I have developed quite a large database for my company to register complaints on. At certain points, a user may encounter an error when a procedure goes wrong and I want to know if there is a way I can remove the option to debug when it pops up saying End or Debug. Some of the users are using Access Runtime and I know that this will not allow them to debug but for those that are Full version users, I need to prevent this....prying fingers! :-)
Using code on a form to look for a null value for a field on my form. For soem reason this isn't working. I'm checking for a null value in the field on the form. Even if the ClosedDate field is null it still shows the Not null message box. Am I doing something wrong? Thanks
Private Sub Command102_Click() If Me.ClosedDate = Null Then MsgBox "Null" Else MsgBox "Not Null" End If
Hello I try to print some reports one-by-one using a button . In the no_data event of each form I've added a message box informing the user that the form will not be printed due to the lack of records. Everything is ok so far. However, after my message box appears and I press ok, a run-time error '2501' occurs informing me that the "openreport action has been cancelled" and promting me to end/debug the vbcode. Is there a way to by-pass this "error" and carry on without having to end/debug the project? Thank you in advance
I have an append query which fails due to validation rules. There are no field validation rules, only enforced table relationships. There is an autonumber field which I am omitting from the INSERT and SELECT clauses in the hopes that it will take its next value.
How do I determine which fields are causing the problem? I have changed the query to a simple SELECT and manually typed in the resulting values with no problems. Note that ALL records I am attempting to add fail the rules.
I found an old post by sbaxter that appears to give me what I need. The problem is that there must be something I am not understanding.
Right now I am getting an "invalid use of null" warning, even though I know that there are values out there.
Everything is on SQL server and I am using an adp file.
The goal is to take the year from the "date received field." and check the table for all records that match. Then get the maximum "Claim_Number_Increment" value from the table. My new increment value will become one higher than that. (I haven't gotten to the point of handling the reset to one when there are no values year - one thing at a time.)
Here's my code, adapted from sbaxter's example:
Code:Dim dtCurrentYear As DateDim s As StringDim intIncrement As IntegerDim db As New ADODB.ConnectionDim rs As New ADODB.RecordsetSet db = CurrentProject.ConnectiondtCurrentYear = Year(Me.txtDateReceived) s = "SELECT MAX(Claim_Number_Increment_I) As 'Increment' FROM dbo.CSF_Claims_T " _ & "WHERE Year(Date_Received_DT) = " & dtCurrentYear Set rs = New ADODB.Recordset rs.Open s, db, adOpenStatic, adLockOptimistic intIncrement = rs.Fields("Increment") Set rs = Nothing Me.txtIncrement = intIncrement + 1
Somehow, it is telling me that I have no values - in reality, I should be getting a 4.
I am using Windows 8.1 64 bit system. Into attached access file (OfferStudy.accdb) ,trying to load an activeX TreeView control by defining into a form module. First, I created an empty form and activeX Treeview control.When I define tv variable As TreeView as created in application, it is changing as Dim tv As treeView instead of TreeView. After my code is completed,an error message ("user-defined type not defined") is returning as shown in attached (DebugError.png)file.
I suppose that there is some conflict on creating activeX control on my Access 2013 application.
I am using an Access database for a foreign language dictionary project.
One of the forms I use is populated by a query (qryLemmaTable) to retrieve information from tblLEMMA.
This form works precisely as I intend it to work, but there is a glitch on it that is driving me mad.
The form in question has an option group with 11 radio buttons that correspond to the parts of speech associated with each word in tblLEMMA.
When I click on the button optAdjective I apply a filter and the only records that are displayed are adjectives. (The same applies for Nouns, Verbs, Prepositions etc.)
Here is the glitch: even though the radio buttons apply the filter correctly, no “black spot” appears in the button. Other signals on the screen let me know what word type is selected, so I can accomplish what I want, but I want the “black spots” too!
