I have searched the forms and I see codes to apply filters to a button, but can someone tell me what is the code to remove all filters on the current form? I know I can always hit the filter on/off button at the top but im trying to keep users from having to leave the current database form. THANKS IN ADVANCE!
View RepliesI have a continuous form based on table "INCOMES" that shows all the payments received, which mediums can be (field "PMNT_MEDIUM"):
- check
- transfer
- taxes
- cash
Table "INCOMES" is filled using another form, but in this particular form I just want to show "check", "transfer" and "cash" (not "taxes") so that I can track all the cash incomes.
Note: taxes are loaded because they appear in my invoices and I need them there to reach the invoice total amount.So my form has a search bar which allows me to search by PMNT_MEDIUM listing all "checks", all "cash" or all "transfer". I can also search by payment number (meaning: check number). To that end I have a "search" button that applies the filter. And I have another button that "cleans" the filtering by "putting a "" in the search-bar and then calling the "on click" of the search button".
What I need is, no matter if I click over the "search" or "clean" button, it NEVER shows me the "taxes".Search button, on click code:
If IsNumeric(Me.busq_chq_med) Then
Me.Filter = "[PMNT_MEDIUM_NUMB] =" & Me.SEARCH_BAR
Else
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*' or [INVOICE] like'" & Me.SEARCH_BAR & "*'"
End If
Me.FilterOn = True
Clean filter button, on click code:
[SEARCH_BAR] = ""
Call [Search button]_click
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.FilterOn = True
hi, i have a search form, and when you double click on the record, it opens that record in my main form (which opens filtered)
this is fine because it displays the record that i want to see
however, when i try to perform other tasks on my main form, such as choosing the id from a combo box and finding that record, it wont work because the form is still filtered, one way to get around this is to open and close the form, but is there a way that i can implement something into my refresh button that removes a form filter.
Private Sub Refresh_Page_Click()
On Error GoTo Err_Refresh_Page_Click
DoCmd.DoMenuItem acFormBar, acRecordsMenu, 5, , acMenuVer70
Exit_Refresh_Page_Click:
Exit Sub
Err_Refresh_Page_Click:
MsgBox Err.Description
Resume Exit_Refresh_Page_Click
End Sub
I have a form that opens with a filter on depending on what the user is supposed to see. When I deploy this, I don't want them to see the "toggle filter" button at the top. I tried making a custom ribbon like this:
Code:
<customUI xmlns="http://schemas.microsoft.com
/office/2006/01/customui">
<ribbon startFromScratch="true">
<tabs>
<tab idMso="TabHome" visible="false" />
[Code] ....
But it didn't seem to have any effect. When I applied it, it didn't even create "A Custom Tab". That might be because I have disabled everything that I could disable on the "Current database" options, I'm not sure.
I have a basic question.
I am trying to put a button on a form I have created so that I can use Filter by Form feature on it. I used the toolbox commnad button wizard and chose the Form Operations -> Apply Form Filter option for the button.
Unfortunately, this button does not work for this choice. In the Form view, if I click on this button nothing happens. Other choices in the wizard such as Edit Form Filter etc works.
Does anyone know what could be the problem? Is this an Access bug (i am using Access 2003).
If it is a bug, can anyone suggest what little modifications one might have to do to the VBA code underlying OnClick event for the button to make this command button work?
thanks a lot for the help
Hi, I'm an Access newbie. I've designed a fairly simple database to replace an old spreadsheet that was becoming unwieldy -- it was never really used so much for calculation as for data storage, so Access seems more appropriate anyway.
One of the functions I used in Excel was the autofilter, which I found very useful for zeroing in on specific portions of the data. I was wondering how I would do the same thing in Access, and then I discovered the "Filter by Form", which works just fine -- even better actually, since it has the whole and/or functionality.
I was wondering though if it would be possible to invoke "Filter by Form" using a command button. That would make it even easier, especially for some of my users who would almost certainly not know about "Filter by Form" otherwise.
How could I activate filter menu with a command button. The filter menu I am referring to is the one on the home tab.
