Report, Subreport, Query, Fieldname
Mar 5, 2006
I have a report named rpt100 with two subreports srpt100a and srpt100b. The subreports are based on query qry100a and qry100b. Both queries are based on tbl100. I removed a field named 'Comment' from tbl100, as it wasn't useful; Also removed the fieldname from both qry100a and qry100b. When opening rpt100 a parameter dialog opens asking for data on the deleted fieldname 'Comment'. The field 'Comment' was never used in the report or subreports.
Inspection of the subreport fieldlist shows field 'Comment' still present.
How, other than remaking the rpt100 and both srpt100a and srpt100b, do I remove the field 'Comment'?
Gunner...:confused:
View Replies
ADVERTISEMENT
Jun 26, 2015
I have got a query which gives me the following output;
Nr ----------- area ------- area 2 ---------- holler
14-1096-------1------------1-----------------5.9
14-1097-------2------------2-----------------7.8
14-1100-------1------------1-----------------13.4
14-1101-------2------------2-----------------7.8
What i would like to do is to calculate the sum of holler when they are in the same area.So the sum of nr 14-1096 + 14-1100 and 14-1097 + 14-1101. Ive tried to do the following;I tried to do the following just to check it would even work;
Code:
test: (SELECT Sum([holler]) FROM querytoetsn2hr_gemiddelde_filter WHERE ((querytoetsn2hr_gemiddelde_filter.area)=("1")))
Which worked perfectly, it gave me 19.3..
Code:
test: (SELECT Sum([holler]) FROM querytoetsn2hr_gemiddelde_filter WHERE ((querytoetsn2hr_gemiddelde_filter.area)=(querytoetsn2hr_gemiddelde_filter.area2)))
That gave me the sum of all 4 the Nrs. Which makes sense, because you basically say that as long as area and area are the same calculate the sum of holler.if there is a way to say "sum of holler when area has the same value".
View 2 Replies
View Related
Jun 26, 2013
I have a report which programmatically sets the value of some labels based on its own internal logic for each line of the detail section of a report. This all works fine and dandy, using the Detail_format event, and accessing detail.controls.item(x).caption.
HOWEVER, when I then embed the report as a subreport (which I need to do), I goes wrong. Here, I get the values of the last row of the detail repeated in every previous one. I'm suspecting because the parent report has its own 'detail' (I've tried giving the subreport its own distinct detail name).
View 1 Replies
View Related
Jun 15, 2005
I have a Report linked with a SubReport. I would like to cancel viewing this Report if my SubReport Has No Data.
i tried this code but the report just shows up. Any Ideas?
Private Sub Report_Open(Cancel As Integer)
On Error GoTo Err_Trapper
If Reports![qryRepCurOrgProjsSR].Report.HasData = 0 Then
Cancel = True
End If
Err_Trapper:
MsgBox Err.Description
Exit Sub
End Sub
Ok i got an error message. Yoy entered an expression that has an invalid Reference to the hasData property.
Ive tried using a text bpx on my main report and putting a control source as
=IIf(qryRepCurOrgProjsSR.Report.HasData,0,"Nothing")
Then in my Report Open Event i put the code below. But it fails me still.
If trim(Me.MyText) = "Nothing" Then
MsgBox "The Report Is Cancelling....."
Cancel = True
Exit Sub
End If
View 3 Replies
View Related
Feb 20, 2008
As example, I have a table with an Item number, introduction year and a number of historical and future Sales periods set per year, these sales columns are listed Y1990, Y1991, Y1992....... Y2015.
Based on each items introduction year, I want to list the first 5 years of sales.
I wanted to create a dimensional fieldname eg: FirstYear: "Y"&[introduction year] to get the value of that respective year. (I currently just get a text saying "Y1995", and not the content )
Any help is appreciated!:)
(Note: I can't transpose the data in the tables for other reason)
View 3 Replies
View Related
Nov 30, 2004
Hi,
Self learning trying to modify a query fieldname and criteria thru code.
Have a small form with a button making a copy of a query/s (eventually making about 50 copies).
Once these have been made, would like to open the query up, which I can do, then modify both
the fieldname and the field criteria to suit my needs from parameters set in the form.
How do I do this if it can be done ?
Thanks in advance
Ian T
View 3 Replies
View Related
Jul 6, 2005
Below is the working version of the code works for single report filtering. say a report called "rptduedate_census2" and i can filter out using form instead of hard coding query of that report (say lastname=form!frmsample!txtlastname). I dont want to hard code query and there are reasons for that.
I am using a Main report called "rptDueDates_Dept' and there are about 10 different subreports (see print screen). The main report is not bound to any query. It has many subereport. Each subreport is bound to some query and i need to be able to filter them before data appear on the main report. Am i making any sense, LOL.
