Reports :: Access 2013 - How To Get Charts To Display Correctly
Mar 3, 2013
I've developed and used over the past 20 years to handle my home finances. It includes several charts that were probably created back in Access 2003, which I used up until a couple of weeks ago when I subscribed to Office 365 Home and set up Office 2013, including Access.Most things worked without a hitch. In fact, all my old VBA code seems to run just fine.
However, the charts don't work. The right side of chart gets cut off way short of the margin both in print preview and report view. Everything else looks fine and the data is correct.
I've fiddled and fussed and fangled with zoom, clip and stretch. I've tried to resize the chart area - it just snaps back. I've tried everything I can think of based on 20 years of fussing with Access charts - which has always been a major pain - without success.
View Replies
ADVERTISEMENT
Nov 6, 2013
My forms work well, but in form view are widely separated from the user tool bar. That is, the form is in the upper top left corner of the screen and the tool bar for choosing records is in the left hand corner at the bottom of the screen. I cannot get the tool bar in a position near the bottom of the form where it would be easier to work with.
View 9 Replies
View Related
Apr 5, 2014
I have a program.mdb with a customized menu bar from Database Creations.When I open program.mdb in 2007 & 2010 the ribbon is disabled and the custom bar is displayed as it should be and all is OK.When I open the same program.mdb in 2013 the ribbon is displayed and the custom bar is missing
I have a clean compile and get no error messages.How do I disable the ribbon and get the custom EZ Menu Bar to display in 2013?.Following are the Options, Current Database, Ribbon and Tool Bar Option settings that is used in all Access 2007, 2010 & 2013 versions
Ribbon Name:
Menu Bar:EZ Menu Bar
Shortcut Menu Bar:(default)
CheckedAllow Full Menus
CheckedAllow Default Shortcut Menus
UncheckedAllow Built-in Toolbars
View 1 Replies
View Related
Nov 8, 2013
I'm using a web control to display a page. I want to have a code that can copy to a field in that same form, the html source of that page that is displayed in the web control. How I can do that?
View 13 Replies
View Related
Feb 7, 2014
I have an table with attachment field in which PDF files are attached.I need Access 2013 form to display PDF file content instead of PDF icon .While record changed should display PDF content for each record navigated
View 7 Replies
View Related
Dec 16, 2014
I am regularly getting the error "There is not enough free memory to update your display, close unneeded programs and try again"
Access 2013 on a windows 7 machine with 4 processors and 24GB total RAM.
Today I have 14 GB free memory (unbelievable! my first laptop had 136 MB total memory!) when I got this error (Access using 38MB) which makes me believe its not a system memory issue but to do with how much (or quickly) memory is allocated to Access.
View 5 Replies
View Related
Sep 8, 2014
In the Access Table, how does one Find and Replace part of the hyperlink if the Text to display is different?
Example of Hyperlink Editor:
Example of Find and Replace
In other words, I'd like to find FAKESERVER and replace it with C:Users in all 1000 records. Is there any possible way to do this if there is Text to display?
View 4 Replies
View Related
Mar 11, 2014
we are moving from Access 2003 to 2013 using Windows 8.1 64bits. We used Leban's code and library to create and merge pdfs. C
Creating pdfs can be done with built-in functionality in Access 2013. But I can't find a way of merging pdfs. I've tried Leban's Dlls files but I am getting run-time error: "File not found:StrStorage.dll" do I need to do something extra to make Leban's code work on Windows 8 64bits ?
View 8 Replies
View Related
Apr 29, 2015
Having trouble using .JPG images in Access 2013 reports? I inserted some images (of arrows) onto a label report. Since then, I've had problems with my DB becoming corrupted or "unstable". I can give more detail if wanted, but my main question is do y'all recommend using images in reports and forms. If so, what format?
View 2 Replies
View Related
Dec 9, 2013
We have run into a problem with Access 2013 when trying to print reports. The program always crashes. Have updated printer driver for the HP LaserJet P2035.
