Reports :: Add DLookup To Subreport - Member Not Found
Jul 3, 2014
I need to add a DLookup to my Subreport.
For my text box, Text255, on the Subreport I have tried:
Code:
Private Sub Report_Load()
Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
Code:
Me.Text255.QC_Along_Line_Processing_Subreport!Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
View Replies
ADVERTISEMENT
Nov 27, 2005
Hi,
Trying to run a template on a new computer.. it works on other computers, but in this case it gives me this compile error.. kind of strange.
It comes up here-
End With
Selection.PasteAndFormat (wdPasteDefault)
Selection.MoveUp Unit:=wdParagraph, Count:=1, Extend:=wdExtend
(.PasteAndFormat) gets highlighted... I'm not that computer savvy... please help!!
Thanks heaps
Ross
View 7 Replies
View Related
Jan 19, 2015
i have the following code in a function but when i want to compile it i have the following code will be blue i have error in this line:
.NamedParameters = True
the error message is this :
method or data member not found
my code is as following:
Function Get_Bearbeiter_Detail(ByVal vBearbeiter_Code As String, Optional ByRef vBearbeiter_Name As String, Optional ByRef vReadOnly_Flag As Boolean, Optional ByRef vAnalyser_Flag As Boolean, Optional ByRef vAdmin_Flag As Boolean) As Boolean
On Error GoTo Err
DoCmd.Hourglass True
Dim rst As ADODB.Recordset
[code].....
View 1 Replies
View Related
Jun 11, 2013
I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.
'Open form to new record
gstrCallingForm = Me.Name
strDocName = "frmNewApplicant"
[Code].....
View 14 Replies
View Related
Sep 27, 2013
I'm a newbie trying to upgrade a 2003 database to 2010. When I compile this database an error pops up saying "Method or data member not found". This is the code below:
Private Sub CBPrintReq_Click()
On Error GoTo SendPrintError
Dim NewID As String, Notice As String, Temp
Dim CRLF As String * 3
CRLF = Chr$(10) + Chr$(13)
Notice = ""
[Code] ....
View 1 Replies
View Related
May 18, 2006
Hi all, I’m trying to filter the records a subform shows based on the employee number (in a combo box) that the user selects in the main form. At the moment im getting the following message when I select an employee number in the combo box: “Compile error, method or data member not found”:confused:
Ive searched the forums on here and tried to make use of the information other people have posted but im still having trouble getting this to work
Below is the code I have on the combo box of the main form:
Private Sub Cbo_Emp_Filter_AfterUpdate()
Dim strSQl As String
strSQl = " Select * from DATA-EMPLOYEE_MASTER where DATA-EMPLOYEE_MASTER.EMPLOYEE_NUMBER=" & Form![SCREEN-ABSENCE_TRACKING_MAIN]![EMPLOYEE_NUMBER]
Me.SUBFORM_ABSENCE_TRACKING.RecordSource = strSQl
Me.SUBFORM_ABSENCE_TRACKING.Requery
End Sub
Ive also posted the database if any one is willing to have a look for me (ive removed irrelevant tables/forms/reports). Im using access 97
Thanks
Jim
View 3 Replies
View Related
Jun 8, 2012
Error: Compile error: Method or data member not found when create Update button
View 7 Replies
View Related
Mar 12, 2014
Compile error: Method or data member not found
Code:
Option Compare Database
Option Explicit
Dim intItems As Integer
Dim strName() As String, datBirthDate() As Date, intAge() As Integer
Private Sub Form_Load()
intItems = Val(InputBox("How many names do you have?", "Name List"))
[Code] .....
View 8 Replies
View Related
Sep 19, 2014
I have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.
It is a data entry form. I.e. Dataentry is set to yes.
The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.
The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.
I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:
Rate.Requery
Application.Requery
But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.
I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.
However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.
The Application combo box SQL is:
SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName
FROM Applications
WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName]))
ORDER BY Applications.ApplicationDate, Applications.ApplicationName;
This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.
