Replication And Security
Aug 31, 2004
It's me, yet again! This database I have built for the hospital I am employed by is almost ready
for distribution. The only thing I have yet to do is set up securities for each of the medical directors.
For example, I don't want the ICU/Cardio-Telemetry Director to be able to view employee data for the Emergency Room staff and vice versa. I tried once at the very beginning to do a mock replicated database just to see if I knew what I was doing, and frankly, I didn't, not even at all! Should I set up replicas on the network for each director with only their little (or huge) bits of information, or should I setup securities or both, or are they the same thing?
I tried to do a new workgroup and set up groups and users there, but when I tried to log in as someone else, it didn't work. Any ideas? Thanks!
KellyJo
View Replies
ADVERTISEMENT
Nov 13, 2006
Hi everyone
I have a database accessed by alot of people and have recently added user level security so that i can monitor who is logged on etc.
Another thing i need is the ability to update the design of forms whilst people are on the database. To do this i planned on creating a replica and synchronising any changes after i had made them.
However, this is causing problems with my security. I cannot create the shortcut needed to give people access to the replica, they can only access the design master, which defeats the point!
Any help much appreciated
James
View 3 Replies
View Related
Aug 8, 2005
Hi,
I have received a replicated db --- that is all
(not a master) I want to know if any one has experience in "unreplicating"
a db and what steps I take to unreplicate this db. I know (more or less) what replication does for you, but I have never done it !!
TIA
Marty
View 3 Replies
View Related
May 26, 2007
Hi folks,
Thanks to the many of you who have helpped me get this far. I am finally ready to deploy my database! I would not have gotten this far in just a few months if it were not for your helpful advice. :D
One of the final stages is to place the database on the organization's server and to put FEs on each of the work stations. I've read a bit about replication and splitting of databases but I have one question I haven't found answered here...
What is the best time line for doing this?
Do I replicate the data base and then split it?
Or do I split the data base and then make replicas of the FE?
Does it matter?
Also - is replication truly needed for all data bases - I have a test copy in which I split the Access file, then just copied each front end to 2 machines and it seemed to work okay. Am I missing something that will come back and "byte" me in the keester?
Many thanks again for previous help and for your answers to this question.
t
View 5 Replies
View Related
Oct 28, 2004
Need some advice on Replication of a backend mdb please. I currently have a client/server app - works great. The users now need to collect data from their internet as well as entering data themselves in-house. Situation... can not link tables from web mdb file IS dept forbids link through firewall. How might I be able to keep the data synchronized when the original backend resides within the firewall on the file server and the other needs to sit on the web server? OR ... is there another approach to allow data entry from both the internal users concurrently with data entry from the web. I'm scratching my head and my deadline is looming. Any advice is greatly appreciated.
View 3 Replies
View Related
Mar 26, 2007
I've read and gone though quite a few of the scrips and examples for creating logins and security and i'm getting to the stage when i need to have good understanding of the different methods.
Some of the examples whilst create a user login do not really allow for security within the database whilst the build in security wizard would appear to offer that functionality.
I am thinking that I will use the Workgroup file and that method. My question is am i able to utilise the fact that if a person 'AdamA' logs onto the database which is built into the workgroup security file. am I then able to take 'AdamA' to populate a table which records actions by a user? (I can't seem to find any thread or book reference to doing this)
View 4 Replies
View Related
May 5, 2005
hey there i want to make a MDE compression/compile but i get a msg that i cant compile a replication
how the f*** i remove the replication, cuz i no longer own the master file
View 1 Replies
View Related
Jun 28, 2005
I have replicated my Access 2002 database and moved a copy to my laptop. (on a wireless network) - so far so good.
Here's the problem l can replicate FROM my PC to my LAPTOP - GREAT !!!
I can't replicate the other way :confused:
My PC is running XP and my laptop is running 2000.
Does anyone have any ideas ? i have a feeling it is probably some security setting in XP but l'll be damned if l can find it.
Thanks
AndyB
View 8 Replies
View Related
Nov 1, 2005
Hi Guys,
I am working with a database that uses an autonumber Data Type in it's tables, this field is set to 'Replication ID'.
I am adding records to my table but for every record i add i need to retrieve the newly added primary key (which is the autonumber replication id).
If it was a incrementing id i could simply select the MAX value from the field. But seeing as it's a replication id it won't bring me back the latest field.
In SQL Server I would use the @@Identity function to return the id.
Can anyone help me?
thanks,
Dave
View 2 Replies
View Related
Dec 15, 2005
I am having multiple user problems with access 2000 quite frequently, and I thought that replication would solve this, as it stands however its proving difficult to get my hands on the developer edition, just wondering, is it worth the hassle to get it, or is there an effective alternative to replication?
View 6 Replies
View Related
Feb 9, 2006
Hi,
I've been reading about this alot today but can't decide for sure if I should replicate my database or not. The users will have a front end installed on their local drive and the back end is on a shared server.
Basically the users will not be able to add or delete records. However, they can update one column- its a checkbox that allows them to select a record or records in a continuous form. I imagine that if 2 users were using it simultanuously and one de-selected all the records, they would be deselected on the other persons form? This is why I think I need a partial replica. That way when the user opens the database they get a fresh copy of the new data and can select and deselect drawings without interfering with others.
All records are automatically selected when the form is opened so updating changes in the master is not an issue.
Please let me know if I'm on the right track here..
View 5 Replies
View Related
Apr 4, 2006
What are the thoughts of table replication. Can I reverse it.
View 1 Replies
View Related
Apr 27, 2006
I have a Design Master that I use for many replicas. I would like to replicate the design master so experimental changes to queries and tables can be conducted without exposing the "real design master" to errors? Each time I replicate/copy the design master the replica/copy will not allow changes. Is there a way to disassociate the copy/replica from the Design Master so experimental changes will be allowed and can be made?
thanks
View 2 Replies
View Related
Oct 31, 2006
Allrighty, some questions about replication. I have gotten the Replication Manager from the helpful IT folks here, have made the database, and it works well to synchronise between different files locally on this computer. However, ideally the other people in the department would be able to carry replicas around on their laptops, while ideally the design master and overall database tidying should sit on mine. The setup is typical intranet here - computers are invisible to one another directly, and so are their virtual My Documents drives, while shared network folders are visible to all.
Questions;
1. Since I can't see any of the other laptop drives, and the database would have to be accessible offline, I assume indirect synchronisation is the only choice, correct?
2. Does the Replication Manager need to be installed on each of the laptops that will use the database offline?
3. If yes, what's the process? Do I install RM on each laptop, then use the Create Replica function to create one locally on each? No hidden pitfalls here?
4. If yes, is it sufficient to keep RM shut all the time unless specifically wanting to synchronise? Would happen at least once a week.
5. If Replication Manager doesn't need to be installed on other laptops, how do I move replicas there? I tried moving one through copy/paste, but that broke the link to the Replication Manager.
6. (Optionally - I've seen some references to 'replica farms' - what is that?)
Very much appreciated if anyone is able to answer..
View 4 Replies
View Related
Nov 16, 2006
I created replication through Access, but when one of the users try to update a record he was getting the message Record deleted. So i search the internet and found that the solution of this error message was to Compact and Repair the database. When i did that i lost the replication, and now i can't create it back because there records on the database and i am getting an error message.
Any suggestions how to recover the database? By the way is the master database not one of the replicas.
Is replication causes these kinds of malfunctions?
View 6 Replies
View Related
Mar 2, 2007
Hello everyone.
Your help is very much appreciated.
I am trying to create partial replica from the design master.
it all goes well until I try to set the filter using:
repPartial.Filters.Append "Customers",jrFilterTypeTable,"Customers.Region = 'CA' "
It throws an error:
"Invalid expression in the ReplicaFilter property".
The replica db, does contain "Customers" table, which has "Region" field.
Thank you for you help.
The code, looks like:
dim repFull as new JRO.Replica
repFull.ActiveConnection = "C:Program FilesMicrosoft OfficeOFFICE11SAMPLESorthwind.mdb"
Call repFull.CreateReplica("C:MY_REPLICA.mdb", "description", jrRepTypePartial)
Set repFull = Nothing
' open the partial replica in exclusive mode and apply filters
repPartial.ActiveConnection = "Data Source=C:MY_REPLICA.mdb; Mode=Share Exclusive"
repPartial.Filters.Append "Customers", jrFilterTypeTable, "Customers.Region like 'CA' "
Cheers
Roy
View 4 Replies
View Related
Mar 22, 2007
Hello there, :cool:I was wondering here, is there a way to replicate splitted database programmatically? If this not possible, what would you suggest in this case? All advices are mostly welcome and well approciated at all costs. :)
View 6 Replies
View Related
Apr 10, 2007
Hi everyone, does anyone know how to remove the little replication icons next to the db objects when a replica is converted back to a design master. I know there is a way cos i've seen it here before but I can't find it searching. Thanks.
View 2 Replies
View Related
Dec 26, 2007
Hi there,
Would anyone know an easy way to save a database to 2 different places automatically when shut down.
Regards Ben
View 3 Replies
View Related
Jul 31, 2006
I am trying to create a documentation DB with extensive lists of documents, text, numbering schema, titles, owners list, and much more info. I created a Master DB on my laptop and did a replica on the sharedrive. Now I am having many problems with the replication of my tables, queries etc. All my reports have the replication icon next to them and I cannot modify them. How do I fix this problem? I am a novice at creating DBs. I did take a level 1 course but we did not discuss these kinds of issues. Any help would be appreciated. Thanks.....
View 2 Replies
View Related
Jul 8, 2007
Hi All,
Can anyone tell me what is the data type to be used for the replication ID of a query parameter? I want to retrieve values from a table where the ID is the replication ID but I dont know what is the data type to be used for my query parameter.
Can anyone help me out? Thanks.
View 1 Replies
View Related
Jul 27, 2005
I have posted on a couple of other sites and have not had an answer in two days on a replicated database question. Is this a taboo subject, or is there just not a lot known about it?
I have a FE/BE Database that has 25 users. Two of these users moved offsite and are having huge speed issues. What I have gotten out of my research is the best thing to do is create a replica of the backend and transfer that replica to the offsite agents pc. This way everything is on their C drive instead of the BE being on the network and the only speed issues they will have is when they synchronize the replica w/ the backend.
Here is my problem. How do I create a button on the FE of the Database that will cause the BE on their PC to synchronize with the Design Master BE on the network?
I have a limited understanding of VBA.
Any Help would be appreciated.
Thanks,
View 3 Replies
View Related
Jan 3, 2006
Hey, Happy New Year to all.
I have a replicated access database, and I want to move the design master to another computer. I have tried using the Windows 'Copy and paste' command, and the 'Save as' command, both result in creating a replicated database.
I have also tried chnging the design master status to a replicated database, but then I am unable to view any VB code behind the controls when I go to design view.
Can you help?!!!
Cheers, Adam.
View 2 Replies
View Related
Sep 14, 2006
I decided to learn about replication today and I made a master database.
To my surprise, I noticed the records in the tables in the Master version are not in the same order as the original version. The records are now in random order but before they were in the order of entry.
Now i have to create new queries for all the forms that have a table as a record source just to get the record ordering right.
I want to know how reliable is Access Replication and should I expect a lot more suprises like this. Is replication more trouble than it's worth?
View 2 Replies
View Related
Aug 20, 2013
I have 2,000 access databases that are structured the same way. I want to import and compile 1 of the tables from the databases into excel. I have a macro written that does this no problem, but I just realized it is not importing Number fields with field size of "Replication ID". This is critical to eventual be able to do the analysis I am looking to do. Is there any way to have excel import the Replication ID?
View 3 Replies
View Related
May 22, 2014
I have a database with 8 tables. When I create a replica, one of the tables (only one) in the replica gets modified such that Data Type for all the fields is Calculated, with the effect that the data cannot be changed by the user. The table design is not changed in the Master. What the heck? Of course the table design cannot be modified in the Replica, and there's no reason to modify it in the Master. A second replica on a different server had the same result.
View 2 Replies
View Related