View 1 Replies View RelatedI am trying to filter a form by using two unbound text boxes that a user can enter in their criteria and then clicking a command button to filter the form using the criteria entered into the text boxes. My fields are as follows:
Bound Field: MondayD1
Unbound text box: txtMonday
Bound Field: SundayD7
Unbound text box: txtSunday
Command Button: cmdSelect
MondayD1 = txtMonday
SundayD7 = txtSunday
I have looked up several options using vb for the on click event of the command button but I either get an error message or the form shows up blank.
I'm trying to use a command button in a form to filter and open a report. I am able to get it to open the report, but I cannot get it to filter the report based on a combobox in the form. I've tried every combination of code I could think of and find. Here is what I currently have:
Code:
Private Sub FilterReport_Click()
DoCmd.OpenReport "Report", acViewReport, "First Name='" & Me.FName & "'"
End Sub
Code:
Option Compare Database
Private Sub Report_Open(Cancel As Integer)
Me.RecordSource = Me.FName
End Sub
"FilterReport" = Form Button
"Report" = Report
"First Name" = Report Field
"FName" = Form Combo Box
I am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies View RelatedIs it possible to remove a filter using VBA.
I need to remove a filter on a form when a user clicks on a drop down box.
Hi
When I filter on a form on our database, I cannot then remove this filter. In order to continue working i have to exit the database completely!
Please help!
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
How can I create a "Filter Button" on a form and filter my records? I create a textbox on a form and a filter button on the right. Then I click the filter futton, the filter function will search/match the content in the box through the datasheet. And then the results of the filtering will be pop up on the split form datasheet.
View 3 Replies View RelatedHi, I have got a small problem and maybe someone could advise me.
I am creating a customised command button from a label button. The new button works fine but I can't apply the 'requery' function to it, if i do an error occures and i am being prompt to save the data first???? :confused: :
Private Sub Labelsearch_Click()
Me!itemquery.Requery
End Sub
Private Sub Labelsearch_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.SpecialEffect = 2
Me.Labelsearch.BackColor = 255
Me.Labelsearch.ForeColor = 10092543
Me.Labelsearch.FontItalic = True
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Me.Labelsearch.ForeColor = 255
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End Sub
Private Sub Labelsearch_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
'Come back to initial state when button release'
Me.Labelsearch.SpecialEffect = 1
Me.Labelsearch.BackColor = 16373685
Me.Labelsearch.ForeColor = 8388608
Me.Labelsearch.FontItalic = False
Me.Labelsearch.FontBold = True
End
If I create a command button with the wizard and assign the code :
me!itemquery.Requeryto the on_click event my form is working fine.
Why is his code is not working if I assign it to a label? :o
I have a database For customers of the company, when you open the main form through the search form , there are a filter . when you try to move between orders of this customer, there are a mssage (Asking you to approve of movement between the customer orders). to this point no problem, when you approval to move , cancel the filter on the main form with a stay at the current record (current customer).
View 14 Replies View RelatedSo I have been developing a database tool that needs to have multiple ways of filtering data. I wanted to be able to display the data nicely so I'm using a split form.
As usual, there is an easy to read form on the top half and a datasheet on the bottom half. On one side of the form half I have some comboboxes that are associated with fields in the datasheet. The comboboxes apply multiple filters, narrowing the search results down. It all works fine.
However, I've been trying to figure out a way to remove just one filter at a time. There is a button to the right of each combobox that is intended to clear just one filter.
So far this is what I have. This code clears all filters.
Code:
Function removeFilter(source As String, combo As ComboBox)
'source is the field being filtered and combo is the current
'value of the combobox
With Forms("PART_QUERY")
.Filter = "[" & source & "] = " & Chr(34) & combo & Chr(34)
.FilterOn = False
End With
End Function
I had some success using another method with select statements. Every time I cleared a filter, I would also check every other combobox to see if they were not null, then reapply each one of there filters. That seems way over complicated. I'm sure I'm missing something.
How do I remove one, specific filter from a split form, after I have applied many different filters?
