Reports :: DLookup For Text From ID Field?
Mar 27, 2013
I have a report based on a parameter query. One of the parameters is TM Name. This parameter value is selected from a list box. The table on which the query is based also has TM Name as a look-up from a list. So ofcourse the ID is showing in the TM Name field on the report...not the actual name.
I am attempting to use a Dlookup to show the actual name than I will hide the field with the ID. Here's what I have as the control source:
=DLookUp("Name","TM_Names","[TM]=" & [Reports]![Report_TM_Records]![TM])
It is pulling in the value of the first row in the "Name" column of the "TM_Names" table. Doesn't seem to be looking at the value in the TM field on the reports.
My gut feeling is the report needs to be "saved" or "refreshed". I have tried a few macros to do this but I get errors.
View Replies
ADVERTISEMENT
Apr 15, 2014
I'm trying to pull a date from a table into a text box on a form tab control using DLookup and I just can't figure out what is wrong with my DLookup expression:
=DLookUp("DateOrdered","tDateOrdered","PrNumber=" & [PrNumber]) ----- (DateOrdered is short date, PrNumber is text, db is split Access 2013)
Whats missing in this expression? I've tried every criteria variant I could find but to no avail.
View 9 Replies
View Related
Jun 13, 2013
I am trying to create a form with multiple combo boxes where users can select fields from my main database and click a button to generate a report based on their selections. I think I am supposed to create a generic report with perhaps 4 fields where I would link the four combo boxes to. The issue is I cant seem to get the selection of the combo box to change the field that the report should pull from the database. I think I am supposed to use dlookup in the reports control source for each field, but I cant seem to get it to work.
View 14 Replies
View Related
Oct 20, 2014
I have a textbox on a report that I wish to populate based on the value that is in another textbox/field on the report, and I thought DLookup was the way to go - however, I cannot seem to get it to work.
I have a table (ComplaintsResponses) that has two fields, both text
[ShortDescription]
[ResponseText]
The text from [ShortDescription] is saved in a field on another table that contains all the other relevant information that is used in the report, and whilst this short description is mostly fine, I have one report where I need the data from the larger [ResponseText] field.
I have tried the following code:
Code:
=DLookUp("[ResponseText]","[ComplaintsResponses]","[ShortDescription='" & [Reports]![PublicComplaintsArea]![txtSAPCRMResponse] & "'")
and
Code:
=DLookUp("[ResponseText]","[ComplaintsResponses]","[ShortDescription='" & [SAPCRMResponse] & "'")
Both of which return a #Error in the text box.
The field that contains the text that is used for the lookup is SAPCRMResponse, and the textbox on the report itself is called txtSAPCRMResponse.
View 2 Replies
View Related
Jun 4, 2013
I have a single field in a table called "Client Contact", where users enter a semicolon between the name, address, and city state & zip. My reason for this was so we could copy client info with a single copy and paste (like from an email). But, on the final report, it needs to have these three parts split up into different lines, or even different textboxes. I can't find a way to do that.
View 1 Replies
View Related
May 10, 2013
I am having trouble creating a specifically formatted report.
Anyway, I have two fields: [Title] (plain text) and [Description] (memo). I want to combine the two but have the Title bold underlined but not the Description. I want it to look like this:
This is the Title. And this is the decription part that could go on for many, many more lines...
I have tried combining the two fields like: =[Title] & [Description] but if I set the properly to underline, then the whole thing is underlined.
Since the Title will vary in length, I cannot just underline the Title and then put the Description field next to it.
View 6 Replies
View Related
Mar 20, 2013
I have a form with attached subform from which I can choose which records to send to a report. All records in the base table have a comment text field for the user to enter additional data (comments). Typically, there are none, but when there is, if it is only a single record sent to the report, the comment is printed in the page footer. However, if there are multiple records being sent to the report and only one record has text in the comment field, unless it's the last record it the subform, it will not print in the report. There isn't enough room in the detail section to include the comment field (like I said, it's typically not used and when it is, they can be lengthy). Is there a way to get the comment field to print in the report page footer when it is not either the only record selected, or the last record?