I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.
I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.
Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.
I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.
View 2 Replies
View Related
May 13, 2013
I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.
MsgBox "First Value, " & Me.txt_FSNo
CurrentDb.Execute "INSERT INTO BackchargeLog (BC_FSNo, BC_FContract, BC_FPurchaseOrder, BC_FProjectArea, " & _
" BC_FTitle, BC_FDetailDescription, BC_FSupplierToBeCharged, BC_FSupToBeChargedNumber, BC_FSTBCContactName, BC_FSTBCContactNumber, " & _
" BC_FSTBCContactEmail, BC_FIncidentReportedDate, BC_FInitiatedDate, BC_FEstimateAvailable,
[Code] .....
View 7 Replies
View Related
Aug 11, 2006
I have two similar forms with similar controls. I copy 20 pieces of controls to another forms certain tab.
When I run code to update database table using the control box value, access can’t find the control box. I got this errors message.
Do you guys know why I got this error?
Thanks
View 1 Replies
View Related
Jun 20, 2014
So I am adding a chart (on a subreport) to a report that has multiple subreports already. I have gotten the chart to show up correctly on the report, but now 2 of my other subreports are not working. I am being prompted to input parameters for these subreports that used to pull their parameters (between dates) from the main report.
I read somewhere that charts master/child linking doesn't work but I'm not sure if that applies to subreports with charts on them, or just charts in general. I've tried changing the query on the chart subreport a little without luck. Is this likely some glitch thing? Should I keep trying to alter the query or maybe there is some other work around option?
View 7 Replies
View Related
May 8, 2013
I have a main report with 3 sub reports.The Sub reports have onload events that fill up the text boxes with VBA code. When I open the sub report alone everything works fine. But when I open the main report, the on load of the subreport wont work.
View 1 Replies
View Related
Feb 12, 2014
I have a report with several subreports. I need to total the subreports onto the main report. How do I refer to the control on the subreport?I know that with a form / subform I would use: Me!Subform1.Form!Controlname.But simply replacing 'Form' with 'Report' doesn't seem to work.
View 1 Replies
View Related
Jun 16, 2014
I have a main report with several subreports. Some subreports have other nested subreports. all of the reports and subreports are based on queries. when a query returns no values, i would still like for the reports and subreports to display in print preview. (currently, they display in report view but not in print preview.)
I tried a few things:
1) I set all report section can shrink options to "No" - (this did not work)
2) I set the can shrink options for all textbox controls, within each report section , to "No" - (this did not work)
3) I moved all controls from the details section of the subreport to the report header section - (when I did this, I got the subreport to show in print preview when the query for a single subreport returns no values but when i have a subreport with nested subreports that have no value, none of them show up in print preview)
I've searched...moving the controls from the details to the report header was the best thing i could find, but again, this only works with a single subreport and not with multiple nested subreports.
View 8 Replies
View Related
Oct 21, 2013
I would like to create a report based on a query. The first part is simple enough. However within this query I have a 'Count field' (a total of the number of duplicated this record has appeared in the table). And would like to create a subreport (if possible) based on that value for example. if count > 1 then show subreport.
My question therefore; is the above possible? How would I go about linking this logic with the subreport
View 1 Replies
View Related
May 1, 2013
In Access 2010 I am previewing a customer report. I also try to give users the choice of seeing history sub records for any given customer. I have a selection dropdown box where they can chose ALL, 5, 10 or 15 in a report. To this end I set the record source in the "Open" event for the subreport. if I want all records it works fine, but as soon as I put in "SELECT TOP 5" the subreport goes invisible. I have tested the query directly and it works fine. I'm sure this worked in Access 2007
View 3 Replies
View Related
Apr 19, 2013
I have a report with 2 subreports on it. One of the subreports does not show on the report preview unless I set a breakpoint in the report's code. Set a breakpoint in the code (for no other reason), hit the breakpoint, continue, and the report works fine from then on, until you close the database and open it again, even if you remove the breakpoint. The other subreport, which is similar, always shows fine.
