I have a field I need to create on my report that needs to be based on what is in another field on my report.
If Note (that's my field name) = 1,2,3,4,5, or 6, I want to sum a field called PlateNumbers.
What is the syntax?
This Works:I have a report with subreports that provide totals to the main report. The main report is grouped to provide the totals by customer. Here is the format:
Customer Labor Materials LineTotal
Cust1 $100 $10 $110
Cust2 $200 $20 $120
Cust3 $300 $30 $130
[Labor] - ControlSource =IIf([rptSchedE_STS_Sum_Installs].[Report].[HasData],[rptSchedE_STS_Sum_Installs].[Report]![TotalExtInstall],0)
This doesn't work:
I am trying to create totals for each field (i.e. LaborTotal = $600, see below)
Customer Labor Materials LineTotal
Cust1 $100 $10 $110
Cust2 $200 $20 $220
Cust3 $300 $30 $330
Totals $600 $60 $660
I've tried the following each resulting in #Error:
ControlSource =Sum(IIf([rptSchedE_STS_Sum_Installs].[Report].[HasData],[rptSchedE_STS_Sum_Installs].[Report]![TotalExtInstall],0))
ControlSource =IIf([rptSchedE_STS_Sum_Installs].[Report].[HasData],Sum([rptSchedE_STS_Sum_Installs].[Report]![TotalExtInstall]),0)
ControlSource =IIf([rptSchedE_STS_Sum_Installs].[Report].[HasData],Sum(Nz([rptSchedE_STS_Sum_Installs].[Report]![TotalExtInstall],0),0)
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are:
VehicleReading
PreviousReading
VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers,
= [VehicleReading]-[PreviousReading]
And also a calculated field named Consumption,
=[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail. I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
However I keep getting error messages and despite troubleshooting and looking on the internet I can't seem to find a solution to this.
I have a report with a number of calculated fields, and information that is pulled from the form that calls the report. Pulling the information is done in the Report_Load() event by setting the report.txtBox = Form.txtBox. When I open the report in acPreview all the calculated fields are populated as they should, and when I open the report in acNormal mode (which is what I want) the calculated fields remain blank.
View 6 Replies View RelatedI have calculated fields on my tables and used zero values as default to show totals. But when I view my report, all the zeros appear. Don't want those zeros to appear on the report.
View 1 Replies View RelatedHi All!
I am trying to create an updateable non-calculated field in a select query. Specifically, I want to create a Yes/No data type called "Fail".
This is a multiple-user application so I can't solve the problem by using append and delete queries to modify records in a table.
This has turned into a much stickier problem than I anticipated. I would appreciate any insight or advice you have.
In my tables i have used calculated fields. one of the fields is to "total expenses." In a report, i need to show the sum of all the "total expenses", the filed populates in the report but the cents are missing. for example if the amount is 6080.40 it shows as 6080. how can i get around this? I have tried changing the decimal point value to 2 at which point the value turns to 6080.00 when it should be 6080.40 (i am a beginner at this i am assuming the answer will probably involve c++ or visual basic's, two concepts i am not familiar with.)
View 2 Replies View RelatedI am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are:
VehicleReading
PreviousReading
VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers,
= [VehicleReading]-[PreviousReading]
and also a calculated field named Consumption,
=[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail.
I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
I know I need to get those zero's to fail in the calculation but as I said before all of the suggested expressions I have tried fail due to syntax!
I have created a report in Access that calculates the dates based on a date-type field in a query. I want to be able to use these calculated dates in another report and sort these dates in an ascending order. With the dates, I also want to display certain information from this report. Is it doable? Please let me know....ASAP if poosible...
Thanks!
I have a production report with 4 one to many sub reports (material reworked, reclassified, rejected, and issued). Each of those sub reports has a sum field totaling up the material reworked, rejected, etc for that lot.
I need a calculated field that subtracts the totals in each sub report from the reported amount produced in the main report.
Should I do this with a calculated field on the report. If so how would I reference the summed fields in the sub reports?
Or should I put a summed field of the amount reworked, rejected, etc in the query the report is based on and make a calculated field off that.?
My employer is using Windows XP Pro and Office 2003 (a few machines have Office 2010, but not mine). Furthermore, the machines are running the Japanese language OS, which has caused some comparability issues with my English XP/Office 2003 at home.
I have a form containing an unbound textbox, with the name MIS. The form's Current event has the following code:
If IsNull([[ResignationDate]) Then
MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))
ElseIf [ResignationDate] > Date Then
MIS = DateDiff("m", [NichiiGakkanStart], Date) + Int(Format(Date, "mmdd") < Format([NichiiGakkanStart], "mmdd"))
[Code] .....
The calculates (correctly) the Months in Service of the employee who's information is being viewed.
Now, I am trying to create a report which lists the employees by work locations. The above , and other calculated information, is to be displayed in the report.
I used the wizard to create the report, using data from two different tables (employee & location).
I need to display the calculated information above for every employee at every location.
Example:
"Work Location"
"Employee Number" "Given Name" "Family Name" "Months in Service"
The report, as it is now, displays all work locations and the above employee info except the calculated data.
I've read up on using calculated fields in tables, and I'd prefer not to take this approach.
