I have a check box in a form (set to yes/no in the table) and when I generate a report I would like the check box value to show up as yes or no in text box, but I can't seem to figure it out.
View RepliesOn design, layout and report view, everything looks exactly how I want it. However, when I display it in Print Preview mode, checkboxes appear about the Project Name.There's nothing in my report to show that I have these checkboxes on the report. Where these could be coming from and why they only show in the Print Preview layout?
View 2 Replies View RelatedI have created a report with the report wizard in Access 2007 that includes a check box. The check box is located under the label but to the far left side. How can I center the check box under the label?
View 10 Replies View RelatedI have a check box on a form. when the box is check, that means "yes" when it is unchecked, it means "no".
i have two reports, one that is a snapshot and one that is converted to microsoft word. in On the snapshot report, i am able to display the checkbox. on the report that is converted to microsoft word, i am not able to include the check box, becuase the checkbox will not convert to word on the report. to fix this, i changed the "yes/no" field on my table to a text box, instead of a check box. so now my table would display a "yes" or "no" depending on if the box was checked on the form. I figuered, that since now, the tables were showing "yes" and "no" i could just include a field on my report that would show "yes" or "No" for the word report. But when i did this, for all the records that are "yes" the field displays "-1" and for all the records that are "no" the field displays "0" how do i get my report to dislplay "yes" or "no" if the box is checked or not?
I am calculating the check digit for a 13 digit number in Excel and I need to be able to do it in Access.
My Excel formula; =1&E1&MOD(-SUM(MID(1&E1&0,{1,3,5,7,9,11,13;2,4,6,8,10,12,14}, 1)*{3;1}),10) -- cell E1 holds the base 12 digit number.
My attempt to convert to Access; =1 & [txtBase] & [-SUM(MID("1" & [txtBase] &0,{1,3,5,7,9,11,13;2,4,6,8,10,12,14},1)*{3;1}) mod 10] -- txtBase holds the base 12 digit number
I have a report that contains hyperlinks to various folders on our share drive at work. I distribute this report once a week using the EmailDatabaseObject built-in function in the macro builder. I specify the output of the report to be PDF format. Everything works great, except when it is converted, the hyperlinks do not work.
You can click on them within the PDF, and a message pops up asking me to "allow" it to connect to the address. (Only the address now contains "%20" scattered throughout the address. Is the link corrupted?).
Is there any type of work around at all?
I have a query that uses DateDiff to give me Minutes of an in and out time.Online I found the following to use in a textbox control source on a report to convert the minutes to Hours:Minutes.
=[Minutes] 60 & Format([Minutes] Mod 60, ":00")
But when I enter this it gives me an error. I am not sure how to fix it. I tried writing it like this with RegHours being the source of that column
=[RegHours]60& Format([RegHours] mod 60, ":00")
but when I go back to report view that text box then says #Type!
I read somewhere that I could right click on a form that I designed and convert it to a report. However, I have yet to figure that out. I don't have that menu option when I right click on it. Is there another way to do this so that I don't have to duplicate effort here?
View 8 Replies View RelatedI have a date field in a form which is not compulsory.
I then pull this date field into a query to create a report.
If the date is not entered then is it possible for "Date not entered" to be written into the report automatically. I have tried playing around with nulls but have had no luck.
I have a tracking database I have been working on and so close of being done just held up on this last part. What I am trying to do is have the totals = Ex. 1.25 + 3.50 would give Grand total of 5.15 not 4.75. The table has a field called time spent which stores the time. I have attached an example database. So whenever the minutes = more then 60 for it to add 1 to the hour.
View 13 Replies View RelatedIn a table called Appointments and the field called Plastics we enter the initials of surgeons.
However in a report i want the initials converted to full text - in the example below the initials are HJC
The expression below doesn't work - it just returns everything in the Plastics column.
Any ideas?
Expr1: IIf(HJC([tblAppointment]![Plastics]),"Heather Cleland")
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
I am trying to set up a report and I need to separate the check box from the label. For example, the label reads CASH and has a check box. I want the label CASH to be the header and the check box to be underneath, but I can't seem to separate the two. How do I slide the check box down to the Detail row and leave the Header in the Page Header row?
CASH
x
x
x
x
x
x
x
I have a report that pulls a date from a query, but they'd like an option where if they don't want to enter the date, they can check one of 2 checkboxes. Check box 1 would return "N/A" and checkbox 2 would return "TBD.I've never had to do anything with more than 1 checkbox.
View 5 Replies View RelatedI am trying to create a P&L statement in access. I know what I want to come out at the end. I am just starting to play with access and having trouble getting what I want to come out of it.
On the sales side I have a query that gathers all the revenue sources and calculates a total for each date. I then use a second query to just take out the data I want for the P&L report. I created a sub-report that displays the data I want. I use the grouping and grand total features to get the total into the report footer. So far so good.
On the expense side I created a form of a query to manage the one to many relationship to capture the data for expenses (one purchase with many line items). I created a query based of this query to get the relevant data for my expense sub-report. I created the sub-report and got everything looking and calculating the way I want it to. I use the same grouping and grand total features to display the data in the report footer. Still good.
I created a new main parent report with the two sub-reports (sales & expenses) on it and even was able to pull the totals from the sub-reports into the main (so currently the subtotals of the two sub-reports are displayed twice). Now when I try to use the textboxes I used to pull the sub-report totals into the main report to perform additional calculations (sales - expenses) I get #error. I have tried different things and gotten ?name.
Control source for the two textbox controls on the main that display correctly, but don't let me do any further calculations.
=[rptP&LExpensesOverview]![AccessTotalsAmount]
=[rptP&LSalesOverview]![AccessTotalsTotal Sales]
To do the subtraction I have tried using the references above, as well as just using the names of the unbound text boxes in the report that bring the totals into the main report.
As a work around, I tried to build one query with all the data from sales and expenses, but can't "filter" based on date and get the data I want in the query results because the two sets of data are not necessarily related. I either get a long list of records, or no records (I am currently only playing with about 5 days of data).
I currently have details of my clients in a table called tblSites, this tble includes a field with an email address. I currently produce a invoice which is automatically saved as a pdf and an email generated with the invoice attached. However, a few clients do not have email addresses (these are sent by post). My code (see below) will successfully produce the email with the attachment, but if the client does NOT have an email address in the tblSites it comes up with the "Invalid use of Null" error. What I want it to do is continue the process of just saving the invoice with a Msgbox stating "This Client does not have an email address etc etc.
'Save Invoice as PDF and annotate Invoice Number, Date and site name
Dim StrFile As String
Dim slSQLString As String
Dim rsEmailAddress As Recordset
Dim slEmailAddress As String
StrFile = "C:Redwatch Invoices" & Forms!frminvoice!txtInvoiceNr.Value _
& "-" & Format(Date, "dd-mmm-yy") & "-" & Forms!frminvoice!cboSiteName & ".pdf"
[Code] ....
how to run a report to show a Client if one or of the following fields are blank or unchecked(Yes/NO?
Fields
Client
Assessment Date(Null)
Placement Fee Paid(Check Box)(No)
TJ Completed(Check Box)(No)
So basically, if one of the above fields are null or unchecked, please show in the report. I'm sure it's easy but to do, but not up on coding.
Other than a check box, is there any way to check if a user has printed a report when they open it to view and give them a reminder on close?
Thanks
DBL
I have a report with an if then statement for a checkbox.
If checkbox is true...etc versus if checkbox is false...etc
When there isn't a record that has this checkbox checked, I get the error
"You entered an expression that has no value." (Runtime error 2427) How can I ignore this error
when the record doesn't apply to the criteria?
I have create a report which contains a check box. What I want to do is to hide the box if it null. I have attached an example database to show what I'm trying to do. I have tried using:
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
If IsNull(Me.[Written Work Seen1]) Then Me.[Written Work Seen1].Visible = False
If IsNull(Me.[Written Work Seen2]) Then Me.[Written Work Seen2].Visible = True
End Sub
in the OnFormat event of the Details section of the report.
The aim of what I am doing is to create a monthly statement to give to our intermediaries that shows the commission they will receive each month for the deals they have referred. I have managed to create this report, HOWEVER I can't figure out how to filter out which month I need, so I a report for Jan, Feb Mar etc... The idea is that at the end of each month I need to run the report so only the latest month shows...
View 3 Replies View RelatedHow do I hide the report footer based on the report's data ?
I'm trying to hide if number of users = 1
The report's data is a query built inside the report's RecordSource, not a self standing query.
I've done this once entirely by accident and can't seem to duplicate it...
I have a report. It has the following:
Report Header: Logo and title
Department Header
Supervisor Header
Group Header
Detail
Department Footer: Totals
Report Footer: Overall Totals for all departments
Here's my question.
I have combo boxes on my main form that filter this report. The combo boxes are referred to by the query that runs the report. How do I get proper unfiltered overall totals in my report footer?
I have a report that displays incidents, their details, consequences and a photo. Among the details is a severity rating high medium or low, I have been asked to make the report shorten the records which have been given a low severity (because it takes up as much space as the more important/severe ones).
The only method I can think of is to use the onformat event, to shrink and make invisible all the fields that I don't want to see if the severity field shows 'low'.
Basically I have a table setup where Time Fields are stored. What I need to do is in a Query, have the difference of two Time Fields calculated, and then displayed on a Report. Here's what I have so far...
Table
- Start Time
- End Time
Query
Difference Time: DateDiff("n",[Start Time],[End Time])
All that works fine and shows up on the report, except for the fact that the time is showed in straight minutes, so for a difference of 1:30 minutes, it just shows 90 minutes. I need to make it so that on the report in the Difference Time Text Box, it's showed as 1:30 instead of 90.
I tried putting the following in the Control Source for the Difference Time Text Box on the report, but it returns an error.
=[Difference Time] 60 & Format([Difference Time] Mod 60, ":00")
I have a report with many columns in the detail listing data, and their associated titles above in the page header.What I would like to accomplish is the ability for the user to check boxes off on a form which will remove/add specific columns to the report. The form will essentially be a "build your report" style, with a button on it opening the print preview of the custom report.
Im assuming this is accomplished by the "on load" part of the form through VBA. How is the sizing handled? If the user un-check's a box to remove a column of data, how is the header and detail data "moved over" or re-arranged to accomplish a relatively decent looking layout? Any example or example code to deal with one column/setup (which I can copy and modified)??