Perhaps this will be a clue: For each radio button I use the following code in the GotFocus event. Me.FilterOn = False Me.Filter = "wordtype = 'A'" ‘(or N, etc) Me.FilterOn = True
And this for the Lost Focus event Me.FilterOn = False
I stumbled upon the Option Group function just yesterday and, happy as a clam, I created a group with 2 options in radio button style. I assigned the values to a field called Registration_Type as the 2 options are "Confirmed Registrants" and "Prospective Attendees".
[Great. That part works well. When I look at the table, a 1 or a 2 is in that field so it's great to know how to control accidental ticking of radio buttons (previous 450 records or so didn't have this option group functionality so one might easily tick one of the buttons. So one part of controlling option group I know I can handle via the table itself for now.]
The challenge is how to ensure the user always ticks one or the other ... I went back to the main table and tested the 'required entry' option for the Registration_Type field but forcing an action like this is not ideal in my mind. The usual error message vagueness for the average user is no good and I don't want to limit the user so much.
Is there a way to simply have a popup come up warning that neither radio button was ticked? Perhaps something linked to the form - i.e., maybe "after update"?? I only learned about attaching code to before and after update on controls a couple of days ago, so not sure if this would be best approach.
Just something to let the user know that nothing has been ticked in the option group as that controls in which of 2 reports the data will show up in so any record not ticked might mean a registrant being left out, which would be rather disastrous <g>.
When I click a tab (table,queries,reports or module) I receive an error that says (" isn't an index in this table. Look in the indexes collection of the TableDef object to determine the valid index names). Please help.
i have been sick for quite a while,But back on track now.In the past i was building a car event db and would like to finish it.I have checked it out and there seems to be a few errors that i can't remember anything about.
you must have outlook installed otherwise some missing references come up.also there seems to be a problem with the date on the invoice form,the backup section in utilites.
If someone could have a look and point me in the right direction it would be greatly appreciated.
I have database which has worked normally, and just made a couple of amendments
I then go to edit a form (which I had not amended) and get an Access has an fatal error etc.
I reopened it. and repaired compiled etc, but absolutely impossible to get into this form. Access crashes every time I try to do something with it. I can't even delete the form.
(This was A97)
There's no problem, I just got my last back up, and imported the changes I had made from the faulty dbs -
I just wondered if anyone else ever got these issues, and what they did about them.
I've created an Access Database off of an old Fox Pro System. What I need to do is take the data from the tables in the old system and convert them in Access '03. I have roughly 4600 records to transfer.
When I copy the data from the old system and paste it in an Access table, only 300 or so records are pasted. Also, when I check the paste errors, there are less than 100 in there. Where are they going?
Some of the files aren't pasting because there were input errors on some. Others are linked with a department and Acct number and some of those are no longer current, so another reason why some of these records aren't pasting. This is a problem, but should only be around 500-1000 records tops.
I have noticed if I paste less at a time, I get less errors and more are actually copied through, but I don't know exactly how many I should do at a time?
Some questions I have are:
1. How many should I paste at a time?
2. Am I missing something with the paste errors, is there like a setting I can adjust?
3. Is there a better way to convert this old table into a new table?
Any suggestions or comments would be great because I have been stuck on this for a while and I DO NOT want to input these records one by one.
Thank you in advance,
Josh
Here's an email I sent to one of my friends seeing if he had any insight. I might explain my problem a little better here:
Purchasing Department has an old Fox Pro Contract System. I made this same system into Access and it works great. My problem is now converting the tables from the old system into the new system. There are approx. 4200 records. I have tried pasting them all in together and also sections at a time, but everything I do so, I get more or less copied through, and more or less paste errors displaying the ones that hadn’t copied over.
