I have a production report with 4 one to many sub reports (material reworked, reclassified, rejected, and issued). Each of those sub reports has a sum field totaling up the material reworked, rejected, etc for that lot.
I need a calculated field that subtracts the totals in each sub report from the reported amount produced in the main report.
Should I do this with a calculated field on the report. If so how would I reference the summed fields in the sub reports?
Or should I put a summed field of the amount reworked, rejected, etc in the query the report is based on and make a calculated field off that.?
I have a report with several subreports that occassionally grow. I also have several fields that don't grow. If my subreport grows, it moves any other fields down as well. These are fields that are below the subreport, but not beneath it (e.g. on a lower line, but to the left).
Is there any way to keep the other fields stationary?
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are:
VehicleReading PreviousReading VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers,
= [VehicleReading]-[PreviousReading]
and also a calculated field named Consumption,
=[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail.
I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
I know I need to get those zero's to fail in the calculation but as I said before all of the suggested expressions I have tried fail due to syntax!
I have created a report in Access that calculates the dates based on a date-type field in a query. I want to be able to use these calculated dates in another report and sort these dates in an ascending order. With the dates, I also want to display certain information from this report. Is it doable? Please let me know....ASAP if poosible...
This Works:I have a report with subreports that provide totals to the main report. The main report is grouped to provide the totals by customer. Here is the format:
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are: VehicleReading PreviousReading VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers, = [VehicleReading]-[PreviousReading]
And also a calculated field named Consumption, =[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail. I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
However I keep getting error messages and despite troubleshooting and looking on the internet I can't seem to find a solution to this.
I'am working with tables of loan associates, customers, companies and States versus numbers and amounts in my report and I want to create a main report with a subreport within it which shows the number of customers and their respective state that a loan associate has either written a new loan or serviced that customer and a total for each loan associate? Is there a report template out there that could address this for a complete report?
I have created a simple booking DB, i am try to summarize the booking by centre and date so that when a user checks if there is availability the will be able to see how many have booked an activity and how many spaces are left, i have created a new field that calculates the spare places
I have a report with a number of calculated fields, and information that is pulled from the form that calls the report. Pulling the information is done in the Report_Load() event by setting the report.txtBox = Form.txtBox. When I open the report in acPreview all the calculated fields are populated as they should, and when I open the report in acNormal mode (which is what I want) the calculated fields remain blank.
I have calculated fields on my tables and used zero values as default to show totals. But when I view my report, all the zeros appear. Don't want those zeros to appear on the report.
I am trying to create a two-page report. I used a document entitled "Sophisticated Reports: Multiple Columns and Subreports" by Rich Gorvin to get where I am now. I created two (2) separate tabular subreports representing each page then placed them into a master report using a common group header as suggested in the paper. While the two (2) separate subreports print out in the desired tabular format, they do not do so in the master report document. The first page prints out just fine but the second page prints out each line of the table separately.
I am attaching a word document of the form I'm trying to re-create in Access.
So I created a master report (in design time) and added subreports using VBA and now I get the components in the correct sequence, but how do I get the data to show up correctly because at run time the same query runs for each subreport component and I end up with the above sequence.
Defining the subreport query at design time won't work because then the subreport for a particular component will show the same data.
I need each subreport to recognize which data to show at run time - but I am not sure how to accomplish this.
I'm trying to stay away from duplicating subreports in the case where the same components are selected.
In my database, I have a report called "rptEventsbyEmployee" and in that a subreport called "sbrptEventsbyEmployee". The master/child link is the employee name. Everything is fine until you get to page 3 where the subreport shows twice.
I have a database (Access 2007) that handles a large number of consultants. Each consultant has a number of skills, has worked in a number of countries, and speak several languages. As contracts come in, I wish to generate a report based on the skill set, language and country/countries that best suits the contract; thereby identifying a group of most suitable consultants. I have designed a report with three sub reports for skills, languages and countries. Each sub report is linked to the main report through Link Master/Child fields using the ConsultantID. That's all fine; I get a report showing all consultants listing all their qualities.
Now, I want to be able to filter the sub reports on the three aspects: Skills; Countries; and Languages.
In the past, for other applications, and with the unfiltered form in preview I have used a popup form with unbound Combo Boxes to generate a string to use in the reports filter. I think I got that technique from Allen Browne, and it has really served me well.
Now, however, I can't use this technique since I can't set the filter for the sub reports. I thought that I might be able to use the Link Master Field with text boxes on the main report, but haven't managed to figure that out.
I've narrowed my problem to a subreport that prints multiple copies of the report based on the number of items generated in the subreport.
i.e. If I have an instructor registered to teach three classes in the subreport, the main report will print three time (identical). An instructor with two classes will print twice (identical).
No button...just good old "print" how? why? where?
I have created a report that includes 4 subreports. The subreports are displaying survey results from 4 different survey channels. New survey data is added to the tables monthly so the subreports will grow in size. Is there a way to have the subreports automatically resize and push down the subreport below? Currently what is happening is a subreport will grow and the additional data disappears underneath the next subreport. Is there a better way to create a report that displays information from multiple reports that will change in size?
I am relatively new to Access. I am having difficulty summing up totals and bringing them into the main report. To be more specific I have two sup reports called WOExpenseTotalSubreport and WOServiceTotalsubreport. These two subreports are based off of queries that gather the description, price and qty of either services or expenses and then produces a "total" for me on the query.
When I bring these two queries into a report as sub reports I am able to Sum the "total" field in the subreport footer which works fine. What I would like to do is add those two totals together for a grand total on the main report. The two summed fields are called ExpensesSum and ServicesSum. It seems most things I have tried do not produce an expression error but the result is either #error or #name? Here are a few different scenarios I have tried both on the main report details section as well as the footer section.
I have three reports that I have used as the subreports for one master report. The master report shows the three subreports on a page.
When one or more of the subreports contains no data the master report still shows the empty subreport. I would like subreports with no data to be left off the master report if this is possible.
For each of the individual subreports I have used the On No Data event to display a message and then not open the report if there is no data. This works fine for the individual subreports but when I open the master report the "empty" subreport is still displayed.
Is there a way to leave the subreport off the master report when there is no data in the subreport?
I have a report with an embedded subreport. It's set up in two columns, ordered across then down.
My problem is when column 1, row 1 section is taller than column 2, row 1 section. It creates a lot of extra white space as I fill in the rest of the report. Is there a way to eliminate that space or am I stuck?
My employer is using Windows XP Pro and Office 2003 (a few machines have Office 2010, but not mine). Furthermore, the machines are running the Japanese language OS, which has caused some comparability issues with my English XP/Office 2003 at home.
I have a form containing an unbound textbox, with the name MIS. The form's Current event has the following code:
If IsNull([[ResignationDate]) Then MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd")) ElseIf [ResignationDate] > Date Then MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))
[Code] .....
The calculates (correctly) the Months in Service of the employee who's information is being viewed.
Now, I am trying to create a report which lists the employees by work locations. The above , and other calculated information, is to be displayed in the report.
I used the wizard to create the report, using data from two different tables (employee & location).
I need to display the calculated information above for every employee at every location.
I have a textbox in a report that I would like to calculate the sum of values that are less than 600.Then have a second textbox that counts the number of records that have values less than 600..This is based off of a query with calculated fields..I have been working with a formula that looks something like this
=Sum(IIf([BaleETime]="<600",0))
But all I get is a value of 0.BaleETime is the elapsed time between bales.
I have a database which gathers and stores the odometer readings of our company vehicles every month. I have built a simple report with columns for Vehicle Number, Employee Number, Employee Name, Month, and Odometer Reading. My boss wants a field for each employee which compares the records for the last two months and displays the difference (i.e. the number of kilometers travelled in that month) /
I am trying to create a calculated field in a query, that shows money owed from customers. I have 4 different job codes that have their own prices. I also have customers with the amount of hours they owe for, for each job. There are two customers that owe for two different jobs. I know how to write in : Money Owed: [price per hour]*[number of hours]. but i want to have only one line for each customer when i run the query. How do i combine??
