Report - Show Only Fields That Have Values Above 0
Mar 8, 2005
I am trying to generate a report, or even a word merge doc, that will print only the fields containing values above "0". I have to print a one page benefits report for each employee, yet not everyone has values in each available field. On each report, I only want to show the fields that actually pertain to the employee. Is this possible?
I have tried doing this as a Word merge, but the field names do not show up, only the values...I have been struggling with this for over a day...please help!
I am very new to access. I have made a database that holds certain company information.
As part of a process a company must fill in and complete form and send to me and once they have I enter a 'yes' to the form and then link directly to said form.
I am wanting to be able to run a report to be able to only see the companies where a certain field has not been filled in.
For example I have a field for doc 698, if I have had this form back I enter a yes in this field, if I havent had this back I leave it blank and these blanks are what I want to pull off in the report.
I have made queries and then just filtered to show blanks but I would like to have in report form.
I have a report based on a query. Sometimes some of the fields on the report are blank because the information is not available. Is there a way to not show the blank fields on the report and to move the next field up into the space?
I have tried using Is Not Null on the query criteria but if any one field is null it doesn't show any of the others on the report.
I have currently got it so that the height is set to 0 and can shrink = yes and this seems to work but the field is still there (although hidden) - I would rather it was removed completely if it is blank as I am hoping eventually to make the output for each field show on a PowerPoint presentation and I don't want blank slides which I think this solution might do??
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are: VehicleReading PreviousReading VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers, = [VehicleReading]-[PreviousReading]
And also a calculated field named Consumption, =[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail. I have tried copying the syntax suggested by the Expression builder:
Suppose we have a report that outlines several fields, one field shows the City. In the report, this week, we see 10 records "New York", 8 records "Houston", 7 records "London", 3 records "Paris" and so on.
Next week's report outlines different cities and different number of records. I need to have in the report footer a "recapitulation" , a field that would say :
New York 10 Houston 8 London 7 Paris 3
Total 28
Next week cities and number of records might not be the same, we may have
Tokyo 12 Singapore 14 New York 6 London 7
Can i make my report in that way that it will count the values without using VBA ? I tried the count values option but it counts the overall report, does not take into consideration the different values.
The aim of what I am doing is to create a monthly statement to give to our intermediaries that shows the commission they will receive each month for the deals they have referred. I have managed to create this report, HOWEVER I can't figure out how to filter out which month I need, so I a report for Jan, Feb Mar etc... The idea is that at the end of each month I need to run the report so only the latest month shows...
I have a report in which a textbox generates numerical values and letter values. I want to...On report load - if textbox = numbers then hide otherwise show if it contains letter values.
I have searched similar posts to solve this, but havn't been able to make it work yet, so apologies if this sounds like an existing post.
On my form (frmContacts) I have a combo box (LstCompany) that lists companies. The default value is set to "N" (so this is the value when nothing is selected).
I have a query (qryContacts) that retrieves records of People and their Companies from a single table (tblContacts - this table includes the fields 'Person' and 'Company'. Some people have no company). I want this query to:
- When no company is selected in LstCompany: show all people (whether or not they have a company). - When a company is selected in LstCompany: show records for that company.
I have added the following expression to my query: Expr1: IIf(([Forms]![frmContacts]![LstCompany])="N",True,([Forms]![frmContacts]![LstCompany]))
Criteria = True
This works fine for showing all records, but the Expr1 field returns #Error if a Company is selected.
Any idea what I am doing wrong, or what will work?
How do I get the second filter to show all the values and allow me to check which ones I would like to select? I cant seem to recall how to do this. I remember having to do it a while back.
So I have a multi-select listbox with tick boxes and values in on my form. Is it possible to make so only the checked values are showing up and then not display the tick box?
I know I can use a combo box to display several values, but using a listbox like this would be easier on the eye.
Is it possible to use code to get a text box to show the selected items in the list box?
In the attached Database, I have four tables. The purpose of the Database is to track training for employees. A quick description of each table:
Employees: List of employees requiring training Course List: List of Courses offered Course Schedule: When said courses are offered (one to many relationship with Course List). this has a Composite Primary key consisting of the Course Number and Section Number Course Attendance: This is to track which employees attended which class.
Question 1: In the Course Attendance table, the first field (SOS Course Number) looks to the Course Schedule table. This field uses a lookup to select the course and section number, but only displays the course number. How do I get it to also display both the course and section number (don't care if it is displayed in one or two columns)?
Question 2: Similar problem, except the second field is Employee Last Name which is a lookup from the Employee table. I want to display both last and first name in two separate columns.
Note, I realize there are spaces in table and field names. Please ignore this for now. It will be fixed later.