The reason some are not pasting in is because of old user input errors. Another reason is department and account numbers have changed therefore when the copy takes place, if Access doesn’t recognize an Acct number, then it cannot relate it to a department and will not paste in. I’m fine with that though. The problem I’m having is I’m always getting different amounts of errors each time I do this. For example, I did the first 500 records. Had 21 paste errors, all the others pasted fine. I then tried to do less so I copied the first 400 and only received 3 errors, but then I did the next 400 after that and only 200 pasted through and it only displayed 20 or so paste errors. I think there are roughly 400-500 bad records so I’m not understanding why all but those 400-500 paste.
We have an access db that has been working fine for ages and now when we click on a New Record button we are getting the following error:-
Run time error 2105 - you can't go to the specified record. erroring out on the line DoCmd.GoToRecord , , acNewRec. We are not aware of anything changing on the PC that the db is sitting on. I have spent the whole day searching the web but have found nothing helpful.
I have compacted and repaired the db, even went to the form/table security to see if all users can edd/add.
I've created an Access Database off of an old Fox Pro System. What I need to do is take the data from the tables in the old system and convert them in Access '03. I have roughly 4600 records to transfer.
When I copy the data from the old system and paste it in an Access table, only 300 or so records are pasted. Also, when I check the paste errors, there are less than 100 in there. Where are they going?
Some of the files aren't pasting because there were input errors on some. Others are linked with a department and Acct number and some of those are no longer current, so another reason why some of these records aren't pasting. This is a problem, but should only be around 500-1000 records tops.
I have noticed if I paste less at a time, I get less errors and more are actually copied through, but I don't know exactly how many I should do at a time?
Some questions I have are:
1. How many should I paste at a time?
2. Am I missing something with the paste errors, is there like a setting I can adjust?
3. Is there a better way to convert this old table into a new table?
Any suggestions or comments would be great because I have been stuck on this for a while and I DO NOT want to input these records one by one.....
I do a query to remove "." from a list of my servers. This works great, but for every name on the list without a "." I get an error in the output. Is there any way to remove these errors from the output, so I only see the data that has been properly pruned down?
I have an unbound combo box that is sporadically failing with an error message when an entry in its pulldown list is selected. The error message is to the effect: 'The value you entered isn't valid for this field' .
The record source for the combo box is a table/query which is updated by an event triggered by another control on the form. That code also sets the Format property of the combo box to match the native Format of the field from which the combo box is retrieving the data. So data from Yes/No field, a date field, or a currency field, for example, display properly in the revised combo box. When the combo box is populated from a source field that has no special format (the usual case, as with text fields), the code resets the combo box's Format to "".
Again, the combo box has no control source (it is unbound). So, the only culprit for an error message like this that I can think of is this Format property. Yet, when the error occurs, the combo box's Format is properly set to "", which should permit any kind of data, and I try entering any kind of data at all -- all data is rejected with this error message.
this is probably an old one but its catching me out. I'm writing a sports club database in ASP. When users submit their club details in the form to Access, I get errors if it has the characters ' in any of the fields. I've managed to get around " by replacing it with "". However, this doesn't seem to work with '
I'm new to ASP... anyhow the part of my form which deals with this is:
I also do a bit more error checking on the email address, for length, @ etc. This bit seems to work ok. However, Any tips on how to improve the error handling for ' or " before its submitted to access is appreciated.
My Access 2000, created the dummy's way, has been perfectly happy with its query expressions. But when I create a module calling up these queries, I get Compile Error on many perfectly legal expressions such as Left([pfn],1). I've tried repairng the database but to no avail. What is going on, please?
Btw, DBicken, it's when I include your text concantenation code (Posting 6/21/06: "A whole lotta text/stitching") but I don't think it's your fault: it's just exposing it. I can't try your suggestion until I solve this problem.
The problem is that when an admin update the database from a web application that I created in .asp, it gave an error message. The only way to fix this is to restart the IIS services and others that depend on IIS. But this is not practical. Code:Microsoft OLE DB Provider for ODBC Drivers error '80004005'[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query./FoodMenu/CalendarPopUp.asp, line 62 Here is the code for 'CalendarPopUp.asp'. Its quite long. Code:<%@ Language = "VBScript"%><%Option Explicitdim NewEvent 'As Booleandim EventDate 'As Datedim EventStartTime 'As Datedim EventEndTime 'As Datedim EventBLD 'As Stringdim EventDescription 'As Stringdim EventDateString 'As String dim EventID 'As Stringdim Conn 'As ADODB.Connectiondim rstPopUp 'As ADODB.Recordsetdim SQL 'As Stringdim BLD 'As Stringfunction SafeQuote(InString)safequote = replace(InString,"'","`")safequote = replace(InString, vbCrLf, "<br>")safequote = replace(InString, " ", " ")end functionfunction SafeDate(DateValue)if isdate(DateValue) thenSafeDate = "#" & DateValue & "#"elseSafeDate = "NULL"end if end function%><!--#include file="include/incConn.asp"--><%'***** Save Form Data *****if Request.Form("cmdSaveRec") = "Save Event" thenif len(Request.Form("txtDetails")) > 0 thenif Request.Form("NewEvent") = "True" thenSQL = "INSERT INTO tblCalendar ( [Date]"SQL = SQL & ", StartTime"SQL = SQL &", EndTime" SQL = SQL &", BLD"SQL = SQL &", Description ) "SQL = SQL & "VALUES ( "SQL = SQL & SafeDate(Request.Form("txtEventDate")) & ", " SQL = SQL & SafeDate(Request.Form("txtStartTime")) & ", " SQL = SQL & SafeDate(Request.Form("txtEndTime")) & ", " SQL = SQL & "'" & SafeQuote(Request.Form("BLD")) & "', "SQL = SQL & "'" & SafeQuote(Request.Form("txtDetails")) & "' );"'Response.Write sqlConn.Execute SQLelseSQL = "UPDATE tblCalendar SET "SQL = SQL & "[Date] = " & SafeDate(Request.Form("txtEventDate")) & ", "SQL = SQL & "StartTime = " & SafeDate(Request.Form("txtStartTime")) & ", " SQL = SQL & "EndTime = " & SafeDate(Request.Form("txtEndTime")) & ", "SQL = SQL & "BLD = '" & SafeQuote(Request.Form("BLD")) & "', "SQL = SQL & "Description = '" & SafeQuote(Request.Form("txtDetails")) & "' "SQL = SQL & "WHERE ID = " & Request.Form("ID") & ";"'Response.Write sqlConn.Execute SQLend ifelseend ifSet rstPopUp = NothingConn.CloseSet Conn = Nothingend if'***** Process QueryString *****if Request.QueryString("NewEvent") = "True" thenNewEvent = TrueelseNewEvent = Falseend ifEventDate = Cdate(Request.QueryString("Date"))EventDateString = Request.QueryString("Date")if len(Request.QueryString("EventID")) > 0 thenEventID = Request.QueryString("EventID")SQL = "SELECT * FROM tblCalendar WHERE ID = " & EventID & ";"set rstPopUp = Conn.Execute(SQL) if not (rstPopUp.EOF and rstPopUP.BOF) thenrstPopUp.MoveFirstEventDate = rstPopUp("Date")EventDateString = cstr(Month(EventDate)) & "-" & _cstr(Day(EventDate)) & "-" & cstr(Year(EventDate)) EventStartTime = rstPopUp("StartTime")EventEndTime = rstPopUp("EndTime")BLD = rstPopUp("BLD")EventDescription = rstPopUp("Description")elserstPopUp.Close Set rstPopUp = NothingConn.CloseSet Conn = Nothingend ifend if%><html><head><%if NewEvent then%><title>Add New Event</title><%else%><title>Edit Event</title><%end if%></head><body bgcolor=#0066a9 text=black><table border="1" width="481" id="table1"><tr align=center><td align=center width="480"><font color=white>Breakfast 8am-10am Lunch 11am-2pm Dinner 6pm-10pm</font></td></tr></table><%if Request.Form("cmdSaveRec") = "Save Event" then%><script for=window event=onload