I can't find out what's wrong by setting a breakpoint.
View 1 Replies
View Related
Jul 25, 2015
I have a report that calls a subreport. In most instances, the subreport will have no data and I won't want to show the subreport. I've tried various ways to deal with this:
1) Make the subreport property on the main report the minimum height and set CanGrow = Yes
2) Use the Report_NoData event on the subreport and add the code 'Cancel = 1'
3) Make all the fields on the subreport the minimum height and set CanGrow = Yes
None of these seem to work. I don't have any headings on the subreport, so the only price I'm paying is adding a gap onto the main report the size of one detail line of the subreport. Still, it leaves the report lacking professional quality.
View 4 Replies
View Related
Jan 12, 2015
I have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
View 2 Replies
View Related
Jun 4, 2014
I have a report with four subreports. If the subreports have no data I have a formula to put the word 'none' in the first field as follows:
=IIf(IsNull([Question]),"None",[Question])
I do a print preview and the word 'None' shows up and subreport looks good when I view just the subreport as well as when I view the full report.
When I print the subreport the text '#Error' prints. When I print the full report I just get a blank space.
I need the subreport to print with the word 'None' if there is not data. How do I accomplish? I tried the above formula both in the query and in the control source of the report. It just comes up blank when I put it in the query.
View 3 Replies
View Related
Jun 25, 2014
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
View 1 Replies
View Related
Dec 13, 2013
Access 2007
Windows 7
Trying to get a subreport total to show on my main report
getting #error no matter how I code
Running a subreport containing a total in report footer (only field that
name of subrpt total fld subrpt
[SubRptExp].[Report]![gramtrcvd]
View 9 Replies
View Related
Aug 20, 2013
I have some fields in form that most of the time have data in them. Now comes that when there is no data, there should be one different field filled in with "None."
The client could have 3 types of products, but when he does have none, the "None." should appear. Another catch is that I have the titles for the products on a textbox above the products. Is it possible to have them not appear in the report if the client has no products?
I guess that it could work like in excel with an IF statment. If no values found, then keep those text boxes from appearing on the report and put a text with "None."
View 2 Replies
View Related
Aug 22, 2013
I am using Access 2003. Is there any way to put grid lines among fieldnames and contents just like in Excel in the output of subreport?
View 1 Replies
View Related
Jul 30, 2015
I am trying to get my totals from my subreports, and dividing the number by 2 or 4, and put the new number on the main report.
for Operator/Trainer Productivity, I used:
=([rptEmployEvaluationOperator subreport].[Report]![OPTotal]+[rptEmployEvaluationOperatorTrainer subreport].[Report]![OPTotal])/2
for Auditor/Trainer Productivity, I used:
=([rptEmployEvaluationAuditor1 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor2 subreport].[Report]![OPTotal]+[EmployEvaluationAuditor3 subreport].[Report]![OPTotal]+[EmployEvaluationAuditorTrainer subreport].[Report]![OPTotal])/4
These both work if there are values in all totals subreports. When one of them might not have a total, I get an error message.
I tried to use :
=IIf([Orders].[Report].[HasData], [Orders].[Report].[txtOrderValue], 0)
=IIf([Orders].[Report].[HasData], Nz([Orders].[Report].[txtOrderValue], 0), 0)
=iif([rptEmployEvaluationOperator subreport].[Report].[HasData],([rptEmployEvaluationOperator subreport].[Report].[OPTotal]+=iif([rptEmployEvaluationOperatorTrainer subreport].[Report].[HasData],[rptEmployEvaluationOperatorTrainer subreport].[Report].[OPTotal])/2
and the same idea for the second one. I tried both methods and did not work. I am not sure what I am missing.
View 10 Replies
View Related