How can I implement my working code below to do this. PLEASE PLEASE PLEASE HELP. I AM NEW TO ALL THIS. I have attached a print screen of the main report, just to show how i put subreports in their.
===== MY WORKING CODE ======
Private Sub cmdPrv_Click()
Dim strFilter As String
strFilter = "[Mail_Census_Date] BETWEEN #" & txtStartDate & " # AND # " & txtEndDate & " # "
' Apply the filter and switch it on
If SysCmd(acSysCmdGetObjectState, acReport, "Report") <> acObjStateOpen Then
DoCmd.OpenReport "rptduedate_census2", acViewPreview
With Reports![rptduedate_census2]
.Filter = strFilter
.FilterOn = True
End With
DoCmd.Restore
Exit Sub
End If
End Sub
View 1 Replies
View Related
Jan 12, 2015
I have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
View 2 Replies
View Related
Jun 25, 2014
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
View 1 Replies
View Related
Dec 13, 2013
Access 2007
Windows 7
Trying to get a subreport total to show on my main report
getting #error no matter how I code
Running a subreport containing a total in report footer (only field that
name of subrpt total fld subrpt
[SubRptExp].[Report]![gramtrcvd]
View 9 Replies
View Related
Jul 30, 2015
I am trying to get my totals from my subreports, and dividing the number by 2 or 4, and put the new number on the main report.
for Operator/Trainer Productivity, I used:
=([rptEmployEvaluationOperator subreport].[Report]![OPTotal]+[rptEmployEvaluationOperatorTrainer subreport].[Report]![OPTotal])/2
for Auditor/Trainer Productivity, I used:
=([rptEmployEvaluationAuditor1 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor2 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor3 subreport].[Report]![OPTotal]+[EmployEvaluationAuditorTrainer subreport].[Report]![OPTotal])/4
These both work if there are values in all totals subreports. When one of them might not have a total, I get an error message.
I tried to use :
=IIf([Orders].[Report].[HasData], [Orders].[Report].[txtOrderValue], 0)
=IIf([Orders].[Report].[HasData], Nz([Orders].[Report].[txtOrderValue], 0), 0)
=iif([rptEmployEvaluationOperator subreport].[Report].[HasData],([rptEmployEvaluationOperator subreport].[Report].[OPTotal]+=iif([rptEmployEvaluationOperatorTrainer subreport].[Report].[HasData],[rptEmployEvaluationOperatorTrainer subreport].[Report].[OPTotal])/2
and the same idea for the second one. I tried both methods and did not work. I am not sure what I am missing.
View 10 Replies
View Related
May 2, 2013
I have a subreport with bitmap files attached, the sub works great until I link it to the main report then the sub shows nothing.
View 2 Replies
View Related
Aug 26, 2012
I have a report with a subreport on it and I find that the subreport has alot of space between each of the rows of data that are shown.
How can I change the space between rows so it is not so great?
I tried "Padding" but this seems to change the distance between fields on each row, but not the distance between the rows.
View 2 Replies
View Related
Nov 9, 2011
I have a report that is fixed at one page for one record. However, there is a subreport with many transactions ("CanGrow"=No). If this goes to a new page I have to close the report and start a new one. This all works fine, except for the last transaction - if the second-to-last transaction record is at the bottom of a page then the last one does not print.
Access seems to format the data, then it realizes that it won't fit on the page so doesn't print it. I am using record id number to know which transaction record to start the next report on, so when it gets to the end my logic thinks it has reached the end as the id number is the last one in the set.
How can I know if the last record has printed or not?
View 2 Replies
View Related
Nov 30, 2006
Im running a query and normally there is only a field-name in heading. I have
multiple tables with equal field names. Now I want to get table names in
heading too (Tablename.Fieldname) so I can make difference between fields on each tables when previewing query. Is this possible in access? I don't want to change all field-names manually, I know it's possible and done easily, but there are almost hundred fieldnames...
Im finding a solution. Help me please. Thanks :eek:
- Roger
--
Have a nice day.
View 1 Replies
View Related
Mar 1, 2013
I have a subreport that works fine on its own. But, when I link to the main report I have an error, which I am attaching here.
View 1 Replies
View Related
Jun 10, 2013
I have a main form (ZooMobile Booking Form-New Client) with a subform (ZooMobile Event Booking-New Client) within it. In the main form I have a button to open up a report displaying the main form's current record.
The report that is opened has a subreport that needs to display the current record from the subform.
So far I've managed to get the report to open to the main form's record using the following On_click command:
DoCmd.OpenReport "ZooMobile Billing Invoice", acViewPreview, , "[Client_ID]=Forms![ZooMobile Booking Form-New Client].CustIDTxt"
I can't manage to get the subreport to open to the current record in the subform, however. I've tried to integrate it into the above event and to use On_load events in the report and subreport but everything either comes up as a bug or has no effect on the subreport's record.
