I am trying to use =DCount() on a report and its half way working, it does count records acording to the criteria I asign the problem is its using the whole universe of records in the table so I have a report displaying 10 records of which 953 are Red and 752 are Blue...
View RepliesI've been struggling with getting a report to simply count records (I don't need any detail other than the counts). Here is what I have:
Table CompressorRoundsT contains these fields (many more actually but these are the ones I care about for this purpose):
Date, Shift, Round
Possible records in the shift field are 1st, 2nd, 3rd and the round field has Rnd 1 and Rnd 2.
For each date, I need to count the number of records per shift and per round. For example, the report should show that on June 7th, 1st shift has 14 records for round 1 and 14 records for round 2. Same for 2nd and 3rd shift. I don't need any other details of what the records contain, just the counts.
I've had some success but the layout ends up too spread out because it is including the individual records instead of just showing the counts and it isn't grouping the way I want.
It's a report for management to see how many readings (rounds) were missed in a period of time.
I'm creating a report for an imaginary "medical clinic's database", the intended function of which is described as follows: "Create a statistic that shows the total number of distinct drugs prescribed to a patient."
Where I'm at:
I've created a query called UniqueDrugs containing drug and patient info. The SQL is:
Quote:
SELECT DISTINCT Drugs.Drug_Name, Patients.[Patient _ID]
FROM Patients INNER JOIN (Drugs INNER JOIN Prescriptions ON Drugs.[Drug_ID] = Prescriptions.[Drug_ID]) ON Patients.[Patient _ID] = Prescriptions.[Patient_ID]
GROUP BY Drugs.Drug_Name, Patients.[Patient _ID]
ORDER BY Patients.[Patient _ID];
The results of this query seem to be what I need. All I need is for the count formula that I use to return the number of distinct drug names there are that are related to a patient's ID.
I've created a report and I've put the following formula into a text box:
=DCount("[Drug_Name]","[UniqueDrugs]","[Patient_ID]=[PID]")
Where PID is the name of another text box in the report that contains the Patient ID that I want to compare to the drug names returned by the query.
However, this *always* results in #Error, no matter how I change the formula.I have been led to believe that syntax is not the issue, as the following formula worked as intended for a different task:
=DCount("[Prescription_Date]","[UniqueYearQuery]","[Patient_ID]=[PID]")
How do I use a DCount to return the number of different drugs that have been prescribed to a patient?
If it did not require the number of different drugs, I would simply use the following formula, which works just fine:
=Count(Drug_Name)
I have been trying to create a report to count equipment tested between two dates:
I am using Access 2000 (old I know) and I have 21 different tables with the fields laid out the same. For the moment, I will list five of the tables: Servers, Laptops, Printers, Workstations, and Monitors. The criteria I draw from each table are the fields Model#, Part#, Serial#, Test Date, Retest Date, and Technician.
I can create a report from a query (say laptops). The criteria I is BETWEEN[Enter Start Date]AND[Enter End Date] under the TEST DATE field. Works great! In my report I use =Count(*)&" "&"Unit(s) tested" & "Between "&[Enter Start Date] & " and" & [Enter End Date].
That works great too.
I am trying to create ONE REPORT using ONE Date range and display how many units were tested:
Example:
Units Tested between March 1, 2014 and March 31, 2014
Servers 9
Laptops 23
Workstations 15
Printers 18
Monitors 31
If I can get these five tables, hopefully I can add additional tables to the same report as I need them. I am not savy with VB code, but will give it a go with some direction as to where to put it and how to add to it.
I'm trying to create a table that shows only records assigned to the user based on their environ("username"). I tried creating a code that adds the user name to a table, but this won't work as multiple people will be using the database at once.
View 2 Replies View RelatedI have a report due the first of each week in which I need the cases open and cases closed for the previous week, the week two weeks prior and the 2007 and 2006 year to date on two different types of cases. I have a case management table with a field for Type of Case, date assigned and date closed that I uses in my queries. Presently I have two query, one that generates only Type 1 cases from the Case Management Table and another for Type 2. I then use the Type 1 Query in another query that limits the results for Type 1 cases to those opened last week, one for those open two weeks ago, one for 2006 YTD and one for 2007 YTD. In these 4 queries I have one field [Type of Cases] and I have the query count. I then do this for Type 2 cases and then go through the whole process to do Closed Cases. All my queries have criteria to automatically filter the dates to the time periods mentioned above. I then have one report query that I put all the number in for my report. This query has 16 fields with the numbers for each period, last week open and closed, 2 weeks open and closed, etc. I then generated a report that takes these numbers from my report query and puts it in a report format automatically. As you can imagine this takes some time to go through each query to generate these numbers, so I was wondering how I may do this differently. Also, I have experienced a problem when a field produces no records I get a blank sceen with nothing under the Count of column and get the same thing for my report. How can I fix this.
View 1 Replies View RelatedI am trying to create a report which basically includes the following:
Company, Wages, Contribution.
