Report Columns
Mar 22, 2005Is there any way to make the details in a report appear in repeating columns (say, 3 columns) instead of in rows? It appears as though there's a way, but I can't seem to figure it out......Thanks
View Replies
ADVERTISEMENT
Report - Columns Within Fields?
Nov 21, 2006I'm new to access, so any help is greatly apprciated. Is there a way to have one field within a report show up as 2 columns? Thanks much!
View 2 Replies View RelatedExpand Data Columns In Report?
Jan 13, 2005Hi
I have a report with a column of data. It contains a variable amount of data according to the demand of the user (criteria entered in a parameter query). The problem I have is that the data is short string of 3 letters but there are generaly lots of entries so the report runs over several pages. I would like to be able to creat columns side by side. A bit like with the "Can grow" option" but that a new column appears...
I am not sure I am clear...
Many thanx for your help
Reports :: SUM Multiple Columns On A Report?
Aug 5, 2013I can't seem to find a way to SUM two seperate columns on my report. I've attached an example of what I am talking about. I was able to add the SUM feature to the 'Estimate' column, but it doesn't allow me to add that to the 'Plan' column too. The only options available are Count Records or Count Value.how I can have these both SUM seperately within their columns?
View 5 Replies View RelatedReport With Unique Fields As Columns
Apr 24, 2014I have a large query that has information from accounts sorted by date, account repeat but they are always associated with a different date. I'd like to create a report where each date has it's own column with an associated field displayed as the information in the column. However, as data is added to the table I'd prefer to do it without having to make a query to filter each date each time information is added.
The information is added in bulk with all the same dates, so ALL accounts (excluding newly opened accounts that may have no information with a certain date) should have information for each date - there will not be single accounts with their own date. For example: An account numbered 12345 with data of 57% on 1/2/13, 63% on 6/2/13, and 89% on 12/2/13. I'd like each of the dates to have their own column, with the account numbers as the row and the percent data to show under the date they are associated with. how to manage this in a report, or if it is possible.
Reports :: Newspaper Columns In Report View
Nov 12, 2013How to turn a single long (page spanning) column of data into "snaking columns" or "newspaper-style columns," but all of the results are only available in Print or Print Preview. I am looking for a way to have the correct, multi-column, result visible in Report View on the screen.
The reports I am formatting will not be printed onto paper; they will be seen only on screen. The data will vary depending on the source table, some have records that are about 200 records long, and others are only 50 or so. The number of columns across the page will need to be dynamic depending the total number of records the report pulls in.
Reports :: Not All Columns In Report Will Display Or Print
Apr 1, 2013I am having trouble getting all columns in an Access 2007 report to show up in report view as well as to print. It seems like this is mostly occurring in columns that occupy the center of the report.
View 1 Replies View RelatedReports :: Report That Displays 3 Different Columns Of Numbers
Aug 22, 2013I have a report that displays 3 different columns of numbers.. and when I try to do a total for any one of the columns the sum option is greyed out and I cannot total any of the columns at the bottom of the report. Everything I have read says I should be able to do that.
View 5 Replies View RelatedReports :: Change Number Of Columns In A Report
Oct 24, 2013I have a report that constists of 4 subreports.I need the first two subreports to render in a two-column format and the 3. and 4. in a single column format.Unfortunatelly I cannot it work as I need to.I have read, that setting the main report in a single-column format and the subreports in a two-column format with "first across then down" setting (Or something like that) is and option.
Unfortunately this option does not fit my requirements.Is there a possibility to set the number of columns through VBA and change it across the different parts of the report?
Reports :: Display 50 Records In A Report Field In Two Columns Of 25
Nov 9, 2013How to display in a report a field with 50 records in two separate columns of 25 records.Is this possible or am I completely off the reservation?
View 2 Replies View RelatedReports :: How To Arrange Columns In A Report (visible / Invisible)
Apr 17, 2015I've accomplished some simpler things like hiding fields based on the data in another field but nothing very complex. To the point: I have a report that shows data in both rows and columns, the report has a 7 columns, 3 of which could or could not contain data other than zero, in which case the column is not displayed. The problem I have is that it could be any of those three at any given time depending on what data is available for that report and what the user wants to see. Basically, if a given company has no data regarding column "A", then column A is hidden, but the main grouping is done through rows so all companies contain at least 0 for all columns (what I did is that, if a field sums the whole column returns 0, then the column is not visible). What I need to get working is the second part of this, have the columns rearrange themselves depending on which column is hidden (it could be that all 3 are hidden). How could I make this work? (btw, autoshrink is not usefull for this since it only shrinks vertically, not horizontally).