LANGUAGE="VBScript">close()</script><%End If%><table width=480 height=380 border=0><form action=CalendarPopUp.asp name=frmEvent method=post><input type="hidden" name="ID" value="<%=Request.QueryString("EventID")%>"> <tr> <td align=left bgcolor=#0066a9> </td> <td width=55% bgcolor=silver> <table width=100% height=100% border=1 bordercolordark=Gray bordercolorlight=White> <tr bgcolor=silver bordercolor=Silver> <td align=center valign=middle><input type=hidden name=NewEvent value=<%=NewEvent%>> <table height=100% border=0 cellpadding=1 cellspacing=1> <tr> <td align=center><b>Select a Date:</b><br><input type="text" name=txtEventDate Value="<%=EventDateString%>" size=10> </td></tr><tr><!-- <td align=center> <b>Select a Start and End Time:<br>(i.e. 3:00pm) (i.e. 5:00pm)<br></b> <input type="text" name=txtStartTime value="<%=EventStartTime%>" size=10> / <input type="text" name=txtEndTime value="<%=EventEndTime%>" size=10> </td> --></tr><tr> <td align=center><input type="submit" name=cmdSaveRec value="Save Event" size=25> </td></tr> </table> </td> </tr> </table></td><td align=right> </td> </tr> <tr> <td align=center bgcolor=#0066a9 colspan=3><select size="1" name="BLD"><option selected>choose meal type</option><option>Breakfast</option><option>Lunch</option><option>Dinner</option><%=EventBLD%></select></td> </tr> <tr> <td align=center bgcolor=Silver colspan=3> <table width=100% height=100% border=1 bordercolordark=Gray bordercolorlight=White> <tr bgcolor=silver bordercolor=Silver> <td align=left> Please Enter a Brief Description of the Event:<center><textarea rows=9 cols=53 name=txtDetails><%=Replace(EventDescription,"<br>", vbCrLf)%></textarea></center> </td> </tr> </table></td> </tr></table></form></center></body></html><%set rstPopUp = Nothingset Conn = Nothing%>
So, I look up in this site and follow it. No luck. I even follow theis link Code:http://www.webwizguide.info/asp/faq/server_permissions.asp But it was already configured that way.
Even when I try to add, it gave me a similar error message. Code:Microsoft OLE DB Provider for ODBC Drivers error '80004005'[Microsoft][ODBC Microsoft Access Driver] Could not delete from specified tables./FoodMenu/include/incAdminDel.asp, line 21 Here is the code for 'incAdminDel.asp' file Code:dim TmpString 'As Stringdim Item 'As Stringselect case Request.Form("cmdTopic")'***** Community Calendar *****case "Edit Community Calendar"for each Item in Request.Formif left(Request.Form(Item),6) = "Delete" thenSQL = "DELETE * FROM tblCalendar WHERE ID =" & _mid(Request.Form(Item),7) & ";"Conn.Execute SQLend if
Can anyone tell me what I need to look for?
P.S. This is an Online Food Menu which is inside an 'Employee Directory' that is a web application. When a user open up the 'Employee Directory', it load up the page along with an icon to view 'Online Food Menu'. Kind of like having a web application within a web application. Updating the Employee Directory is not a problem. The issue lies on the admin side where s/he try to update the menu, it give 2 of the above errors that I mention.
Background I'm appending data using an append query. I have a known error that I'm trying to work around. sometimes when trying to append, the field names are slightly different and I get a prompt for a parameter value. ideally i'd like all the field names to match up...
So.... I'm trying to error trap this. what I need is some code that will...
if prompted for a parameter, cancel the parameter and goto query 2 (or error1).
I can't seem to use on error because access isn't treating it as an error...
