I'm trying to check if a control on the subform is null. I've the following line of code:
Private Sub Form_BeforeUpdate(Cancel As Integer)
If IsNull(Form!FrmOrderInfoMain!SubFrmOrderInfo.ItemC ode) Then
Msgbox "Empty ItemCode"
End If
End Sub
..whereby FrmOrderInfoMain is the parent form and SubFrmOrderInfo is the subform. I get an error for this code as Im not sure what is the correct code to use. Thanks for the help.
Swee
On a main form i have a continuous subform listing Jobs.
On the Click Event i want to display the personnel and equipment separately in two additional subforms linked to the Job i have clicked on by JobID.
I have tried all sorts of references and currently have this:-
Forms!PersonnelAndEquipmentMovementFrm.PerEquipMov Jobs.JobID = Form!EmployeeSubform.JobID.Text
Which does not work?
I've been trying : double click a field in a subform and paste the query results into excel. I already have good code to paste in the recordset, but this recordset must reference a control value in a subform.
The query works and shows the proper results manually, but when I run the Sub it throws a "run-time error 3061: Too few parameter. Expected 1."
I can't seem to set the parameters right. Tried EVERYTHING--except the RIGHT thing.
I have a multi select list box which I am trying to use to open another form and apply a filter based on the user's multiple selections.
List box - lstCatergories
Main Form - frmSuppliersSummaryCategories
Subform on Main Form - frmSuppliersSummaryCategoriesSubForm
The Subform contains the text box CategoryID
Here's my code which nearly works...
Code:
Private Sub cmdFilterSuppliers_Click()
On Error GoTo Err_cmdFilterSuppliers_Click
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
[Code] .....
My problem is that the control "CategoryID" is on the subform and I'm having massive problems trying to reference it. This is the part of my code that won't work:
Code:
DoCmd.OpenForm "frmSuppliersSummaryCategories", acNormal, , "CategoryID IN(" & strWhere & ")"
However; if I open the SubForm directly it works perfectly. I.e.
Code:
DoCmd.OpenForm "frmSuppliersSummaryCategoriesSubform", acFormDS, , "CategoryID IN(" & strWhere & ")"
To summarise... How do I reference the control "CategoryID" on the subform "frmSuppliersSummaryCategoriesSubform"?
When clicking on a command button on a form in order to open another form and go to a specified record, i used to use a code similar to the following:
DoCmd.OpenForm "frmName", , , "[FieldName]=" & Me.ControlName
Is it in the same format the above statement if the form to be opened has a tab control ?
Thanks
I'm trying to get the value of a textbox on one of my subforms and can't seem to get it properly referenced.
I have a main form Main with a tabcontrol having two pages. One page is Timesheets. Timesheets has a subform called Detail_data.
On the detail_data subform is the text box Time_In that I want to reference. I can get to controls on the timesheet page but not on the detail_data part.
Thanks in advance....
Hi all
I've distributed a MS 2003 database to another office 1000km away using 2003 as well. The calendar control doesn't seem to be working. I'm assuming that the MSCAL.oxc isn't referenced. Is there a way I can do this programatically without actually having to talk someone through the referencing process over the phone??
Your ideas are appreciated.
Hey guys,
a quick question.
I have a form called "FormA"
within that form i have a tab control
and one of the pages is called "Page1"
inside that page1 i have a subform named "subform1"
and finally inside subform1 i have a field named "field"
what would be the correct syntax to reference the value of the field???
been messing with this for awhile and am getting a headace, was hoping someone can help
thanks alot
Ricky
I am trying to limit the number of records displaying in a subform [amendedLoans] by selecting only those records that have the same ClientID as the mainform [Customers] and the same loan number as the subforms parent form [ClientAccounts loan changes].[loanno].
I have no difficulty selecting records just using the clientid but as soon as I add the reference to the subform [loanno] field I get no selection of records. I suspect there is an error in the where clause for
[Amended Loans].Loan)=[Forms]![customers]![ClientAccounts loan changes].[Form]![LoanNo]) .
I have built the clause using the expression builder and have had many attempts all ending up with the same result. I'm now at a loss as to where to go from here....
I'm using Access 2003. In "References" (Tools > References > Browse...), I've added in "Microsoft Windows Common Controls 6.0 (SP6)" (c:windowssystem32mscomctl.ocx).
I've then created/inserted an instance of the control "Microsoft ListView Control 6.0 (SP6)" on a Form ("MyForm") and given the listvew control the Name "MyListView".I wanted to decorate MyListView with some custom methods so I've created a new class module ("DecoratedListView") which contains a member field called "lvw".
I want 'lvw' to point/reference to MyListView, but I don't know what reference type to use in its declaration. Importantly, I also want to capture lvw's ColumnClick event.
