into one of the subforms (frmControlChecks). Now in order for me to see the results of the queries connected to two other subforms I have to move off the record and back to it (for the record to be saved and then the queries run)
After moving back to the record, the query results on the right (Information Only) are manually added to the last subform 'Input Two', then the user would move on to the next record and do the same.
-------------------------------------------------------------------------------------------------------------
What I need it to do then is this: When the user tabs off the last field in the subform (frmControlChecks), the queries to the right (two subforms) would run, showing the results and also populating the last subform (frmAnalystInput)
The user would then click AnalystLog and move to the next record.
I hope this is possible without redoing the forms/queries because it's taken ages to get this far
I've also added info in this sample database and some working data if you want to take a look...thanks for any help
View 1 Replies
View Related
Sep 5, 2005
Good morning all! I've got three bound combos set to visible = false on their property sheetsThese will remain hidden or will be revealed depending on the selection made in another bound combo cmbType.
The select case below works fine on the form but the selection affects all records not just the current record. Open record 1 and select "compliment" from the first combo - the three others correctly stay hidden. Move to record 2 and select complaint and the combos appear - Great! Move back to record 1 and they're showing there as well. Groan. Helllllppp!
Private Sub cmbType_AfterUpdate()
On Error Resume Next
Select Case cmbType.Value
Case "Complaint"
cmb2Day.Visible = True
cmb15Day.Visible = True
cmbOver15.Visible = True
Case "Compliment"
cmb2Day.Visible = False
cmb15Day.Visible = False
cmbOver15.Visible = False
Case "Suggestion"
cmb2Day.Visible = False
cmb15Day.Visible = False
cmbOver15.Visible = False
End Select
End Sub
View 1 Replies
View Related
Mar 13, 2006
I want to save a record with a command button. I am using RunCommand acCmdSaveRecord. Access gives me a prompt saying "You are about to update 1 record. Are you sure you want to update this record?"
How do I get it to stop prompting me every time?
View 1 Replies
View Related
May 15, 2006
I'm posting this question to Forms forum because I'm sure I can't do this with a report--though a report is really what I need to be using.
My database has buttons on the forms to preview a "page printout" report based on the data in the record displayed. The reports - formatted to closely resemble printed questionnaires provided by the client - are based on queries, run with criteria conditions to match the record on the screen. So, to run the report, you have to have queriable data -- i.e. the data shown in the form has to have been saved to table. So the print preview buttons include a Save command.
The client would like to be able to view the printout of a potential new (or changed) record without saving. (There is an audit trail that tracks changes and deletions once a record has been saved.) The only way I can think of that this might be done would be to print directly off of the form--which would produce un-pretty results at best, I'm afraid, and seems like a headache to set up. But would it even work? Using the file menu to preview printout of a form seems to save the record.
So, my questions:
1. Is there something I'm missing such that I could run the reports without saving the data?
2. If I DID print out the form instead of the report, can even THAT be done without saving the record? (They would only need to preview without saving, not actually print.)
View 3 Replies
View Related
Jun 19, 2014
I have a field on a form [vin] that is based on a table, except i changed control source to a Dlookup to pull the vin number in from another table so i wont have to type it when i enter the record. However, this field is not saving when i save the record. I cannot just make a relationship because we reuse the same vehicle numbers, when we sell van 1 with vin 123, and replace it with a new van with Vin 456, we still call it van 1, so the unique vin is the only way to distinguish the two.
View 3 Replies
View Related
May 22, 2012
I have to save the hyperlink of the copied file into a record of my database.
Private Sub Knop29_Click()
Pad = "C:"
Dim Bestandslocatie As String
Bestandslocatie = DLookup("[Waarde]", "tblInstellingen", "[Tag] = 'Locatie'")
With Application.FileDialog(3)
.Title = "Bestand selecteren"
[Code] .....
The column where the hyperlink of the copied file has to come is "data".
As you can read the code i tried to do it this way: Me.Data.Value = NewName, but then i only get this pad saved into my database:
hns019afdelingafd_tdHasseltOpslag documentatie TDMaxihalKranenKraan24TraverseSoftware
So i need to find a way to past the file name after this link so that it becomes something like this:
hns019afdelingafd_tdHasseltOpslag documentatie TDMaxihalKranenKraan24TraverseSoftwareFile.exe
View 1 Replies
View Related
Apr 20, 2005
The database for workers works ok from a solitary table, tblEmployees.