I have placed a filter button on a form as a filter and written the following on-click event procedure:
DoCmd.SetWarnings False
DoCmd.RunCommand acCmdApplyFilterSort
Me.Filter = "ACCOUNT_DO_NOT_EMAIL = 'HS'"
Me.FilterOn = True
When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.
Lets say that I have four combo Boxes on my form ’A’ I need to create another form ’B’ that will give the admin the permission to add or remove from these combo Boxes their values, do I need to create another form and simply add 4 combo Boxes and connect them to their source? What about the add and remove button is it done like VB? Can anyone help me with that?
View 2 Replies View RelatedI have been working on this for awhile, and can't figure it out for the life of me!
I have a form set up with a drop down box that lets me pick from values from a table based off of the Primary Key of that table (Row Source = SELECT Order.OrderID, Order.OrderName from Order). I have a button on the form that I want to set a value (Closed) from the table entry based off of the order selected.
Pseudo code would go something like this.
Closed.Value = True Where Table.Order.OrderID = SelectedOrderID
Table.Order is a Table Named Order (obviously)
Closed is a yes/no field in my Order table
OrderID is the primarykey of the table Order
SelectedOrderID is the drop down box.
Any help would be greatly appreciated!
I, unfortunately, have been singled out as the Access guru in my work area. We have 223 people and the Information Manager has tasked me to modify a database he "found" to be able to track a number of things, but most important to him: performance reports.
I have posted the sample of what I currently have. What is being asked of me is a way in which to have a button or by double-clicking a block where a date would go for all other dates on the form to become non-visible while the current date stored in the computer the database is being worked from be entered in the block where the button or double-click happened. All this links to a report for the IM to be able to track what performace reports are out, and when they are due back to his section. He also wants me to be able to show which are overdue and where they are at. I am not sure if it is at all possible, but with me having spend most of last week purusing the articles on Access here, I know now that nothing is implausible if you happen to go about it the right way.
Since I have read the rules on posting, here is what I have done. I searched the forum for command button and got a lot of really cool ideas to use elsewhere in the database. I looked up the help in the program itself for command button, and got some good information on how a command button works, but I cannot make it put a date into a block. I can enter the date in any block that is a date format, but then I have dates in every block. He only wants to see the most current date in any of the blocks.
Any assistance at this point would be appreciated. If I have missed something in another thread, I apologise in advance.
how can i assign a formula to a command button?
also can anyone give me specific advice about calucalating the % of check boxes ticked across multiple records.
thanks in advance
A couple of weeks ago I asked the question of how to send a single record from one table to another (Archive table) using a command button. I got a response. I have had time to work with this a little. My problem is I keep getting a error message "Run-time error '3075'; Syntax error (missing operator) in Query expression "[New ID]='. I wanted to mention that the archive table has an "archive ID" field as well as "New ID" that links the tables. I have the following code. Please help with this if possible.
" Private Sub Command667_Click()
' Save the main record if it has not been saved.
If Me.Dirty Then
DoCmd.RunCommand acCmdSave
Me.Recalc
End If
If MsgBox("Do you want to archive this record?", vbYesNo) = vbYes Then
Dim SQL As String
' Move main record to Grants Activity Archive.
SQL = "Insert into [Grants Activity Archive]" & _
" select * from [Grants] where [New ID]=" '" & Me.ID & "'"
CurrentDb.Execute SQL
Me.Recalc
End If
End Sub "
The error seems to refer to the & Me.ID section. I have tried putting Me.New ID and also Me.Archive ID. The Grants Activity Archives is the subform where I want the record to go. This subform is set up like a form with many fields so it is a lot of work to type the main record from the Grants table to the Grants Activity Archive table every time you want to archive a record. I hope that makes sense.
Hi all
Can any one correct my attached program to make it works with one command button only please?
Using two buttons make conflict.
Any help will be highly appreciated.
Thank you
vbnt
Hi I can't seem to be able to find any option to open a table from the command button wizard how is this possible. Thanks
View 2 Replies View RelatedHi,
How can I make command button on my DAP to use update query that I wrote? :confused: