I have a report [Report1] that gets its data from a query [Query1]. On [Report1] there is an unbound text box [EnterEndDate] that I want to use as a filter for the report criteria, and have it filter the report to show every report row with the value in the [EndDate] field greater than what the user entered in [EnterEndDate].
There is no need to save the value used in [EnterEndDate]. It will be entered after the report is run and changed on demand while the report is open for the user to see different date ranges.
I have 10 unbound textboxes with the Tag Name "LoopID" in my report. I have to display the "PatientNumbers" field from the table tblPatient in those text boxes. Below is my code.
When I run the report, I get the error message: Run-time error '2448.' You can't assign value to this object and the code "Ctl.Value = rst!LCANumber" is highlighted.
Private Sub Report_Current() Dim strSql As String Dim dbs As Database Dim rst As Recordset Dim x As Integer Dim Ctl As Control strSql = "Select PatientNumber from tblPatient"
This basically gives a count of for a specific month. There are twelve rows of text boxes and two columns. There is a query applied to the report to input the year, as this is a yearly report.
What I want to do is link a chart to each and every text box to show the data in an easy to view format. But I can't seem to figure it out, and I've had no luck on the web .
I have a database which have tbl1 with field admission year with data like august/2007, august/2008. i have entered all data with form1. My problem is that i want filter report. user click a button so a form opened and than he entered data in a text box like august/2007 when he click on show report button only those pages which have august/2007 text will display in report. second time when user change text like august/2008 in text box report also show changes.
The layout: I have form1 listed in continuous view. I have about 10 fields being listed. I have unbound text boxes for each field in the form header designated as a filter for each field.
Ideal world: Have each filter update records as you type. But I would also like for a "cascade" effect on the filters as well. Being that I can type in a few letters in FilterField1, and type in a few letters in FilterField2 and it would only display the records where the criteria is met for both filters.
What I'm not looking for: Only applying 1 filter at a time for 1 field. I have this setup now, but would like it to be more versatile allowing several fields to be filtered at once.
I have this on two slightly different reports, where only one line of the report is different. One report works fine, no problems. All the data is there. But on the second report I get the dreaded #Name? error.
I have two numeric fields which make up what looks like a full decimalised number ie 20.22 - only I am unable to put the decimal point in between the two numbers.
I thought about putting in an unbound object such as a picture of a full-stop but cant get it anchored at the correct angle to make it look convincing in the report.As this is such a huge database I have tried to amend the tables, but it loses vital data ?
I have an unbound combo box on a report that looks up to a table of address data.I have a specific requirement where if one of the bound fields on the report is a specific value, I want the combo box to show data. If the bound control on the report is a different value, I want the data in the combo box to be different.
I have tried using the OnOpen method, but it says I cannot assign a value to it.I have tried using the OnLoad procedure, but it doesn't show anything. the code is as follows:
Code: Private Sub Report_Load(Cancel As Integer) If Me.[Dispatch Type] = "Sent to A" Then Me.cboDispatchTo = 15 ElseIf Me.[Dispatch Type] = "Sent to B" Then Me.cboDispatchTo = 8 End If End Sub
I have an unbound text box in the detail section of a report that can be anywhere from a couple of lines to more than 90, depending on what items have been selected elsewhere. I've gotten the size of the textbox and detail section to vary using .height and allowing for 270 per line. All this works fine and everything prints. However...
The problem is that with the reports where this textbox won't fit on the first page, the detail section doesn't begin printing anything until the second page. It will then break across pages 2 and 3 just fine, but I would like it to start printing on page 1 whether it will fit or not. Research shows it has something to do with the "on retreat" event, but I can't find enough to figure out what to do.
For a text box in a Report, I am trying to use the "SumOf([UnboundTextBox])" as the Control Source in the Report Footer to add the unbound text box in the Details section. I know it works with a bound text box, but does it not work with an unbound text box?
I have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
When I open the report on XP/Access 2007, it works just fine.
When I open the exact same accdb with a Win7/A2007 machine, the report does not open. If I debug and display the error, a msgbox appears "The OpenReport action was canceled."
I have other bound reports and those open with XP/A2007 or Win7/A2007 just fine.
It makes me VERY nervous that the same exact ACCDB in A2007 runs differently on different OSs (XP vs Win7).
SELECT qryHoursReq.VolunteerId, qryHoursReq.Name, qryHoursReq.Program, Sum(qryHoursReq.Total_Time) AS SumOfTotal_Time, qryHoursReq.S_date FROM qryHoursReq GROUP BY qryHoursReq.VolunteerId, qryHoursReq.Name, qryHoursReq.Program, qryHoursReq.S_date HAVING (((qryHoursReq.S_date) Between [startdate] And [enddate]));
This is my query
I'm trying to get a count of distinct volunteerID in an unbound textbox on report.
If I use =Count(*) I get 2 when I put in date parameters and it groups by program
This is kind of correct, but, these 2 are the same person, she had different days she participated.
