Reports :: DSUM With Multiple Values?
Jan 10, 2014
I am trying to do DSUM as a control in the footer of a report which would sum up values in one field [Charge_Qty] only if certain criteria are met for another field [CPT_HCPCS_Code]. The problem is that I cannot use the proper syntax for the multiple criteria but am successful if I only have one value in the criteria. ok this works below but I need to use multiple values such as 93303 - 93321, 93662, 93350-93352
=DSum("[Charge_Qty]","DIVISIONQueryDATEYEARTEMPLATE","[DIVISIONQueryDATEYEARTEMPLATE]![CPT_HCPCS_Code] = '93303'")
View Replies
ADVERTISEMENT
Sep 30, 2014
I'm trying to filter from dsum criteria the two values, here is my code :
Code: =DSum("Amount","qry_sumawpo","[Status] = 'FBLNG'" OR "[Status] = 'BLLD'")
How to correct this code. I need 2 different values in 1 criteria.
View 2 Replies
View Related
Dec 16, 2013
I want to replace some values in a TNS_QUERY with DSUM. The error message tells me I have to use an updateable table.
How can I avoid to create a query and replace the values directly in the original table TNS? I just group on the original table.
Code:
Public Sub TNS_QUERY()
Dim strSQL As String
Dim x As Double
Dim qdf As QueryDef
strSQL = "SELECT TNS.[Division],TNS.[Customer_Split],SUM([TOTAL_NET_SALES])
[Code] ....
View 2 Replies
View Related
Mar 14, 2014
I have to join multiple values into a string for summarizing data on reports and exports. This process in vba is taking up to 10 minutes to process and will get worse as the size of these reports grow.
My method so far is to query the individual items into a recordset, loop through the values, adding them to the string then return the string in the query.
Here is an example:
Public Function SO_Description(intSO As Integer) As String
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim strSQLSelect As String
SO_Description = "Profiles: "
Set db = CurrentDb
[Code] ....
View 1 Replies
View Related
Apr 21, 2006
Hi!
I have two related tables, one containing human resource information, the other containing a weekly record of hours worked by employees.
Here's the dilemma:
I need to keep a running total of hours available based on hours worked.
Employees begin each 7 day work week with 70 hours of time available. Any hours worked in that week are subtracted from the available hours for that employee. If there are two days in a row not worked during any given week, the 70 hours needs to automatically reset.
These hours are tracked in the Hours Available field (a calculated control which needs the Dsum expression) which should examine the Hours Worked field. Presently, the Hours Worked control gives a total of all hours worked for the employee shown on screen, but I need to examine the current work week to see whether or not an employee has worked more than 70 hours (it's a legal requirement.) If during any 7 day period counting backwards from the present date the employee had two consecutive days off, the employee becomes eligible to work 70 hours and the countdown starts again. In short, the total hours worked should be subtracted from 70 until 0 is achieved in any given week, unless the employee has had two days off (Hours Worked sum for two consecutive days =0.) I have attached a paired down version of the database for review.
Any ideas?
Tom
View 1 Replies
View Related
May 11, 2015
I've been struggling with the following expression:
=DSum("[FieldName]","TableName","[FieldName]>=" & [Forms]![FormName]![textbox01]& " and " &[FieldName]<= " & [Forms]![FormName]![textbox02] & "")
I keep getting invalid syntax (Access 2007). I tried adding the # symbols but no success.
I also need to put an additional criteria for a Integer field in the same expression where the value is True.
View 5 Replies
View Related
Apr 30, 2014
I have a dsum statement with multiple criteria that I cant get to work. Basically it returns no records, when it should return records that have a CategoryID = 1 and a State/Province = 14.
Code:
TotalSMECount = Nz(DSum("WorkingDays", "qryTotalUsageForDashboardNew", "CategoryID = 1" And "State/Province = " & Me.cboProvinceFilter.Column(2) & "")) + Nz(DSum("UsageDays", "qryEquipmentDaysRapidProtoCumulative", "CategoryID = 1"))
I am guessing that I just have the criteria portion written incorrectly Is there anything obviously wrong? For the record, when I debug.print Me.cbo Province Filter.Column(2) it returns the value '14', which is correct for my test data.
View 3 Replies
View Related
May 15, 2014
I can't seem to get my head around an issue i'm having with a DSum, the statement is:
Code:
=DSum("[Amount Used]","[tbl_Rwk_Used]","[Cage Number]='" & [IBC_Number] & "'" And "[ID]=" & [ID])
I've tested both statements separately and they work ok, but as soon as I add the "AND" operator, the whole field is summed and the criteria thrown out of the window apparently.
[ID] Is the same in both tables and relates to a main record
[Cage Number] and [IBC_Number] are related in both tables, but are and are strings
View 2 Replies
View Related
Mar 23, 2013
I am trying to get deposit amount for the current month but results are in accurate i am using this
DSum("[Amount]","[income]"," [trans_type] = 'deposit'" AND "Month([dep_date]) =" & Month(Now()) AND " Year([dep_date]) =" & year(Now()))
View 3 Replies
View Related
Aug 6, 2014
I have a report in which a textbox generates numerical values and letter values. I want to...On report load - if textbox = numbers then hide otherwise show if it contains letter values.
View 9 Replies
View Related
Nov 13, 2013
I am trying to get calculated fields in my report to work but zero values in the data are throwing up #Div/0! and #Error! and #Num!
The main data fields I am trying to work with are:
VehicleReading
PreviousReading
VehicleLitres
My aim is to track mileage and consumption for a fleet of vehicles and show daily and weekly averages in mileage and consumption and then to flag 20% increase in consumption.
I have a calculated field in my report named Kilometers,
= [VehicleReading]-[PreviousReading]
and also a calculated field named Consumption,
=[Kilometers]/[VehicleLitres]
My sum and average calculation fields in the group footers are only working where there are values above zero in the Kilometer and VehicleLitres and Consumption fields.
In reality there are some days where there has been no travel, so some records will have a zero for the Kilometers field and there are also days when there has been no refueling so there is a zero for the VehicleLitres field.
I have tried using the expression builder to create an IIf function but to no avail.
I have tried copying the syntax suggested by the Expression builder:
«Expr» IIf («expr». «truepart». «falsepart»)
I know I need to get those zero's to fail in the calculation but as I said before all of the suggested expressions I have tried fail due to syntax!
View 11 Replies
View Related
Oct 2, 2013
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
View 5 Replies
View Related
Nov 23, 2013
I have a form that the user can add Work Order numbers to a text box and pass them to a listbox to collect 1 or more values. Each of which need a separate report with the labour hours for each Work Order.
I am having issues figuring out how to get it to pass them to a query or filter the reports.
I have tried many different examples and nothing seems to work.
View 4 Replies
View Related
Nov 4, 2013
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
stDocName = "rptFinal"
DoCmd.OpenReport stDocName, acViewReport
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date]
and also,
[Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load()
Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#"
Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#"
End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.
View 2 Replies
View Related
Apr 26, 2015
I have created a report which contains within it multiple sub-reports, which I use to generate a document for management meetings on a bi-weekly basis.
For each of these I have the subreports filtered to a unique number for consideration that period e.g. LIKE "88/00039" which relates to my data.
In order to change this I have to manually update each of the filter commands within the subreports but I assume there must be an easier 'catch-all' method of achieving this?
Ideally I'd be looking for a command prompt so I could enter just the number sequence e.g. "88/00040" and then enter this (via a corresponding macro or similar) to update the filter commands.
View 2 Replies
View Related
Mar 30, 2014
I have four forms named [Information Form], [Evidence Form], [Subject Form], and [Vehicle Form]. The Final Form is a Tabbed Form named [New Incident]. The tabbed form has four tabs, with each tab displaying one of the forms above. I also have a Print Command Button named [Print All] underneath the tabbed portion of the [New Incident] form.
Also, All of the four forms are set to data entry - yes, so that on open they will be clean and read for new record entry. I need the [Print All] button to do, just that, print everything that has or has not just been entered into the four forms, even if some are printed blank because they were not necessary for this particular report. One thin of note is that each form on the tab has a field for the "Incident Number" which will be the same for all four forms.
View 12 Replies
View Related
Nov 18, 2013
I am trying to add to a db I inherited. One of the end reports that is produced is a cost breakdown for each end user.As things stand, the data collates into individual reports which are then grouped into one file and saved via PDF. What I am trying to work out is whether or not I can selectively pick some of those reports to have more than one copy.
I see a form (within an existing form) that will list all of the end users for a particular scheme and, next to that, be a dropdown that will allow the db user to select how many copies of each report needs to be published. These will then collate merrily into one document to be saved to PDF.
View 8 Replies
View Related
May 2, 2014
I have a queries that do all the calculations and dumps the output to Query X for all different types of customers. At the moment I am required to generate a report for each of the customers and send it to them, manually.
End Goal:Initiate a Macro (at a given time at a given frequency) that would run a process to generate different reports for all different types of customers using a standard report template. I am also trying to avoid having to create a report for each customer (as the customer base grows, the report count will grow) so looking at something that would look into Query X and generate # of reports depending on number of customers.
View 6 Replies
View Related
Jan 5, 2015
Every month, I create 15 individual reports with each report filtered by two fields, let's say Dept and Exec. You change Dept and Exec via a combo box drop down based on a table, and this information is passed to the query behind the report. Now, I repeat this process for every report. I use an unbound form that gathers the "Title", which is the Dept Name +"Special Report"; report Date using "as of" [DATE], and an updated through [Second Date].
Each monthly set of reports is sent to a new directory and folder (i.e. M:MOR Reports2005January. This changes each month. Somehow, I'd like to automate this where each report prints with its name to a newly created folder in pdf format.
I have been reading prior posts and am coming up with some ideas like adding a "selected" field to the Dept/Exec table and then step through those selected records to determine which report you are running. It takes a long time to print these to pdf in a new directory every month.
View 11 Replies
View Related
Oct 25, 2013
I wanted to print multiple reports using for loop but I am not sure how to start with.
This is basically my idea:
1. Create a hidden indicator, I name it txtHidden.
2. I have one table, there are one column for "report name".
3. I have one query, filtered the "report name" column according to txtHidden, criteria written in the design view.
4. Using For loop, browse through all the existing report.
5. Every loop, txtHidden will equals to every reportItem.Name. Query will run.
6. If Query is no result, dont open report, if query returns some result, open the report.
I wanted to code something as below, but I dont know what to put in the [Dont know what to type] field...
For Each [Dont know what to type] In Access.Reports
[Forms]![frmStartup]![txtHidden] =[ Dont know what to type] .Name
If DCount("*", "ReportQuery", "") > 0 Then
DoCmd.OpenReport [Forms]![frmStartup]![txtHidden], acViewPreview
End If
Next
Can ignore the query part. It is working fine.
View 4 Replies
View Related
Apr 23, 2014
I have a form that produces Year end accounts, therefore each page is totally different from one another, there are 10 reports per set of accounts.
I have created 10 buttons that out puts the desired report
Profit and Lost, Balance Sheet etc.....
What I would like now is a way to print all 10 reports with the click of a button, how can this be done...
View 7 Replies
View Related
Sep 2, 2013
Using one form with multiple combo boxes on the basis of which am trying to generate a report. Below is the code I've put in a command button (in Form) by which I want to generate a report....FYI - both combo boxes have text value...
DoCmd.OpenReport "MatrixBy_Member", acViewPreview, , ("full_name = '" & Me.Combo5 & "'") And ("frequency_description = '" & Me.Combo7 & "'")
View 3 Replies
View Related
Oct 18, 2014
how to print mutiple "invoice-records"..I want to print multiple times the same report but with different values ex. invoices (based on a query). I have the report and the queries ready but how can I automate this task?
View 2 Replies
View Related
Jul 10, 2013
I am trying to select a few values for my report, can this be done in the report design view or do I have to make a query and take from that?
I am using access 02!
EDIT: I want to leave out all the values that are 0!
View 2 Replies
View Related
Sep 24, 2004
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
View 2 Replies
View Related
Jun 15, 2005
Hi Guys,
I`ve searched the forums, but not knowing the terminology, i cant find what I`m looking for.
I have a table which is use for a drop down list in my forms.
This is saved into a table, but shows up as a numerical instead of the name value.
Also In reports, I get a numerical value, instead of the text value.
Is there something I`m over looking ?
Or am I doing something totally wrong.
My relationships are correct. and the field data is right, I just cant over come the number issue.
Thanks in advance.
View 6 Replies
View Related
