RecordSet For A Table
Aug 14, 2006
Can anyone help me to create an accumulative balance in a table if the invoice is the same. For example:
Inv # Transaction Amount Balance
123456 10 10
123456 20 30
123456 15 45
321654 10 10
321654 35 45
321654 10 55
Thanks
View Replies
ADVERTISEMENT
Jun 24, 2014
Is there a way that i can put an ADODB.recordset in a new table using VBA in MS access 2013? The record set is dynamic, hence a new table should get created every time.
View 1 Replies
View Related
Aug 14, 2015
Special situation: The SQL Server Linked Server across the country is linked to a Read Only Oracle DB. This data pull works perfectly and populates the Subform.
The problem is that Oracle can take 3 to 6 seconds to retrieve the single record depending on the network traffic through a small pipe.
The code below shows the RecordSource for the SubForm. clicking on a list box supplies the value. Then 3 to 6 seconds later, the subform populates.
The actual Recordset for this Recordsource is needed to conduct Validation on each field. Normally this would be on SQL Server, I might just create a Recordset Oject and run this SQL statement again in 1 milisecond. In this case, it will probably take an additional 3 to 6 seconds. Avoiding another lengthy round-trip to Oracle would be prefered.
Goal: How does one grab, clone, or other wise reference the existing recordset for the SubForm?
Note: Immediate Window - One single field can be returned quickly
There are 48 fields that need validation - is there a way to reference the entire recordset?
Immediate Window during Break Mode:
? me.fsubsrNavSHLBHL("NavSH_QQ")
NESE ' this is the correct value for the current recordsource
Set a breakpoint right after the line:
fsubsrNavSHLBHL.Form.RecordSource = "Select * from vsrNavigatorSHLBHL where Well_ID =" & txtNavWellID.Value
Immediate Window:
? me.fsubsrNavSHLBHL.Form.RecordSource
Select * from vsrNavigatorSHLBHL where Well_ID =91229
View 4 Replies
View Related
Jul 9, 2005
In a Library database, there is a form about Books Lends o returns (table: MovBooks) When someone needs a books, I need verify if the book is lended or not. (Table: Books, field: Status -Yes/No-) and update if its free
I want to resolve this problem using Recordset.
Thank you very much
View 2 Replies
View Related
Oct 28, 2004
hello there,
just curious if it was possible to populate an empty tables' fields from a recordset that had been defined earlier in VBA under the criteria of a bit of sql code?
cheers.
View 2 Replies
View Related
Mar 27, 2007
Hi,
I'm trying to create a new table from another existing two in vba. I'm using this code without success... Any help will be gratefully taken.
---------------------
Dim strSQL as string
Dim tablaSuma As DAO.TableDef
Dim rst As DAO.Recordset
strSQL = "SELECT * FROM Necesidades_TRS1, Pedidos WHERE Pedidos.Código=Necesidades_TRS1.Código"
Set rst = CurrentDb.OpenRecordset(strSQL, dbOpenDynaset)
Set tablaSuma = CurrentDb.CreateTableDef("TablaSum")
For Each Campo In rst.Fields
tablaSuma.CreateField(Campo.Name, DB_SINGLE) = Campo
Next
----------------------
Mike
View 8 Replies
View Related
Oct 20, 2004
I have rather complex select statement (at least for me) that produces a summary of how a team scored in a league competition that week. I would not even worry about this issue, except that people float around as alternates and I deduced it would be easier to compute and store scores for a team the week they shot with a given group of people versus keeping track of who shot on what team over a 10 week period.
The selection takes 40 individual scoring records and consolidates them into 10 team summary records. I have verified that the query works, but implementing it has turned into a problem.
Problem one: my knowledge of recordsets is almost purely theoretical at this point, having never worked with them. Therefore commands and structures are a problem - mainly, I'm not sure what code is needed to post a recordset to a table
Problem two: the select statement that works as an Access query is bombing in VB
My code to date:
Dim RS As Recordset
Dim DB As Database
Dim strSQL As String
Dim inpWeekNum As Integer
inpWeekNum = 0
'InputBox "Enter Week Number" 'eventually request week number from user. an integer from 0-9
'strSQL = "SELECT tblRoster.* FROM tblRoster WHERE (NIGHT = 'Fri');" 'a test str. this worked.
