I have a report where I have added a package type to my Query (STD or XL).I have currently included this in the report although I dont need to show it, however I do need to show at the bottom of my report how many rows are Type "STD" and How many are Type "XL"
View RepliesI am trying to build a report that shows the total count for multiple queries.
For instance I have a field in my table that can be either A, B, or C.
I have 3 queries built, 1 to show me the information for A's, 1 for B's, and 1 for C's.
I would like a report that shows me ONLY the total number of each category. such as:
A= 38
B= 72
C=12
Thus far I have only been able to create one that shows me all of the information from the queries.
I have a table tblBookings.
In this table it has a bookingID, CustomerID and some other none relevant details.
The CustomerID comes from table tblCustomer. i.e a customerID must exist in the customer table to be allowed in the bookings table tblBookings
A customer can exist in tblCustomer without existing in the booking table.
I am trying to write a query that will list each and every customer ID in the tblCustomer and count the number of bookings that that customer has (even if it is zero).
I have a query that will count the bookings if they exist in the booking table and display the number of times that a customer appears in the bookings table.
SELECT tblBookings.CustomerID, Count(tblBookings.CustomerID) AS NoOfBookings
FROM tblBookings
GROUP BY tblBookings.CustomerID;
How do I create a query that will do this but list all customers even if they don't exist in the bookings table (but obviously occur in the customers table)
I am trying to create a similar query where all bookings per hotel are listed even if no bookings are made for that hotel. I am guessing the answer is the same as above.
The Ritz. Bookings 0
The Hilton. Bookings 3
The Carlton. Bookings 0
The Lowry. Bookings 2
For every hotel.
That kind of thing.
If you need more information please shout.
I'm extremely new to access and have been given the task to create and send a report for the number of rejects at the end of the day. I'm trying to set up a query to do this but it isn't working quite as I want it to.
I have Q1-C that is set to count the number of rejects at stations. However when I run this query, it counts total rejects by type (all records) and not by date. For example, on 12/3/12 there are 2 rejects (1 - Epoxy on screen and 1 - electrolyte leaks) but the query counts 17 electrolyte leaks and 1 epoxy on screen for 12/3/12.
Next I would like to build a report that would display the type of rejects of the last day for both 'Rejects at Stations' and 'Screen Rejects'. So the report "Productions Rejects"should show rejects on 12/3/12 for Q1-C and 12/4/12 for Q1-O. However, the report now shows all the dates of rejects.
I have attached the database I'm working on.
Hi,
I'm trying to create a count on a tick box of products that have been reviewed, however, the SQL statment I am using (as I have for a couple of other counts will not work fo this dues to 'Data type mismatch' which I can only presume is due to the fact that is is a tick box....
SELECT COUNT (TechnicalServicestbl.RequestID) AS TotalAwaitingReview
FROM TechnicalServicestbl
WHERE (TechnicalServicestbl.[Current Status] = "Completed") AND ((TechnicalServicestbl.[Review]) = "No" )
I have used the same template for a different count of completed jobs of the day, which works fine so far as I can tell.
SELECT COUNT (TechnicalServicestbl.RequestID) AS CompletedJobsToday
FROM TechnicalServicestbl
WHERE (TechnicalServicestbl.[Current Status] = "Completed") AND (TechnicalServicestbl.[Date Complete]=Format(Now(), "mm/dd/yyyy"));
I have a table that contains many records of events. I've already created a multiple item form based on the table. My form contains 2 textboxes for input of a date range and a dropdown box to select "yes or no".
What I am having difficulty with is the query that will count the records by type insert it into the recordsource such that the multiple item form will appear like this:
Event Type| Count
Input | 4
Output | 2
Update | 3
How do I go about doing so? I have been testing with this simple query:
Code:
Private Sub Command8_Click()
Dim Task As String
Task = "SELECT EventType, Count(EventType) FROM Final GROUP BY EventType;"
Me.RecordSource = Task
End Sub
But the column that contains the count keeps appearing as #name?
I have been tasked with creating a database to log employee suggestions and then automatically present reports around the site. I have developed the database and it works OK and can output *.PDF reports, but I'm having problems with how to display these reports. My idea was to output the reports automatically as *.TIFF or *.JPG files and have them stored in a folder that the My Pictures screensaver uses. The reports (in fact, any site report stored in this folder) can then be shown on any screen dotted around the site when it goes into screensaver mode. However I can't find any way to output/convert to a picture file.
The other option is to create a webpage that rotates through the saved PDFs, but this isn't ideal as the PC users will have to load the webpage to display the reports.
I am trying to produce statistics reports in my database. The user selects the information they require in a form (date from, date to etc). A query then produces the results listing each job in turn which is what I want however at the end I would like to produce sub-totals for each client.
Depending on the criteria selected by the user, only some clients will appear in the list. Ideally I would like the footer to show something like:
Client 1 - 4 jobs
Client 2 - 1 job
Client 5 - 6 jobs
Client 6 - 17 jobs
I have tried using the field:
Code:
=Count([ClientDetailsName])
However this only gives the total number of jobs.
Is it possible to have a count of all records matching a certain criteria displayed on the form?
I have to schedule customers for certain dates but never know how many have been scheduled by date while in the form. I am not sure how to reference the field from the table to be counted. I have several unbound boxes with:
=date()&" "&{XXXX}([SCHEDULE DATE]=date()
=date()+1&" "&{XXXX}([SCHEDULE DATE]=date()+1
=date()+2&" "&{XXXX}([SCHEDULE DATE]=date()+2
etc.
not sure what to use for {XXXX}
As always, any help is appreciated.....
Someday I will contribute some answers instead of questions.....
A newbie question I'm sure. I'm looking to display the count of records captured in my recordset. I'd appreciated any assistance thanks.
<code>
<% rs.Open "SELECT Count(tblRequest.LastName) AS UserCount FROM tblRequest GROUP BY tblRequest.HR_checkbox HAVING ((tblRequest.HR_checkbox)=Yes));", adoconn %>
<%
if UserCount<>"" then
Response.Write(rs.UserCount) end if
rs.close %>
</code>
PS. The database is Access 2K
I have a form that contains a number of tabs, each tab then contains a subform. The basic gist is that there are clients and each client chart needs to be audited to make sure that the every clients chart has all of the correct information in it. So if for example, each client needs an initial treatment plan, there would be a tab called Initial Treatment Plan that would contain a subform (continuous form) displaying all of the clients that are missing this information.
I would like to display the number of records that are being displayed in each subform in the tab next to the name to make it easier for the auditor to know how many which tabs have content to be updated. For example, if there are 10 clients that are missing their initial treatment plan, the tab would read "Initial Treatment Plan (10)".
I was able to get a total number of rows in datasheet view, but I don't know if there is a way to have that field as a hidden field in continuous form view that can have its value displayed in the tab.
I have loads of projects in a table, they all have a status (eg Red, Green, Amber).
I have a query for each so if you run qry_RagRed, it will show in a sheet all Red projects and obviously have a total in there.
So I have a form which has buttons on it for navigation, what I want is to display various things on there so for example, a field that simply has the number of red projects, or green etc.
All I want it to do is tell me a number based upon number of items in a query.
I am trying to run query on a months worth of dates, have it count based on each day and then display the date and the number?
Table:
field1 - field2 - field 3 - Date
I can run a query one day at a time but would like to run it for the month and get this
12/01/2014 - 15
12/02/2014 - 32
12/03/2014 - 0
12/04/2014 - 12
I have a table called exiting staff data and a field called Follow up required. I want to count the number of Yes entries and display it on the main menu. Have tried
Code:
=Count([Exiting Staff Data].[Follow up required]="Yes")
And using dcount but keep getting error messages.
In my report, I have combo boxes that display numbers (for example min_revenue and max_revenue).
In case of a "0" or "999.999", I would like to display "n/a" within the combo-boxes.
I would like to avoid doing this within the table, because I would like to keep the data type in number format.
Remark: I confused "combo-box" with "text box". I'm using text boxes, which are supplied with values from a table
I've got a table that has several yes/no data type fields. I'm trying to the data into a report and show either yes or no as opposed to -1 or 0.
View 3 Replies View RelatedI have a report in access that currently works like the image Current Report.png.
I was hoping it is possible to make it look like the image in What I Want.png
More a spreadsheet type report that I can then print out.
My database contains a table that has two fields named 'occurance1' and 'occurance2', both containing a range of different dates. In a form I have in that database, I would like to have a field displaying the total counts for both 'occurance1' and 'occurance2', but only the count for both occurances that have 'Today' as a date. Preferably without having to run yet another query, so if possible I would like that as soon as an occurance that has 'today' as a date is entered in the table, the total count shows correctly in the form.
View 11 Replies View RelatedI have a database that has the table [tblAttachments] to store various attachments. In this table I have a primary key [ItemNumber] and an attachment data type field. This table holds all attachments for a Customer/Record.
What i am trying to accomplish is being able to code a command button to send the Attachment file (eg. various type of files .doc; .exl; .jpg etc) as an attachment in an email.
I have found some info on saving them to the local harddrive but this is not going to work for my specific needs.
The database is to track and evaluate call center associate phone calls. I created yes/no fields for multiple common errors (accurate/complete, Security, and client experience. and under each are @ 20 common errors)
(the problem is that I did not create a seperate table for each main category which I think might have made things easier)
Now what I am trying to do is create a report that allows me to show (or select) an error and have it show all the associates that had that error in a given time frame.
I already have a report to show all associates and all the errors that each had in a certain time frame. (so vertically I have associate detail and horizontal I have error detail).
is there a way, without creating 25 separate reports, to show all associates under an error type?
I am trying to count how many times a name comes up. I dont want to tally how many in field.
For example. I have a field name: School District. Underneath that I have hundreds of schools. I want to know how many times JFK High School or Plainview High School in a report.
Thank you.
I have two tables - one contains customer names, the other customer appointments. So one customer - many appointments.
Each appointment is booked at a set interval (every 3 weeks, 4 weeks, 5 weeks...) which can vary from one appointment to another.
I want to do a count, in a query, to show in a report.
I need to count:
Total Cus_ID by interval - so how many customers are booked every 2 weeks, every 3 weeks, etc.
I need the count to be based on the customer's LAST appointment only.
I have tried, select query (group), crosstab (!)... querying a query... Total line using Max... then Last...
Nothing I tried works. The sum of appointments by interval should equal the total number of clients in the database... It gives me 4 times that... so it is counting every appointment, not just the last appointment entered.
I also will be including two other fields: activecustomer = yes and source = Eve - need to know criteria to set.
I have a report where I would like to count the records. I can do this in a typical way to count the records but I'm a little stuck on this scenerio.
In my report I pick a date range of 04/01/2013 to 04/30/2013 it displays all my records. I have 3 records for 04/01/2013 what I would like is for that to count 1, not 3. So on and so forth - so it will show me at the end of the report how many times a week they worked. Is there a way to do that?
I am trying to create a report that shows how many sales each sales person has in a 2 year period and sort it from the most # of sales to lowest. I want to show all sales people not just top 5 or 10.
View 8 Replies View RelatedFor example, I have 1 table with 3 fields : Name, Birth date, Gender. Then I want to create a report where all data are grouped by age range and gender
View 1 Replies View RelatedI need the total of days in a report but exclude the repeated ones.
So user are working sometimes in different work orders on the same day but our administration only needs to know the number of days worked in one period of time.
i send a jpg with the example i use the =Nz(Count([Date Worked]),0) but that way i get all the entries counted