Hi, I have a popup form called Labor that is working perfectly fine, what i mean is that it is getting populated with data from the query I built using a single table called PrimaryBid_Master. However I have had to add many fields to this table before invoking a query on it, now I'm running close to the 255 field max limitation. So I have created a new table called Labor_Primary with all the fields that I need and took them out of the PrimaryBid_Master table freeing up about 50 fields.
The query I made combines 2 tables: table1=PrimaryBid_Master table2=Labor_Primary, they are linked by a common field called invoice#. But now when I’m in the PrimaryBid_Master form and click the command button to go to the popup form Labor non of the values that were populating the popup form from the primaryBid_Master form work, they were working fine the only thing I changed was the popup forms record source to the new query I built. Here is a print screen of the new query I built using 2 tables, and I also show the old query that works fine using 1 table. http://www.roofmart.net/query1.asp
Maybe you can see some thing I did wrong; do I need some type of filter to fetch the fields? When I open the new query there is no data/values in it.
Hi, This query will allow me to view payments that are made between 2 dates. I would like to know how to flip the query around so that it gives me the payments that have not been made. I think this would be described as returning the null values?
The SQL code i have at the momnet is: SELECT download20060602.Date, download20060602.Description, download20060602.Amount, Members.FirstName, Members.[Mid Name], Members.Surname, Members.[Memb No] FROM Members LEFT JOIN download20060602 ON Members.description = download20060602.Description WHERE (((download20060602.Date) Between [Enter Start Date] And [Enter End Date]));
I've used this guide [URL] .... to only show unique values in a combo box. I can't get it to work, it just shows a load of blank values. If I run the expression builder part from the background, it works but it doesn't work in the combo box. Not sure what I can post to give more details?
I have created a table (data entered/selected via a form) which includes a drop down box, for 'Ethnicity' to pick a value from another table (ie used Lookup wizard to for options from another table).
The row source looks like this:
SELECT [Lookup_Tbl_ethnicity].[Code], [Lookup_Tbl_ethnicity].[Category], [Lookup_Tbl_ethnicity].[Sub-category] FROM Lookup_Tbl_ethnicity ORDER BY [Code];
Setting the ORDER BY [Code] displays the options in the drop down box in the correct sensible order.
The 'Bound Column' is column 3 - Sub-category. I assumed that this would be the 'value' stored, searched and displayed... but the table (and related form) display the Code.
how to change this so that the Sub-category is displayed?
I am creating a small database to house results of certain tests. Is there a function in access that allows me to add fields if a result is out of the specification required. In other words I still need to record the out of spec results but I also need more fields to appear for the next lot of results to be entered, for example.
When cooking a batch of product I need to test the pH at the 30 minute mark if the pH is too low I will continue cooking the product for another 30 minutes and then test the product again. The cook time is not a constant so I never know how many samples are required, therefore I don't know how many fields i would need in advanced.
I have duplicate data in a cell, I want to hide duplicate data and display only non-duplicate data.. I changed the property sheet to only show unique values, but it keeps showing data I don't want to see...
I have an unbound combo box with three columns, which get the values from a query. The first column is hidden. When I close the combo box after my selection, only the second column value is shown on the box. Is there any way that both the second and third column being shown on the box after selection?
A query based form is used for tracking the different EVENTS, LODGING data, EMPLOYEE personal data and FAMILY members. I'd like to creat a combo box that shows only the events that the employee attended, not all the events in the EVENT_JUNCTION tbl.
WasteCategory WasteCategoryIDPK WasteCategory [H, N, U, etc]
I'd like to query the line items for each manifest so the end result has the manifest number (Manifest #0001) in a field and the designations (N, H, P, U) in fields on a report.
I have a Form with multiple comboboxes and listboxes whose selections are assembled into a query. The combo-box selection goes into an IF-ELSE statement for a selection check (IsNull) and if there is no selection made, it is supposed give me all values (Blanks & Non Blanks)
Here is a sample of my code:
Code: If IsNull(Me.cbReg.Value) Then RegStrng = " Like '*'" Else RegStrng = Me.cbReg.Value RegStrng = "= " & RegStrng End If
I have several If-Else statements here and a final query assembly at the bottom of the code page which is as follows
Code: MasterSql = "SELECT DISTINCT blah-blah-blah" & _ " INTO some more blah-blah" & _ " FROM even more blah-blah-blah" & _ " WHERE dbo_mytable.[Reg#]" & RegStrng & _ " AND the results from other If-Else statements similar to above"
Here is where the problem comes in:
I see the mistake in my If-Else statement
Code: If IsNull(Me.cbReg.Value) Then RegStrng = " Like '*'"
Like * means it will show me all rows where there are NON-Blanks. However, it skips all Blank Data.
What should the If IsNull() statement look like if I want to show all the values?
If there was only one combo-box and there was no selection made, then the resultant query should show me all results rather than only the results where there is some sort of data within the column filtered by the combobox.