I've tried:
Code:
Public WithEvents lvw As Object
Public WithEvents lvw As Control
Public WithEvents lvw As MSComctlLib.ListView.2
Public WithEvents lvw As MSComctlLib.ListView
Public WithEvents lvw As CustomControl
and none works when I
Code:
set lvw = Forms!MyForm.MyListView
The first try (Object) doesn't even compile. I get the exception "Expected: identifier"
The second try (Control) doesn't compile either. I get the exception "Object does not source automation events"
The third try (MSComctlLib.ListView.2) doesn't compile and throws the exception "Expected: end of statement"
The fourth try (MSComctlLib.ListView) compiles but fails at runtime with the exception "Type mismatch". Using TYPENAME() on the control returns "CustomControl".
The fifth try (CustomControl) compiles but fails at runtime with the exception "Object or class does not support the set of events".
I can't believe I'm the first person to have tried to capture an ActiveX Control's events in a separate class.
I have a form (named frmAddSession) with a combo box (named Band_Name) and lets say i have it displaying the band "Band A"
I have a query where the criteria is [Forms]![frmAddSession]![Band_Name]. when i run the query the results are blank. but if i type ="Band A" it works just fine.
why won't my reference to the combo box on the form work?
In a series of deductions to try and figure this out, my form only has the one combo box, and my query is based on only one table and only has the one field.
I have a form with four unlinked sub forms on - I am hoping to
1) add a value from one subform to another and more importantly
2) update 1 subform when the other is amended...how exactly do I reference subform 2 from subform1.
I have tried me.parent!form2 and forms!mainform!form2.requery etc but can't get it right
I have an Access 2010 Database frontend to SQL Server 2008 Backend. So far there are 3 Tabs in the Navigation System. The first one is the primary Data Entry form which has a tab control with 3 subforms.
Here's the problem. The database is designed to track potential members based on different types of Ads. The primary Data Entry form holds all of the demographic data for the person that called in response to an ad. The first tab has a subform to track how many times that person has contacted us. The second subform tracks which advertisements the person is contacting us about and the third tracks which Events that person attended. There is no correlation between contacts, Ads and Events.
On the Advertisements we have about 7 different types of Ads we do and each ad can be run multiple times on different days. We want to be able to track which Ad the person contacted us about. The Advertisement subform has a comgo box for the Ad type and a combo box for the ad date. the source for the combo box for the ad date includes the combobox for the adtype as the criteria. That criteria is what's giving me the problem. I've used:
forms!mainmenu!navigationsubform.form!potential_me mbers!frmAdvertisements!cboadvid
Along with every other variation I can think of. The form itself is frmAdvertisements but I'm using it in a tab control and I also tried:
forms!mainment!navigationsubform.form!potential_me mbers!adv!cboadvid
When I run the following code in a module -- to change the value of a label in a subform ("Employees Trained List subform" is a subform of "Contractors") I get an error that says it can't find the form (ie. Contractors). Also, if I eliminate "[Contractors]" the error says it can't find "Employees Trained List subform":
Forms![Contractors]![Employees Trained List subform].Form!lblThisYearTrainedDate.Caption = Year(Now()) + 1 & " Trained"
Any ideas on how to fix? Thanks
Hello,
I need some help with a piece of code for a db.
This code checks to see if the last three characters on a ControlSource.Tag property are "Req" and if they are, tests if it's null or = 0 and if it is then it outputs a msg box stating that the control.ControlSource is required. It does it for every control on the main form.
This has worked.
Now, i need to allow for multiple subforms to be located on the main form along with their controls being tested as well. I want to start another loop for each time the conrol on the mainform is a subform.
I have that done so far by using "If TypeOf ctl Is SubForm Then..."
This is the part i need help with. I want to search all of the controls on the subform when it is a subform. I need to search all of the controls on the subform then, and i'm not quite sure of the syntax.
I've tried various somethings like SUBFORMCONTROL.Controls but that hasn't seemed to work...
If someone could help me, that would be wonderful!
Newbie question: I have a datasheet view subform (called "UpdateProjectsSubform") in an "empty" form. I set it up this way because I was unable to get the Switchboard to open the subform in datasheet view.
I would like to have a command button to set filters in the subform. As I cannot have a button in datasheet view, I think my best option is to place a button on the master form that performs the command on the subform. I have tried every which way, but can't seem to get the correct syntax to reference the subform. I have searched this forum as well as other references with no success. Any ideas?
Thanks!
Nancy
I Open my Form
frm_process_ppl (single form)
which has the datasource as qry_process_ppl_2
on this form is a subform (continuous)
frm_process_ppl_orig
with the same data source linked by [ALINK].I want to run an append query when I click on one of the controls of the subform.On the subform there is a uniqueID called [LNK]
In the append query I have the following criteria for the LNK field [Forms]![frm_process_ppl]![frm_process_ppl2].[LNK]..However it is not working.I think my criteria is wrong.