What code can I use for only get a count of 1
FOrgot to mention, when I use the DCount with numerous examples, I get #Error
Working on a report that displays multiple pie charts. Each chart is based on a different query. I cannot pull a single query for all charts due to the criteria for each conflicting with each other. Each query is filtered by Fiscal Year based on what I input into my Fiscal Year Filter form. The command button on the FY Filter Form opens the report, set TempVar to the FY field (the criteria for each query), and closed the FY Filter Form. This works as I want it to.
The problem: I have additional fields I want to show up on the form such as number of completed students (WINGED). This number is based on yet another query where all completed students are counted [WingedCount]. I have tried to write an expression to an unbound field that points at this [WingedCount] field but it does not work. Then, I changed the report's source as the query with the [WingedCount] field. This does work, however this is where I run into an issue
I open my FY Filter Form and type in my criteria and select the open command button. However, now I am asked for the criteria again for each chart on the report.
I need a way to input the criteria only once and have all charts populate as well as my count field.
I have attached a jpeg of my current report and will upload jpegs of the needed output following this post.
I have entered an unbound text control into my footer, and typed in some text, and now when I go to Preview my report it's asking for a Parameter Value? There is no parameter, as it's just a return address typed in there. That's crazy!!!
I have a report based on a query.There is a field in my personnel table and the query: [Field] with values from my lookup table and has three choices:
1-Inspections 2-Administrative 3-Safety..
I have a report and would like to filter based on [Field].I can filter by putting [Field]=Inspection on the Filter On Load, then typing 1 into the parameter box. And it works.I cannot however choose more than one of the three choices and I have to type the number in. Fine for me but it won't be for other users.it is used for more than one report. I would also like to avoid having seperate queries for all these reports.In other words, I would like to filter the report, not the query.
I have a report containing all the fields from my "main table". I want to create buttons on a from that will filter information from the report. For instance, I have a field titled "Priority". I want to create a button that will filter the report to only show records with a "Level 1" priority. Is there anyway I can do this using VBA?
I have following table, forms and reports in my access database:
Tables: 1- maintbl Query: 1- mainquery based on maintbl Forms: 1- Input or mainform based on mainquery 2- unbound form: to Filter report Report: 1-mainreport based on mainquery
Objective:
I want to filter report on followings: Name(Text) Month(Text) Year (Number)
I have 3 combo boxes on ubound form and want to filter report based on three above mentioned criterias.
I made a report that show a list of data where there is a date. It sorts the report by year then by month.I collects the information about the date from a field in a table where the whole date is inserted (example28.12.2014. (date/month/year)).What I want is to make a combobox or a listbox where you would chose a year you want it to show you the report for and a button that would open the report.So to make it clear in a form you would have a combobox where years would be displayed (and i would like the combobox to somehow know what years are inserted in the table), you select the year and click on the button that would open the report for that year.
The report name is "rptClients". The table from where the data for report is taken is "tblCustomers" and the field where the date is in the table is called "DateOfUse".Also in the report the date is in a field called "DateOfUse" also.
In my report I have a field called "Packages" and my subreport consists of a table, one of the columns is "Packages" so I want to use the value that I have in "Packages" to filter for only those items in the sub report.
I am running in to a brick wall with this. I have an unbound text box with the control source set to =IIF([text42]=0,0,[text42]/[text44])*100 and in continues to return a #name? error.
I am not sure how to get this expression to work. I have even tried to put =[text42]/[text44] and I still get the #name? error.
I'm trying to hash two scripts I've found into 1 functioning filter, however I'm still relatively new to vba and can't figure out how to get this working.
I'm trying to use Allen Browne's Search Criteria:
with another snippete of code I found here:
Code: 'Purpose: This module illustrates how to create a search form, _ where the user can enter as many or few criteria as they wish, _ and results are shown one per line.
[Code]....
It's the date part I'm having trouble with, the rest of the search criteria work fine without the date, but I can't get it working when I try to modify and merge the date sections of each code.
Also I'm using a listbox for the "Yesterday";"Last 4 days";"Last 9 days" and not a combo box.
I have a report filter that filters the reports by month and year:
Code:
DoCmd.OpenReport "AttWholeCity", acPreview, , " Month = '" & txtCourseDateMonth & "' AND Year = '" & txtCourseDateYear & "'"
I want the code to also show these two columns where there are null/blank values aswell, for example if I filter by apr 2015 i want the report to show these columns as well as blank columns is this possible
I'm using the following code to filter a report by using a multi-select box.
Code: Private Sub cmdOpenReport_Click() On Error GoTo Err_cmdOpenReport_Click
Dim strWhere As String Dim ctl As Control Dim varItem As Variant
[code]....
I have a report that contains a subreport. The report is simply an image of a word document. The subreport will contain the actual data.When I open the subreport, the IN query works perfectly. When I open the main report, I only get the first record listed in the IN query. I have the master/child links set properly.
I have a report on this report there is a Destination City field and a Current City field, loaded from a table. I have a command button that loads a form to filter on the destination city, I have another command button that loads a form to filter on the current city location.
What I would like is, when I use the form to filter the destination city, then load the form to filter on current city, I want the listbox on the form for the current city to only list cities that are associated with that destination. Both form listboxes have the rowsource from the same table, just different fields. Is this possible?
