Reports :: Date Range From Query Not Matching
Jun 19, 2013
When I run my query that has a MINDATE and MAXDATE column, i can see the full range of call dates. The earliest date is 06/04/2013 and the latest date is 06/19/2013.
When I run a report with text fields of MINDATE and MAXDATE off that query the range shows as 06/04/2013 to 06/04/2013...
What I am trying to accomplish is for the report to express the range of dates. the report asks the user to enter a beginning date and an ending date for their search and I want them to know the actual range. The data appears to be accurate but the dates don't work.
View Replies
ADVERTISEMENT
Jun 4, 2015
I have two tables. One is about 160 thousand records, which is a part number, a contract price and a day the price took effect. The items appear several times. Prices go up and down over the course of the data, and items are added and dropped.The second table is a list of dated sales and quotes of those items over the past 14 months.(About 10 thousand lines)
I need to match the items with the contract price that existed on the day the quote or the sale was created, so as to demonstrate we were always at or below the contract price.
View 1 Replies
View Related
Apr 18, 2013
I have a report, based on a query, where the field name is "Date of Work". The criteria in this query field is >=[Start Date] And <=[End Date], which works fine. However I need to have the start and end dates to show in the resulting report header based on the query.
View 1 Replies
View Related
Nov 4, 2013
I am trying to pass a date range parameter & an additional parameter (Type of Audit) to 6 subreports based off individual crosstab queries and housed on one Unbound Report ("rptFinal").I have an Unbound Form "frmDate" passing a date range and Type of Audit using [Start Date] and [End Date] to rptFinal with a button that simply opens the rptFinal as follows:
stDocName = "rptFinal"
DoCmd.OpenReport stDocName, acViewReport
In each Crosstab query, I have set the parameter criteria (in both the Parameter section & the query itself) to:
[Forms]![FrmDate]![Start Date] And [Forms]![FrmDate]![End Date]
and also,
[Forms]![FrmDate]![Enter Type of Audit]
On each subreports On Load Event, I have added:
Private Sub Report_Load()
Me.Filter = "[DteAuditDate] BETWEEN #" & Forms!frmDate![Start Date] & "# AND #" & Forms!frmDate![End Date] & "#"
Me.Filter = "[Type of Audit] = #" & Forms!frmDate![Enter Type of Audit] & "#"
End Sub
and I've set the Filter On Load property to: Yes..I can open frmDate, fill in the date and Type of Audit, launch the report and it runs with no error, I have 6 blank subreports in report Preview. The headers are showing up but none of the data.
View 2 Replies
View Related
Nov 2, 2004
I have a report called rpt_date_range it is based off of the query qry_date_range.
qry_date_range has "Between [Start Date] And [End Date]" in the criteria for the date field.
In the report header, I have the title "All records from [Start Date] to [End Date]"
What I want to do is to take what is entered into the [Start Date] and [End Date] and put that into the title in the report header. At the moment, I don't know how.
Thanks in advance
View 2 Replies
View Related
Apr 3, 2014
I have a set of records that contain the following attributes;R_Name, Cost, StartDate, EndDateI need to subtotal the cost for each R_Name by year. The start and end date attributes can span several years and I need the correct cost for partial years.
View 5 Replies
View Related
May 19, 2006
Hello All,
I am trying automate some report printing.
I have around 20 reports most of which require a from date and a two date.
If I use the code below, it asks for the from a two date on each report print, but the dates are always the same.
Is there a way of take a two date and a from date at the start of the sequence and insert it into each reports date range prompts?
Private Sub btnME_Click()
MsgBox "Please note, this process can take upto 5 minutes to complete."
DoCmd.SetWarnings False
DoCmd.OpenQuery "qry1"
DoCmd.OpenReport "rpt1", acNormal
DoCmd.OpenReport "rpt2", acNormal
DoCmd.SetWarnings True
MsgBox "Reports have been printed, aggregated results have been inputed into 'workstats_automated.xls'"
End Sub
View 14 Replies
View Related
May 27, 2015
The data the query pulls is employee name, course ID, course name and course completed date. I have added criteria in the query that asks for the Course ID to filter on a given course and a dynamic field in the query AnnualReqDate: DateAdd("d",+365,[TrainingCourseCompleted]). What this returns is a list of employees that have completed course X the date they completed and the date (12 months) when the course is due. This works great, have created a report that reflects this very well.
The issue comes in when I try to add the ability to filter by date range on the AnnualReqDate dynamic field. the AnnualReqDate dynamic field does not exist until the query is run the Between [Start Date] And [End Date] criteria add to the AnnualReqDate dynamic field wont work.The query fires off but returns zero records.
View 14 Replies
View Related
Oct 27, 2013
I would like to create a excel file to let the user to input the following column.
Date No. of success No. of failure
==== ============ ==============
" " "
" " "
" " "
I would like to have a function that can allow the user to select the date range and its total no. of success and no. of failure. For example , the user select from 31-03-2001 to 31-12-2012 , then output the report which show the total no. of success and no. of failure in this date range , is there existing tamplate that I can use ? if no , what is the simplier way to do it ?
If the data is very large , I want to create a access db to store it, how to do it ?
View 4 Replies
View Related
Sep 18, 2014
I have a report based on a query that returns all info from the query which is fine, I now need to amend this so that individual users can specify the date range to be queried and the person for whom the results are required (one of the query strings)...
View 1 Replies
View Related
Aug 19, 2015
I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.
I have tried
Code:
Between [StartDate:] And [EndDate:]
And
Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"
Neither of which work ....
View 13 Replies
View Related
Jan 29, 2015
What I have is a single table that I need to create a report from. It has vehicle unit numbers, dates of service, repair details and costs. I am trying to generate a report where I can select a unit from a combobox and enter a date range.
View 1 Replies
View Related
Oct 2, 2013
I have been an MS Excel man all along my career and I am a novice in MS Access.I have created a table, [Initial Customer Approval] which records data from a Form, [Initial Customer Approval]. Once the data is entered in the Form, I need to do some calculations based on the data entered in some of the fields in the form.I created 6 different queries for the six possible values in those fields. now for each of those queries I created respective reports.I placed a Print command button in the Form.
1. When I press the Print button it should open the report for the current record in the Form. (Currently It Opens all the reports simulatneously, with only one relevant report containing the current record; other opened reports being blank.)
2. If user presses the Print button before pressing Save button then system should prompt user.
Here is the code (Please note [reference number] is the unique ID generated for each record entered in the tabe through form):
Private bSaveClicked As Boolean
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Not bSaveClicked Then
MsgBox "You are trying to navigate away from the active record. Please either save your changes, or press ESC to cancel your changes.", vbOKOnly + vbInformation
Cancel = True
[code]...
View 5 Replies
View Related
Aug 25, 2005
I am trying to extract records within a certain date range.
My structure is as follows:
Query 1 = pulls data direct from a table. There is a date field which is in the format YYYYMMDD.
Query 2 = pulls data from Query 1 and amends the date format to:
dd/mm/yyyy
Has anyone any suggestions on how I pull data from query 2 from within a certain date range. i.e 01/01/2005 to 01/05/2005
Thanks
View 4 Replies
View Related
Jun 8, 2005
I have a query which requires date parameters, which the user enters into a form. The form enters the parameters into 4 different queries then runs them to produce a report.
This all works fine EXCEPT for one query.
If I enter my desired date range into the query (in this case it is between 01/11/2004 and 30/04/2005) it returns no results. As the only values in the date fields of the table are 01/03/2005 and 01/04/2005 it should return all the records.
However if I enter the date range between 01/01/2005 and 30/04/2005 it works fine. It also works if I enter 01/01/2000 and 31/05/2005 - it just doesn't seem to like the year 2004!!!
The problem occurs whether I enter the parameters from the form or simply type them into the criteria of the query. Any ideas, it's driving me nuts!!
View 4 Replies
View Related
Feb 8, 2007
Hello all
I was wondering if anybody could help me out with a query problem I've been having.
I've been trying to use a query to display a list of available cars for a given start and end date entered by the users. I have found some guidance to make an attempt but it isn't working. The text in the Input boxes isn't what I'd like. Also the query is displaying all the cars in my database even when I deliberately trying to exclude some.
I'd really appreciate any help As this is my first database and Im really struggling with the use of criteria.
I've included a screen grab including my formulas
http://img.photobucket.com/albums/v242/b3rnie/access_screen.jpg
Apologies if I've missed this advice in my searching
View 3 Replies
View Related
Jun 19, 2007
I am trying to design a report that uses a range of dates as column headers. The row headers are vehicles and the intersection between the columns and rows will display details about that day's vehicle usage.
To do this I need a query that will produce a row of date headers based on parameters from a form. Also, the report needs to display date headers even for days on which no events occur.
Any ideas?
See also:
http://www.access-programmers.co.uk/forums/showthread.php?t=130335
View 1 Replies
View Related
Nov 24, 2004
hello
I've set up a query which contains among others the following fields
ProjectID
WorkstreamID
MonHoursDate
MonHours
MonHoursDate and Monhours come from another query where the date is a calculated value.
If I now run the query, it works and lists the hours done for that project.
If I enter the following expression in the criteria for MonHoursDate
Between [Start] And [End]
and then run the query and enter start and end dates, I get nothing.
Any ideas what I'm doing wrong? The date formats are set to Medium Date and follow the following fomat DD/MM/YYYY
Thanks
sunil
View 6 Replies
View Related
Dec 21, 2004
Hello all, I would like to ask for some help. I am trying to make a select Query that will give information based upon a date range the user enters. I know how to make it so the info shows up for a particular date, but for some reason cannot figure out how to make it so it works for a date range. Can someone please help. Thanks
View 1 Replies
View Related
Dec 26, 2006
I am working on a database of investments. I have a purchase date and a matured date. I would like to create a query where I enter a month and any investment that is active will show. For example if I have an investment that is purchased 1/1 and matures 2/28 and I query February it would show. If the query is for March it wouldn't show. I can't seem to find the answer for this so any help would be appreciated!
View 4 Replies
View Related
Feb 18, 2014
I am trying to create a query where the user can enter a date range and receive a list of records filtered by that date range. The column header is "Date" and the criteria field I have as: Between [Enter Start Date] and [Enter End Date].
This normally works when the user enters 1/1/14 and 1/31/14 as start and end dates for example. however, the table I am linked to with an ODBC connection lists the dates in the following format: 12/26/2013 6:15:11 PM and it will only return records if I enter the full date like 1/1/14 12:00:00 AM and 1/31/14 11:59:00 PM. This is cumbersome for the user and if you type just 1/1/14 and 1/31/14 no records are returned.
Is there any way around typing the full long date? I do not know VB, I only know how to use query design.
View 1 Replies
View Related
Aug 1, 2005
Below is the expression I have in a query. I have a Combo Box on a form that will show all my query's so the one need at the time can be selected. My question is: is there anyway when I select this query to run from the Combo Box on the form that I can input the date range on the fly? The date range will change periodically and I would like to somehow input the date range when running the query from the Combo Box.
FORMS: DCount("[Date_of_Change]","all_trucks_table","[FORM #]=True AND [Date_of_Change] Between #06/30/05# and #07/31/05#")
Thanks for all help!
View 5 Replies
View Related
Oct 31, 2005
My question involves the table below
AutoNumber(primary key)
SerialNumber
Station
Defect Type
Date
Basically now I need to be able to get the result i've gotten by a date range, but the crosstab query won't let me do it the way you can in a regular select query...help..
------------------Station 1 ----------Station 2------------Station 3---------------Station4
RxFailure ------------52-----------------52
Bit Error Rate 10 -----0------------------15
View 10 Replies
View Related
Feb 2, 2007
I am creating a database for a workplace for staff management.
i want a query where the user can input a month or a date range and be able to view all of the staff on holiday during this period.
I originally had a working query however it ignored staff that were on holiday during this period for example searched 11/2006
showed holidays in november but not staff who are on holiday from before and still on holiday during this time.
At this moment in time the fields i have included for beginning the query is BookingID, StaffID, EventName,StartDate,EndDate
any help would be appreciated
View 1 Replies
View Related
Apr 18, 2007
Hi.
I want to set up a simple query criteria where it searches based upon a column called Date.
So I want a criteria that says when you run the query ...
Between which date range? And which date?
Now I know I need to use Between and And within the Citeria, however I would be grateful for someone to show me the exact wording for the criteria.
Thanks and kind regards.
Phil Drury.
View 2 Replies
View Related
May 11, 2007
Hi all, Please help me correct this criteria for a filter in my query.
I want to show all records between todays date and the past 14 days.
I've tried,
Between Date() and "Date - 14"
And it dont work. Thanks for any reply.
View 1 Replies
View Related