strSQL = "SELECT tblRoster.TEAM, tblScores.WeekNo, " & _
"Sum([A1T1]+[A1T2]+[A1T3]+[A2T1]+[A2T2]+[A2T3]+[A3T1]+[A3T2]+[A3T3]) AS TeamTotal," & _
"Sum([A1T2X]+[A1T3X]+[A2T2X]+[A2T3X]+[A3T2X]+[A3T3X]) AS TeamXs" & _
"FROM tblRoster LEFT JOIN tblScores ON tblRoster.HEDR = tblScores.HEDR" & _
"GROUP BY tblRoster.TEAM, tblScores.WeekNo HAVING (((tblScores.WeekNo)=0))" 'hardwired week number
' "GROUP BY tblRoster.TEAM, tblScores.WeekNo HAVING (((tblScores.WeekNo)=inpWeekNum))" 'user prompted week number
Set DB = CurrentDb()
Set RS = DB.OpenRecordset(strSQL)
Do While Not RS.EOF
'Appending Code here... 'obviously missing code, but I know that it does cycle through as I would expect it to.
RS.MoveNext
Loop
'This was a previous test based on a canned qry I had saved (that resembles the above qry.
' this successfully posted, but only one record
'DoCmd.RunSQL "INSERT INTO [tblTeamScores](TeamNo, WeekNo, TeamTotal, TeamXs) " &_
' "VALUES (" & TEAM & ", " & WeekNo & ", " & TeamTotal & ", " & TeamXs & ")"
The select statement correctly produces this output in Access (for Week 0):
TEAM WeekNo TeamTotal TeamXs (how does one properly post a table in this interface?)
1 0 2397 182 0 3152 333 0 3292 664 0 2014 135 0 2836 186 0 3652 577 0 2024 198 0 1108 29 0 2630 2210 0 1977 11
Anyone out there have some suggestions? Am I even on the right track?
Thanks.
-Brian.
View 7 Replies
View Related
Apr 13, 2005
HI all
I have form containing some filtered records. What code do I need to put on a button to trigger a make-table query; the make-table thus containing only the current filtered records (not the entire database).
The following will use the entire database:
Dim stDocName As String
stDocName = "qryMakeTableCompanyID"
DoCmd.OpenQuery stDocName, acNormal, acEdit
Thanks
John
View 1 Replies
View Related
Feb 25, 2006
Hi all,
I have a form with around 10 checkboxes which serve as a filter option...now, when I hit my cmdFilter button it works well with a simple MsgBox !Ime showing all the filtered names...now, I want to put the results into a table tblTemp so that I could show the results in my subform. I've tried with making a sql string something like "INSERT INTO tblTemp..." but it's still empty.:confused:
Since this table will serve as a one time data, I will need to delete all records when I hit the Filter button next time...so, how do I send my recordset data into my table.
I hope this sounds understandable...
Thanks a lot,
Daniel
View 14 Replies
View Related
Jul 21, 2007
I'm experimenting in MS Access VBA reading from one MS Access application to another as visible in the code below. My problem is that I'm reading a recordset from an Access file and want to take that recordset (rec) to create a table in the current databank. If I run an cmd.commandtext "make table query" it runs the query across the connection and places the table in the remote database (as expected). Can I take the recordset and create a local table using ADODB command or is there a better approach. (I should note that the remote MS Access file does not have an .mdb suffix) Thanks in advance.
Sub get_indbyind()
Dim strInputfile As String
Dim dlgOpen As FileDialog
Dim bob As String
bob = Application.CurrentDb.Name
' select connection
Set dlgOpen = Application.FileDialog(msoFileDialogOpen)
With dlgOpen
.AllowMultiSelect = False
.Show
End With
strInputfile = dlgOpen.SelectedItems.Item(1)
' make connection
Dim cnn As ADODB.Connection
Set cnn = New ADODB.Connection
Dim strcnn As String
strcnn = "Provider=Microsoft.jet.OLEDB.4.0; Data Source=" & strInputfile
cnn.Open strcnn
' MsgBox "connection made"
' create recordset
Dim rec As ADODB.Recordset
Set rec = New ADODB.Recordset
rec.Open "SELECT * FROM SATransfers;", cnn
Dim n As Long
Dim i As Long
Do While Not rec.EOF
Debug.Print rec.Fields(0).Value; rec.Fields(1).Value; rec.Fields(2).Value; rec.Fields(3).Value
rec.MoveNext
Loop
' create table from connection cnn
Dim cmd As ADODB.Command
Set cmd = New ADODB.Command
Dim rs As New ADODB.Recordset
cmd.ActiveConnection = cnn
cmd.CommandText = "SELECT SATransfers * INTO tmp1 FROM SATransfers;"
Set rs = cmd.Execute
cnn.Close
Set cnn = Nothing
Set cmd = Nothing
End Sub
View 2 Replies
View Related
Oct 12, 2012
I have a table orders details with a sub form displaying the order, I have a combo box to display the product from products table to place in the sub form products box . I keep getting the error message join key of table details not in record set I have checked my relationships and for keys and there all there .