(This worked fine with just one form but I have had to add an additional subform and the original form was continuous. I cannot add a subform to a continuous form so I decided to creat a single form to house the continuous form) I just cant reference what Im clicking in my query !!
I am trying to add a save/close button to a form that will only close if certain conditions are met and if they arnt then display a message box.I got the basics on how to save and close the form, do a simple if statement and display the message I want but the problem im running into is my subform can have multiple records and of those records each records status is set by 3 different checkboxes. I need all of those records status to be same when the form is closed.
if I do an if statement like
If Me!frmDataform1subform.Form!StatusID.Value = 1 then
docmd....
then all it looks at is the first record, how do I get my if statement to look at all the records in the subform?
Hi,
i'm working in access 97 and am having difficulties pulling a subtotal or referencing any fields on my subform on my main form. I've searched the forum and help and tried to apply the info provided, but i still can't seem to get it to work.
as far as i can tell this should work:
=[MySubForm].[Form]![TxtTotalStaffNumbers]
but i'm still getting the dreaded #Name? error.
anyone got any clues as to what i'm doing wrong?
what about the case where the subtotal i'm referencing is a calculation such as =Sum([Quantity]*[FacilityArea]). Should i still be able to reference it on my main form by pointing to the name of the field?
Thanks very much!
I have a form and subform with the following names:
frmBasic
sfrmCustomers
I have a unbound txt field called txtCustName on the mainform
I want to populate this field from a field on the subform called CustName when the record is selected.
I also have an unbound combo box with the cust ids using the row source from the tables record source from the main form.
I tried the following Code:
Private Sub cboCustNum_AfterUpdate()
Me.Filter = "[Cust_ID]=" & cboCustNum
Me.FilterOn = True
Me.txtCustName = Forms.frmBasic.sfrmCustomers.Form.CustName
End Sub
This didn't work. So I put "= [Forms].[frmBasic].[sfrmCustomers].Form.[CustName]" in the control source of the text box on the main form I want populated.
The name doesn't appear in the field. I get #Name? in the field.
I have a form - purchase, and a subform purchase detail they are linked with a field "puid"..I need the dmax to give me the maximum auto number field "pdid" on the subform in a textbox on the mainform.
I used the control source code:
=DMax("[forms]![purchase]![purchasedetailds]![pdID]","[forms]![purchase]![purchasedetailds]","[Forms]![purchse]![purchasedetailds]![puid]=" & [Forms]![purchase]![puid])
and the simpler:
=DMax("purchasedetailds]![pdID]","[purchasedetailds]","[purchasedetailds]![puid]=" &[puid])
I cannot get this to work no matter what I do.
Form![MainForm].Form![Subform1].Form![Subform2]![Field]
The query containing this statement doesn't return anything and I get no prompts or error messages.
TIA
OK. I have searched and searched and every thread dances around similar situations but none seem to address this particular one. I am trying to make a control on a sub form visible/not visible depending on the condition of a control on a main form. The catch is that the control I'm trying to change the state of is on a subform located in a tab control. I've tried a thousand combinations and none seem to work. How do I reference the control on the subform in a tab control?
Main Form: frmMemberMain
Tab Control: TabCtl12
Tab Control Page: 2
Subform: frmChildren
Control on subform: txtRelationship
Can someone please help before my brain explodes!! Thanks! :eek:
I had a form with two tabs and then added a subform into a third tab. Until I added the subform I could see the tabs at the top in both the design view and the form view. However, since adding the subform, althougth the form looks OK in the design view, when I switch to the form view the tabs are missing. The only way that I am able to get to them is to tab through all my fields until it eventually seems to shift the page up and I can see them. If I switch to another tab and this stage I then have to go throught the same proccess of going through each of the fields until I can see the tabs again.
Hope this makes sense and someone can help!
Sam
How do you tab out of one subform and into another from the main form. I have 3 subforms and after a user is finished entering data into the main form the first subform sets focus. After data is entered into the subform it’s impossible to hit the “enter” or “tab” key to move onto the next subform.
View 3 Replies View RelatedI have two forms, ctrlpanel and users. ctrlpanel is acting as the main form and users as the subform. In a module, I have the following code inside a function that is called on in the users subform:
Code: With Forms![ctrlpanel]![users].Form!cmbSection .RowSource = strList .RowSourceType = "Value List" End With
Can't seem to figure out why I get this error. Have tried a couple different ways of doing this with the same result. here is the error:
"Microsoft Access cannot find the field 'users' referred to in your expression."
users isn't a field, it's the subform and the syntax above is how many sites show how to refer to the subform.
JMH