I can't get my reports' unbound field's to display the criteria parameter I enter when report is opened. I have done this before but not in Access 2010.
In my parameter, I do have a long string inside the brackets (e.g. =[Enter START Date "1/1/14" or Leave Ranges Blank to show ALL]). I am wondering if this or the quotes inside the brackets are causing it not to work.
I want to use a image in Header in a report. Even if I use a small image (gif), it produce a huge mdb file. Haw can I reduce it?
View 3 Replies View RelatedI cant get the report the way i want it anyway but basically i have a subreport header embedded in the Page Header of my report.I can see it in Report view but not in Print preview and it does not print of course!?
View 1 Replies View RelatedI have a database used for several product lines. Depending on the product line selected, I need to add an image to my report as the header for it. I need to store the images (there are only 3) in the database and cannot have an external link to them. Have been trying to figure out the best way to do this and I am finding both OLE Objects and Image Objects.
View 8 Replies View RelatedI have a report, rptAllCSCS which is based on a query qryCSCS2...
One of the fields in qryCSCS2 is Status and each record is either "Current" or "Not Current"...
My report is being viewed via a navigation form, so one of the tabs says CSCS and when clicked the user can see the report...
I have added a button in the report header which when clicked opens the report in print preview so the user can print the report. (Done with a macro in the On Click of the button.)
I would like to add a combo box cmbStatus which has the values "Current" and "All" in the report header. (Current will show only when the Status field = Current and All shows all records so Current and Not Current together). This will act as a filter for the user to see the corresponding records and they can then press the print button or just view on screen.
I haven't worked with filters before except when you specify the criteria in the query and point it to a control on a form which then opens the report... As this report is already open I'm having trouble, as well as specifying the "path" when something is in a navigation form being a bit tricky...
Any way to repeat the Report Header on every page?
I had my header in the Page Header so that it would repeat on every page, but it did not have the CanShrink option so I put it in the Report Header so it shrinks when I want it to, but now it doesn't repeat. I was hoping there was some kind of code I could implement that would let me repeat the Report Header on every page.
Or is there a way that I could get the CanShrink property in the Page Header?
I create several reports for several different companies. Report data is the same but the report header data changes based on the company selected. All works well until I attempted to add their individual logos. I have tried many of the suggested methods both here and elsewhere to set the image path in Image.picture and image.control source. But I get "windows can't open file". Access 2010 on Windows10 insists on using the insert picture window when i select an image control. There is a drop down in the property sheet. I've gotten it to work a couple times but then its gone after restart.
The header data comes from a table [Company] which has the fields - name, addr, phone, path to image, and active(yes/no)
I'm producing PDF reports in a VBA routine in Access through the DoCmd.OutputTo acOutputReport.
The routine works great, however i have now a new requirement and i need to change the report header so to if Country X is selected in a drop-down menu, then only image X is shown on the report header; if country Y is selected then only image Y is shown on report header.
I was simply thinking to make this through the "visible" option of the image, however it doesn't work because i get error "report must be open".
I have a main form (Parent) along with a subform(Children). I want to have a button that generates a report with the Parent information as a header and the items in the subform as details. In addition, I want the report to show only the children that were recently added not all of the children.
View 1 Replies View RelatedI have a report, which opens a dynamic search form (built off of John Big Booty's code from this site). The form opens, and works as expected.During the dynamic search form testing, I created an 'OK' button that opens another form to display the record, but the dynamic search was opened first.
I would like to reprogram the button to display the selected record in the report which opened it.How can I get the selected record to display in the already open report?
I have a report that generates the position of certain items. When I produce this report it doesn't put the data in order. All associated data with that position is correct, it is just not in numerical order. The attached screenshot shows the issue I am having. In the position column it should read 1,2,3,4 but in some cases the positions are not in order.
View 2 Replies View Related I have 3 tables.
One is a list of fishermen with all their info. I used a Code as the primary key.
The 2nd is a fish ticket sheet with fish tickets entered and the code in there as a foreign key in the relationship between the two.
I create a report listing the fish tickets and prices perfectly for the 4 fishermen I have entered fish tickets for. (I have 140 fishermen in the main table)
I added a 3rd table for payments made to the fishermen. There are two payments for 2 of the fishermen.
then, I go into report design view and drag in two of the cells from that 3rd table into my report.
The problem is the report then prints JUST the fish tickets and payments for the two fishermen that have payments...not the info for all 4 fishermen. I need to print out settlements for all the fishermen whether they have payments or not?
I have to add 2 company logos and a phone graphic to a report.
I can only seem to add one logo and if i try to copy and paste a graphic it just displays the file path.
I have a query that I use to populate a report.
The query has a parameter box that opens and asks the user to enter a date.
I would like to display this date in the Report heading.
Is there any way that I can grab the value entered into the parameter query and display it on my report heading?
I was trying to filter a word using Not Like "word" in my query cirteria, some data is blank also, From this record i want to retrieve the result. But when i use Not Like Criteria, filter is working but blanks columns are also filtered.
I want to display all records (including blanks) except what i shown in the criteria.
I have date picker which works correctly in form. When I put that form as subform to reports header calendar shows up but after selecting date on calendar textbox stays blank. Format of textbox is Short Date, Show date picker property is For dates.
View 1 Replies View RelatedI have following table, forms and reports in my access database:
Tables:
1- maintbl
Query:
1- mainquery based on maintbl
Forms:
1- Input or mainform based on mainquery
2- unbound form: to Filter report
Report:
1-mainreport based on mainquery
Objective:
I want to filter report on followings:
Name(Text)
Month(Text)
Year (Number)
I have 3 combo boxes on ubound form and want to filter report based on three above mentioned criterias.
I am in the learning phase for MS Access reports. I have a datasheet which contains the employee daily activities.I need a report when either or both criteria is selected. For ex..criteria1 is Start date and End Date and criteria2 is Employee Name.Output of the report should be based on the selection of the criteria ,as I said either or both.
View 3 Replies View RelatedI run a Query based on some data in a "drop-down" box. It works in just datasheet view, but when I print it on a report, it displays the position that the data is in the drop-down box.
How do I display the data, not the position on the report? Here's an example:
My drop down box contains:
apples
oranges
bananas
My query returns apples, but in the report view it displays the number "1" instead of my data "apples". If the query returned oranges, the report would display "2" instead of "oranges" and so on.
Any ideas?
Jen
I have a form with a command button that runs a report. I have been asked to modify things and if the data in the text box is "A", run report "A". If the data is "B", run report "B" and so on.
View 3 Replies View RelatedI created a database to record time logged per workorder for each employee on my job. Each time log has a specific "Trade" attached to it along with a number of hours the employee spent on that workorder. I've created a report to display how much time the selected employee spent on each workorder (within a date range) and now I want to see what percentage of their time was spent on a particular "Trade" (for instance, during September Employee "name" spent "percentage" of their time on Electric, "percentage" on HVAC, "percentage" on Plumbing...[and so on])
I have trades listed in the table and in the time log, the form writes to the trades area of the table (probably very elementary for this discussion) and the report lists the name and grand totals with percentage of total time on each workorder, but does not list any trade information.
How can I add this into my report, preferably at the end (Report Footer?)
I have a query that has a field that reads DateReceived By Month: Format$([Workorders].[DateReceived],'mmmm yyyy') The criteria line is Like "*" & [Enter Month & Year (Leave Blank for all)] & "*" And this works when I run the query. If I enter october 2013 it shows only records for this date range like it should.
Then I built a bar chart report that will show the workorders only for the month entered. The problem is, If I leave this field in my query the chart does not update . When I open the chart it will prompt for the month and year but the data in the bar chart doesnt change. If I remove this field the chart updates as expected.
If I go into design view for the report and then right click on the chart and go to properties , then to row source, it reads as this:
TRANSFORM Sum([Workorders Query2].MyTime) AS SumOfMyTime SELECT [Workorders Query2].SerialNumber FROM [Workorders Query2] GROUP BY [Workorders Query2].SerialNumber PIVOT [Workorders Query2].[MXDPrinter];
If I click on the elipstical to go into query tools for this line , and click on run I get the error : The microsoft Access database engine does not recognize '[Enter Month & Year (Leave Blank for All)]' as a valid field name or expression.
So my criteria runs normally in the query and returns the correct records, but I can't get it to work in the chart .
I have the onlick of a button programmed with
Dim stDocName As String
Dim stCriteria As String
stDocName = "Rallies this year"
stCriteria = "[Year of Rally] = " & Year(Date)
MsgBox (stCriteria)
DoCmd.OpenReport stDocName, acViewPreview, "", "", stCriteria
the output in the msgbox is [Year of Rally] = 2013 which seems fine but the OpenReport command then gives me a type mismatch error the [Year of Rally] is a calculated field in the query - the record source.
I have tried
stCriteria = "[queryname].[Year of Rally] = " & Year(Date)
and same problem
I have a report with a table as the row source. I have command buttons that opens different forms and allows the user to choose criteria, the form then filters the report based on the chosen criteria in the form, but if I use the destination city form to filter the report by destination city, then filter the report using a different form, the destination city filter is lost, is there a way to filter the report with a form by say destination city, then further filter that dataset with another form for say location city.
View 14 Replies View RelatedIs it possible for a Header in a Report to always appear at the top of the screen - i.e. even when you scroll down the report?
I have a few buttons at the top of my report (viewable on-screen only) and would like them to remain at the top of the screen and the rest of the form to scroll if possible.
Just encountered a new issue in my Access database whereby reports and forms often appear transparent and graphically glitch all over the place. Hard to describe but the following screenshot will demonstrate:
[URL]
If I zoom into a report then it renders properly and will print OK. If I refresh a form then that seems to fix it temporarily.
This has only started happening since we upgraded our server last week.
Background.
Access front end.
MySQL back end.
Users have a copy of the front end on all of their PCs. This issue is affecting everyone.
The database backend isn't stored on the server we recently replaced.