View 1 Replies
View Related
Jun 11, 2013
I have a main form with combo boxes to filter a subform. I want to be able to export the filtered subform data to a table within the database and only include the filtered dataset not all records.
View 14 Replies
View Related
Jan 30, 2006
Hi All,
A bit new to this, any help most appreciated.
I'm trying to set up a table which will have multiple fields (a recordset? is that right, if so I don't know how to set one up in access). Its for a skill set which is utilised by specific lines in a production plant.
Each line in the plant has a set of skills required. I have a skills table (SkillID and Skill), what I want to do is have a Skillset which I can then link to each line
So for example Skillset 1 with a SkillsetID will also have in that table skill 1, skill 2, skill 3, but all taken from the Skill table. However that would involve having the SkillID field numerous times in the same table, but this cannot be done?
The idea is that for each line I can link the Line table to the Skillset table and that tells you what skills are needed for that line.
I hope this makes sense.
Thanks all.
View 2 Replies
View Related
Nov 25, 2014
Basically, I want to be able to click on the New (blank) record button, and then start adding in my Attraction, Date, etc fields in the main form, however I keep coming up with the error:
Cannot add record(s); join key of table 'OrdersList' is not in recordset.
I've gone back and checked all my relationships, and the query the form is based on, and all appears to be working there fine. I can manually enter information on to the tables & queries just fine, (but obviously I don't want other users to be able to see these).
I'm wondering if it's something to do with the Auto Number, which is also my PK in table 'OrdersList'. As the first design of this database had this field set to a Text field and I would manually enter the next sequence and I didn't have any issues adding new Orders to the form.
The form is 'Orders', which is based on a query called 'Orders List'.
View 12 Replies
View Related
Jan 20, 2015
I have inherited an old database with a new field to add some new invoice numbers and increment the number to each recordset by + 1. Starting at 001. I have formatted the field to a Number Field and formatted it to 000"/2015". I now need to populate over 2000 records with the sequential numbers for each record.
I have created the following code as my attempt. Of course it doesn't work!
Code:
Sub AddNumbertoRecords()
Dim db As DAO.Database
Dim rst As DAO.Recordset
Dim counter As Long
counter = 1
Set db = CurrentDb()
[Code] ....
View 7 Replies
View Related
Oct 15, 2014
I have a normal Access table. The first column is ID and is the primary key. The second column is a text. The table consists of two records and is sorted in ascending order. First comes the data set with the ID 1.
Sub test()
Set rs_access = CurrentDb.OpenRecordset("tab1")
rs_access.MoveFirst
MsgBox (rs_access.Fields("id").Value)
End Sub
The message box shows 1. So everything is fine. Now I sort the table descending. But I get the same message. Why? Appearently the recordset doesn't know that the table was modified. The recordset should register that the table is modified.
View 1 Replies
View Related
Jun 4, 2013
I`m currently having the problem to export data from an SQL server into a table. I managed to open a recordset but I`m incapable of adding the recordset to an existing table. I found similar threads but I am still not able to generate functioning code.
Code:
Function fDAOServerRecordset()
Dim db As DAO.Database
Dim dblcl As DAO.Database
Dim rssql As DAO.Recordset
[code]....
View 2 Replies
View Related
Apr 14, 2015
I have a form that gets its info from a query, I would like to be able to add a new item, Customer, etc, etc. But, when I try to add one (I have a button using VBA code, ill post that at the end) it gives me the error
Code:
Cannot add record(s); join key or table tblitems not in recordset.
Code:
Private Sub cmdEventNewI_Click()
Me.Visible = False
DoCmd.OpenForm "frmItemsEdit1", acNormal, , , acFormAdd, acDialog
Me.Visible = True
Me.lstItems.Requery
End Sub ' cmdEventNewI_Click
View 8 Replies
View Related
Jan 26, 2015
I am fairly new to access, and have the following problem with the attached new DB. Thought I have designed the start of a good database with a "Junction Table". Have 1 problem, cannot enter a new name on the from, gives the error below:
"Join key of personnel table not in recordset" ...
View 2 Replies
View Related
Mar 3, 2014
I reused one macro to develop a form in MS access.
The macro fetch the record set corresponding to the reference value from the table.
The reformat value is a numeric field.
The macro code is :
Private Sub Modifiable20_AfterUpdate()
Dim rs As Object
Set rs =Me.Recordset.Clone
rs.FindFirst "[Reference_Number] = ' " & Me![Modifiable20] & " ' "
If Not rs.EOF then Me.Bookmark = rs.Bookmark
End Sub
What to change in the above code to make it work....
View 3 Replies
View Related
Nov 13, 2004
Say I have a table [tbl1] and a recordset [rst1].
The fields in both items are the same. Now, how do I copy/dump/inject (what's the correct term?) the data from the recordset into the table?
View 3 Replies
View Related
Apr 8, 2015
Code:
Function Write_rstADO_to_CurrdB_Table()
'Assumes you have already setup a DSN to your Server
'Assumes YOURDESTINATIONTABLE is the same structure as your SERVER.TABLE
Dim cnnADO As ADODB.Connection
Dim wkspDAO As DAO.Workspace
[Code] ....
View 1 Replies
View Related
Jun 17, 2014
Trying to use a form based on a table to choose a recordset of values, and pick the ID of that recordset to include in another table as a foreign key.
I am not sure how to even search for what I'm trying to do, though I've tried all the variants I can think of anyway.
The idea being that there are a set of values that are associated with each other, and generally found in conjunction with another set of data. So Table 1 contains data such as this, though this is greatly simplified from the numerics that are actually stored in these fields:
FooID Field 1 Field 2 Field 3 etc, etc...
1 x y z
2 d y z
3 x y q
4 x r P
.
.
.
This data is then associated with the information in table 2, and rather than repeat fields 1-whatever in table 2 I want to use the FooID in table 2 to store the link to all of the subsequent field data. Normalization as I understand it in other words.
I cannot figure out how to pull the table 1 data into a datasheet form and allow someone to choose one of the lines of data, store the FooID into an unbound text box, or some other method, and then run an update query on table 2 to update a field with the FooID for the 12-72 records that are in that table.
Would this make more sense as a combo box in a single form? I've been trying to do this with a datasheet, but I think I'm too limited in appending a check box to an individual recordset this way, or at least I've not managed to get it to work so far anyway.
View 2 Replies
View Related
Mar 17, 2014
I am trying to use a Connection to an xlsx spredsheet to read in a table of information (the data is not a table, just laid out in a table, see attached, the one I am trying to load is xlsx not xls but I cannot for some reson upload the xlsx one on here)
I have the following declared:
Code:
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
my connection string is:
Code:
strConnectionString = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" & cstrFolder &
Chr(92) & tempSymbol & ".xlsx;Extended Properties='Excel 12.0 Xml;HDR=YES';"
I open the connection which works fine:
Code : cn.Open strConnectionString
Now here I hit the problem, I have the following SQL string:
Code : strSelect = "SELECT * from [table$]"
The spreadsheet contains just 1 tab, named table so I think I am referring to the data correctly in my SQL string?
When I open the recordet for variable rs using:
Code : rs.Open strSelect, cn, adOpenStatic, adLockOptimistic, adCmdText
I get the error dialogue box:
The Microsoft Access database engine could not find the object 'table$'. make sure the object exists and that you spell its name and the path name correctly.....
I did a Debug.print to check the strConnectionString was correct and the Source is exactly correct and refers to the name of the file I am trying to access exactly.
View 2 Replies
View Related
Dec 28, 2014
I am very new to VBA and I have been self-learning VBA from two month and have been assigned to new project Work Authorization & Lock Out Tag Out.I have table called tblWA & tblLOTO.Basically most of the LOTO/s are associated with WA #, following example
WA # in tblWA
Associated LOTO/s in tblLOTOs
25258
123456
123457
123458
123459
25259
123410
123411
123412
123413
However, both tables are in relationship right now..I have form called WA Switch Board where I have Datasheet View form with all WA records, fields are WA#, WAStatus, WAIssuedDate, IssuedBy, CompletionDate and etc but I have dropdown with with WAStatus with (In Field Today, On-Hold, In Approval, Cancelled, Close).Now from the main switch board when authorized people try to change the status of permit to Closed I want recordset or count to loop through tblLOTO and give me a message box if associated LOTO/s status not equal to Close.In other word, if the associated LOTO/s are not close then the selected WA # in WA Switch Board cant close.Here is the code I have been playing with no success
Private Sub PermitStatus_AfterUpdate()
Dim db As Database
Dim rs As Recordset
Set db = CurrentDb
[code]....
View 3 Replies
View Related
Jun 7, 2013
I am trying to update a recordset using VBA based on the max "process instance" from another table. After the code executes, the field I am updating is still blank.
Code:
Set rs = db.OpenRecordset("myTable", dbOpenDynaset)
If Not (rs.BOF And rs.EOF) Then
rs.MoveFirst
Do Until rs.EOF = True
emplid = rs![Employee Number]
[Code] ....
View 5 Replies
View Related