View 4 Replies
View Related
Jun 14, 2014
I have a report, with a sub report. The sub report has a determined height, and can't grow or shrink.
It has enough height for 25 rows, which will never be filled for this purpose.
I need a totals box to appear after the 25th row, but it will only show at the bottom of the list, regardless of the number of rows.
I have a =sum([Price]) control box in the report footer, is there a way to make the report footer go to the bottom of the pre-defined height?
My other option was to place the =Sum([price]) on the parent form, but that got messy with Reports![rptSheet].[rptSheetSub]!Report.[Price]
It didn't like it, nor did the sum function.
View 1 Replies
View Related
Nov 21, 2013
I want to refer field "plyty_sa" which is in "RaportZleceniaRobocze" Report, in "RaportRobocze_Offset" SubReport. The problem is that, SubReport is in Report Footer. I tried many possibilities but I can't find solution.
View 1 Replies
View Related
Apr 14, 2015
I am trying to open a report (rptGMX-IRG) that includes a sub-report (srptRG) based on criteria that is set with two unbound fields on a form (frmGMXbook). This form has two dropdown boxes (cboGMX_No & cboMachSize) and a command button. The first dropdown box includes data located in the main form and the second dropdown includes data that is part of the sub-report.
I can get the report to open properly when I enter data into both fields on frmGMXbook.
However, the problem I am having is the inability to have one or both fields be "Like '*'" and show all associated records.
Here is the code I have on the command button.
Private Sub GMX_Preview_Click()
Dim strCriteria As String
If IsNull(Me.cboGMX_No) Then
strCriteria = "[cboGMX_No] Like '*'"
Else
strCriteria = "[GMX_No] ='" & Me.cboGMX_No.Value & "'"
[Code] ....
View 1 Replies
View Related
Feb 4, 2014
I have a report that has two sub reports one to report deposits and the other to report payments.
The report prints fine if there are records in both sub reports, however when the payments sub report is blank then the report hangs and won't print to pdf at all.
View 8 Replies
View Related
Apr 6, 2013
I am trying to join a number of reports into one report. I have a generic report which displays a different dataset given the user's choice on a form. I created a collection where I can store multiple instances of this report (called mcolReportInstances) - this works just fine.
I was looking to combine all the reports in the collection into one report. To that end, I have created a report with a number of subreport controls but with no sourceobject. In the On_Open event of this blank report, I am trying to set the source object of the subreport to one of reports in my collection:
Me.Controls("Child" & i).SourceObject = mcolReportInstances.Item(strKey)
However, it keeps giving me the error 'Type mismatch'.
View 10 Replies
View Related
Oct 25, 2013
How to display only the first few records in a subreport but keep the grand total of the report itself. When I limit results in query; it gives me the records but only totals for that set. I thought about putting code in the on format in detail section like:
Code:
If me.control.value >10 then
me.control.visible =false
but doesn't work.
View 4 Replies
View Related
Jul 20, 2005
I am new to this and i may be going about this the wrong way but what i am doing seems to do the job until now.
I am making a form that has a combo box, a few text boxes and a subform subreport on it.
The idea is that the first thing a user does is to select a name form the combo box. this name is then stored as a sring and used to set the forms record source and then the subform's (called window) source object. the string is slightly modified during the process to do this. That part works fine.
The problem arose when i included text boxes to show infomation from the selected Query thatisant show in the window (subform).
After the user selects a name and the name is used to set up the record source and the source object for the text boxes.it then displays in the text boxes the records extra data. however it only displays the first row extra data.And when other rows in the query table are selected the data in the text box stays set as the first row.
I know that this is because i haven't programed in an event that makes the text box data update when the user selects a new row.
i also realise that i would need to have some way of know what row of the quiery table the user is looking at to be able to update the text boxes.
my questions are
Is there a way to tell what row of a query table in the subform is selected ?
Is there an event similar to on selection of row or something like that that i could use to reload the text boxes?
and finaly
am i going about this the right way?
Any input on this would be greatly appreciated :)
View 5 Replies
View Related
Mar 1, 2007
I ahve in error typed the above - however it compiles and compacts and repairs without throwing an error. Should this be spotted before I actually run the line of code??
Ta
View 10 Replies
View Related
Dec 13, 2007
I am trying to create a query that can be customised by a combobox.
I have a combobox that lists the fieldnames from table (rather than records)
I want to be able to run a query that updates the field selected from combobox with the vaule from another txtBox
What I want to be able to write in SQL is;
UPDATE Products
SET [Forms]![Master_Form]![Combobox] = [Forms]![Master_Form]![Qty]
WHERE (((Products.ProductName)=[Forms]![Master_Form]![ProductName]));
But of course this does not work.
Any help would be appreciated in SQL or VBA?
View 4 Replies
View Related