View 1 Replies
View Related
Sep 26, 2014
I have access 2013 windows 7, I'm trying to expand the record keeping on a database someone else designed. I've added the fields i need to the Recordsource(s) (the table, query, and working on the form as well) I can't make the report any larger it seems (its currently at 22") and i need to add another "page" worth of fields horizontally; is there a way to do that? and also to replicate the header and other key fields so they're on that 3rd page.
View 3 Replies
View Related
Apr 1, 2015
I have date picker which works correctly in form. When I put that form as subform to reports header calendar shows up but after selecting date on calendar textbox stays blank. Format of textbox is Short Date, Show date picker property is For dates.
View 1 Replies
View Related
Jun 25, 2014
What I want is for the "Time In" column in the listbox to show the time as hh:mm, just like the other two. The listbox is pointing to the table correctly, as evidenced by all the data showing up, but what floors me is despite the "sign_in" table showing time in all three columns in the desired format of hh:mm, the listbox seems to have its own thoughts about how to display the called data.
View 7 Replies
View Related
Sep 2, 2013
I have been tasked with creating a database to log employee suggestions and then automatically present reports around the site. I have developed the database and it works OK and can output *.PDF reports, but I'm having problems with how to display these reports. My idea was to output the reports automatically as *.TIFF or *.JPG files and have them stored in a folder that the My Pictures screensaver uses. The reports (in fact, any site report stored in this folder) can then be shown on any screen dotted around the site when it goes into screensaver mode. However I can't find any way to output/convert to a picture file.
The other option is to create a webpage that rotates through the saved PDFs, but this isn't ideal as the PC users will have to load the webpage to display the reports.
View 4 Replies
View Related
Sep 17, 2013
I have a table that gets updated by a query(For Invoices).When I query that Invoice table for the last record, I do not get the last one written. It stops at number 12. I am using the Totals option with Invoice number field and setting to "Last".is there another way I can get the last record to query correctly. I am trying to populate an invoice report.
View 6 Replies
View Related
Jul 21, 2015
Working on a report that displays multiple pie charts. Each chart is based on a different query. I cannot pull a single query for all charts due to the criteria for each conflicting with each other. Each query is filtered by Fiscal Year based on what I input into my Fiscal Year Filter form. The command button on the FY Filter Form opens the report, set TempVar to the FY field (the criteria for each query), and closed the FY Filter Form. This works as I want it to.
The problem: I have additional fields I want to show up on the form such as number of completed students (WINGED). This number is based on yet another query where all completed students are counted [WingedCount]. I have tried to write an expression to an unbound field that points at this [WingedCount] field but it does not work. Then, I changed the report's source as the query with the [WingedCount] field. This does work, however this is where I run into an issue
I open my FY Filter Form and type in my criteria and select the open command button. However, now I am asked for the criteria again for each chart on the report.
I need a way to input the criteria only once and have all charts populate as well as my count field.
I have attached a jpeg of my current report and will upload jpegs of the needed output following this post.
View 6 Replies
View Related
Sep 25, 2013
This is re-statement for clarity of earlier thread deleted.
In Access 2010 I have a Report with a Detail Section that shows a record and a Sub-report that shows the many records of a one-to-many relationship.
The Report Detail Section Property Sheet specifies a Back Color and a different Alternate Back Color.
Report View alternates the Detail Section background colors correctly.
Print View and Printing DO NOT correctly alternate the background colors. Back color and Alternate Back Color appear in irregular sequences.
how to fix it?
View 2 Replies
View Related
Mar 13, 2013
My report generates base on 2 date inputs(from textboxes) namely, ProcStartDate & ProcEndDate & a combobox(cmbRptSupplier) to select the supplier:
Code:
Private Sub btnReport_Click()
Dim strDocName, strWHERECondition As String
strWHERECondition = ""
If Me.cmbRptSupplier = "" Or IsNull(Me.cmbRptSupplier) = True Then
[Code].....
When I leave my cmbRptSupplier blank (so that I can leave supplier out of my criteria), & fill in 1/2/2013 for ProcStartDate, 14/3/2013 for ProcEndDate, I get ALL the invoices displayed in return for my report. Even with those before 1/2/2013.
