Reports :: Criteria Doesn't Work In Chart Report

Oct 27, 2013

I have a query that has a field that reads DateReceived By Month: Format$([Workorders].[DateReceived],'mmmm yyyy') The criteria line is Like "*" & [Enter Month & Year (Leave Blank for all)] & "*" And this works when I run the query. If I enter october 2013 it shows only records for this date range like it should.

Then I built a bar chart report that will show the workorders only for the month entered. The problem is, If I leave this field in my query the chart does not update . When I open the chart it will prompt for the month and year but the data in the bar chart doesnt change. If I remove this field the chart updates as expected.

If I go into design view for the report and then right click on the chart and go to properties , then to row source, it reads as this:

TRANSFORM Sum([Workorders Query2].MyTime) AS SumOfMyTime SELECT [Workorders Query2].SerialNumber FROM [Workorders Query2] GROUP BY [Workorders Query2].SerialNumber PIVOT [Workorders Query2].[MXDPrinter];

If I click on the elipstical to go into query tools for this line , and click on run I get the error : The microsoft Access database engine does not recognize '[Enter Month & Year (Leave Blank for All)]' as a valid field name or expression.

So my criteria runs normally in the query and returns the correct records, but I can't get it to work in the chart .

View Replies


ADVERTISEMENT

Modules & VBA :: Passing Parameters To Report Doesn't Work

Feb 23, 2015

I have a query that sums up the number of parts used. This works fine.

I want to be able to limit this query to parts used after a specific date.

I have in my report

DoCmd.OpenReport "Part Totals Report", acViewPreview, , "[Part Date])>= " & SQLDate

The report is bound to a query that has 2 group by fields, 1 count field a a further field, a date field ([Part Date], that I put a default criteria on. This field is not displayed. If I don't put a criteria on this field disappears when I close and open again.

I pass a date to the program via a form and this ultimately ends up in SQLDate. When I run this I get promted to enter [Part Date] even though I'm setting it equal to SQLDate above. I can out garbage to a proper date in here either way the report picks up the default date entered in by the query.

1. Get rid of all of the parameters off the query.

2. Then you can use the Where Clause of the DoCmd.OpenReport code to specify the parameters based on your variables.

1.Not sure what this means but when I get rid of the criteria for the parameter the field disappears (I'm setting the show field to no as I don't want totals group by date). Getting rid of the field gives me all parts used.

2.I think I'm doing this in the above but will bow to superior knowledge!!

or is it I can't pass a parameter to a report run by a query that is grouping fields together to produce a count.

Incidentally once the report has been run (albeit with the wrong parameters) and I go into design mode and look at the property sheet for the report the correct filter is there (i.e., the date that has been input) but it quite clearly ignores this.

View 1 Replies View Related

Reports :: Pie Chart On Report

Oct 8, 2014

I have a query written that has two numbers. One is the trucking fleet size (63) and the other is the average number of trucks used over a time period (in this example, its 52.2)..I just want to create a pie chart that has 52.2/63. so the pie would be roughly 90% filled.

View 2 Replies View Related

Reports :: Sub-report Chart With No Data

Aug 27, 2014

I am working on a project that is requiring me to hide a subreport that happens to be chart graph, when the chart has no data and my problem is that I cannot seem to get the report to properly hide and show the label behind it when the data is not there. I am in need of a SQL code that will read my blank record source as a zero instead of blank. I have tried Nz, IsEmpty, and IsNull and none of them seem to work.Here is the current SQL code:

SELECT DISTINCTROW Sum(Case_review.ID) AS SumOfID
FROM Case_review
WHERE (((Case_review.[Type of Issue].Value)="Clinical"));

Here is the current VBA code (which is in event on load) for the main report:

If Me.Rpt_Clinical.Report.HasData = -1 Then
Me.Label29.Visible = False
Me.Rpt_Clinical.Visible = True
Else
Me.Label29.Visible = True
Me.Rpt_Clinical.Visible = False

View 7 Replies View Related

Reports :: Linking Report To Subreport Chart

Jun 25, 2014

linking a report and a subreport (chart). I have uploaded my sample DB. I'm trying to chart all the individuals and three fields for each Home. Both report and subreport are using the same query for the record source. My charts are blank "All_Homes_Individual_Totals". Just use date range 05/01/14, 06/24/14 on my Main form page for the data.

My second question is how would you create a chart to pull by each individual with their monthly totals per Home using "qry_Community_ Inclusion_ All_Homes" with a report and subreport (chart) as above. Report would show the individual's totals by month for each home.

View 1 Replies View Related

Reports :: How To Create A Chart In Access Report

Mar 11, 2013

How can I create a chart to be added to the last page of an access report to summarize all the data reported?