View 4 Replies
View Related
Dec 9, 2013
I have one field in my table "Id". Here I have inputed 16 digit number always. Can I print out every digit with different text box or label in my report?
View 4 Replies
View Related
Aug 13, 2013
I have a problem when I try to combine in a text box a text and value from field in a table.
I would like to have a text like this:
Ref nr: 1
"Ref nr" would be a text in a report
"1" would be the nr of the ID of the client.
I tried:
="Ref nr " & [ID]
It simply does not work. No clue where I go wrong.
View 1 Replies
View Related
Jun 19, 2013
Using Access 2007.
I have a table "StoreInfo" that stores the store number, store address, etc as text fields. I then have created a query gathering this data, specifically store number and address as separate fields. When I run the query, the store number and address are correct. When I use that same query in a report, I have one specific store where all data appears on the report correctly except the store number. The store number is "007" but appears on the report as "137". I was able to correct the problem by changing the store number to eliminate the leading 0's.
Since the field is a text field, I just assumed I would not have any sort of problem with the leading 0's. Once I changed the store number to 107, the problem disappeared.
View 3 Replies
View Related
Jun 26, 2015
I have a report which when I open it by clicking the button in the form shows what looks like Chinese text in the memo field. To open the report the following is in the event properties for the referencing button
Code:
Private Sub cmdPrintSumReg_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
[Code] ...
When I open the same report from the reports menu on the left of the database it is just fine. But obviously it is showing information for all contracts and not the any one contract.
I haven't changed anything in the table that contains the memo field and this only started happening yesterday afternoon after using this db for over a year.
I found an earlier post in this forum with a similar problem but the only difference I see is that the user changed the field from a text to a memo. I haven't.
View 5 Replies
View Related
Oct 21, 2014
I'm creating a report to check for over- or under-stocked items. The report is working fine, gets all the records etc. except that it thinks that the OnHand field from my inventory query is text or something, at any rate not a number. I have successfully set the format of the field in the query to General Number, but that doesn't seem to have worked. Here's the SQL for the report:
Code:
SELECT DISTINCT Signs.SignCode, Signs.SignDescr, Size2.XYdim, qryOnHand.OnHand, Bins.Rack, Bins.Level, Bins.BinNum
FROM (Size2 INNER JOIN (Signs INNER JOIN (Items INNER JOIN qryOnHand ON Items.[ItemsID] = qryOnHand.[ItemsID]) ON Signs.[SignID] = Items.[SignID]) ON Size2.[SizeID] = Items.[SizeID]) INNER JOIN (Bins INNER JOIN InventoryDetail ON Bins.[BinID] = InventoryDetail.[BinID]) ON Items.[ItemsID] = InventoryDetail.[ItemsID]
WHERE (((qryOnHand.OnHand)<=[Check for signs with fewer than:]));
View 14 Replies
View Related
Dec 3, 2014
I am generating a report that needs to have a hyperlink in part of one of the fields. Prior to saving the field to the database I do a bit of VBA coding on it and add some HTML. The result is this in the field:
"There are two ways to book with your preferred rate: <br>
1. <b><a href="http://hamptoninn.hilton.com/en/hp/reservations/index.jhtml?hotel=ABGVA&corporateCode=12345">Click Here</a></b>! <br>
2. Call us directly or at 1-800-Hampton and use your Corporate ID 12345."
It works beautifully if you paste it into a web page but in the Access report, Access applies the Bold but just ignores the hyperlink.
This is Access 2013 with MS SQL Server 2008 backend. Everything I have read suggests that this should work and is supported. Is there some trick I'm missing?
View 2 Replies
View Related
Jan 22, 2015
I have only one bound text field in my report. By default, it shows the results (150 records ) vertically. I wish to show them horizontally, 5 in a row. How to do this.
View 11 Replies
View Related
Oct 8, 2014
I have a report which I would like to change the text of a field blue if a certain condition is met. What I want to happen on this report is if a specific field has an "Active" - then it will be in Blue text, otherwise it is in black text.