I want to make it a relational db.
I’ve incorporated lookup tables. But I’m lost about what to do next – and if it should be divided further.
I’ve studied many tutorials in relationships, but I don’t find one that resembles this one.
Could a relationship expert give advice please? I've included a sample, hoping this will be simplest way for you to understand the challenge.
View 14 Replies
View Related
Sep 25, 2007
so, I have created a working SQL statement that summarises data from a bunch of different tables (it's a stock monitoring application so it all has to do with levels of stock, numbers of parts processed etc...):
SELECT tblPPIn.BatchID,
tblPartDescriptions.DrawingNumber AS [Drawing Number],
tblOrder.IssueNumber AS [Issue Number],
tblPartDescriptions.Description AS [Description],
tblPPIn.Qty AS [Total Booked In],
IIf(IsNull((SELECT Sum(tblPPProcessed.QtyProcessed) AS SumOfQtyProcessed FROM tblPPProcessed WHERE tblPPProcessed.BatchID = tblPPIn.BatchID;)),'0',(SELECT Sum(tblPPProcessed.QtyProcessed) AS SumOfQtyProcessed FROM tblPPProcessed WHERE tblPPProcessed.BatchID = tblPPIn.BatchID;)) AS [Total Qty Processed],
IIf(IsNull((SELECT Sum(tblPPOut.Qty) As sumofQtyOutPass FROM tblPPOut WHERE tblPPOut.BatchID = tblPPIn.BatchID AND tblPPOut.IQCPass = 'PASS';)),'0',(SELECT Sum(tblPPOut.Qty) As sumofQtyOutPass FROM tblPPOut WHERE tblPPOut.BatchID = tblPPIn.BatchID AND tblPPOut.IQCPass = 'PASS';)) AS [Total Good Parts Taken],
IIf(IsNull((SELECT Sum(tblPPOut.Qty) As sumofQtyOutUninspected FROM tblPPOut WHERE tblPPOut.BatchID = tblPPIn.BatchID AND tblPPOut.IQCPass = 'UNINSPECTED';)),'0',(SELECT Sum(tblPPOut.Qty) As sumofQtyOutUninspected FROM tblPPOut WHERE tblPPOut.BatchID = tblPPIn.BatchID AND tblPPOut.IQCPass = 'UNINSPECTED';)) AS [Total Uninspected Parts Taken],
IIf(IsNull((SELECT Sum(tblPPProcessed.QtyPass) AS SumOfQtyPass FROM tblPPProcessed WHERE tblPPProcessed.BatchID = tblPPIn.BatchID;)),'0',(SELECT Sum(tblPPProcessed.QtyPass) AS SumOfQtyPass FROM tblPPProcessed WHERE tblPPProcessed.BatchID = tblPPIn.BatchID;)) AS [Total Passes],
IIf(IsNull((SELECT Sum(tblPPProcessed.QtyFailEtching) + Sum(tblPPProcessed.QtyFailCutOut) + Sum(tblPPProcessed.QtyFailFlatness) + Sum(tblPPProcessed.QtyFailHandling) + Sum(tblPPProcessed.QtyFailOther) AS SumofFails FROM tblPPProcessed WHERE tblPPProcessed.BatchID = tblPPIn.BatchID;)),'0',((SELECT Sum(tblPPProcessed.QtyFailEtching) + Sum(tblPPProcessed.QtyFailCutOut) + Sum(tblPPProcessed.QtyFailFlatness) + Sum(tblPPProcessed.QtyFailHandling) + Sum(tblPPProcessed.QtyFailOther) AS SumofFails FROM tblPPProcessed WHERE tblPPProcessed.BatchID = tblPPIn.BatchID;))) AS [Total Fails],
[Total Booked In]-[Total Qty Processed]-[Total Uninspected Parts Taken] AS [Total Unprocessed Parts Remaining],
[Total Passes]-[Total Good Parts Taken] AS [Total Good Parts Remaining],
[Total Passes]/[Total Qty Processed] AS [Overall Yield]
FROM tblPPIn INNER JOIN (tblPartDescriptions INNER JOIN tblOrder ON tblPartDescriptions.DrawingNumber = tblOrder.DrawingNumber) ON tblPPIn.BatchID = tblOrder.BatchID
ORDER BY tblPPIn.BatchID ASC;
don't worry about the details, it works as it is above...
now I only want to display data for batches where there are some parts left, so I've tried adding the following WHERE clause:
WHERE ([Total Good Parts Remaining] + [Total Unprocessed Parts Remaining]) <> 0
should work fine, right?
nope, we get the (all too familiar) 'Enter parameter value: Total Good Parts Remaining' (and the same for 'Total Unprocessed Parts Remaining'), despite the fact I have used these aliases in the previous SQL with no problem...
Is there any way around this or do I have to create a big-ass WHERE statement complete with the subqueries I've already used previously?
This is seriously annoying me today... any help would be massively appreciated!
cheers,
Bogzla
View 7 Replies
View Related
Jan 22, 2008
Hi,
I am running a query that has this function
MyRoundedValue: Round([Bonus Total],2)
I am trying to round up the value in Bonus Total.
Currently the result shows 5140.602 and I want it to round up and show 5140.61
Is this possible? For the life of me I cannot figure it out..
Thanks
Fen How
View 1 Replies
View Related
Mar 9, 2005
I have a subform on my main form which I can access properties etc without error, but when I try to set the sourceobject property I get an error saying it can find the object '~sq_cfrmAction~sq_csubPlanetItems'
My form is called frmAction
The subform is called subPlanetItems
The code that errors is this;
Me.subPlanetItems.SourceObject = "qryInPlanetNotInWIMS"
The query runs fine so it is not that?
Help please
View 2 Replies
View Related
Oct 22, 2005
I want to have a box with yes/no choices defining the Lessons a Student chooses. Sth like this
Because the Lessons are quite plenty and they change from time to time, I don't want to have them predefined in the Sudent table, but to have a related table containg the Lessons providing more flexibility.
My problem is how to assign the Yes/No values from the form to a single record. ANy suggestions?
A first thought is to create a List from Lessons table, with 2 columns. 1st the Lesson and 2nd the Y/N box. Every Lesson would have a value like this:
1,2,4,8,16,32,64...
With this way the sum of the Lessons would be unique for each combination and it could be saved in a single record. But such a solution is not so practical.
Any alternatives?
Thnx in advance
View 1 Replies
View Related
Dec 4, 2013
I'm working on a database that will be used by two different groups. Group A provides a list of items to be investigated by Group B.
I'm wondering if it is possible to:
i) have Group A create an excel file of items to be investigated (let's call the file tblNEW)
ii) open a record in the file through a form (let's call the form frmINPUT) to allow Group B to input investigation findings
iii) save the modified record into a separate table of all the work that has been done (let's call this table tblWORK)
iv) delete the investigated record in tblNEW once it gets saved into tblWORK
View 1 Replies
View Related
Feb 28, 2014
I have a form frmAddNewProject that is a Data Entry form.When you click Add Project on the form, it creates folders and copies files to a location and also creates new record(s) in the ProjectT table with appropriate information.Here is my code:
Code:
Private Sub cmdAdd_Click()
Dim FSO As Object
Dim FromPath As String
Dim ToPath As String
Dim FolderPath As String
Dim strType As String
Dim strYear As String
Dim strGPN As String
[code]....
Everything works fine till here. Now I would like to close the form but closing it gives me an additional empty record.
Code:
Dim ctl As Control
On Error Resume Next
For Each ctl In Me.Controls
ctl = ctl.DefaultValue
Next
Set ctl = Nothing
to remove all values, but then it just adds an empty record.Is there a way to close that form without removing my legitimate new records and without adding empty ones?
View 4 Replies
View Related
Jun 3, 2015
I have a form I would like to close without saving the record using a button. here is the code I have but it closes the form and it also writes the record to the table.
Code:
Private Sub ClosewoSave_Click()
Cancel = True
Me.Undo
DoCmd.close
DoCmd.OpenForm "frmMenu"
End Sub
I found in a thread that Cancel = True would not write the record.
View 4 Replies
View Related
Feb 13, 2015
I have a form for meeting records. One text box contains meeting notes, which is linked to ntext variable (SQL linked table) on the underlying table. The database has about 40 users but this particular form get no more than 10 new records per day, not so much activity.
This is the problem: sometimes a user start filling a new record, fill the meeting notes, but when he saves the record the text box gets blank and the record is saved with null value in the text box. This happens randomly but not very frequently.
Sometimes frustrating because the text may contain a full page of text and then when the user save the record all the typing is lost! Text box is with RTF formatting. I suspect it has to do with the Ntext data type of the underlying table. Shall I convert it to varchar(max)?
View 14 Replies
View Related