View 1 Replies View Related

Reports :: Adding A Chart That Represents Information On Report

Apr 2, 2013

I have a popup form that prompts for a value and has a button defined with an OnClick,OpenReport with a WHERE clause. The value the user enters is placed in the WHERE clause.

The report is generated using a Query and the WHERE clause.
I was very surprised -- it works!

Now I'd like to add a chart to the report that represents the information on the report. How can I do this without calling the query again? Can I somehow reference the information that's in the report?

View 1 Replies View Related

Reports :: Chart Not Appearing On Report In Print Preview

Aug 21, 2014

I am having an issue with viewing a report. I have a button set up to show the print preview of the report. There is a chart based on the report's record source, and two sub-reports showing related data. The print preview section however shows the the chart area where it would appear is blank, i.e. there is a white area where the chart should go. There is no error message. The two sub-reports appear correctly. If I go to print the report, however, the chart appears, and it will also appear if I change the view type (e.g. to layout and back again).

View 7 Replies View Related

Reports :: Control Form Pivot Chart In A Report?

Dec 2, 2014

I have a bar pivot chart made in a form this load fine, I have the below VBA code in place to control the bar color depending on what the bar show.

Set frms = Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0)
Dim i As Long
With frms
For i = 0 To Forms![OtherCases created by Indv by Month chart].Form.ChartSpace.Charts(0).SeriesCollection.Count - 1
With .SeriesCollection(i).Name
Select Case Forms![OtherCases created by Indv by Month

[code].....

When I then open the Report this is not working at all each bar just get a random color regardless what the bar show.how to convert the above to fit a Pivot chart form a form that is displayed on a report.

View 1 Replies View Related

Reports :: Printing Filtered Pivot Chart On A Report

May 23, 2013

I have created a database that tracks production by individuals. I have also created a report which includes a pivot chart to give the user a chart view of production.

In the pivot filter of the chart I have associate names, where the user can click all, or individual associates, to see individual production.

The trouble I am having is when the user goes to print the chart, it will only print the chart with the "All" filter view. Even if the pivot chart is filtered to one associate, it will print like "All" was checked.

Is there a way to allow the report/pivot chart to only print the production for the individual who is checked within the pivot filter?

View 4 Replies View Related

Reports :: Chart Report Printing Additional Pages?

Oct 1, 2014

I've got a report, which on the screen is three chrts and a page break in between. Page is set up to print landscape.

When I print the report or save to pdf it adds a lot of pages in between 2 and 3. It seems to be of chart no.2 getting smaller and smaller. I've attached a copy of the pdf so you can see what I mean.

its doing this on all my reports.

View 7 Replies View Related

Reports :: Creating Chart In Report Using Unbound Text Boxes?

Jul 25, 2013

I am having trouble creating a chart within a report. Let me start off by explaing my report.

I have many unbound textboxes on my report that all have the code very similar to this:

" =Count(IIf([Complaints Table]![Month]=1,IIf([Complaints Table]![Decision - Our Favour? (Y/N)]="Y",0))) "

This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.

What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .

View 1 Replies View Related

Reports :: Access Report Chart Across Multiple Group Levels

Jan 22, 2015

I know how to create a chart in an access report, put it in the group header or footer and link it such that the the grouping filters the chart.

My VP wants me to create a chart that compares each invididual providers episiotomy rate (something that is done to pregnant women during delivery) to the overall divisional rate on a monthly basis.

I know how to do this with 2 charts, ie 2 different group levels. One chart goes in the date grouping level (the overall rate) and another goes in the provider grouping level (the individual provide rate).

is there a way to have this in one graph in an access report?

View 5 Replies View Related

Reports :: Make A Report That Shows DONE And REMAIN In Each AREA With Pie Chart

Oct 10, 2013

I have a table that shows "DONE" and "REMAIN" for each "AREA" like below:

Code:

AREADONEREMAIN TOTAL
AREA1100200300
AREA2200300500
AREA3200700900

Now I like to make a report that shows "DONE" and "REMAIN" in each AREA with pie chart, now I have problem how I have to do this job for the graph, how should be "row source" of chart control. What query needs on this table?

View 1 Replies View Related

Reports :: Select 4th Slice Of Pie Chart In Access 2003 Report

Nov 4, 2013

I've got a simple dataset that will ALWAYS have 4 rows, against which I have assigned the colours Green, Amber, Red, Grey. So I made a simple pie-chart to go on the report, but I can't work out how to assign the same colours.

Please see 3 attachments showing the current layout, the preferred layout (which I mocked up in Excel) and the chart settings screen.

The chart is working OK i.e. 4 slices appear and they are the right size, but when I open the chart, I see only East, West, North. So I am unable to manually set the colour for the 4th slice.