I have gone into the report ->in the Details section -> put a procedure in the On Format event. The code I have been trying is:
-----
If Analysis_Status = Active Then
Me.Analysis_Status.ForeColor = vbBlue
Else
Me.Analysis_Status.ForeColor = vbBlack
End If
End Sub
----
View 6 Replies
View Related
Aug 3, 2015
I have a report based on a query. I want to populate 6 Text Boxes with Dates from fields in another query. The date fields I want to add will be headings for columns that represent weeks (they change all the time so can�t be hard figures). The two queries are not really related by any common field. I am not able to get this working because the fields I want are not part of the query that is the Record Source for the Report.
Is there any way that I can do this? Can I change the record source of just the text boxes?
View 5 Replies
View Related
Mar 11, 2013
I created a form letter as an Access 2007 report. I want the greeting to read, "Dear [first_name]," e.g., "Dear Alan,". The [first_name] field is bound to said field in a query. When I just use the [first_name] field, I get "Dear Alan" with no comma. I've tried to add the comma various ways:
"=Trim[first_name] & ",", "=[first_name] & ,", "=Trim([first_name] & ","), etc., etc.
Any addition to the basic field produces the "#Type!" error. I also created labels from the same query using
"=Trim([first_name] & " " & [last_name])",
and that works fine.
View 4 Replies
View Related
Oct 20, 2014
I would like to append a text item to each value in a calculated field. consider the field name is "Division" and I want to append the word "Division" to the values put out by the field "Division"
My attempt was: Division & " " & "Division". This produced an error in the report.
View 4 Replies
View Related
Mar 14, 2013
I have an Access 2010 database with a memo field formatted for Rich Text.
I created a simple form. It accepts and shows paragraphs, i.e. I press Return and a new paragraph appears (with a blank line in between paragraphs).
I then created a report based on the same fields. In the memo field it shows the text entered in the form, but not the paragraph breaks. It just shows one big block of text without any paragraph breaks. I have looked for a field property in the report design and layout views that might affect how the text is displayed in the report but I cannot find one.
It is not much use if you can input paragraph breaks in a form but not see them in a report.
View 2 Replies
View Related
Apr 11, 2013
creating a DLookup expression for an unbound control on a report. This report displays data collected from the users from a table called tblaudit completed. This table contains (among others) three fields labeled below
Brand
Form
Area Changed
I also have another reference table labeled refevalareas. The fields in this table are as follows
BrandName
FormName
AreaName
PointValue
I would like to create an unbound control on my report that "prints" the point value depending on the Brand, Form, and Area displayed for each record. Though the field names are different the data collected and displayed in each table is consistent. I haven't worked much with Lookups and the logic is challenging for me to grasp but I think I have the basic idea which is shown below..
DLookup( refevalareas.[PointValue], refevalareas, ("[BrandName] = '" & Reports!rptqryauditcompleted![Brand] = "'") & ("[FormName] = '" & Reports!rptqryauditcompleted![Form] = "'") & ("[AreaName] = '" & Reports!rptqryauditcompleted![Area] = "'")
View 4 Replies
View Related
Mar 11, 2015
I have a database which I have been using for over a year now which includes a Dlookup formula in a report.The dlookup references the query QRYDwgCount and looks up the number of drawings issued by a particular architect. I have been using the following formula which was previously working
="Total drawing count for " & [IssuedBy] & " = " & DLookUp("CountOfDrawingNo","QRYDwgCount","IssuedBy = '" & [IssuedBy] & "'").
The problem I have now encountered is a new job with an architect that worked on another job already in the database. Instead of bringing forward the number of drawings issued by the architect for this current job, the formula is showing the number of drawings issued for the earlier job. I therefore need to add "ContractName" = [ContractName] but I am getting either Error or an incorrect answer as the result.This is what I have written:
="Total drawing count for " & [IssuedBy] & " = " & DLookUp("CountOfDrawingNo","QRYDwgCount","IssuedBy = '" & [IssuedBy] & "'" And "ContractName='" & [ContractName] & "'")
View 7 Replies
View Related
Jul 3, 2014
I need to add a DLookup to my Subreport.
