I've got a report, which on the screen is three chrts and a page break in between. Page is set up to print landscape.
When I print the report or save to pdf it adds a lot of pages in between 2 and 3. It seems to be of chart no.2 getting smaller and smaller. I've attached a copy of the pdf so you can see what I mean.
I have created a database that tracks production by individuals. I have also created a report which includes a pivot chart to give the user a chart view of production.
In the pivot filter of the chart I have associate names, where the user can click all, or individual associates, to see individual production.
The trouble I am having is when the user goes to print the chart, it will only print the chart with the "All" filter view. Even if the pivot chart is filtered to one associate, it will print like "All" was checked.
Is there a way to allow the report/pivot chart to only print the production for the individual who is checked within the pivot filter?
I have a report where the detail section, holding 4 subreports, takes up 5 inches in the middle of the page between the header and footer. We want the entire 5 x 8 area enclosed in a box on every page. I have tried to achieve this by putting a line in the Detail_Format section:
Code: boxDetail.Height = 5 * 1440 * Pages
However, when I run the report, I get pages 1/3 correctly, then 2/3 and 3/3 with no detail section or box, and then pages 4/3, 5/3, and 6/3 with blank detail sections and no box. If it's a 1-page report, the same - page 1/1 is perfect and page 2/1 is blank, no data and no box. I also sometimes (but not always) get overflow errors from the Detail_Format event.
I know it's not a margin error because that would be every other page, and the page count wouldn't be doing that. (Still, I have scrupulously checked every margin, and they all look fine.) Getting this look on the report is a priority. Any way to achieve the same result with the box without causing the missing data and extra pages?
Have a generic dashboard report with multiple charts in it. One in particular is a bar chart, but depending on what the dashboard is produced for, the bar chart may have too many bars in it to make it legible. Therefore I'd like to conditionally determine the number of bars (basically the number of records in the query) and then make the chart go from one page and continue onto another.
I need to create a report with multiple subforms. I set up my first report and then I believe I need to add "more detail" sections or another page to this report so i can drag in my additional forms.
How do i separate out sub forms? Ideally I will want to have the main table on the top then the sub form in the middle, then the next on the bottom of the page.
I have a form where user can chose his own criteria for the report, like time period, ppl involved and other parameters. i open report filtered with these conditions. I also create a nice text (as public variable) bout what where the search criteria and put it in the header/footer. Then I export the report as xls file. it's nicely saved as column names and data, just what i need.how to add a field that would store the criteria, ie that string public variable that has it all neatly explained?
I am having a problem with the code in the Close event on a report when asking the user if they want to view additional reports after closing the current report in preview. Report Closes after the Yes/No answer is selected. If yes selected it does nothing. If No is selected it does nothing, This code works fine in a data entry form after changing the close and open commands. Using Access 2010
Code Using Now.
Private Sub Report_Close() Dim IntAnswer As Integer IntAnswer = MsgBox("Would you like to View/Print additional Reports?", vbQuestion + vbYesNo, "Yes") If IntAnswer = vbYes Then
I have already created a summary report that is one page long, however, every time I view my report in report view, export to PDF or print, the report has duplicate copies! Not blank pages. Just duplicate copies of my one page. The report is generating hundreds (about 700) of the same exact page. How do I force my report to have just one page.
I'm working with getting a 3 page report to print/create PDF of the 3 pages. Right now I have the formatting set up for the 3 pages but each is an individual report.Is there a way to combine the reports into a single report? I've been messing around with subreports but can't get it to display correctly.
Send only one or two pages of a multi-page report. I have a report that has three pages. I only want to send the first two as a pdf file. Can this be done with VBA? I know it can be done using Exporting Data on the External Data ribbon, but how can I do it via VBA?
I can not get my Access Report to give me a total number of pages by group. I've been able to have it give the correct page number per group but not the total number of pages in each group. I've looked at the threads and it appears that in order to get this, you must do a 2 part pass. 1st to get the page number and then to get the total papers per group.
I've used the code supplied and when I do a print preview, I get the message that it can not find the control, Me!ctlGrpPages. This is the control I created and placed in my page footer section of the report. I've also seen numerous references to the report, "Employee Sales by Country" in the Northwind database. I downloaded the database but could not find this report in the database.
I have a query written that has two numbers. One is the trucking fleet size (63) and the other is the average number of trucks used over a time period (in this example, its 52.2)..I just want to create a pie chart that has 52.2/63. so the pie would be roughly 90% filled.
I am working on a project that is requiring me to hide a subreport that happens to be chart graph, when the chart has no data and my problem is that I cannot seem to get the report to properly hide and show the label behind it when the data is not there. I am in need of a SQL code that will read my blank record source as a zero instead of blank. I have tried Nz, IsEmpty, and IsNull and none of them seem to work.Here is the current SQL code:
SELECT DISTINCTROW Sum(Case_review.ID) AS SumOfID FROM Case_review WHERE (((Case_review.[Type of Issue].Value)="Clinical"));
Here is the current VBA code (which is in event on load) for the main report:
If Me.Rpt_Clinical.Report.HasData = -1 Then Me.Label29.Visible = False Me.Rpt_Clinical.Visible = True Else Me.Label29.Visible = True Me.Rpt_Clinical.Visible = False
linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.
My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.
I have a report with one sub-report. It previews correctly and prints correctly from my ACCDB. However, when I create an ACCDE, the sub-report previews correctly and then does not print. I have tried the following and none work: In the main report, deleted the links and changed the subreports record source.
Changed layout for print to no Changed filter on empty matches to no
Moved everything from detail to page header.When I put code in the subreport to set a flag when loaded and queried that flag in the main report, the subreport never admitted to being loaded when run from the ACCDE (again works fine from the ACCDB).
I'd like to print out a report so that each record should be printed into an individual pdf file. When printing manually, record by record, I use an app called cuteprinter for converting reports into pdf. But that one needs saving path for each individual pdf file. What could I do if I'd like to make a series of record printing? Would there be a way of automatic generating path and file name for each record's print?
I have a popup form that prompts for a value and has a button defined with an OnClick,OpenReport with a WHERE clause. The value the user enters is placed in the WHERE clause.
The report is generated using a Query and the WHERE clause. I was very surprised -- it works!
Now I'd like to add a chart to the report that represents the information on the report. How can I do this without calling the query again? Can I somehow reference the information that's in the report?
I am having an issue with viewing a report. I have a button set up to show the print preview of the report. There is a chart based on the report's record source, and two sub-reports showing related data. The print preview section however shows the the chart area where it would appear is blank, i.e. there is a white area where the chart should go. There is no error message. The two sub-reports appear correctly. If I go to print the report, however, the chart appears, and it will also appear if I change the view type (e.g. to layout and back again).
I have a bar pivot chart made in a form this load fine, I have the below VBA code in place to control the bar color depending on what the bar show.
Set frms = Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0) Dim i As Long With frms For i = 0 To Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0).SeriesCollection.Count - 1 With .SeriesCollection(i).Name Select Case Forms![OtherCases created by Indv by Month
[code].....
When I then open the Report this is not working at all each bar just get a random color regardless what the bar show.how to convert the above to fit a Pivot chart form a form that is displayed on a report.
I have a query that has a field that reads DateReceived By Month: Format$([Workorders].[DateReceived],'mmmm yyyy') The criteria line is Like "*" & [Enter Month & Year (Leave Blank for all)] & "*" And this works when I run the query. If I enter october 2013 it shows only records for this date range like it should.
Then I built a bar chart report that will show the workorders only for the month entered. The problem is, If I leave this field in my query the chart does not update . When I open the chart it will prompt for the month and year but the data in the bar chart doesnt change. If I remove this field the chart updates as expected.
If I go into design view for the report and then right click on the chart and go to properties , then to row source, it reads as this:
TRANSFORM Sum([Workorders Query2].MyTime) AS SumOfMyTime SELECT [Workorders Query2].SerialNumber FROM [Workorders Query2] GROUP BY [Workorders Query2].SerialNumber PIVOT [Workorders Query2].[MXDPrinter];
If I click on the elipstical to go into query tools for this line , and click on run I get the error : The microsoft Access database engine does not recognize '[Enter Month & Year (Leave Blank for All)]' as a valid field name or expression.
So my criteria runs normally in the query and returns the correct records, but I can't get it to work in the chart .
I have an application where I have some users in the field with tablets and they deliver a package and the receiver will sign for it (like UPS or FedEx essentially). They sign my application and then the application saves the signature to a SQL Database in binary data. I'm using the Microsoft InkPicture ActiveX control to achieve this. After they sign, I have a line of code that equals:
Me.RecBySignature = Me.RecBySig.Ink.Save
This works fine and I can also recall the signature to the form when the form is re-opened.how to do is to put the signature on a report. Is there a way to "draw" the signature on the report? Or to print it to the screen?