View 10 Replies View Related

Reports :: Microsoft Chart Object In Report - Formatting Line Weights

May 5, 2015

Using a Microsoft Chart Object 6.0 in an Access 2010 report. It's easy enough to do the basics and that chart responds to data.In my case, I have 12 lines, or columns, being controlled by data. It responds to the data. just fine. What I want to do is control the line weight and colour of each line through VBA.

You can click on the chart itself on the report form, but formatting the line you actually want is almost impossible. Pretending we can, you get the pop-up configuration windows and the TAB "PATTERNS". Under that, you can select "LINE" and then choose the style, color and weight. This is what I need to do in VBA.

Lines like this do not work:Graph_Data.Columns("A").Line.Weight = 5
or...
objDataSheet.Columns("A").Line.Weight = 5I tried a variety of versions of that and am pulling my hair out.

View 8 Replies View Related

Reports :: Combination Of Grouping And Sorting In Report Does Not Work

May 15, 2013

Access 2010. I have a table with the following fields:

- From
- To
- TypeOfWork (to be chosen from a combo-box)
- Activity (text field to be filled in freely)

In a table i have a complete day with times (from -> to), the type of work between those times and the activity performed between those times a bit like this:

FROM TO TYPE OF WORK ACTIVITY
00:00 - 11:00 Welding Welding clamps
11:00 - 13:00 Welding Welding anodes
13:00 - 15:00 Cleaning Cleaning pipes
15:00 - 18:00 Cleaning Cleaning floor

I would like it to show in the report like this:

FROM.....TO.......TYPE OF WORK.....ACTIVITY
00:00 - 13:00......Welding............00:00 Welding clamps
...............................................11: 00 Welding anodes
13:00 - 18:00......Cleaning...........13:00 Cleaning pipes
...............................................15: 00 Cleaning floor

So it should sort on "From", then group by "TypeofWork" and repeat the "From" field(I think...). But I now have tried every combination of sorting and grouping I could think of and nothing works!

View 13 Replies View Related

Why Doesn't This Work ?

Oct 5, 2006

i am trying to run an append query in SQL which appends a calculated value into another table 50 times incrementing the day by one day each time. When I run it it asks me for the parameter [NewDay] each time. It is obviuosly not picking up the variable.

Can anyone tell me why ?



Dim NewDate As Date
Dim n As Integer


For n = 0 To 50

NewDate = Date + n

DoCmd.RunSQL "INSERT INTO InventoryEvolution ( SAP, Stock, [Date] ) SELECT UK_Product_Estimate_Live.[RE SAP Code], ((Sum([Estimate01])+Sum([Estimate02]))/50)*-1 AS Stock, NewDate From UK_Product_Estimate_Live GROUP BY UK_Product_Estimate_Live.[RE SAP Code] HAVING (((UK_Product_Estimate_Live.[RE SAP Code])=513450))"

Next n

View 6 Replies View Related

Why It Doesn't Work?HELP!!

Sep 14, 2005

Hi all,
I get this error "You tried to execute a query that does not include the specified expression 'SITENAME' as part of an aggregate function."


The query is:

SELECT o1.name AS SITENAME, o1.vertical_loc/10000000 AS LAT, o1.horizontal_loc/10000000 AS LON, c.CELLGLID AS CELLID, 'traffic_total' AS Expr1, sum((MEBUSTCH_HR+MEBUSTCH_FR)*period_duration)/sum(period_duration) AS Traffic, 'traffic_hr' AS Expr2, sum(MEBUSTCH_HR*period_duration)/sum(period_duration) AS Traffic_HR
FROM objects AS o1, objects AS o2, c_bts AS c, p_generic_cell AS p
WHERE c.int_id = o2.int_id and
o2.parent_int_id = o1.int_id and
p.bts_int_id = o2.int_id
GROUP BY SITENAME, LAT, LON, CELLID, Expr1, Expr2;

I know the problem is with the group by clause. In MySQL it just works using "group by p.bts_int_id. I learnt in access i have to include all non-aggregated fields in the group by clause, and that's what I've done!! WHY!!Please help me!!!

View 3 Replies View Related

Why Doesn't Like Work

Mar 14, 2007

Hallo,

The following what I do not understand:


Set cmd = New ADODB.Command
Set cmd.ActiveConnection = CurrentProject.Connection
cmd.CommandType = adCmdText

cmd.CommandText = "SELECT par1 FROM tblparameters Where tblparameters.gcnf = 'XMLexp' AND ((tblparameters.ccnf) Like 'ExpTijd*')"
Set rec = cmd.Execute()

Do While rec.EOF = False
MsgBox rec("par1").Value
rec.MoveNext
Loop


I don't get any result back. If I changed it likt the following:
tblparameters.ccnf = 'ExpTijd1' , in the query, I get one record back.
So my conclusion the query is right but the Like doesn't work in these circumstances?

thanks in advance.

