Hi guys, I have this report that on the detail part can be 1 or 10 records, but I need to do this report autocenter verticaly no matter how many record was insert.
Top margin will be 6( set it to fit 10 records on the same page) but if i enter 5 record, i need the top margin to be 10 or so.
Is that possible
Thanks a lot
Hi,
I have a rather simplistic problem that I can't find a solution to! I have a
form that I want to maximize every time it opens (which I have achieved
through DoCmd.Maximize in the Form_Load event), but I also want that all the
controls in the form, staying positioned relative to each other, center
themselves horizontally on the form once it is resized. Maybe I can set a
property that always makes them stay in the horizontal center, which is also
great. How could I accomplish this?
Thank you!
Kriti
Does the MS Access Report support Hide/Show specific fields according to parameters or even by click?
View 3 Replies View RelatedI'v looking for since a couple months a go to make a report direct from access form using crystal report but i havent found it yet. I'v tried this code and its giving me errors. " run time error 1004 method range of object _global failed "
how to make a report using crystal report direct from ms access as front end application ? is it possible to use crystal report ?btw i use database sql server 2008 and MS Access 2007 as my frontend application.here's the code that i'v found and gives me an error
Dim CR As New CRAXDRT.Application
Dim rep As CRAXDRT.Report
Set rep = CR.OpenReport(Range(" ??? ")) * i getting error in this line, what should i do to fill it ??
rep.ParameterFields(1).AddCurrentValue "Boston"
rep.ParameterFields(2).AddCurrentValue "Cars"
rep.Database.Tables(1).SetLogOnInfo "tool", "db_tsel"
rep.ReadRecords
rep.PrintOut promptUser:=False, numberOfCopy:=1 ' promptUser:=True doesn't work
I have a form with 7 List boxes linked to 7 Query's which in turn are linked to a table. Each list box if for a particular trade.
I am trying to select a person or persons from each List box and then have them sent to a report. I have Code to do one list box, but do not know how to link all boxes with code to a 'Open report' button.
The code I am using is as follows:-
Private Sub cmdOpenReport_Click()
On Error GoTo Err_cmdOpenReport_Click
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
'make sure a selection has been made
[code]....
The aim of what I am doing is to create a monthly statement to give to our intermediaries that shows the commission they will receive each month for the deals they have referred. I have managed to create this report, HOWEVER I can't figure out how to filter out which month I need, so I a report for Jan, Feb Mar etc... The idea is that at the end of each month I need to run the report so only the latest month shows...
View 3 Replies View RelatedI have a report which programmatically sets the value of some labels based on its own internal logic for each line of the detail section of a report. This all works fine and dandy, using the Detail_format event, and accessing detail.controls.item(x).caption.
HOWEVER, when I then embed the report as a subreport (which I need to do), I goes wrong. Here, I get the values of the last row of the detail repeated in every previous one. I'm suspecting because the parent report has its own 'detail' (I've tried giving the subreport its own distinct detail name).
How do I hide the report footer based on the report's data ?
I'm trying to hide if number of users = 1
The report's data is a query built inside the report's RecordSource, not a self standing query.
I've done this once entirely by accident and can't seem to duplicate it...
I have a report. It has the following:
Report Header: Logo and title
Department Header
Supervisor Header
Group Header
Detail
Department Footer: Totals
Report Footer: Overall Totals for all departments
Here's my question.
I have combo boxes on my main form that filter this report. The combo boxes are referred to by the query that runs the report. How do I get proper unfiltered overall totals in my report footer?
I have a report that displays incidents, their details, consequences and a photo. Among the details is a severity rating high medium or low, I have been asked to make the report shorten the records which have been given a low severity (because it takes up as much space as the more important/severe ones).
The only method I can think of is to use the onformat event, to shrink and make invisible all the fields that I don't want to see if the severity field shows 'low'.
We have a shift log that includes both personnel actions during any given day as well as operational actions. (We recently switched from a word document to an Access Database to allow multiple users to input events while another has the logbook open already (which you couldn't do with Word))
At the beginning of each day, my manager reviews the previous days log and forwards up pertinent data (some personnel, some operational) to our higher authorities. Is there a way to allow him to select which records he'd like to include on that higher-authorities report straight from the local-level report?
I'm not a fan of allowing him a "Save As" feature because that kind of defeats the data integrity purpose of an events log where he could save as an RTF and then edit any of the log entries without any checks or balances.
I have an odd thing happening with my reports. There is a main report that gives class information (from query). There are two subreports (from queries also ) with scores (one for each type of test). There are some unbound controls on the main form that display a count of how many scores are recorded which are totals from the subreports. The controls all report the correct numbers however, when I scroll down to view each record, some of them change to #error, or #name, or similar for a moment. Sometimes they will stay in error form when I stop scrolling but change to correct if I scroll up just a bit. Is this because the controls won't calculate unless that report record has focus?
View 1 Replies View RelatedI have a three-column query that tells me how many hours I have available per week for a given resource type (e.g. welders). I have a second three-column query that tells me how many hours of work I have planned per week for a given resource type.I'm hoping to produce a query (the source for a report) that will show resource types in rows and twelve months in 24 columns. the first column for each month will show how many hours I have available for all my resources, the second column for each month will show how many hours I have allocated.
How do I produce a query that will combine the other two queries, inserting zeroes where necessary considering that for any given week I might have allocated work to a resource that isn't available (because the inconsiderate buggers think they are entitled to holiday) or I might have a resource that has no work allocated (because I'm incompetent)?
Is there a way to hide a label on a report if the sub report count is 0?
View 2 Replies View RelatedI have an asset data base to generate individual asset detail reports with a sub report on the same page listing similar assets from a separate query. I have set the master and child fields, one to many. This works perfectly for the first two assets (pages), however the sub report stops showing data on the third asset (page).
View 13 Replies View RelatedHi,
Can you tell me if it is possible to create a main report with a Portrait view and then add a sub report to the main report and print this out in landscape mode. If you can please can you advise on the best way to do this. Thanks PWF
So I have a text box in a report that I want to pull in data from a field in another report, so the 'control' for my text box looks something like this...
=[Reports]![rptSalesReceiptSub]![Text141] (i.e Text141 is the data I want to pull into my report)
...the path is completely correct but when I run my report I get.#Name? If I run the report that has the data I want, it's fine (in other words Text141 has valid data in it)
I am wondering if it is possible to send a report as xls file and keep the format exactly as the report looks.When I try to send it now, it automatically changes back to the column names from the table, which I in the report have changed and want to keep in my excel output!
View 3 Replies View RelatedOn this form, there is a text box for Quantity...At the end of the form, there will be a button that when pressed:The current record the data on the form is entered for is saved,A report is printed on a specific printer,I do not want the report to actual display,The number of copies it prints should be equal to what the quantity field indicates.I do have the report already created and the Quantity field is on the report (just not visible).Once this all happens, it should return the user to the form, that is blank, waiting for a new record entry.
View 1 Replies View RelatedThe company I work for has branches in multiple states and we use Access to organize all their tax requirements. We print out reports for every month, and my company would like to create a pop-up window that will let us filter the report when it starts up so that it automatically shows only the dates that we wish it to. How do I create a filter that pops-up when the report starts?
View 1 Replies View RelatedI have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
Code:
Me.txtAddrMainLine2 = "NAME " & UCase([Forms]![frm_OrderRx].[txtPatientName])
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
In Access 2010, I have a simple sub-report I use to count a field. Works perfect by itself. However, when I place it in the main report the results change. And it doesn't matter where I place it in the Main report, it still returns a low count. Is there some filter I am missing?
View 5 Replies View RelatedI am looking to call two different queries from report wizard to produce report. Getting error message what to do in this situation as both queries are important as i have to pick all records from query A and just one record from query B any other option to get this in report.
View 4 Replies View RelatedIs it possible to opena report from a report - ie launch the code form the Report1 Module to open report2 module - for print of bothe reports.
I have treid buit it doesn't seem to like it get error 2046.
Hi,
I've been given an existing database to modify, and I'm struggling somewhat to see how the author has implemented certain functions.
On a main menu form (autoexecs on starting the database), there are various "Search By" option buttons to generate a report, ordered in various ways. The "On Click" field for each of them refers to a macro, called Buttons, and a line in that macro dependant on the type of search (e.g. OnClick = Buttons.byPerson).
The Buttons macro runs an OpenReport command, the report corresponding to the search type (e.g. Buttons.byPerson has an OpenReport command for the "Report by Person" report).
However, when I click the search buttons (or indeed run the corresponding reports) I instead get another form which allows the search criteria to be specified - this then generates the report (I would assume based on the relevant query - e.g. Person Query), but I cannot understand how this works.
Google searches have not helped much as I can't seem to find an adequate search phrase to use, and I've been staring at the thing for some hours now. Any help getting me off in the right direction would be much appreciated!
Hello,
I have a report with a lot of rows, depend on the data entered in a form i mask the last rows (with fonction .visible=false) the problem is that a second blank form is printed, so i tried in the report to change width using me.width=15000 but the report width doesn't change.
(i tried in open and activate section)
Is there a solution ?
Thanks in advance.