Reports :: Adding A Chart That Represents Information On Report
Apr 2, 2013
I have a popup form that prompts for a value and has a button defined with an OnClick,OpenReport with a WHERE clause. The value the user enters is placed in the WHERE clause.
The report is generated using a Query and the WHERE clause.
I was very surprised -- it works!
Now I'd like to add a chart to the report that represents the information on the report. How can I do this without calling the query again? Can I somehow reference the information that's in the report?
I have a query written that has two numbers. One is the trucking fleet size (63) and the other is the average number of trucks used over a time period (in this example, its 52.2)..I just want to create a pie chart that has 52.2/63. so the pie would be roughly 90% filled.
I am working on a project that is requiring me to hide a subreport that happens to be chart graph, when the chart has no data and my problem is that I cannot seem to get the report to properly hide and show the label behind it when the data is not there. I am in need of a SQL code that will read my blank record source as a zero instead of blank. I have tried Nz, IsEmpty, and IsNull and none of them seem to work.Here is the current SQL code:
SELECT DISTINCTROW Sum(Case_review.ID) AS SumOfID FROM Case_review WHERE (((Case_review.[Type of Issue].Value)="Clinical"));
Here is the current VBA code (which is in event on load) for the main report:
If Me.Rpt_Clinical.Report.HasData = -1 Then Me.Label29.Visible = False Me.Rpt_Clinical.Visible = True Else Me.Label29.Visible = True Me.Rpt_Clinical.Visible = False
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
I am having an issue with viewing a report. I have a button set up to show the print preview of the report. There is a chart based on the report's record source, and two sub-reports showing related data. The print preview section however shows the the chart area where it would appear is blank, i.e. there is a white area where the chart should go. There is no error message. The two sub-reports appear correctly. If I go to print the report, however, the chart appears, and it will also appear if I change the view type (e.g. to layout and back again).
I have a bar pivot chart made in a form this load fine, I have the below VBA code in place to control the bar color depending on what the bar show.
Set frms = Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0) Dim i As Long With frms For i = 0 To Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0).SeriesCollection.Count - 1 With .SeriesCollection(i).Name Select Case Forms![OtherCases created by Indv by Month
[code].....
When I then open the Report this is not working at all each bar just get a random color regardless what the bar show.how to convert the above to fit a Pivot chart form a form that is displayed on a report.
I have created a database that tracks production by individuals. I have also created a report which includes a pivot chart to give the user a chart view of production.
In the pivot filter of the chart I have associate names, where the user can click all, or individual associates, to see individual production.
The trouble I am having is when the user goes to print the chart, it will only print the chart with the "All" filter view. Even if the pivot chart is filtered to one associate, it will print like "All" was checked.
Is there a way to allow the report/pivot chart to only print the production for the individual who is checked within the pivot filter?
I've got a report, which on the screen is three chrts and a page break in between. Page is set up to print landscape.
When I print the report or save to pdf it adds a lot of pages in between 2 and 3. It seems to be of chart no.2 getting smaller and smaller. I've attached a copy of the pdf so you can see what I mean.
I have a query that has a field that reads DateReceived By Month: Format$([Workorders].[DateReceived],'mmmm yyyy') The criteria line is Like "*" & [Enter Month & Year (Leave Blank for all)] & "*" And this works when I run the query. If I enter october 2013 it shows only records for this date range like it should.
Then I built a bar chart report that will show the workorders only for the month entered. The problem is, If I leave this field in my query the chart does not update . When I open the chart it will prompt for the month and year but the data in the bar chart doesnt change. If I remove this field the chart updates as expected.
If I go into design view for the report and then right click on the chart and go to properties , then to row source, it reads as this:
TRANSFORM Sum([Workorders Query2].MyTime) AS SumOfMyTime SELECT [Workorders Query2].SerialNumber FROM [Workorders Query2] GROUP BY [Workorders Query2].SerialNumber PIVOT [Workorders Query2].[MXDPrinter];
If I click on the elipstical to go into query tools for this line , and click on run I get the error : The microsoft Access database engine does not recognize '[Enter Month & Year (Leave Blank for All)]' as a valid field name or expression.
So my criteria runs normally in the query and returns the correct records, but I can't get it to work in the chart .
This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.
What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .
I know how to create a chart in an access report, put it in the group header or footer and link it such that the the grouping filters the chart.
My VP wants me to create a chart that compares each invididual providers episiotomy rate (something that is done to pregnant women during delivery) to the overall divisional rate on a monthly basis.
I know how to do this with 2 charts, ie 2 different group levels. One chart goes in the date grouping level (the overall rate) and another goes in the provider grouping level (the individual provide rate).
is there a way to have this in one graph in an access report?
I have a table that shows "DONE" and "REMAIN" for each "AREA" like below:
Code:
AREADONEREMAIN TOTAL AREA1100200300 AREA2200300500 AREA3200700900
Now I like to make a report that shows "DONE" and "REMAIN" in each AREA with pie chart, now I have problem how I have to do this job for the graph, how should be "row source" of chart control. What query needs on this table?
I've got a simple dataset that will ALWAYS have 4 rows, against which I have assigned the colours Green, Amber, Red, Grey. So I made a simple pie-chart to go on the report, but I can't work out how to assign the same colours.
Please see 3 attachments showing the current layout, the preferred layout (which I mocked up in Excel) and the chart settings screen.
The chart is working OK i.e. 4 slices appear and they are the right size, but when I open the chart, I see only East, West, North. So I am unable to manually set the colour for the 4th slice.
Using a Microsoft Chart Object 6.0 in an Access 2010 report. It's easy enough to do the basics and that chart responds to data.In my case, I have 12 lines, or columns, being controlled by data. It responds to the data. just fine. What I want to do is control the line weight and colour of each line through VBA.
You can click on the chart itself on the report form, but formatting the line you actually want is almost impossible. Pretending we can, you get the pop-up configuration windows and the TAB "PATTERNS". Under that, you can select "LINE" and then choose the style, color and weight. This is what I need to do in VBA.
Lines like this do not work:Graph_Data.Columns("A").Line.Weight = 5 or... objDataSheet.Columns("A").Line.Weight = 5I tried a variety of versions of that and am pulling my hair out.
I need to split out information in a report and I'm not sure how to do it.
The report is based on the following query:
Code: SELECT tblHazardClass.HazardClass, Product.ProductName, Product.Package, Product.Size, tblStoreProducts.Cases, Product.Units, Product.ReportUnits, tblStoreInformation.StoreName, (([tblStoreProducts].[MaxUnits]*[Product].[Size])/[Product].[ConversionRate]) AS QOH, tblStoreProducts.StoreKey FROM tblStoreInformation INNER JOIN (tblHazardClass INNER JOIN (Product INNER JOIN tblStoreProducts ON Product.UPC = tblStoreProducts.UPC) ON tblHazardClass.HazardKey = Product.HazardKey) ON tblStoreInformation.StoreKey = tblStoreProducts.StoreKey WHERE (((tblHazardClass.HazardClass)<>"NON-HAZARDOUS")) ORDER BY tblHazardClass.HazardClass;
My issue is that the products can have a PhysicalState of 'L' (liquid), 'S' (solid) or 'G' (gas). As of right now, only one of the HazardClass entries has multiple physical states (L or S).
My report details each product in the hazard class and totals the amount of that hazard class. Obviously, one cannot add gallons to pounds and come up with an answer that has any meaning whatsoever. How to have the report total the S and the L within a hazard class separately.
Do I do this within the query, or within the report itself? I've already considered making 2 separate Hazard Classes for the one in question (Corrosive). However, since these Hazard Classes are official classifications per the International Fire Code, that's not really an option.
I am trying to get some totals on a report, but the totals are from a table that the form is not related to as such.I am trying to get a textbox to show how many records in a query match the given criteria and show me the number of records that match. I was thinking DCount, but not sure if it will work?
I have a query called 'VehiclesAllocatedToday' which is already filtering records to show only those allocated today. On a report that shows Unfit Vehicle (and is related to a different query), I would like a text box that shows me how many records there are where the text "Type One" is in the TypeRequired field.
I have a Table with Emp_ID and Details of my Employees. I have created a query and set parameter [Enter Emp_ID]. When I pull up a report, I get a pop-up and it asks me for the Emp_ID. When I input same, I get the information I need. Everything is good so far...
My Question... I have designed a report when user will need to enter Emp_ID and click on a button and they will get the report "EMPReport" without having the pop-up window asking for EmpID.
I have been using the below code but I get the pop-up again and I need to enter the Emp_ID again to view the report
See below Code:
Code: Private Sub Image11_Click() If IsNull(Me.Emp_ID) Or Me.Emp_ID = "" Then MsgBox "You must enter an Emp ID.", vbOKOnly, "Required Data" Me.Emp_ID.SetFocus Exit Sub End If DoCmd.OpenReport "Rpt_HR1", acViewPreview, , "[Emp_ID]= " & "" & Me!Emp_ID & "" End Sub
I have a question related with a report i`m using to print labels. I am not familiar with Access and this is quite a challenge to do it alone.
In the attached file there is a report called "MICRA", when started it asks that you want to select (default is 1 and special select in this case is 11) and next it asks "SPS", the value entered there is printed in the bottom right corner of the report.
My question is is it possible if in the SPS field is entered a special value (for example "MASS") to print 30 labels of each selected label with text in this fiels = "val.1"; 15 with text in the field = "val.2"; 10 with "val.3" and 10 with "val.4" and after that to print next label with same rules...
And if not entered "MASS" to print just 4 copies of every label.
I have a question about summing information on a report. I am developing a report to see have percentage of time Staff work within a certain area. On the data base the time percentages entered as ranges e.g. 75-100%, or 11-25%. We needed to figure out the total percentage of time so I created a report to add the total time. I used a text box which it titled FTE_Total if embedded iif functions to display the total time. Here is the function I used:
This worked perfectly however I cannot get the FTE_Total fields to sum. I tried the following function in the group footer: =Sum([FTE_Total]) but everytime I try to look at the report in report view I get a message asking for the FTE_Total Parameter.
Im trying to add a barcode to a report which I can scan with a barcode scanner. I have downloaded A code39 TrueType font and created a textbox and have put the following in the Data, Control source
Code: ="*" & [Barcode] & "*"
but when I print out the report its only converting the field barcode to a code 39 barcode and leaving "*" at either side of it. I know its not the font as if I open note pad, select the font and enter *1234* all is converted to a scanable barcode.
When I send a customer a work order, I want the final page to be a list of conditions of the current sale. In Word, it is nearly a full page of 7pt font with bold and italic. What is the best way to add this to the end of my report in Access?
I am trying to add text to a report. I am using Access 2007.My report is tied to a query. The query contains 2 fields-Hostname and MAC Address
I want run a report against the query, but need to add several commas. So the output of the report would look like this: hostname,MAC Address.
I then want to export the report to a plain CSV file.I thought I could just add a textbox with a comma in the report, but that didn't work well. When I added the text box, Access also created a column header that I did not need.I've also noticed that when exporting a report to CSV format, there are several characters (pipes and such), that work with the formatting of the report. Is there any way to remove this formatting?
I have small database in ms access which i am using for invoice creation. When invoice is created i save it as PDF. I would like merge another single Page PDF along with the report as 2nd page so end report is 2 page PDF.
Second how can i get 1 PDF from 2 ms access reports.
I have a report (report1) which is based on a single query (query1).
There is a second query (query2) which returns just a single value (say 100) and I want the result of the query2 to appear at the bottom of the report1. The query2 is not related to the query1 so I cannot join them.
When I insert a text box in the report1 and choose the query2 from the control source Access gives the error, "The Microsoft Access database engine does not recognize '' as a valid field name or expression".