For my text box, Text255, on the Subreport I have tried:
Code:
Private Sub Report_Load()
Me.Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
The table Performance_Requirements_Defaults_Table has just one record for lookup. No value is returned when I run the main report.
I found this: [URL] .....
And tried adding the lookup code to the main report instead of the Subreport, but I think I am having trouble understanding what they mean here: "Subform1 is the name of the subform CONTROL on mainform" Are they inferring that I need to have a text box on the mainform as well?
I tried using this Me!Subform1.Form!ControlName like this:
Code:
Me.Text255.QC_Along_Line_Processing_Subreport!Text255 = DLookup("[Along_line_spacing_%pass]", "Performance_Requirements_Defaults_Table")
I know this is not correct, and I have tried several variations, but I am totally stumped. Everything I have tried with the lookup code in the main report returns "Member Not Found" and Text255 is highlighted. I feel like this should not be such a big problem.
View 1 Replies
View Related
Jan 5, 2015
I have a table named z_ResltsSampleCountMonthly. In that table I have fields SampleSize, Month and LOB.
I have a report that I need to use a Dlookup in order to pull the SampleSize by LOB into my report. However, my report has three columns that change based on the start and end dates for the report. It shows current month plus the two prior months to show a trend.
So I have each column heading update automatically based on the dates the user enters into the start and end date on the main menu form.
If they select 12/1/14 to 12/31/14 the three columns heading would update to October 2014, November 2014, and December 2014. In the table I have the data for all three months so when I use this formula it works but it's putting September 2014 data under October 2014 so I need to have multiple criteria; one being the LOB and the other being the column heading which is equal to the field Month in the table.
Code:
=DLookUp("[SampleSize]","z_ResultsSampleCountMonthly","[LOB] = ""CMES""")
This is what I tried to do to add the second criteria to pull based on text59 being equal to the Month field in the table but it's not working:
Code:
=DLookUp("[SampleSize]","z_ResultsSampleCountMonthly","[LOB] ="CMES" And [Month] = ' " & [Text59] & " ' ")
View 2 Replies
View Related
Jan 7, 2014
I have been all over the internet and trying different things for hours to no solution. I have created a form (Code) which I am using to auto fill two categories in a form using dlookup. Both categories fill perfectly but I cannot get the information to transfer to a query in order to capture the information in a report.
These are the dlookups I've been using and the categories I'm attempting to capture are "Description" and "Category"
=DLookUp("Description","[Code]","[CodeID]='" & [ViolationCombo] & "'")
=DLookUp("Description","[Code]","[CodeID]='" & [ViolationCombo] & "'")
View 3 Replies
View Related
Dec 17, 2014
Ok, so I have this table (tblPayPeriod) with the fields Start Date, Stop Date, Pay Period & Percent FY. The Percent FY field is a Number field that gives off the percent of the fiscal year (FY) that we are in.
Then I have a report (rptDistrictMgr) that in the header I want it to display what percent of the fiscal year we are in based on the Auto_Date that is in the header.
So, if the Auto_Date is December 17, 2014, we are (according to tblPayPeriod) 24.1% into the fiscal year and I want the 24.1% to display in the text box which called Text99.
I would just like a simple dlookup that I can use as the control source of the text box or an expression to put into the On Load sequence.
View 6 Replies
View Related
Apr 2, 2013
Im trying to make an invoice,
Im trying to autofill the products name using a dlookup
The ProductID1(2,3,4 OR 5) is selected from a list in a form and is sourced from "Products!ProductID"
=DLookUp ("Products!PName","Products", where "ProductID1" = "Products!ProductID")
How do i make this work,
Without the "critera" the lookup returns only the 1st record of "Products!PName" for every transaction even though the ProductID1 differs
How to i get it to show the correct corresponding name to ProductID1??
Ive attached a screenshot....
View 3 Replies
View Related