View 10 Replies
View Related
Sep 14, 2014
I have been trying to figure out why my subreport is only showing sales price for only one of the records on my subform. Everything else works as it should, but it only displays the sales price for the record which is active on the subform.Attached is the database with the subreport called rptProposalItems with the field 'Sales Price' which is experiencing the issue.
View 7 Replies
View Related
Jul 17, 2013
I have a report, and the "reason" field is one that can grow as needed. The following string is in the field: "MISSING IMPLEMENTATION PLAN, MISSING SERVICE LOGS FOR DATE OF SERVICE". I bolded MISSING, where the space hits the border. My standard setting for the border style is Transparent, and the space is causing the growing to not work properly. TransparentBorder.pdf shows the incorrect growing. When I change the border style to Solid, the growing works correctly, as shown in the SolidBorder.pdf file.why the growing is not working properly with the Transparent border, but does work correctly with the Solid border?
View 3 Replies
View Related
Jul 6, 2006
I'm trying to set up a database to track a huge group of corporations. There is the parent company, then a bunch of subsidiaries below it. Some subsidiaries have another layer of multiple subsidiaries below it, some have none. Any thoughts as to how to do it???
View 1 Replies
View Related
Nov 24, 2004
a co-worker set up several pivot charts in queries, that we now need to get into a distributable format. I had envisioned having these in a report, but access doesn't agree. Is there any way of getting the chart out of access, intact, to place in a word or power point file, or into a report? My attempts to get the chart into a report have all ended with the table-like grid coming up. Surely there's a way...
thanks!
View 3 Replies
View Related
May 4, 2005
I have a couple charts that I would like to show on my switchboard. Right now I only have one that is up everytime I open my database. Is there anyway to have it do a random Sub form show up everytime you open the database up? Thank you for your help. Without this forum I would have shot myself a long time ago!
View 1 Replies
View Related
Apr 1, 2004
I have created a pivot chart using the Autoform and now i want to export this charts to powerpoint, i cannot copy that chart which i have created in in autoform, i can export the pivot table to excel sheet and draw again the chats but i cant copy or export the pivot charts directly, Is there any option for that. can anybody help me in this case?
View 2 Replies
View Related
Apr 6, 2008
Hi, okay completely new to access. I'm trying to create a chart based on a query with 1 record 8 fields. I can not figure out a way to rearrange the data into two fields 8 records.
The background is I have a hundred units, each with 8 wheels. I have a table with the following fields.
-Unit part number
-Diameter of wheel 1
-Diameter of wheel 2
-Diameter of wheel 3
-Diameter of wheel 4
-Diameter of wheel 5
-Diameter of wheel 6
-Diameter of wheel 7
-Diameter of wheel 8
So, the query tells me how many wheel diameters between a certain range, with the following fields:
- Diameter >530
- 530> Diameter >540
- 540> Diameter >550
- 550> Diameter >560
- 560> Diameter >570
- 570> Diameter >580
- 580> Diameter >590
- 590> Diameter >600
Now I want to plot the range on the x axis and # wheels in that range on the y axis of a bar chart.
Any suggestions on how I can achieve this? How do I create the diameter range as a record rather than a field?
Many thanks!!!
View 4 Replies
View Related
Mar 17, 2014
I have an application in Access 2003. It uses VBA to open an Excel file. The file has one tab for charts and one for data. The program counts how many charts needs to be created, one per project. It then will place 4 charts per tab, creating as many chart tabs as necessary, keep one data tab. The program then writes the data and links the data to the corresponding chart. It will also write legends, and scale the charts. This all works fine under Access 2003/Excel 2003.The error I get is "Application-defined error or object defined error".The line that gives me the error is: Set chCopy = xlsheet.ChartObjects(idx).I am using the Multi-Chart option frmChartType = 1
Now I'm moving to the Office 2010 world. It is not working. Below is the code I run to do the magic. I guess something is happening in Excel 2010 that is different from 2003.I found when I comment out the error line, and other lines dependent on chCopy it creates the charts, but all the charts are pictures and not charts!!
Code:
Public Sub GenerateChart()
' Generate an Excel chart
Dim db As Database
Dim rst As DAO.Recordset
Dim xlapp As Object
[code]...
View 2 Replies
View Related
