I have a user form in Excel that sends data to a table in Access 97.
(Due to restrictions on system).
I will need to pull reports off this table to send via email to Lotus Notes 8.5
Is there a way I can filter the report depending on the data entered in a column?
aka If a cell in a column has "Cheese" I can run a report showing just the "Cheese" results?
I have now a report that span around 2 pages. It has subreports in the report that depening how many rows there are they can grow or shrink.I have the problem that the second page the top margin is to close to the top of the pager. The paper has a logo on the right top side. I can make the first page look nice under the logo, but the second page prints to close to the edge that prints over the logo. I did add a page break, but when the page 1 has more data, it flushes this to the next page. The page 2 is now page 3. How can I avoid that, or make it so that the margin of the second page/next page is on the correct lenght of the top. I tried it with the page setup, but it does not work.
View 3 Replies View RelatedI have a very simple report that is generated from a table. There are no queries associated with this report. When new information is entered into my table I run the report and the new information appears. It has been working correctly for months. Now all of a sudden after the new information has been entered it doesn't show in the report.
View 4 Replies View RelatedI have a form where we fill in information for supply of PPE to employees.
Each item must be signed for on a printed report.
I am encountering problems trying to create enough rows for my report detail for each signature of the number of items supplied.
For example, on the form I will select the "equipment" - 4 hats supplied and 3 boots. On the report I want the equipment set as the group and the detail to be a number or rows which equals the number of selected items. therefore under the Hats group heading I want 4 blank rows which are made up of 3 text boxes - Print Name, Signature & Date and another group heading for boots but with 3 lines.
The Query gives the results below: (Item name is linked to a PPE table containing Item ID, Item Name, Cost etc..)
IssueIDDateProvidedItem_Name AmountIssued
0001 01/11/2013 Gloves (Orange) 10
0001 01/11/2013 Hard Hats (Black) 2
0002 02/11/2013 Hi Viz (Large) 5
The report I aim to generate from this should look as attached ...
The query/report is set up as a parameter report so I will enter the issueID such as 0001 and only those items will appear on the report to print and sign.
I have a textbox & button that when entered & pushed - run a query for the top values randomly depending on the value entered into the textbox.
My code is...
strSQL = "SELECT TOP " & Me.Text140.Value & " [CAN - NAME].Name, [CAN - CPT/VOUCHER].Voucher_Number, " & _
"[CAN - CPT/VOUCHER].Procedure_Code, [CAN - CPT/VOUCHER].Service_Date_From, [CAN - CPT/VOUCHER].Patient_ID, [CAN - CPT/VOUCHER].service_id, Rnd([service_id]) AS RandomNum " & _
"FROM [CAN - CPT/VOUCHER], [CAN - NAME] WHERE [CAN - CPT/VOUCHER].Service_Date_From Between " & Me.StartDate.Value & " And " & Me.EndDate.Value & " ORDER BY Rnd([service_id]) DESC "
It runs like it should but doesn't populate any records...that is until I go into the design view, deselect one of the fields and then reselect the same one - only then does it populate.
Do I need to open the query first and then update/append instead?
I have a form where we fill in information for supply of equipment to employees.
Each item must be signed for on a printed report.
I am encountering problems trying to create enough rows in my report detail for each signature of the items supplied.
For example, on the form I will select the "equipment" - 4 hats supplied and 3 boots. On the report I want the equipment set as the group and the detail to be a number or rows which equals the number of selected items. therefore under the Hats group heading I want 4 blank rows which are made up of 3 text boxes - Print Name, Signature & Date and another group heading for boots but with 3 lines.
I have a report based on a query.There is a field in my personnel table and the query: [Field] with values from my lookup table and has three choices:
1-Inspections
2-Administrative
3-Safety..
I have a report and would like to filter based on [Field].I can filter by putting [Field]=Inspection on the Filter On Load, then typing 1 into the parameter box. And it works.I cannot however choose more than one of the three choices and I have to type the number in. Fine for me but it won't be for other users.it is used for more than one report. I would also like to avoid having seperate queries for all these reports.In other words, I would like to filter the report, not the query.
I have a report containing all the fields from my "main table". I want to create buttons on a from that will filter information from the report. For instance, I have a field titled "Priority". I want to create a button that will filter the report to only show records with a "Level 1" priority. Is there anyway I can do this using VBA?
View 3 Replies View RelatedI have following table, forms and reports in my access database:
Tables:
1- maintbl
Query:
1- mainquery based on maintbl
Forms:
1- Input or mainform based on mainquery
2- unbound form: to Filter report
Report:
1-mainreport based on mainquery
Objective:
I want to filter report on followings:
Name(Text)
Month(Text)
Year (Number)
I have 3 combo boxes on ubound form and want to filter report based on three above mentioned criterias.
I made a report that show a list of data where there is a date. It sorts the report by year then by month.I collects the information about the date from a field in a table where the whole date is inserted (example28.12.2014. (date/month/year)).What I want is to make a combobox or a listbox where you would chose a year you want it to show you the report for and a button that would open the report.So to make it clear in a form you would have a combobox where years would be displayed (and i would like the combobox to somehow know what years are inserted in the table), you select the year and click on the button that would open the report for that year.
The report name is "rptClients". The table from where the data for report is taken is "tblCustomers" and the field where the date is in the table is called "DateOfUse".Also in the report the date is in a field called "DateOfUse" also.
I am trying to filter a subreport on open.
In my report I have a field called "Packages" and my subreport consists of a table, one of the columns is "Packages" so I want to use the value that I have in "Packages" to filter for only those items in the sub report.
Is this possible?
I am fairly new to access but so far I have been able to get what i need from it, until now. I am trying to find a way of comparing two sets of data to find out an employee's average productivty.
Table 1 -Hours Worked (by day)
- contains 'name' 'date' and '# of hours' worked
- an employee would enter the hours here on a daily basis
Table 2 - Contracts Keyed (by month)
- contains the number of contracts worked that is derived from seperate system
- this is entered on a monthly basis (so for example: John keyed 30 contracts for the month of January)
- the system i am pulling this info from does not have the ability to pull a daily count of contract per employee, only a range of dates and it then provides the sum for that range (unless I ran a query for each day, for each employee which would take me hours)
- employees dont have access to this system to enter their own # of contracts keyed on a daily basis.
- for entry, so far i have just been putting the first of the month and then the # of contracts.
In a nutshell, this is the calculation I am trying to create:
(Sum of "# of hours" for the month) / (total "# of contracts keyed" for the month) = employees average hourly productivity.
I have tried to do this with various types of queries and reports but with no luck, I get a prompt saying that access can't compare the 2 fields.
Is there a way to compare the data that is entered daily with the data i would enter monthly?
I am coming back to an Access 2007 database that I put together some time ago. I need to simply delete a column and its associated heading in a report and I can't remember how to do it!!
I have attached a few screen shots.
001.jpg is of the actual report and 002.jpg is what the report looks like in Design view. If I try to use Layout view it displays the message "Layout View is Unavailable for this report".
I have a report filter that filters the reports by month and year:
Code:
DoCmd.OpenReport "AttWholeCity", acPreview, , " Month = '" & txtCourseDateMonth & "' AND Year = '" & txtCourseDateYear & "'"
I want the code to also show these two columns where there are null/blank values aswell, for example if I filter by apr 2015 i want the report to show these columns as well as blank columns is this possible
I'm using the following code to filter a report by using a multi-select box.
Code:
Private Sub cmdOpenReport_Click()
On Error GoTo Err_cmdOpenReport_Click
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
[code]....
I have a report that contains a subreport. The report is simply an image of a word document. The subreport will contain the actual data.When I open the subreport, the IN query works perfectly. When I open the main report, I only get the first record listed in the IN query. I have the master/child links set properly.
I have a report on this report there is a Destination City field and a Current City field, loaded from a table. I have a command button that loads a form to filter on the destination city, I have another command button that loads a form to filter on the current city location.
What I would like is, when I use the form to filter the destination city, then load the form to filter on current city, I want the listbox on the form for the current city to only list cities that are associated with that destination. Both form listboxes have the rowsource from the same table, just different fields. Is this possible?
I have a report, rptAllCSCS which is based on a query qryCSCS2...
One of the fields in qryCSCS2 is Status and each record is either "Current" or "Not Current"...
My report is being viewed via a navigation form, so one of the tabs says CSCS and when clicked the user can see the report...
I have added a button in the report header which when clicked opens the report in print preview so the user can print the report. (Done with a macro in the On Click of the button.)
I would like to add a combo box cmbStatus which has the values "Current" and "All" in the report header. (Current will show only when the Status field = Current and All shows all records so Current and Not Current together). This will act as a filter for the user to see the corresponding records and they can then press the print button or just view on screen.
I haven't worked with filters before except when you specify the criteria in the query and point it to a control on a form which then opens the report... As this report is already open I'm having trouble, as well as specifying the "path" when something is in a navigation form being a bit tricky...
I have a report with 2 option groups, I cannot get both of them to filter the data simataneously, they will each inititally filter the data, but when the opposite group it clicked, the previous filter data does not remain filtered. I have posted the code for the two option groups, I know I'm doing something wrong.
First option group code:
Private Sub Frame43_Click()
Select Case Me.Frame43.VALUE
Case 1
Me.Filter = "allowable_weight Like '263000'"
Me.FilterOn = True
[Code] .....
My problem I am having is that in my database you can click around to different customers info on forms and from there you can click on a button to get to another form that lists all of the customers vehicles. From there I have a billing report that I created and I am trying to filter the report to get what I want on there.
I have been searching around and have found codes to filter reports so that right now I have it when I click on Billing Report it filters by the customers form i am on. But now where i am having some issues is that I am also looking to filter by a yes/no field so that anything clicked yes for that customer will be filtered to show on this report.
I have a database which have tbl1 with field admission year with data like august/2007, august/2008. i have entered all data with form1. My problem is that i want filter report. user click a button so a form opened and than he entered data in a text box like august/2007 when he click on show report button only those pages which have august/2007 text will display in report. second time when user change text like august/2008 in text box report also show changes.
View 5 Replies View RelatedI am using a form to filter information so that I can open a report. The report displays information pertaining job costs. Each month the company I work for records their labor, costs, and travel in a form with a year to date amount. Right now, I am having a problem opening up a report for one specific job and a specific month. So what I want the dialogue box to do is to pick from a list of jobs then pick from a list of months, click a button that prompts a preview of the report.
View 14 Replies View RelatedThe data the query pulls is employee name, course ID, course name and course completed date. I have added criteria in the query that asks for the Course ID to filter on a given course and a dynamic field in the query AnnualReqDate: DateAdd("d",+365,[TrainingCourseCompleted]). What this returns is a list of employees that have completed course X the date they completed and the date (12 months) when the course is due. This works great, have created a report that reflects this very well.
The issue comes in when I try to add the ability to filter by date range on the AnnualReqDate dynamic field. the AnnualReqDate dynamic field does not exist until the query is run the Between [Start Date] And [End Date] criteria add to the AnnualReqDate dynamic field wont work.The query fires off but returns zero records.
I have a report [Report1] that gets its data from a query [Query1]. On [Report1] there is an unbound text box [EnterEndDate] that I want to use as a filter for the report criteria, and have it filter the report to show every report row with the value in the [EndDate] field greater than what the user entered in [EnterEndDate].
There is no need to save the value used in [EnterEndDate]. It will be entered after the report is run and changed on demand while the report is open for the user to see different date ranges.
My table "EmpTraining" will store 5 fields:ID (PK Autonumber )
EmpID (From Employees Table)
FleetName_ID ( From FleetList Table )
Engine1_ID (From EngineList Table )
Engine2_ID (From EngineList Table )
At the point of adding a record to EmpTraining table , EmpID and FleetName_ID and Engine1_ID are Required, Engine2_ID is optional.
I am having trouble generating a Report Filter that will use 3 Listboxes(multiselect) and be able to limit the report by what is selected.
My Listboxes filter:EmpBase (from Employees Table)
FleetName_ID ( From FleetList Table )
Engine1_ID (From EngineList Table )
I am trying to use the Third listbox to filter both Engine1_ID and Engine2_ID and I think this is my main problem.
On the Filter form that has the ListBoxes I use a button to apply the filter to the report, the code for this Onclick event is:
Code:
Private Sub btnApplyFilter_Click()
Dim varItem As Variant
Dim strBaseStation As String
Dim strFleetType As String
Dim strEngineType As String
[code]....
How can I also make it filter the Engine1_ID and Engine2_ID fields .?
Or Should I store the FleetName/Engine1/Engine2 in a different way?
I have a report based on a query, the report loads filter based on dates input to the query from Form1 when report loads. I want to filter this report further from a listbox on form2, but I want the listbox rowsource to populate based on a field in the loaded report. Is this possible?
View 2 Replies View RelatedI am migrating a database from Spreadsheets to Access 2010. Everything else is going well but I am stuck at one point. A table has Name, Gender, and Nationality fields. Now, I need a report that will have only Nationality and Gender fields. The nationalities will be in a list and another column should have total count for each nationality. Then, the Grand total should be print at the bottom of the report. Moreover, two other columns should have a count of each gender (male and female) against every nationality.I need Report which will have Four columns i.e. Nationalities, Total, Male, Female... The nationalities column will contain a list of nationalities that are there in the data table [field name: National].. The total column will count and show the sum of each nationality from the data table [same field: national]... The Male and Female columns will do the same i.e. count the occurrence and show the total for Male and Female from the data table.
View 6 Replies View Related