Each company reports wages for each employee every month. Then they also contribute to a general fund based on a percentage of the wages. For instance:
Company---Employee---Wages---Contribution
CompanyA---EmployeeA---$4000---$40
CompanyA---EmployeeB---$3800---$38
CompanyA---EmployeeC---$3800---$38
CompanyB---EmployeeA---$4200---$42
CompanyB---EmployeeB---$4200---$42
...and so on.
Each employee is required to contribute, in this example, 1% of gross wages to the general fund.
On occasion, the company does not pay in the required 1% of gross, say, for CompanyA EmployeeA, they only paid in $35.
Here is what I need to do. If any contribution amount for any employee is incorrect, I want to display all the records for that company, not just the incorrect ones. The report is grouped by Company, and may contain dozens of companies.
I am already passing a number of criteria to the report using a filter, including the date range and other fields which are informational.
Using MS Access 2000
I'm building a customer management database. Part of which is a table to record details of all members of the main customers family or the household compliment.
I'm currently using a DCount to work out how many people on the table are related to my client, to work out the size of the family.....
=DCount("MemberID","tblHHMembers","CustID = [CustID]")+1
Could I also then count the members of the household that are under 16 years old by looking at the DoB from the same household members table?
I realise that I'd need to ask access to calculate age at the same time as working out if they're under 16 and then count them if they have the same Customer ID - which might need a little more than this single function!
When entering information on the form, there is a combo box with 4 options
Started
In Progress
Verified
Complete
There are several different areas on site here and i'd like to be able to set up a report which will count the amount of the above 4 possibilities for each section. For example i'd like the report to look something like below
Area A
Started 1
In Progress 6
Verified 3
Complete 5
Area B
Started 3
In Progress 9
Verified 21
Complete 11
So i'm displaying the number of jobs in each section and how far along they are at a glance
As part of the report I'd like to have a table that would list all different values in column in column A and the number of times they appear in the table in column B.I have a bit of a hard time how to populate the table the easiest way.I have all the values in a separate source table, so first column is easier. but do i have to write the dcount statement for each row for second column?Could I display results of query as subquery in report.If you have a bunch of textboxes with increasing names like NameBox1... for for/next loops in reports... is there an easy way to assign those names?
View 9 Replies View RelatedI have an activity report which has multiple entries for the same date by club members. I have managed to build the database:
2 Tables
2 Queries
2 Forms
1 Report
Which list attendance's and activities by Member and Date and Prints each one starting on a fresh page..What I wish to do is count each Club Members total days attendance. I have tried using the Totals button but I don't know enough about expressions to get it to count multiple dates as 1.
Everywhere I have looked can tell me how to count between dates, around dates, workdays in a year etc. etc. etc. but none give me multiple dates the same counted as 1.
I have a report that is pulling data from a query and on the report, i have a controlled field that is supposed to count only data where a field says "no". Here is the string.
=Sum(IIf([Caller Used Resources]="No",1,0))
when i run the report i get the four results that say no, but i also get a blank field counting the times when this field is blank. If this field is blank, i don't want it to show anything.
I have a report which is based on a query. The query combines information from TBLDwgReg and TBLDwgRegDtls. The unique field linking these two tables is DrawingNo. The query - QRYDtldDwgReg - is showing 99% of the information I want to see.
My problem is this - one drawing can be revised several times. I have my report grouped by IssuedBy and then grouped by DrawingNo. In the group footer for IssuedBy I want to count the number of drawings issued by a particular consultant. For example...the structural engineer has issued 17 drawings for a particular project but when I do a count it is returning a total 27 because some of those drawings have been revised.
I tried grouping in the query and counting the DrawingNo field there but that's not working either.
I remember reading a tut on how to count records using Running totals in a report - but I cannot remember where I read it. It went something like this.
In the section that you want to count, add a field with record source '=1' and make it a running total for the group.
In the header (one level up from where the running total resides) add a field with record source =Max(RunningTotalField)
Although the 'intellisense' sees my 'RunningTotalField' when I create the above mentioned formula, when I run the report, its asking me to input the value for the 'RunningTotalField'?
Have I confused some concepts or am I on the right track?
I've got a table with 23 columns. Column 1 is the ID row which has a unique client ID in it. Then we've got a column called 1st_Reason and one that goes with it called 1st_Transfer_Date. This pair repeats for 2 through 10. Each of the Reason columns can have a set value, for example "First Processor".
What I need to do is create a date with months on the Y axis and the 5 different reasons on the X axis. I need to count the number of "First Processor" across all 10 Reason columns for each month. I would need to repeat that for each other reason type, but if I can get one to work I can simply change the reason type.
Here's what I'm using to count May's total:
Code:
=Sum(IIf([Current_Reason]="First Processor" And [Current_Processor_Transfer] Between #4/30/2013#
And #6/1/2013#,1,IIf([1st_Reason]="First Processor" And [1st_Transfer_Date] Between #4/30/2013#
And #6/1/2013#,1,0)))+(IIf([2nd_Reason]="First Processor" And [2nd_Transfer_Date] Between #4/30/2013#
And #6/1/2013#,1,IIf([3rd_Reason]="First Processor" And [3rd_Transfer_Date] Between #4/30/2013#
[Code] .....
I get wildly inconsistent results. On one of the types, it's only counting where it's the 1st_Reason. Some of the others return the same value regardless of which month I have selected.
Suppose we have a report that outlines several fields, one field shows the City. In the report, this week, we see 10 records "New York", 8 records "Houston", 7 records "London", 3 records "Paris" and so on.
Next week's report outlines different cities and different number of records. I need to have in the report footer a "recapitulation" , a field that would say :
New York 10
Houston 8
London 7
Paris 3
Total 28
Next week cities and number of records might not be the same, we may have
Tokyo 12
Singapore 14
New York 6
London 7
Can i make my report in that way that it will count the values without using VBA ? I tried the count values option but it counts the overall report, does not take into consideration the different values.
Hi,
I wonder if someone could possibly help me.
I'm working on a database used to dispatch first aiders to events. The general structure is a form detailing the event with a subform (currently pulling info straight from a join table though I may change the data source to a query at a later date) containing details of attendees in list format.
I have a record in the events form that shows the number of first aiders attending which is currently updated manually. In the subform however, there is a tick box as to whether they attended as sometimes they enlist but have to cancel for whatever reason.
I wanted to implement something that will count the ticks and update the number attended field automatically.
I don't know alot about VB and have tried using the count expression function in the subform footer then setting the number attended field to equal the count field. The problem I find with this though is firstly there can sometime be a delay in updating this and secondly I need the number attended to appear in a report listing all the duties attended each month for expense claims.
I may be half way to hitting the mark with what I've tried but if anyone could suggest anything, I'd be very grateful.
Thanks in advance for the help
Ian
Quick overview. I have a site # and Subject #. The subject # is 7 digits and the first 4 are the site # (exp. Site # 1000, Subject # 1000001, 1000002, etc). At times the subjects switch sites but their subject # remains the same so Subject # 1000001 now resides at site # 2000.
How would I write a query like the following?
Count [tbl_Enrollment]![Subject #] WHERE [first 4 digits of the subject #] LIKE [tbl_Site_Dem]![Site #]
I have a student with an access table that has fields names week1, week2 etc. The data in these fields is either a '1' - meaning present or a '0' meaning absent. We want to be able to put a formula in a query that counts how many absences there have been (similar to a =countif formula in excel)
any ideas?
Hello everyone,
Got another problem that I'm sure you guys will solve with your eyes closed ;)
I've got a database with a field called courier_no. Imagine this set of data.
1234
1234
1266
1277
1277
1288
1299
I want to run a query to count the number of instances that each number appears. For example I would expect the results
1234 2
1266 1
1277 2
1288 1
1299 1
I then want to run a criteria on the count field (But I think I'm ok with that bit once I've solved the counting of the data.)
I've tried the count function in the query builder but it doesnt total the instances that each record appears.
Help please (and please keep it simple cos you know I struggle with all that VBA stuff :D)
Stu
hi all...
i'm sure there is a simple soultion to what i want to do but my brain isn't helping me at the moment...
i have a table called bookings with a column called nono which consists of dates with each date being a booking for a bed....
i want to be able to run a report for instance which tells me how many beds have been booked between two dates and year to date...
how do i go about doing this the most efficient way.... i can get a count for one particular date without a problem... and i know i could go and write out totals for each date in the range and then add them up...
however, is there a better more effieicient way of doing this???
cheers in advance.....
I have a table with two fields: Company, Product_Name
Currently the table is not normalized (which is what i am now trying to change). While the Product_Name are unique, the Company names repeat themselves (one company has several products).
I will like to find out which company has more than 10 products and see the names of these companies in a query.
Can I achieve this simply through SQL? If not, How do I accomplish this with VB?
As always, all assistance is highly appreciated. Thank you.
In my form (on which I have removed record selectors) I would like to display the number of total records. Is there some way of inserting this information in a text box or other control?
Thx
I have made a query for each column in my table in order to sort by ascending order. I want to assign this Query to a column heading button on my form. What is the code, or how do I go about assiging this query to this button so every time it is clicked the data is sorted according to what that query says?
View 2 Replies View RelatedHi guys, back on the development trail!!
I have a database, the 3 tables of current interest are:
tblStaticIP (IP)
tblComputerIPAllocation (ID - IP - ComputerID)
tblHardwareIPAllocation (ID - IP - HardwareID)
Realtionship via IP (no RI enforced).
I would like to be able to list all allocated IP's in a single query, even better prevent allocation of IP's allocated elsewhere?
Can anyone advise?
Thanks,
Phil.
I am using a form with command buttons on it to set the criteria in my query to run the report.
Example : cmdQ1 'Command Button
PHP Code:
'1st Quarterly Report.
BeginDate = DateSerial(Year(Date), Int((Month(Date) - 1) / 3) * 3 + 1, 1)
EndDate = DateSerial(Year(Date), Int((Month(Date) - 1) / 3) * 3 + 4, 0)
I managed to get this far but need to continue on with 2,3, and 4th quarters.