I'm currently creating a student database where the user where be prompted to enter a students name and then a report is generated with the information retrieved. Everything works as it should but i would like to add a message box that comes up if the data entered by the user is not found in the database. Something like 'No student found, please retry'
View RepliesI have got a No record found for some forms as the code below,
Private Sub Form_Load()
If Me.Recordset.RecordCount = 0 Then
DoCmd.Close
MsgBox "* No Registration Found *"
End If
End Sub
When a paramter search is done and no results found it shows up a message saying "No Registration Found" is is possible to bring up the same type of message in a report format?
How to create a message when no records are found from a form to a query in the report.
Example; Donations From Great Britain have no records
Hello all,
I try to delete a record and i get this error message "The search key was not found in any record". The key of the table is an autonumber but for some reason in these two records i want to delete has value = 0 .
Any suggestion how to delete these two records?
Thank you in advance!
Hi,
I get an error message when I add a new record to my database. It occurs when I open my form and use the [arrowright*]-button and when I use the switchboard button to add a new record using a form.
An error message is displayed, but when I dismiss the error (click OK), then everything seems to be normal and the record is added normally with the entered info. It is a bit annoying, though.
Since I have the dutch version, I'll try to translate the message:
"You can not add/append a value to this object
* The object possibly is a control-element in a read-only form
* The object is part of a form that is opened in the design view
* The value is too large for this field"
The error occurs right after I have typed the first character into a field on the form. The form consists of a few subforms. And I don't think any of the by access suggested errors have anything to do with this...
Any help is appreciated,
Thanks in advance,
MuFfiNimal
I have a report with the following equation to give a status message at the end of the report:
=IIf([RedemptionDate] Is Not Null,"THIS PIN HAS BEEN REDEEMED",IIf([DateAbandoned] Is Not Null,"THIS PIN HAS BEEN ABANDONED",IIf([DateSaleInErrors] Is Not Null,"THIS PIN IS A SALE IN ERRORS",IIf([DateAssigned] Is Not Null,"THIS PIN HAS BEEN ASSIGNED",IIf([DateRecordedDeed] Is Not Null,"THIS PIN HAS A RECORDED DEED")))))
It does a fine job but prints the first status that meets the condition. ie if the Date Abonded is not null it prints "THIS PIN HAS BEEN ABANDONED". But one record may meet several of the conditions. Is there a way to print if a record meets two conditions ie Date Abandoned is not null and Date Assigned is not null?
I am using a query to search for records and I'd like there to be a message box that pops up on the search page if there are no records found (so the query is empty).
I'm guessing there is a simple solution since I think I just need an "If" statement checking to see if a field in the query is null or not. However, I'm not familiar with Access code and what I've tried so far does not work. Any help is greatly appreciated!
p.s. I am using Microsoft Access 1997...old school...
I have a macro in the On No Data event of a report that displays a message when the item number a user requests does not exist in the table being queried.
Now I need to get the same functionality in a form. The form is based on a parameter query with only one criteria [Please enter item number]. The form opens in Edit mode when a valid item number is entered.
I see that there is no On No Data event for either forms or queries, so I'm stumped on how to proceed.
Any and all assistance is appreciated.
Dear All:
I am using a combobox to search for students by their STUDENT_ID.
I wish to display a message "STUDENT NOT IN DATABASE" if the ID number is not in the database when it is typed in.
Here is the code I am using:
Private Sub Combo801_AfterUpdate()
' Find the record that matches the control.
Dim rs as object
Set rs = Me.Recordset.Clone
rs.FindFirst "[STUDENT_ID] = & Str(Nz(Me![Combo801], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark
End Sub
Any ideas where to place this message?
Many thanks,
Dion
Im trying to add a barcode to a report which I can scan with a barcode scanner. I have downloaded A code39 TrueType font and created a textbox and have put the following in the Data, Control source
Code:
="*" & [Barcode] & "*"
but when I print out the report its only converting the field barcode to a code 39 barcode and leaving "*" at either side of it. I know its not the font as if I open note pad, select the font and enter *1234* all is converted to a scanable barcode.
When I send a customer a work order, I want the final page to be a list of conditions of the current sale. In Word, it is nearly a full page of 7pt font with bold and italic. What is the best way to add this to the end of my report in Access?
View 14 Replies View RelatedI am trying to add text to a report. I am using Access 2007.My report is tied to a query. The query contains 2 fields-Hostname and MAC Address
I want run a report against the query, but need to add several commas. So the output of the report would look like this: hostname,MAC Address.
I then want to export the report to a plain CSV file.I thought I could just add a textbox with a comma in the report, but that didn't work well. When I added the text box, Access also created a column header that I did not need.I've also noticed that when exporting a report to CSV format, there are several characters (pipes and such), that work with the formatting of the report. Is there any way to remove this formatting?
Is it possible to add a query to an existing report? I use Access, not VBA.
View 1 Replies View RelatedI have small database in ms access which i am using for invoice creation. When invoice is created i save it as PDF. I would like merge another single Page PDF along with the report as 2nd page so end report is 2 page PDF.
Second how can i get 1 PDF from 2 ms access reports.
I have a report (report1) which is based on a single query (query1).
There is a second query (query2) which returns just a single value (say 100) and I want the result of the query2 to appear at the bottom of the report1. The query2 is not related to the query1 so I cannot join them.
When I insert a text box in the report1 and choose the query2 from the control source Access gives the error, "The Microsoft Access database engine does not recognize '' as a valid field name or expression".
Is it possible to add a front page to a report?
View 3 Replies View RelatedI have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.
My question is:
Is it possible to have an error message box appear when i click submit and no data is returned by the search query?
I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"
Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).
I want to present some data in what seems to me like it would be a very natural and normal format, however have so far been unable to figure out how to do it.I record attendance data for a children's after school club in a table as follows (simplified):
AttendanceID - autonumber
AttendeeName - text
AttendanceDate - date
Attended - True / False
The data looks like this in the table. I would like to be able to easily see who attended on which days, so I would like to therefore see the data laid out like this:
The Crosstab query looks almost like it would do what I wanted, however it seems to insist on adding something up, rather than just showing me the value true or false.
I have a popup form that prompts for a value and has a button defined with an OnClick,OpenReport with a WHERE clause. The value the user enters is placed in the WHERE clause.
The report is generated using a Query and the WHERE clause.
I was very surprised -- it works!
Now I'd like to add a chart to the report that represents the information on the report. How can I do this without calling the query again? Can I somehow reference the information that's in the report?
I am relatively new to Access. I am having difficulty summing up totals and bringing them into the main report. To be more specific I have two sup reports called WOExpenseTotalSubreport and WOServiceTotalsubreport. These two subreports are based off of queries that gather the description, price and qty of either services or expenses and then produces a "total" for me on the query.
When I bring these two queries into a report as sub reports I am able to Sum the "total" field in the subreport footer which works fine. What I would like to do is add those two totals together for a grand total on the main report. The two summed fields are called ExpensesSum and ServicesSum. It seems most things I have tried do not produce an expression error but the result is either #error or #name? Here are a few different scenarios I have tried both on the main report details section as well as the footer section.
=[Reports]![qryWOExpenseTotal subreport]![ExpensesSum]+[Reports]![qryWOServiceTotal subreport]![ServicesSum]
=Sum([qryWOExpenseTotal]![Total]) + Sum([qryWOServiceTotal]![Total])
=[qryWOExpenseTotal subreport].[Report].[ExpensesSum] + [ qryWOServiceTotal subreport].[Report].[ServicesSum]
I am wanting to store a bitmap photo in an access table and then want to include it in a report.
View 5 Replies View RelatedI am not sure where to start or go about creating message box that would display "No results found" if my queries return no results. My search of the forums hasn't been fruitful.
I have created one form that has a text box and a button that works as a search function to run through the tables and displays the applicable queries. Currently, if no results are returned nothing happens. Preferably I would like a message box to display stating that there were "No results found". I would assume that the code would be associated with the "Find" button. Here is the VBA code as it stands, again, I haven't even attempted to add code for a message box.
Private Sub Find_Click()
On Error GoTo Find_Click_Err
If DCount("Heading", "Service Desk Manual Query") > 0 Then
DoCmd.OpenQuery "Service Desk Manual Query", acViewNormal, acReadOnly
End If
[Code] .....
Find_Click_Exit:
Exit Sub
Find_Click_Err:
MsgBox Error$
Resume Find_Click_Exit
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I am using Access 2010 (self taught and continuing to learn each time I get asked for a new report). I have created a query based on the data being selected from two combo boxes on a form, ie start date and end date. The report works as it should but I want to be able to automatically use the dates in the report heading. For instance, Summary Report from xxxxx to xxxxx, where xxxxx is the start and end dates that the user entered into the two combo boxes.
The date field on my query reads
Between [forms]![F - CboReportDates]![Start Date] And [forms]![F - CboReportDates]![EndDate]
I'm trying to add the information from a form and subforms to a report. This would be a medication mar sheet and needs to be in the format of the attached word document. I'm happy to do it in a report and change the formatting if that will work better. The personal info needs to go at the top and the medication needs to be listed on each sheet.
The form is called FrmMarSheet. It basically needs the info from that like the "sample mar sheet.doc". I can only get one medication per page to work at the moment.
I added a "print preview" button to a report that does just that, shows the print preview. The issue I'm having is that I can't do anything in Access after I click that button. Everything in Access seems to stop working, I can't click on anything with my mouse. the only thing that does anything is that i can move the report up and down with the up/down/left/right keys. If I click on a different application that isn't Access (i.e. excel, spotify, email, etc.) and then go back to it, everything works fine.
View 4 Replies View Related