I have a database which gathers and stores the odometer readings of our company vehicles every month. I have built a simple report with columns for Vehicle Number, Employee Number, Employee Name, Month, and Odometer Reading. My boss wants a field for each employee which compares the records for the last two months and displays the difference (i.e. the number of kilometers travelled in that month) /
View 2 Replies View RelatedI have a report that has four fields: Item, Qty, Price and TotalPrice for each line in the detail section. Total Price is calculated by multiplying Qty x Price. The text box name that holds the Total Price for each line is txt_TotalPrice. I want to have a Grand Total in the report footer. I placed a text box in the footer with the following expression: =sum([txt_TotalPrice]). When I run the report Access prompts me for the parameter value of txt_TotalPrice. I've been trying to solve this for quite a while now - but I'm totally baffled.
View 3 Replies View RelatedI have a report and I am trying to Round Up the calculated field SumOfAccrual Amount to 2 decimal places. I am attaching a screenshot of my report and output.
View 2 Replies View RelatedI have an invoice system, where the payment due date is the last working day of the month following the invoice.
For example, if I produce an invoice on 5th June, the payment will be due on the last day of July. What I can put in a text box to automatically calculate that date, based on the Order date?
This is the order date formula : =[Forms]![frmInvoiceMain]![txtOrderDate]
I have a report and in the footer I have added a text box (Textbox136) to work out the average percentage of the field [Percentage], which works fine.
For the value in textbox136 I want to output a grade and want to use an IIF function in the control source, something like:
IIf([Textbox136]>=100,"A+",IIf([Textbox136]>=90,"A+",IIf([Textbox136]>=80,"A",IIf([Textbox136]>=70,"B",
IIf([Textbox136]>=60,"C",IIf([Textbox136]>=50,"D",IIf([Textbox136]>=40,"E",IIf([Textbox136]>=30,"E-","U"))))))))
But it won't work.
Basically i have a form where i get info from multiple tables. On the main form itself i have 3 calculated fields for hours where i add all the hours i choose (from a subform) onto the main form.
My issue is i can create a query to come up with all the fields for my report, but how do i get the calculated fields on my main form on the report? Is there a way to print the calculated fields on the main form to a report? or do i have to do the same calculations on the report itself?
I have a form which works good enough. In this form, there is a text box that counts and calculates records from a subform. The name of this text box is "text1" ...
Can I fetch this "text1" field in a report ?
I'm creating a report to check for over- or under-stocked items. The report is working fine, gets all the records etc. except that it thinks that the OnHand field from my inventory query is text or something, at any rate not a number. I have successfully set the format of the field in the query to General Number, but that doesn't seem to have worked. Here's the SQL for the report:
Code:
SELECT DISTINCT Signs.SignCode, Signs.SignDescr, Size2.XYdim, qryOnHand.OnHand, Bins.Rack, Bins.Level, Bins.BinNum
FROM (Size2 INNER JOIN (Signs INNER JOIN (Items INNER JOIN qryOnHand ON Items.[ItemsID] = qryOnHand.[ItemsID]) ON Signs.[SignID] = Items.[SignID]) ON Size2.[SizeID] = Items.[SizeID]) INNER JOIN (Bins INNER JOIN InventoryDetail ON Bins.[BinID] = InventoryDetail.[BinID]) ON Items.[ItemsID] = InventoryDetail.[ItemsID]
WHERE (((qryOnHand.OnHand)<=[Check for signs with fewer than:]));
I have a Report that has calculated fields in the details section. I want to total those fields in the Report Footer. When I run the report I am prompted to enter the value for the calculated fields and the Totals do not appear. Access must be inspecting the report before it actually runs. And so, since the calculated fields do not exist until the report is run then Access doesnt find them during the inspection and hence prompts for input.
View 2 Replies View RelatedI have created a simple booking DB, i am try to summarize the booking by centre and date so that when a user checks if there is availability the will be able to see how many have booked an activity and how many spaces are left, i have created a new field that calculates the spare places
Spaces: IIf([Totalbookings]=[MaxPeople]"Full"[MaxPeople]-[TotalBookings])
I have also added a link to the main file - [URL] .....
I am quite new to access 2007 but trying to create an IIF statement in a report but don't know where to start.
My report has lots of 'Label' fields with standard text based on a query for the fields components. I want one of my labels to only appear on the report for print IF a record field called 'Program' (which is from a list) has the word 'RHICHOP' at the beginning of it. If RHICHOP is not in the beginning of the Program then leave out the label text.
I have a table, it is fairly large but pretty simple.
It lists store numbers in the first column. Each column that follows is a SKU, and in the field it either has a 1 or a 0 to represent 1 if it is stocked in the store, and 0 if it is not.
Can I write a report that will show what each store has, and how do I do that? I basically want it to return the sku number (and its description) if it has a one in the box, but not if it doesn't.
I'm working on a project where I'm supposed to take an excel spreadsheet and replace it's function with Access. So far I have created the form, table, and query, now I just need the report which (according to my boss) needs to mimic the existing spreadsheet.
I know this is probably not going to be fun, but hopefully somewhere out there can give me a few pointers?
Attached is an example of what the spreadsheet looks like (Capture1) and what I currently have in my report (Capture 2).
Im creating a database that we can enter jobs into.A job will consist of 3 seperate parts, Called "Trusses", "Walls", "Posis". They will each have a different delivery date and possibly a delivery time.
I am having trouble creating a report that gives me a week view, Monday to Friday, that shows what deliveries are on each day.The main thing here is there is one job entry, with the 3 parts. So there will need to be 3 seperate entries on the report for each part of that job.
I am using Access 2007. creating a report that show only one record from my query or table.
View 5 Replies View Related