Reports :: Appending Text Item To Each Value In Calculated Field Data

Oct 20, 2014

I would like to append a text item to each value in a calculated field. consider the field name is "Division" and I want to append the word "Division" to the values put out by the field "Division"

My attempt was: Division & " " & "Division". This produced an error in the report.

View Replies


ADVERTISEMENT

Reports :: Report Thinks Calculated Field Is Text

Oct 21, 2014

I'm creating a report to check for over- or under-stocked items. The report is working fine, gets all the records etc. except that it thinks that the OnHand field from my inventory query is text or something, at any rate not a number. I have successfully set the format of the field in the query to General Number, but that doesn't seem to have worked. Here's the SQL for the report:

Code:
SELECT DISTINCT Signs.SignCode, Signs.SignDescr, Size2.XYdim, qryOnHand.OnHand, Bins.Rack, Bins.Level, Bins.BinNum
FROM (Size2 INNER JOIN (Signs INNER JOIN (Items INNER JOIN qryOnHand ON Items.[ItemsID] = qryOnHand.[ItemsID]) ON Signs.[SignID] = Items.[SignID]) ON Size2.[SizeID] = Items.[SizeID]) INNER JOIN (Bins INNER JOIN InventoryDetail ON Bins.[BinID] = InventoryDetail.[BinID]) ON Items.[ItemsID] = InventoryDetail.[ItemsID]
WHERE (((qryOnHand.OnHand)<=[Check for signs with fewer than:]));

View 14 Replies View Related

Reports :: Appending To A Control Field

Oct 28, 2014

I selected and dragged a field "Diivision1" to my report then I appended the word "Division". in the view mode nothing appears.Alternative I used the Expression builder and enter the following: =[Division1] & " " & "Division" but nothing appear in the view.

View 7 Replies View Related

Reports :: Calculated Text Box With Values Less Than 600

Feb 10, 2014

I have a textbox in a report that I would like to calculate the sum of values that are less than 600.Then have a second textbox that counts the number of records that have values less than 600..This is based off of a query with calculated fields..I have been working with a formula that looks something like this

=Sum(IIf([BaleETime]="<600",0))

But all I get is a value of 0.BaleETime is the elapsed time between bales.

View 3 Replies View Related

Reports :: Bound Text Field - Displaying Data Horizontally

Jan 22, 2015

I have only one bound text field in my report. By default, it shows the results (150 records ) vertically. I wish to show them horizontally, 5 in a row. How to do this.

View 11 Replies View Related

Reports :: Variable Used In Calculated Text Box Gets Treated As Parameter Query

Apr 8, 2013

(a) The On Open event of my report contains a VBA Sub that assigns a value to a variable named vShow. (Tracking the sub in VBA shows that vShow is correctly being assigned the desired value.)

(b) I then use vShow to try to control a calculation that occurs in one of the text boxes of the detail section in the report

(c) Basically, the control source of the textbox contains (in part) the statement (vShow>[fieldA]), which is embedded in a longer function.

(d) However, when I type this in at Control Source box of the Data tab of the the Property Sheet, Access always substitutes "[vShow]" for "vShow".

(e) So what I get is ([vShow]>[fieldA]), which treats vShow as the parameter of a parameter query.

ANY WAY TO OVERCOME THIS AND HAVE vShow recognized as the variable I defined at On Open? Perhaps there needs to be a variable declaration there, that I don't understand.

The basic form (vShow>[fieldA]) does not seem to be the problem, because I can enter, e.g. (500>[fieldA]) and everything works OK.

View 2 Replies View Related

Reports :: Sort Records By A Calculated Percentage Using Text Box Values

Jan 27, 2015

So I have a report with the following text box controls:

[Surname] & ", " & [Firstname]
=Sum([Quarter1_A]) - Named "Quarter_Total"
=Sum([Quarter1_T]) - Named "Quarter_Target"
=Val([Quarter_Total])/Val([Quarter_Target]) - Named "%Target" (Percent Format)

The report is grouped by the expression '[Surname] & ", " & [Firstname]'.I am trying to sort the records by the %Target text box. I tried entering the expression into the sort function but it still sorts by the grouped expression. I also tried sorting by the name of the text box but got the same results. How can I sort by the desired control?

View 14 Replies View Related

Drag And Drop Listbox Item Into Text Field

Nov 7, 2006

the title explains this..

im not even sure if this is possible.. but if it is it will be just what i need.

basically the job1 form has a search feature added to it..

as users type the passenger name in the form.. a listbox below updates if a match is found..


if you can imagine the situation..

my user will be entering jobs into this form.. they will not know whether or not a passenger has used us before.. the only way they will know is if they see in the listbox the same name.. and pickup/destination/phone no. details as the job they are about to enter


i wondered if it was possible for the user to click on the customer in the listbox.. and drag and drop it into the passenger name textbox..

can this be done.. the attatchment is very simple.. one form.. job1.

if someone can explain to me how to do it.. or perhaps alter the db i have attached i will be most grateful

thanks

View 1 Replies View Related

Queries :: Automated System - Appending New Contacts To Data / Different Field Names

Jan 30, 2015

I'm creating an automated system on access, basically it uploads client's files and analyses their data. The files will always be different, with the amount of fields changing and with different field names each time

One part of it, is appending new contacts to their data. This means records which we can add new contacts to, needs to be duplicated with the new contact placed at the end. So it needs to be like

Company Name New Contact Name
A
B
B Tom
B Harry

Because it's automated with different field names each time, the duplicating part is an issue. I can use the * rule which appends all fields, however this will not work in this case, if we are adding more than 1 new contact, the new contact will be duplicated rather than having 2 new different contacts.

Ideally I want rule saying, append all fields EXCEPT the fields where the new contacts are placed, but I don't think this is possible

I'm using Access 07 for this. Using a mix of VBA and SQL in the modules

View 2 Replies View Related

Reports :: Using Calculated Data In A Report

Mar 19, 2014

My employer is using Windows XP Pro and Office 2003 (a few machines have Office 2010, but not mine). Furthermore, the machines are running the Japanese language OS, which has caused some comparability issues with my English XP/Office 2003 at home.

I have a form containing an unbound textbox, with the name MIS. The form's Current event has the following code:

If IsNull([[ResignationDate]) Then
MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))
ElseIf [ResignationDate] > Date Then
MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))

[Code] .....

The calculates (correctly) the Months in Service of the employee who's information is being viewed.

Now, I am trying to create a report which lists the employees by work locations. The above , and other calculated information, is to be displayed in the report.

I used the wizard to create the report, using data from two different tables (employee & location).

I need to display the calculated information above for every employee at every location.

Example:
"Work Location"
"Employee Number" "Given Name" "Family Name" "Months in Service"

The report, as it is now, displays all work locations and the above employee info except the calculated data.

I've read up on using calculated fields in tables, and I'd prefer not to take this approach.

View 5 Replies View Related

Reports :: Calculated Field In A Report

Jan 27, 2015

I have a database which gathers and stores the odometer readings of our company vehicles every month. I have built a simple report with columns for Vehicle Number, Employee Number, Employee Name, Month, and Odometer Reading. My boss wants a field for each employee which compares the records for the last two months and displays the difference (i.e. the number of kilometers travelled in that month) /

View 2 Replies View Related

Reports :: Summing Calculated Field In A Report?

Jul 17, 2015

I have a report that has four fields: Item, Qty, Price and TotalPrice for each line in the detail section. Total Price is calculated by multiplying Qty x Price. The text box name that holds the Total Price for each line is txt_TotalPrice. I want to have a Grand Total in the report footer. I placed a text box in the footer with the following expression: =sum([txt_TotalPrice]). When I run the report Access prompts me for the parameter value of txt_TotalPrice. I've been trying to solve this for quite a while now - but I'm totally baffled.

View 3 Replies View Related

Reports :: Round Up Calculated Field In Report

Jun 25, 2013

I have a report and I am trying to Round Up the calculated field SumOfAccrual Amount to 2 decimal places. I am attaching a screenshot of my report and output.

View 2 Replies View Related

Reports :: Calculated Field Showing Blank

Feb 11, 2014

I'm working with a report that totals the number of times a topic is returned from a query. If a topic is not returned at all, i don't want it to show at all. Currently it is showing a blank field for that topic name and blanks in the count as well. Here's the filter i've put in to pull the right data out of my query: =Sum(IIf([Caller Used Resources]="No",1,0))

View 2 Replies View Related

Negative Value Formatting In REPORTS With Calculated Field

Nov 11, 2012

I am completing a report. I've inserted a calculated field in the report. I'm using Access 2010. Here is an example:

=([AccessTotalsOpen]-[AccessTotalsClose])/[AccessTotalsOpen]

I get the correct answer but cannot find a way to Display/FORMAT a negative number with any of the options that I have available to me?.

Any method to format a calculated field in a report?.

I tried this example but could not get it to work. =Format( FIELD ), " 0; (0)";

View 3 Replies View Related

Calculated Data In Text Box Update To Table?

Mar 29, 2006

I have a textbox on a form that displays a calculated number with regards to input from other text boxes.

I need this calculated number to update to a corresponding field within a table.

I have a button that updates the information, but the calculated field will not update.

I have an "=" expression written that does all of the calculating. When I put this in the 'control source' it calculates and displays on the form perfectly, but will not update the table. If I change the control source to the field within the table and then move the "=" statement/expression someplace else....the field is blank on the form, but I can manually input a number and it will update to the table.

Follow?

View 1 Replies View Related

Calculated Field Based On SQL In Text Box

Feb 13, 2005

Hello, Bit of a newby to all this. Am trying to use a text box as a calculted field. I am doing so using an sql statment in control source The sql stat is built and tested using build query and then copied and pasted from sql view)

I keep getting #name? as an error.

I have managed using dlookup of the same saved sql to return the required value (which works) but find it to be a bit slow and clunky so wanted to give this a go instead. If somebody can have a look at the query below I would much apreciate.

=(SELECT Sum(QryInout!CostExVATGBP) AS TTlCostExVATGBP
FROM QryInout &_
WHERE (((QryInout.StockImportNoJoinToAll)=[Forms]![FrmSPurch]![ImportNoNew])) &_
GROUP BY QryInout.ProdType &_
HAVING (((QryInout.ProdType)="Freight"));)

Note that I have tried with and without the &_ and also with or with out the brackets..

Thanks

View 4 Replies View Related

Reports :: Sum Of Calculated Field In Hours / Minutes Format?

Sep 1, 2013

I have a table of timecards each recording minutes spent on each task for each client and I have summed those minutes by client in a query.I have then in the same query converted each sum of minutes to hrs:mins format using this calculated field:

HrsMins: [SumOfMinTime]60 & Format([SumOfMinTime] Mod 60,":00")

So this turns e.g. 261 minutes into 4:21..Based on that query I have a report showing total hrs:mins spent on each client, e.g.

Smith 4:21
Jones 5:32
James 1:23

Now I want to show a total at the bottom, i.e. in the above example it would be 11:16.So for the control source for a total field on the report I tried:

=Sum([HrsMins])

But when I do that I get an error message: "Data type mismatch in critieria expression"I may be because I am trying to sum calculated fields amounts that are calculated using a function.Or it may be that the format is not being recognised as hours and minutes and thus cannot be added up.way in which I could get a total here in hours and minutes format (hrs:mins).

View 5 Replies View Related

Reports :: Print Calculated Field Off Of Form To A Report?

Jul 18, 2013

Basically i have a form where i get info from multiple tables. On the main form itself i have 3 calculated fields for hours where i add all the hours i choose (from a subform) onto the main form.

My issue is i can create a query to come up with all the fields for my report, but how do i get the calculated fields on my main form on the report? Is there a way to print the calculated fields on the main form to a report? or do i have to do the same calculations on the report itself?

View 4 Replies View Related

Reports :: Calculated Field Not Displaying Correctly On Subreport

Sep 14, 2014

I have been trying to figure out why my subreport is only showing sales price for only one of the records on my subform. Everything else works as it should, but it only displays the sales price for the record which is active on the subform.Attached is the database with the subreport called rptProposalItems with the field 'Sales Price' which is experiencing the issue.

View 7 Replies View Related

Reports :: Can Fetch Calculated Field From A Form In A Report?

Mar 24, 2014

I have a form which works good enough. In this form, there is a text box that counts and calculates records from a subform. The name of this text box is "text1" ...

Can I fetch this "text1" field in a report ?

View 10 Replies View Related

Reports :: Rounding A Calculated Field (Nearest 3 Decimals)

Apr 17, 2013

I have a field that sums pounds. I need to convert this to tons (rounded to the nearest 3 decimals), then multiplied by $67.50. This will calculate a fee payment.

This is what I have now:

Code:
=Round(Sum([Hazardous_Waste]/2000*67.5),3)

The total pounds is 2675.

After dividing by 2000, Access generates a number of 1.3375. It rounds 1.3375 to 1.337 which generates an incorrect final total. Not sure how to alter this to round properly.

View 9 Replies View Related

Reports :: Changing Format In Calculated Field (whole Number)

Apr 22, 2015

I have a calculated field in a report, which is as follows:

=IIf(IsNull([POI_E1A]),(([TodaysDate]-[EADDate])/365)/3,[A1]+[T2]+[A3]+[T4]+[A5]+[T6]+[A7]+[A8])

The calculation works fine; however, I only want to show the whole number (not rounded up; not rounded down). In other words, if the result is 0.9967, then I want 0 to appear.

I cannot figure out how to make this happen. In the properties section I ensured the format was "general number" with 0 decimal places but this didn't change the result. I tried changing the format in the calculated field, again, I wasn't successful.

View 5 Replies View Related

How To Use A Calculated Field To Get Average Of 4 Text Fields

Sep 2, 2013

I have 4 texts fields [DEVICE INSTALL] , [INSTRUMENT STAND], [BRACKETS RACEWAY SUPPORTS], [TUBING CAPILLARY] all can be either a percentage from 1-100 or "N/A" except [DEVICE INSTALL].I would like to calculate the [percentage complete]

my calculation in the field is as follows:
([DEVICE INSTALL]+
IIf([INSTRUMENT STAND]="N/A",100,[INSTRUMENT STAND])+
IIf([TUBING CAPILLARY]="N/A",100,[TUBING CAPILLARY])+
IIf([BRACKETS RACEWAY SUPPORTS]="N/A",100,[BRACKETS RACEWAY SUPPORTS]))
/4

this seems to work to a degree. but for some reason when the [INSTRUMENT STAND] value is not "N/A" the percentage calculated is a wacky value much higher than 100. how could I possibly change my division #?

View 4 Replies View Related

How To Make Calculated / Concatenated Text Field Unique

Feb 12, 2014

I have a calculated field which consists of a few other fields concatenated, i.e. [field1] = [field2] & [field3] & [field4].

I need field 1 to be unique when its concatenated, but fields2-4 don't need to be unique. Is there a way to do this?

View 3 Replies View Related

Forms :: Stop User From Leaving Field Without Selecting Item / Entering Data?

Aug 29, 2013

how to stop user from leaving field without selecting item or entering data

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved