On design, layout and report view, everything looks exactly how I want it. However, when I display it in Print Preview mode, checkboxes appear about the Project Name.There's nothing in my report to show that I have these checkboxes on the report. Where these could be coming from and why they only show in the Print Preview layout?
View RepliesI have a query that runs - off the back of this, a report. The query will show a name eg dave however the report will show Daves unique key (eg 3) and not just say dave how do I sort this?
View 2 Replies View RelatedI have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
I have a REPORT containing 7 ('columnar') subreports. Each subreport is to show showing a days worth of medical doses.... to visually represent a wall planner.
When the report loads - user enters a week value # via Inputbox(). This value is written to a TEMP table. Each subreport accesses this same TEMP table to retrieve the week # value. In the Recordsource for each subreport I have the following code :
SELECT * FROM GETPATIENTREADINGS_WEEK WHERE (((Format([DateR],'ww'))=DLookup("WeekVal","[TEMPTABLE]")) AND ((GETPATIENTREADINGS_WEEK.DayVal)=1));
... where the DayVal goes from 1...7 corresponding to the columnar position of each subreport on the display ie. for each day of the week.
The problem I am having is that when the report runs - I see the display showing the data from when the report was previously run. ie. I have to run the report twice to see the data for the correct week value entered. All the SQL works as expected when I run from Query view but when I run through VBA..
I created a Report from a query. The query shows the correct data that should be on the Report. I created the report to sort by Field A and then sum Fields D, E, & F. None of the query data shows up on the Report. I;m stymied as to why I can see data on a query, but the ONLY data that shows up on the Report is Field A. None of the summations show. All are blank with the box outline.
I've created the report 3x thinking I did something incorrect. Whatever it is, I did it 3x!
I have a subreport with bitmap files attached, the sub works great until I link it to the main report then the sub shows nothing.
View 2 Replies View RelatedOn report, date shows as: 5/23/2015
I want it to show as: 05/23/2015
The input date in main table has the same format as the fields without the '0'.
Property for all date fields appear the same...
I have a very simple report that is generated from a table. There are no queries associated with this report. When new information is entered into my table I run the report and the new information appears. It has been working correctly for months. Now all of a sudden after the new information has been entered it doesn't show in the report.
View 4 Replies View RelatedNeed to track donations in two areas. Have one query that tracks them in location A and one that tracks them in location B. Same query, no other difference. Report made on location A is fine. Made a copy of it and based it on the 2nd query--and I get a pop-up "Enter Parameter Value" for Last Name. The Last Name field is not in the query or anywhere in the report that I can find.
View 3 Replies View Relatedi want to open a report but only showing the result of one record in a sub form,
i have a field that is on all rows of the subform,[click to run] and what i want the user to be able to do is double click on this field and it will open the report with only the record information for that row displayed.
I have an Access 2010 database with a memo field formatted for Rich Text.
I created a simple form. It accepts and shows paragraphs, i.e. I press Return and a new paragraph appears (with a blank line in between paragraphs).
I then created a report based on the same fields. In the memo field it shows the text entered in the form, but not the paragraph breaks. It just shows one big block of text without any paragraph breaks. I have looked for a field property in the report design and layout views that might affect how the text is displayed in the report but I cannot find one.
It is not much use if you can input paragraph breaks in a form but not see them in a report.
I have a check box in a form (set to yes/no in the table) and when I generate a report I would like the check box value to show up as yes or no in text box, but I can't seem to figure it out.
View 3 Replies View RelatedI have 10 unbound textboxes with the Tag Name "LoopID" in my report. I have to display the "PatientNumbers" field from the table tblPatient in those text boxes. Below is my code.
When I run the report, I get the error message: Run-time error '2448.' You can't assign value to this object and the code "Ctl.Value = rst!LCANumber" is highlighted.
Private Sub Report_Current()
Dim strSql As String
Dim dbs As Database
Dim rst As Recordset
Dim x As Integer
Dim Ctl As Control
strSql = "Select PatientNumber from tblPatient"
[Code] ....
I've made a query and designed a report for it. Simply it includes:
Area code, customer name, other customer details.
I want other people, when they click on the report to be given a drop down box which allows them to choose a specific area code before it generate the report. So, for example, they just want to look at Yorkshire region records, they choose Yorkshire from the drop down box and it'll generate the Yorkshire report. I've searched around but can't find what these are called.
I have created a report with the report wizard in Access 2007 that includes a check box. The check box is located under the label but to the far left side. How can I center the check box under the label?
View 10 Replies View RelatedI have a Table of Special instructions. Each type of a Yes or No Text Box. There are 13 items in this table along with the ID key.
Each Field has a Special Description. I used the Y/N format for ease of use for user input to simply select the applicable options.
However, I need the text description to display on the printed report, which is not the problem.
So i created a separate text box for each item that simply says; If True, "Description", else blank. And named each one sp1...sp14.
So now, I want to take these text boxes with the proper descriptions and string them together.
My formula is: =Trim([sp1])&" "&([sp2]) etc.
This does produce the proper text results, however, and oddly enough, each item displays on its own line rather than in a string.
I get:
SP1
SP1
Instead of the desired result of SP1 SP2
This seems to simple, and probably has to do with the yes/no format. I've tried with and without (), and using + instead of &, and to troubleshoot, I eliminated the " ". No luck. Everything is coming back as a single column.
in my report I have table made from 25 fields (5x5) and they all have the Can Grow Option turned on.
However the lines and boxes separating the fields do not grow with my fields and I get plenty of intersections and over lapping.
Is there a way to make boxes and lines grow with the text box?
I am having trouble creating a chart within a report. Let me start off by explaing my report.
I have many unbound textboxes on my report that all have the code very similar to this:
" =Count(IIf([Complaints Table]![Month]=1,IIf([Complaints Table]![Decision - Our Favour? (Y/N)]="Y",0))) "
This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.
What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .
I am using Access 2010 (self taught and continuing to learn each time I get asked for a new report). I have created a query based on the data being selected from two combo boxes on a form, ie start date and end date. The report works as it should but I want to be able to automatically use the dates in the report heading. For instance, Summary Report from xxxxx to xxxxx, where xxxxx is the start and end dates that the user entered into the two combo boxes.
The date field on my query reads
Between [forms]![F - CboReportDates]![Start Date] And [forms]![F - CboReportDates]![EndDate]
I have a report and within the report I have added some text boxes with some simple logic such as sum, count, etc. These text boxes function well as long as the logic is referencing existing fields. The minute I try to have a text box reference another text box I get the "Enter Parameter Value" box pop up. I don't understand this as the text box I am referencing has a vaule based on what it is referencing.
Example: 1st text box control source =Sum([existingfield]) I get a value.
2nd text box control source =[existingfield2]/[1st text box] I get "Enter Parameter Value" of 1st text box.
Attached I have a database that I've been working on which has a form called "frmCriteriaSearch". It is based off of the qryCriteriaListBoxUpdate query. I am trying to get the listbox in the second tab of the results section to work. It queries fine for the checkboxes, but I cannot get the comboboxes to affect the query (unless a checkbox has already been selected)
View 6 Replies View RelatedI am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub
[code]...
I'm trying to create a form which filters a report based off of combo boxes selected by the user. The code I'm using currently is:
Code:
DoCmd.OpenReport "rptProgramAttendees", acViewReport, , "ProgramIDFK = " & cboProgramTitle
This works great to return a report if the user selects something from the combo box. How do I adapt this so that the user can also leave the combo box blank and filter the report to return all records?Additionally, what if I want to have the user filter between dates selected on the form; i.e. between 'txtStart' and 'txtEnd'
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedHi,
I added some new controls into existing form. I made sure I added those new control names to Table source as well. For some reason, I dont get the values either in the form or in table. Please help. Thanks.
By the way, how can I attach an attachment in this forum. This if first time for me in this forum.
I have a form with a check box among other itmes. What I want to happen is, when the user checks the check box, I want the text box to the right of it to be made visible and to let the user write text. But I only want this text box to be visible when the check box is checked. The check box is if the user wish to put a comment in the form, he will click the check box and then I want my text box to appear so that he may write the comment in the text box. Please help with this. Thanks
View 3 Replies View Related