Nico

View 3 Replies View Related

Why Doesn't This Work?

Apr 14, 2005

hi folks,
I am designing an application for an assignment for college, all seems to be going ok except that I have to teach myself access from a book. When I update a record on a form and go to another page it works fine, but if I attempt the same action ( for example creating an appointment then moving to a new form to confirm they have arrived) a second time I am getting an error which tells me I can't save the record. I think it is to do with updating the recordset when the new form is opened. I have an update record button on the form (created by the wizard) but it wont update on the second attempt. Could someone please tell me the code to update a recordset on the formload procedure. Ive tried me.recordset.refresh and me.recordset.requery but I still can't solve the error. Please help I've got to hand this assignment in in 2 weeks. thanks in advance
Chris

View 4 Replies View Related

Why Doesn't This Work Anymore.

Jun 7, 2007

I'm trying to run an update query to trim a field to the first 8 characters.

I've used this in the past, but now it wont work. I'm stumped.

Left(Trim([IMIE_MSISDN_IMSI]![IMEI]),8)

Now when I try the records remain unchanged, i.e. 13 characters.

Any ideas?

View 2 Replies View Related

Copied MDW Doesn't Work

Jun 14, 2007

Hi! I'm relatively new to Access (2003) . I had to modify a shared network app so I copied it off and renamed it, made my mods and everything is fine. I then went to another app that connects to the original app to obtain data for display and synchronization, modified the call to open the new app including the new mdw. When it hits the new mdw, it can't open it because it says it's being used exclusively or the workgroup file is missing. It's not being used exclusively and it doesn't appear to be missing. The network path is correct. If I use the mdw from the original source app, it works fine. Please advise! :(

View 1 Replies View Related

My Database Doesn't Work Like Before?

Aug 22, 2007

Hello everbody,

I'm sorry if my thread is in wrong section, cause I'm first time on this great forum :(! I hope you'll undrestand me ;)

My problem is with my database for my coffee bar, man who made database is still, and I don't have somebody to repair my database unfourtanetly :(

I formatted my C:, cause I installed new OS Windows XP PR SP2, and everything is deleted, but I save this .mdb file, but I don't have instalation CD for this program, cause man who installed me this database didn't give me instalation file :(!

And I saved this .mdb file, and now I try to run this POS.mdb,I can open "POS KASA" in english POS CASH, and I see articles - (ARTIKLI), and value of them it account values of them, just program doesn't count for me like before "sume" or "total" of EX. one count, for example coca cola 2.5 KM, fanta 2.5 KM = 5 KM, and now he doesn't count sume - total in program total is "UKUPNO", if somebody to know to repair this, or something another what is importing to work this database like before, please help me, database is on bosnian, if you need translating just ask me, cause I don't know to edit this file, and to have access to change words :(!

1'st colone in program interface (bosnian - english)

Sifarnici -something like codes

Artikli = Articles
Ulazi = Inputs
Storno racuna = storno count
Pregled storno racuna = review storno count

2-nd colone in program interface

Dokumenti - Documents

POS kasa = POS cash register
Dnevni promet = daily exchange
Trenutni saldo kase = current saldo of cash register


3-rd colone in program interface
Reports

Printanje prometa po broju = Printing exchange by number
Printanje prometa od datuma do datuma = Printing exchange from date to date
Printanje trenutnog prometa = Printing current exchange

IZLAZ = EXIT :)


Actually for me the most important is POS CASH REGISTER, cause it doesn't count total value of one count , total = ukupno doesn't work, sume doesn't work, and I can't give on my guests count, and I have problem with inspection cause I don't have counts :(, please help me and if you can repair this; IN ADVANCE TNX MUCH!

Greetings to all, from Sarajevo, Bosnia and Herzegowina!

I'm sorry really on my bad english, and I hope you'll understand me :(!

View 1 Replies View Related

Queries :: IIF With Sum Doesn't Work

Jan 9, 2014

I need to do the price in table [price] multiply by 1.20 if the price is higher then 150. If the price is between 75 and 150 it have to multiply by 1.25. Continue... continue... continue...

expr1: IIF([Price]>"150",[Price]*1.20,IIF([Price]>75,"[Price]*1.25",IIF([Price]>50,"[Price]*1.28",IIF([Price]>30,"[Price]*1.35",IIF([Price]>15,"[Price]*1.45",IIF([Price]>0,"[Price]*1.6"))))))

View 3 Replies View Related

Bypass Startup Doesn't Work!

Jul 28, 2005

If I hold down the SHIFT-key and click on my access database the database boots up with the startup options! I can't get into my database even if I hold down the SHIFT key!! Help me, please

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved