I have a form which works good enough. In this form, there is a text box that counts and calculates records from a subform. The name of this text box is "text1" ...
Can I fetch this "text1" field in a report ?
Basically i have a form where i get info from multiple tables. On the main form itself i have 3 calculated fields for hours where i add all the hours i choose (from a subform) onto the main form.
My issue is i can create a query to come up with all the fields for my report, but how do i get the calculated fields on my main form on the report? Is there a way to print the calculated fields on the main form to a report? or do i have to do the same calculations on the report itself?
I have a database which gathers and stores the odometer readings of our company vehicles every month. I have built a simple report with columns for Vehicle Number, Employee Number, Employee Name, Month, and Odometer Reading. My boss wants a field for each employee which compares the records for the last two months and displays the difference (i.e. the number of kilometers travelled in that month) /
View 2 Replies View RelatedI have a report that has four fields: Item, Qty, Price and TotalPrice for each line in the detail section. Total Price is calculated by multiplying Qty x Price. The text box name that holds the Total Price for each line is txt_TotalPrice. I want to have a Grand Total in the report footer. I placed a text box in the footer with the following expression: =sum([txt_TotalPrice]). When I run the report Access prompts me for the parameter value of txt_TotalPrice. I've been trying to solve this for quite a while now - but I'm totally baffled.
View 3 Replies View RelatedI have a report and I am trying to Round Up the calculated field SumOfAccrual Amount to 2 decimal places. I am attaching a screenshot of my report and output.
View 2 Replies View RelatedI'm creating a report to check for over- or under-stocked items. The report is working fine, gets all the records etc. except that it thinks that the OnHand field from my inventory query is text or something, at any rate not a number. I have successfully set the format of the field in the query to General Number, but that doesn't seem to have worked. Here's the SQL for the report:
Code:
SELECT DISTINCT Signs.SignCode, Signs.SignDescr, Size2.XYdim, qryOnHand.OnHand, Bins.Rack, Bins.Level, Bins.BinNum
FROM (Size2 INNER JOIN (Signs INNER JOIN (Items INNER JOIN qryOnHand ON Items.[ItemsID] = qryOnHand.[ItemsID]) ON Signs.[SignID] = Items.[SignID]) ON Size2.[SizeID] = Items.[SizeID]) INNER JOIN (Bins INNER JOIN InventoryDetail ON Bins.[BinID] = InventoryDetail.[BinID]) ON Items.[ItemsID] = InventoryDetail.[ItemsID]
WHERE (((qryOnHand.OnHand)<=[Check for signs with fewer than:]));
I have a report with a calculated field. This calculated field needs to pull the value or total from a field in another report. I think the formula is :
=([AssmntC].Reports!totalreqamnt4)
but I'm getting ?Name as the result.
The report is AssmntB where I need to have the value copied.
The original report is AssmntC and the field is totalreqamnt4 where the value is originally calculated.
totalreqmant4 is also a calculated field which sums fields from a query.
Help with the formula? please?
My employer is using Windows XP Pro and Office 2003 (a few machines have Office 2010, but not mine). Furthermore, the machines are running the Japanese language OS, which has caused some comparability issues with my English XP/Office 2003 at home.
I have a form containing an unbound textbox, with the name MIS. The form's Current event has the following code:
If IsNull([[ResignationDate]) Then
MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))
ElseIf [ResignationDate] > Date Then
MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))
[Code] .....
The calculates (correctly) the Months in Service of the employee who's information is being viewed.
Now, I am trying to create a report which lists the employees by work locations. The above , and other calculated information, is to be displayed in the report.
I used the wizard to create the report, using data from two different tables (employee & location).
I need to display the calculated information above for every employee at every location.
Example:
"Work Location"
"Employee Number" "Given Name" "Family Name" "Months in Service"
The report, as it is now, displays all work locations and the above employee info except the calculated data.
I've read up on using calculated fields in tables, and I'd prefer not to take this approach.
This Works:I have a report with subreports that provide totals to the main report. The main report is grouped to provide the totals by customer. Here is the format:
Customer Labor Materials LineTotal
Cust1 $100 $10 $110
Cust2 $200 $20 $120
Cust3 $300 $30 $130
[Labor] - ControlSource =IIf([rptSchedE_STS_Sum_Installs].[Report].[HasData],[rptSchedE_STS_Sum_Installs].[Report]![TotalExtInstall],0)
This doesn't work:
I am trying to create totals for each field (i.e. LaborTotal = $600, see below)
Customer Labor Materials LineTotal
Cust1 $100 $10 $110
Cust2 $200 $20 $220
Cust3 $300 $30 $330
Totals $600 $60 $660
I've tried the following each resulting in #Error:
ControlSource =Sum(IIf([rptSchedE_STS_Sum_Installs].[Report].[HasData],[rptSchedE_STS_Sum_Installs].[Report]![TotalExtInstall],0))
ControlSource =IIf([rptSchedE_STS_Sum_Installs].[Report].[HasData],Sum([rptSchedE_STS_Sum_Installs].[Report]![TotalExtInstall]),0)
ControlSource =IIf([rptSchedE_STS_Sum_Installs].[Report].[HasData],Sum(Nz([rptSchedE_STS_Sum_Installs].[Report]![TotalExtInstall],0),0)
I have an invoice system, where the payment due date is the last working day of the month following the invoice.
For example, if I produce an invoice on 5th June, the payment will be due on the last day of July. What I can put in a text box to automatically calculate that date, based on the Order date?
This is the order date formula : =[Forms]![frmInvoiceMain]![txtOrderDate]
I have a report and in the footer I have added a text box (Textbox136) to work out the average percentage of the field [Percentage], which works fine.
For the value in textbox136 I want to output a grade and want to use an IIF function in the control source, something like:
IIf([Textbox136]>=100,"A+",IIf([Textbox136]>=90,"A+",IIf([Textbox136]>=80,"A",IIf([Textbox136]>=70,"B",
IIf([Textbox136]>=60,"C",IIf([Textbox136]>=50,"D",IIf([Textbox136]>=40,"E",IIf([Textbox136]>=30,"E-","U"))))))))
But it won't work.
I have a field I need to create on my report that needs to be based on what is in another field on my report.
If Note (that's my field name) = 1,2,3,4,5, or 6, I want to sum a field called PlateNumbers.
What is the syntax?
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are:
VehicleReading
PreviousReading
VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers,
= [VehicleReading]-[PreviousReading]
And also a calculated field named Consumption,
=[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail. I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
However I keep getting error messages and despite troubleshooting and looking on the internet I can't seem to find a solution to this.
I have a report with a number of calculated fields, and information that is pulled from the form that calls the report. Pulling the information is done in the Report_Load() event by setting the report.txtBox = Form.txtBox. When I open the report in acPreview all the calculated fields are populated as they should, and when I open the report in acNormal mode (which is what I want) the calculated fields remain blank.
View 6 Replies View RelatedI have calculated fields on my tables and used zero values as default to show totals. But when I view my report, all the zeros appear. Don't want those zeros to appear on the report.
View 1 Replies View RelatedHi. I have a calculated field in a form. I wonder if the result could be shown in a report?
The form field determines an age category based on date of birth entered. The expression in the form field is
=IIf([child age fall]<=1.49,"Infant",IIf([child age fall] Between 1.5 And 2.49,"Toddler",IIf([child age fall] Between 2.5 And 4.99,"Preschool","")))
Is there a way to have this result show in a report? Thanks.
I'm working with a report that totals the number of times a topic is returned from a query. If a topic is not returned at all, i don't want it to show at all. Currently it is showing a blank field for that topic name and blanks in the count as well. Here's the filter i've put in to pull the right data out of my query: =Sum(IIf([Caller Used Resources]="No",1,0))
View 2 Replies View RelatedI am completing a report. I've inserted a calculated field in the report. I'm using Access 2010. Here is an example:
=([AccessTotalsOpen]-[AccessTotalsClose])/[AccessTotalsOpen]
I get the correct answer but cannot find a way to Display/FORMAT a negative number with any of the options that I have available to me?.
Any method to format a calculated field in a report?.
I tried this example but could not get it to work. =Format( FIELD ), " 0; (0)";
I am "OK" when it comes to figuring out a formula in Excel, but Access is much different for me. I am looking to set up a calculated field in a report.
The result is find the Client-to-Staff ratio but there are two possible conditions:
CONDITION 1: If VacantFTEE = 0
ActiveClients / (DirectFTEE + DetailedFTEE + ProvidedFTEE)
CONDITION 2: If VacantFTEE > 0
ActiveClients / (DirectFTEE + VacantFTEE + DetailedFTEE)
I am presuming I need some sort of IF/OR statement to make this as 1 formula, but I can't seem to make it work.
I have a table of timecards each recording minutes spent on each task for each client and I have summed those minutes by client in a query.I have then in the same query converted each sum of minutes to hrs:mins format using this calculated field:
HrsMins: [SumOfMinTime]60 & Format([SumOfMinTime] Mod 60,":00")
So this turns e.g. 261 minutes into 4:21..Based on that query I have a report showing total hrs:mins spent on each client, e.g.
Smith 4:21
Jones 5:32
James 1:23
Now I want to show a total at the bottom, i.e. in the above example it would be 11:16.So for the control source for a total field on the report I tried:
=Sum([HrsMins])
But when I do that I get an error message: "Data type mismatch in critieria expression"I may be because I am trying to sum calculated fields amounts that are calculated using a function.Or it may be that the format is not being recognised as hours and minutes and thus cannot be added up.way in which I could get a total here in hours and minutes format (hrs:mins).
I have been trying to figure out why my subreport is only showing sales price for only one of the records on my subform. Everything else works as it should, but it only displays the sales price for the record which is active on the subform.Attached is the database with the subreport called rptProposalItems with the field 'Sales Price' which is experiencing the issue.
View 7 Replies View RelatedI have a field that sums pounds. I need to convert this to tons (rounded to the nearest 3 decimals), then multiplied by $67.50. This will calculate a fee payment.
This is what I have now:
Code:
=Round(Sum([Hazardous_Waste]/2000*67.5),3)
The total pounds is 2675.
After dividing by 2000, Access generates a number of 1.3375. It rounds 1.3375 to 1.337 which generates an incorrect final total. Not sure how to alter this to round properly.
I have a calculated field in a report, which is as follows:
=IIf(IsNull([POI_E1A]),(([TodaysDate]-[EADDate])/365)/3,[A1]+[T2]+[A3]+[T4]+[A5]+[T6]+[A7]+[A8])
The calculation works fine; however, I only want to show the whole number (not rounded up; not rounded down). In other words, if the result is 0.9967, then I want 0 to appear.
I cannot figure out how to make this happen. In the properties section I ensured the format was "general number" with 0 decimal places but this didn't change the result. I tried changing the format in the calculated field, again, I wasn't successful.
Hi,
I have a field in a form which displays the Sum of 10 values from other textboxes. I want to display the values of that calaculated field in a report and somehow I am stuck. I am running the report based on a query.
How would I get those field calculation values to display in a report?
Thanks
dfuas
I would like to append a text item to each value in a calculated field. consider the field name is "Division" and I want to append the word "Division" to the values put out by the field "Division"
My attempt was: Division & " " & "Division". This produced an error in the report.
I have a form that is used for data entry; from there I want to create a new form where I can select a field from a combo box which would generate the amount associated.
Example on the first form it has a Carpenter that has a calculated output of $1000, on the second form I would want to click on the combo box and pick carpenter and I would like the calculated field to be shown next to it.
I tried making an if statement on an unbound box but I found it difficult
=IIf([Combo2]=Building Service Engineer, =[Forms]![Estimate]![Text787],IIf([Combo2]=Carpenter,
=[Forms]![Estimate]![Text788],IIf([Combo2]=Custodian,
=[Forms]![Estimate]![Text789],IIf([Combo2]=Custodian - Shift Pay (5am - 6am) ,
=[Forms]![Estimate]![Text790],IIf([Combo2]=Drafting Technician,
[Code] ......
[Text787]-[Text805] are fields from the first form, these are calculated fields that multiplies wages quantity etc.
Also [Combo2] wont let me pick any data that I typed in.