I am trying to have the code perform these things but unable to do so. While the code would still work, it will not move to the next user with either no date or the earliest date.
Goal:
-Go through the query record by record according to the date/time field
-Find the record with no date or earliest date (in that order)
-change its date to today's date
Code:
Code:
Private Sub Command56_Click() Dim i As Long
With Screen.ActiveForm.[AMID]
Dim LResponse As Integer
LResponse = MsgBox("Do you wish to auto-assign to an Accreditation Manager?", vbYesNo, "Continue")
I have a date/time text field on a form with the General Date format and a combo box next to it that has sequencial times as the row source (IE. 12:45 AM, 1:00 AM, 1:15 AM, 1:30 AM, ETC.) When the user chooses a time in the combo box, I want the time portion of the text box to be updated with the chosen time in the combo. I have tried a few things but cant seem to get it right.
I have a form with Date of Death (DOD) field. I would like update DOD from a table dbo_patient into Z_Patients table.
I have set the datatype as Date/Time in the form for Date of Death.
Code: Private Sub Update_DOD() Dim rcMain As New ADODB.Recordset, rcLocalDOD As New ADODB.Recordset Dim DOD As String rcMain.Open "select distinct PatientKey from Z_Patients", CurrentProject.Connection
[Code] ....
However I am getting some error Run-time error '-2147217913 Date type mismatch in criteria expression in section below.
Code: CurrentProject.Connection.Execute "update Z_MAIN_Processed_Patients set DateOfDeath = '" & rcLocalDOD!date_of_death & "' where PatientKey = " & !PatientKey
Hi, on a database I created with probably over one hundred fields in it I have one text box called update. What I want is if ANY of the fields are altered it then updates the "update" field with date and time. At the moment I have started altering every field with creating an event proceedure in the "on change" entry which reads as below for a change to text5 box. (text141 is the update field)
Private Sub Text5_Change() [Text141] = Now() End Sub
Now, although this works; as you can imagine it's very time consuming going through every single field I have puting this proceedure in place. My question.....Is there a much simpler way of making this "update" field change if any part of the record gets altered ?????
Hope this isnt confusing.
I should add that each record has about 4 tabs(pages) too, so the overall record is spread over all this too. I need something that knows that anything is altered on the record and so update the "update" field
Hi. I have two forms that both look at the same table. One form is for inputting data and the second for is for closing the job. I want to create a button that when clicked automatically changes a field on the input form and also fills in the current date on a field displayed on the closeout form. I then want it exit my two forms and take me back to my switchboard. Can anyone out there help?..Thanks.
I have two tables. PreOrder and Order Tables. When our customer actually order a product, I want all information of that product to move from PreOrder table and append it to Order table. Currently, my user has to run an append query to add the record from PreOrder and add it to Order table. After that, she has to run a delete query to delete the record from PreOrder table. Since our query is setup to run by date, and order number..My user has to type the same thing twice. Is there anyone out there know the easy way? Thanks in advance..
Hello buddies :D, do you have any idea how to make this work?
To select data that falls within this criteria of date range between cboDate and cboDate2 (fields on my form). The date in [tblJobDetails]![timeIn] come in this format "08/17/06 10:24 AM", but the cboDate/cboDate2 (takes in date only e.g 08/17/06) what i am after is to evaluate specific hard coded time in addition to the date entered, i.e. even tho, i haven't entered time on the cboDate/cboDate2, I want specific time hard coded where e.g If i select a date range of 08/17/06 and 08/18/06 on my cboDate and cboDate2 it should really be evaluating: 08/17/06 8:00 AM to 08/18/06 8:00 AM.
This is the criteria i curentlly have on my query in design view tha works perfect in selecting date only. ([tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Or [tblJobDetails]![timeIn]>=[Forms]![frmPendingJobs]![cboDate] Is Null) And ([tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Or [tblJobDetails]![timeIn]<=[Forms]![frmPendingJobs]![cboDate2] Is Null) How can I incorporate 8:00am to 8:00am into my cboDate and cboDate2. What can i do to make this happen? Your kindness will be greatly appreciated http://www.naijaryders.com/forums/images/smilies/thankyou.gif
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName FROM Staff INNER JOIN myTable ON Staff.ID = myTable.StaffID WHERE myTable.myDate >= #3/2/2014# AND myTable.myDate <= #3/3/2014# AND myTable.myTime >= #8:00PM# AND myTable.myTime <= #11:00PM# ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
I have successfully paged through a recordset on my page using the .recordCount, etc. methods, the only thing is I have 2 independent recordsets looping on the page, which when there was not paging involved this worked fine, however now I need to span the results of BOTH of these across pages, I just cannot seem to figure out how! I have one set of records paging fine, but the other either messes the page up, or shows on the first page of results and no more of the other recordset, etc.... so yeah that is basically the problem I am hitting, so I was just wondering is there any examples or ways you could tell me to do this??
Any help that can be offerered would be very much appreciated ).
In a Library database, there is a form about Books Lends o returns (table: MovBooks) When someone needs a books, I need verify if the book is lended or not. (Table: Books, field: Status -Yes/No-) and update if its free I want to resolve this problem using Recordset. Thank you very much
I want to update a field (field1) in each record of a recordset (qryUpdate)
I got the following code (in green) working fine - so far so good. I actually need to update the field from a selection from an unbound combo box. This looks up a table with two fields Period ID (autonumber PK) and a text field called Quarter. I've tried various combinations including the code in red and code such as "rst![field1] = Me.cboPeriod" "rst![field1] = Me.cboPeriod.Column(0).value" etc
but can't get it to work. It has to be something simple but I can't see it.
Private Sub cboPeriod_AfterUpdate() Dim rst As DAO.Recordset
Set rst = CurrentDb.OpenRecordset("qryUpdate") Do Until rst.EOF
If IsNull(rst![field1]) Then rst.Edit rst![field1] = 5 rst.Update End If
rst.MoveNext Loop End Sub
Private Sub cboPeriod_AfterUpdate() Dim rst As DAO.Recordset Set rst = CurrentDb.OpenRecordset("qryUpdate")
Do Until rst.EOF
If IsNull(rst![field1]) Then rst.Edit [rst![field1] = Me.cboPeriod.Column(0) rst.Update End If
I have a linked table to a DB2 database. this table contains key-pair values and has about 140k records.
I use a Sub to update the value of a specific record.
The sub starts by opening the needed DAO recordset Then it uses the rs.Findfirst method It checks if rs.Nomatch is not true (so the records exists!) Then it starts updating the record with rs.edit rs!value1 = myvalue1, rs!value2 = myvalue 2 rs.Update There is where I get the '3021 No current record' error
I use the same sub on the same table to update to different parts. One part works the other gives me the error.
I am not sure if my coding is efficient or not but it takes so long to read lets say tbCOMPANY 40k records and find if values of two columns exists in tbRESULT which holds 30k records. Then if it doesn't find any records in the tbRESULT it will just insert the row otherwise an update will be executed.
What I did was:
1. Read tbCOMPANY each row using for loop 2. tbCOMPANY.FindFirst to lookup if values exists in the tbRESULT 3. If tbCOMPANY.noMatch, it will insert into tbRESULT 4. else it will update the matched row in the tbRESULT
Its been taking like over 30 minutes to process this and still ongoing and it will still keep on running. Now Access is showing as Not Responding in the task manager.., Any efficient way to do this?
I have inherited an old database with a new field to add some new invoice numbers and increment the number to each recordset by + 1. Starting at 001. I have formatted the field to a Number Field and formatted it to 000"/2015". I now need to populate over 2000 records with the sequential numbers for each record.
I have created the following code as my attempt. Of course it doesn't work!
Code: Sub AddNumbertoRecords() Dim db As DAO.Database Dim rst As DAO.Recordset Dim counter As Long counter = 1 Set db = CurrentDb()
How it works: You search for a User, and then you search for a Serial.Now, what if I want to edit the table? (inside the subform, the results). I added an openRecordSet, and Parameters, but I still get the error saying that Recordset cannot be updated.Why? I opened and sent parameters but still fails.
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code: Between [StartDate:] And [EndDate:]
And
Code: Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
I have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
I have an attendance database and I connect the time attendance machine db to my access db, what i am trying to do is to generate a report that shows the time in and time out for specific date. the type of attendance db is date/time.
Please see the attached screenshot db from attendance machine.
an also some time there is duplicate entry, I need to get the first and the last entry only for specific date.
I found this code and have substituted parameters to suit my own needs however the loop is not working. Only the first record in my recordset (which is a test recordset of only 3 records) is being updated.
Also, for testing only, the edit or update being applied is trivial: Description = "WHITE RESIN". If i can get the loop to work I want to substitute higher functionality to the module.
Private Sub Update_Click() Dim dbs As DAO.Database Dim rsQuery As DAO.Recordset
Set dbs = CurrentDb Set rsQuery = dbs.OpenRecordset("qryRmResin", dbOpenDynaset)
I have a form in my front end database that is supposed to allow a user to search for a record based on account number and then make changes to the that record and for it to save in the back end database. I have the search function working where it populates different input boxes on the form with what is stored in the back end database but I cannot get the update function to work. I have tried to assign each input box with a variable and then run an Update SQL function to update each of the fields but the updates are not storing. Any example of a successful update statement that uses VBA variables in it or a way to update a specific record via a recordset type function?
so i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
I am trying to update a recordset using VBA based on the max "process instance" from another table. After the code executes, the field I am updating is still blank.
Code: Set rs = db.OpenRecordset("myTable", dbOpenDynaset) If Not (rs.BOF And rs.EOF) Then rs.MoveFirst Do Until rs.EOF = True emplid = rs![Employee Number]
I have a query that is set as a recordset. The query returns many values and one of the value is the Date field. How can I get the Last date value (as in the recent date entered in the sales table) and save it in a recordset.
Here is my code:
strSQL = "SELECT tblSales.* FROM tblSales;" Set rsQry = db.OpenRecordset(strSQL)
I need to get the last date field in a recordset, can this be done?