View 9 Replies View RelatedReports :: Eliminate Whitespace For Hidden Report Columns
Aug 20, 2013I have a large tabular report, 22" and 18 columns. In the report footer I have for each column a series of calculated fields, specific to that column. For example, one of my columns is NumberofCreditsEarned. The calculated fields at the bottom of it are min, max and avg. Another one is Gender, and the calculated fields at the bottom of that one count the males and females and give percentages of each.
I designed a basic form with 18 checkboxes, so users could select as many or as few columns as they want. My original idea was to use the checkboxes to show the desired columns (along with the calculations for those columns) and hide the rest.
The issue is that while the column may be hidden, the white space is not. If I can't find a way to get rid of it, my reporting tool won't be feasible to use. I've researched using "can grow" and "can shrink", but I dont think they'd work on a tabular report like this, where all of the controls are the same height and width, and on the same line.
Reports :: Crosstab Report With Dynamic Number Of Columns?
Mar 21, 2015I've made a crosstab query and would like to use it to create a subreport. In the column headers I have names of courses. Courses can be added or removed. How can I make a crosstab report with dynamic columns?
PHP Code:
TRANSFORMÂ Count(tblCourses.CourseName)Â ASÂ CountOfCourseName
SELECT tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,Â
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
FROM tblNmscStaff LEFT JOIN (tblCourses RIGHT JOIN [tblNmscStaff/CoursesPointer] ONÂ
tblCourses.CourseIDÂ =Â [tblNmscStaff/CoursesPointer].CourseID)Â ONÂ
tblNmscStaff.NmscStaffIDÂ =Â [tblNmscStaff/CoursesPointer].NmscStaffID
GROUP BY tblNmscStaff.NmscStaffFirstName, tblNmscStaff.NmscStaffLastName,Â
tblNmscStaff.PtOrFtNtl, tblNmscStaff.Ntl, tblNmscStaff.NmscID
PIVOTÂ tblCourses.CourseName;Â
Reports :: Cross Tab Report Versus Dynamic Columns
Apr 22, 2014I have made a cross-tab query which works fine. I also have made a report which is based on this cross-tab query. Due to nature of the cross-tab query the Value column(s) is dynamic. The report I made is based on all available data types (columns). The report works if all data type is available but the report fails if some of the data types are not available (i.e columns are missing due to not having any value or data). I hope I am explaining this correctly,
Is there a way I can use expressions in the report to place a conditional clause that if the Control Source doesn't exist place a Null or 0 in the report or in its place.
Queries :: Sort Crosstab Query Columns And Generate Report
Jul 28, 2015This is a query, report and vba question. I'm using Ms Access 2007.
TABLE 1: projectname, activityname, totalhoursworked, employeename
TABLE 2: employeename, employeelevel
TABLE 3: employeelevel, rate
I created a select query to join the info that I need.
SELECT QUERY 1: projectname, activityname, employeename, totalhoursworked, rate, cost (calculated field (totalhoursworked*rate))
I have 2 crosstab queries.
CROSSTAB QRY 1: ROW (projectname, activityname) COLUMN (employeename) VALUE (totalhoursworked (summed))
CROSSTAB QRY 2: ROW (projectname, activityname) COLUMN (employeename) VALUE (cost (summed))
I then created a 2nd select query with inner joins to join both crosstab queries on similar fields (activity & projectname).
SELECT QUERY 2: projectname, activityname, employeename (totalhoursworked as value), employeename (calculatedcost as value)
It gives me this:
However, I want it like this:
Those employeename... refers to more employees being added after a period of time. Hence I want to know if I could use vba to generate a report every time a button is pressed on a form? I know how to link the form to the query.
Reports :: Adding Another Field In Report To Show Percentage Of Two Columns
Sep 2, 2014I have two collums, currentowed and currentpaid. i want to add another field to my report showing the percent of currentpaid to currentowed but I can't seem to be able to make it work. I tried:
=sum([currentpaid]/[currentowed]) and it doesn't work.
Modules & VBA :: Union All Query - Transposing Columns To Rows With Variable Columns?
Aug 8, 2013I was able to use the UNION ALL qry. But, when I have another file (like original2) that does NOT have all the columns listed in the UNION ALL qry, I get a Parameter value box asking for the missing columns when I run the qry.
Example:
original1IDDateGroupChristianJohnnySteve 18/5/2013A1528/5/2013B338/5/2013C2348/5/2013D2358/5/2013E5
original 2IDDateGroupChristianJohnny18/6/2013A212528/6/2013B2338/6/2013C2248/6/2013D22
The UNION ALL qry includes all the possible resources ( includes all the possible column fields Christan, Johnny, and Steve).
When I run the UNION ALL qry with the original2 file, An "Enter Parameter Value" box is displayed with the mssing column name "Steve".
Is there a way to Map the original2 table into a working table with all the columns, or use VBA code to construct the UNION ALL qry to only include the existing columns? My data has variable columns and I'm trying to avoid the parameter popups.
Queries :: Consolidate Multiple Columns Into Two Columns
May 14, 2014I have a MS ACCESS 2010 database with a data table which i am trying to create a query from. I have 6 columns of data( one with an ID Field and 5 Name Fields). Below i have made examples of how it first appears as a simple query and the second will show you what i would like it to look like.
What the simple query looks like: [URL] ...
Second what I want the query to look like: [URL] ....
How Do I: Sum Of Selected Columns & Linking Columns
Oct 30, 2007Currently I'm building tables and forms. My first table (called Clients) lists the details of fictional clients. My second table is for invoices.
In my invoices table, I wish to link the column for client reference (note: stored in the Clients table) to the column that precedes it. This column will list the clients’ names and is selected from a drop down list that is linked to the Clients table.
What I want to do (if its possible) is to have the respective client ref. automatically show up in the next cell once I've selected the client to whom the invoice relates?
Am I making sense? Is that possible? If so, how do I do it?
Secondly, how do I do a sum of selected columns for my “totals” column? Basically, I want to add the figures found in several cells that precede it?
Totalling Columns & Rows Into Columns
Mar 22, 2007I'm affraid my confusing topic title is an indicator of how confused I am by this. I can't even understand the variables well enough to fully utilize Access Help or the Search function here...
What I have is a database hat has column headers that look something like this:
Customer_Name, Order_Date, Qty_Ord, Unit_Price, Total_Price
What I'm trying to get is a query output that will have
Customer_Name, Total Orders (in Dollars) for January, Total Orders (in Dollars) for February, Total Orders (in Dollars) for March, etc.
I've been able to set it up to SUM for one month, but not multiples.
I know I'm totally lame (for proof read any of my previous posts) but you guys totally bailed me out the other time I asked a lame question.
Thanks in advance!
Converting Rows To Columns And Columns To Rows
Jul 31, 2013I am trying to convert a table that looks like the following...
Customer Name SumofSum of Bill Rate Reviewer
000462 John 500 Mike
000224 Mike 900 Jeff
I would like to covert it to....
Customer 000462 000224
Name John Bill
SumOfSum.. 500 900
Reviewer Mike Jeff
I don't think Access has any functions for this but I am not 100% sure. I know this can be done in a Module but I am not sure of how to code it.
Add Two Columns....
Feb 19, 2008Hi All,
I have a Append query which has columns from two tables. Now i need to create a new column "Sum" in new table which should Add two of the Number columns .
That is : I have column A and Column B; I need to create a Column C which contains (A+B)
Please advise.
Thanks,
Kon
Columns Not Saving Where I Placed Them.
Jan 24, 2007Hi,
I'm new at access but getting the swing of it. It is a pretty cool toy.
I have a table that I am adding various columns of data. Once added I move the columns to where I want them to be. I am hitting the little save disk on the top toolbar but when I reopen the file the columns are not where I placed them. I'm not sure why this is happening. Any thoughts?
Thanks in advance for your help.
Eddie.
Inserting Columns
Dec 30, 2004i am working on my company's database which is in access 97, and has a backend. the normal entry way when you add a column it wont save as it says it can't save propertys to a linked table. i added the required fields to the backend without any problems and saved and exited. now when i go into the "frontend" the fields arn't showing up on the table. any ideas?
thanks
briar
Merging Columns
May 6, 2006Hi I have search the forums for an answer to this..i have 4 fields address 1, 2,3,4 and i would just like to all all the information to one field call address..how can i merge the information..please bear in mind i am useless at access..i thought there might be a way of copying the columns and just having a merge function to do so ..but cant find anything...please help..Williebear:(
View 4 Replies View RelatedLookup Columns
Aug 22, 2006Hello again!
How do I prevent the information in lookup columns from showing up in other tables, queries, etc... as numbers.
Example.
Lookup to Fruits. Where the records for fruits are Apple, Banana, Orange, and Pear.
The lookup column lists all the items {Apple, Banana, Orange...}, but in queries the data just appears as numbers {1, 2, 3}.
Many thanks for anyone's help in advance!