Reports :: Forcing Page Break At The Bottom Of Group
Oct 2, 2014
I have a report which is grouped by employee number - each group can have one or many records displayed - it works fine, but can look untidy sometimes when there are more records than will fit without wrapping onto another page; this is particularly prevalent when there are two or three groups - the third one may run over onto the next page, without group headers.
Is there anyway to force a page break at the bottom of a group if that group is not going to fit on the current page in its entirety?
View Replies
ADVERTISEMENT
Feb 18, 2015
I have been working on this for over a week in Access 2010 and I know that I am almost there, but need getting over this last hurdle as I have a severe case of tunnel vision on this while I am trying to get it to work.
I have a Main Report based on my Element table and a subreport based on my OTC table. There is a one-to-many relationship between the Element and the OTC table.My Master / Child Fields between the two reports are as follows: ElementID;GroupNum
My SQL for the Main report is:
Code:
SELECT Val(DCount("*","Element","ElementID=" & [ElementID] & " AND Step <" & [Step]))2 AS GroupNum, Element.ElementID, Element.ProcessID, Element.ModelID, Element.Step, Element.ElementDescription, Element.RevDate, Element.GPCFS, Element.TrainingGate
FROM Element
[code]...
As an example in testing this report, I am looking at a specific Element with 33 records and a total of 72 OTC records. Each of the 33 records can have 1 or 2 or 3 or up to 4 OTC records but the report is only 17 pages which tells me that the page break is occuring based on the ElementID and not on the OTC records....
View 1 Replies
View Related
Nov 7, 2013
I am using MS Access 2003.I have a report whose Detail band contains a zero-height Comment field positioned at the bottom of the other single row of fields. It has Can Grow = Yes, so it sits waiting to grow if there's any data in this Comment field.
However, when this report prints, if the Comment field just "happens" to straddle two pages, it gets positioned only on the first page and gets cut off in the process. (See attachment 2.) Ideally, the entire field should display on the second page instead.
If I adjust the margins in Page Setup, I can fix this on this particular report. However, depending on the data being reported, these new margin settings can create a problem for the same report with different data. (All depends on where the Comment falls.)I'd like the report to work consistently, no matter the data or margins.
View 1 Replies
View Related
Jan 27, 2015
I am trying to page break my report to have it where the first name and surname of the employee has a separate page with the details of each appointment.
I have tried to do it via format on properties but it does not work..
I have attached an image of how the report appears.
View 4 Replies
View Related
Mar 27, 2015
Is it possible to force a page break after 15 line items ....
View 3 Replies
View Related
Jul 28, 2014
I created a report that would generate, among others, a listbox on monthly payments. How do I make it spill-over to the next page when its contents have already exceeded that of a single paper?
View 1 Replies
View Related
Sep 30, 2013
I am writing a book, using MS Access 2007 (seemed like a good idea at the time I started, and the report that creates the formatted book content works quite well).
The book content is "per paragraph" which gives me total flexibility to move content to whatever spot in the book I might wish, simply by changing the paragraph number (free field, not auto-number primary).
To save paper (or pages) in printing (or viewing) the book, I have the report printing off para by para (as many whole paras as will fit to a page). This is fine but I want each new chapter to start at a forced new page, for "presentation"/appearance sake.
The relevant fields for the purposes of this post are:
paranumber
paratext
chapternumber
forcepageifticked (a Yes/No box), which goes with each paragraph and which I thought might come in handy, I had in mind to link it to a page break control at the top of the "detail" part of the report in design view, and which would be "invisible" except if the report formatting process had got to the start of any chapter, and the Yes/no box was ticked.
View 3 Replies
View Related
Jul 3, 2015
I have a report which shows the results of two separate queries in a simple table view.
One set of data varies in size depending on the amount of records and the other is a fixed size and never changes.
I'm wanting to make my report always show the fixed size data in the bottom right corner of the page when its printed.
I've tried putting it in the footer section of the report but don't want it to affect the size of the details section and just show next to the other query results.
Is this possible and if so how would I achieve this?
View 6 Replies
View Related
Oct 23, 2014
I am trying to create an invoice report. I want to add all the costs from the detail section in my footer. I have accomplished this in either the Report footer and/or the page footer, but the problem is that the report footer doesn't go to the bottom of the page, and the page footer doesn't go to just the last page. I have tested a bunch of suggestions that don't seem to work.
1. Print page footer with Report header = NO - only works if your report is two pages or more.
2. Private Sub PageFooterSection_Format(Cancel As Integer, FormatCount As Integer)
If Page = Pages Then
Me.[TextBoxName].Visible = True
Else
Me.[TextBoxName].Visible = False
End If
End Sub
The Page functions worked, but it did not change the results from page to page. If it was a two page report, then the if statement is false and the text box was not visible on page 1, but it also was not visible on page 2.
View 1 Replies
View Related
Nov 22, 2004
I have a report that lists states and cities within the states. When a state name happens to be at the end of the page the individual cities appear on the next page with no State heading. I solved the second page problem by setting the "repeatSection = Yes" in the Section Header (though I haven't shown that in the example below).
But the previous page (which just shows the State Name and no cities looks dumb. Is there some sort of solution.??
(Actually I would also like any State that continues to a next page to not just have the state name but something like
" Colorado (Continued)" Is there anything I can do in VB to make a page break if the section is going to print but therer isn't enough room for one detail line?
This is what I currently see
Alaska
Ancorage
Prudo Bay
California
Whittier
Anaheim
Colorado
------------------------Page Break ---------------------------------
Denver
Pueblo
Colorado Springs
Deleware
Dover
-------------------------------------------------------------------------------------------
Thanks !
View 1 Replies
View Related
Feb 11, 2015
I've created a report based on a query that shows me the jobs that have been added to tblJobs between two selected dates.
The report works fine and displays all the information I need, however other than being sorted by day of the week i.e. Monday, Tuesday, Wednesday etc. The records just run on one after another.
I want to create a page break, so that a full week is shown on a single page before then forcing a new page when it moves in to the next week.
View 8 Replies
View Related
Feb 23, 2014
If it possible to change if a group is visible based on what page a different group is printed on.
The report I'm working on is a Invoice and it has subtotals in one group and totals in another group.
If the totals are going to print on page 1 then there is no need to print the subtotals. Is there a way to know what page the totals will print on so I can set visible for subtotal group to true or false?
View 6 Replies
View Related
Apr 25, 2005
Hey, I tried searching for this one, but I'm not really sure what to search for.
I am running a report that is double sided. However, I do not want the start of the next group, on the same physical page. I also do not want a starting blank page (as I thought about inserting a blank page after the section).
Any way to do this?
Maybe I have to write a function or something? Depending on if the page is an even or odd number? I honestly have no idea.
Thanks for the help!
View 3 Replies
View Related
Sep 18, 2014
Is there a way to have a datasheet open with the last record at the bottom of the page? I now have it opening to the last record, but it has the last record at the top and can't see the records before it without scrolling.
View 2 Replies
View Related
Jul 7, 2006
I have a report with grouping on a code - I would like to do a page break on the second code - I don't know where to start on this.
View 1 Replies
View Related
Jan 13, 2014
Is it possible to do conditional formating after a page break?
I have been given someone elses mess to clean up. It is a massive procedure which runs dozens of queries, then formats the results and pastes them into a word file at given bookmarks
For most tables there is one record for each lake. However there are several where many entries per lake. The logic being applied is that the font colour for the column is made white, then for each first instance of a lake name the font colour for that cell is made black again.
The problem is there are many times were the first row of data on a new page is not the first record for a particular lake making the reader have to flip back to the previous page to double check which lake they are looking at data for.
So what I want to do is leave the existing logic, and just add turning additional cell's (Column 1, after a page break) font colour back to black.
View 3 Replies
View Related
Sep 24, 2004
I have seen large projects in which there are clearly several printed database reports printed out to make one booklet.
1. How does one get page numbers for multiple reports to go in sequence instead of starting over again at 1 for each report.
2. How can you add a page reference in one report to something in another report?
Do you have to do these things by hand or is there a way to create a something with auto numbering capabilities? Do you do it by importing the reports to MS Word and creating a master document?
View 2 Replies
View Related
Nov 11, 2004
Hi folks, I'm having a problem creating a report.
I've gotten rid of all the linked tables from my frontend, so I'm fetching all my data from the backend with VBA code.
This works splendidly until I got to creating reports!
I can populate the report detail with the below code, by opening a recordset and filling in the appropriate text boxes when the report calls the Format_Detail subroutine, but the problem is, that opening a report with no recordsource sets the FormatCount property to 0, so it only runs through the format_detail once. Setting the .nextrecord to FALSE allows as many sub calls as I need, but I can't figure out how to force the report to generate a new detail line! It's looping through all the records in the recordset, but it's only generating one line on the report
Any ideas?
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer)
On Error Resume Next
If tags.EOF = True Then
[txtfound] = tags.RecordCount
tags.Close
Set tags = Nothing
Me.nextrecord = True
Exit Sub
Else
[txtCode] = tags!TagCode
[txtDescription] = tags!Description
[txtCount] = tags!Countoftagcode
tags.MoveNext
Me.nextrecord = tags.EOF
'something to force new line here?
'
'
'
'
End If
End Sub
Private Sub Report_Open(Cancel As Integer)
Set tags = backend.OpenRecordset("SELECT Tags.TagCode, Codes.Description, Count(Tags.TagCode) AS CountOfTagCode FROM Codes INNER JOIN Tags ON Codes.Code = Tags.TagCode GROUP BY Tags.TagCode, Codes.Description")
tags.MoveFirst
End Sub
View 8 Replies
View Related
Mar 19, 2015
Ok, I have pesky solid line at the bottom of one field (bottom of the field with 6.80 in it..
I cannot figure out where it has come from or how to get rid of it!
Here's the properties for that particular field...
When I delete the column it appears somewhere else...
View 3 Replies
View Related
Mar 15, 2014
I have reports that total the figures in a column and displays the total at the bottom of the column. I would like to display the total at the top of the column since the length of the column continues to grow and I would like to see that total before scrolling down to view the various individual entries.
No matter how I try the =count(x) always shows an error. Is it not possible to display the total figure at the top of a column instead of at the bottom?
View 1 Replies
View Related
Dec 21, 2013
Is there a way of formulating statistics at the bottom of a report?
Heres what i have.
The report pulls Rank, Last Name, First Name, Assigned weapon, Weapon qualification date. After 6 months i use conditional formatting to highlight the soldiers qualification date red. Im in the military that's why im tracking all this, but I need figures to report to higher, and at the bottom i would like it to show, "#Qualified", "#UnQualified","% Qualified", "% Unqualified", "#Expired","%Expired"
View 1 Replies
View Related
Jul 16, 2013
I have a sub-report and the last row is highlight, however, there seems to be extra spacing after the last row. I removed all report/page header/footer so all what's left is the Detail section but I still have this white space after the last row.
View 5 Replies
View Related
Oct 25, 2013
I created a report that only has gridlines around the outside border of the entire report (rather than around each record). I want the grid line style on the last/bottom record to be solid so it boxes in all the records. When I change the "Gridline Style Bottom" for the records, each record has a bottom gridline rather than an outside box around all the records.
View 1 Replies
View Related
Nov 12, 2013
I have a report which includes several subreports. There will be times when a subreport prints partially on one page and completes on the next. I don't always want to break to a new page with this subreport. However, I would want to break to a new page if the subreport cannot fully print on the current page.
View 3 Replies
View Related
Jun 13, 2015
If I have a report and it has controls (labels representing column titles) in the page header. Now when I print the report - if it happens that the last page has no detail records - but there is text boxes and so forth in the report footer. Is there a way to not display the page header on the last page?
I have a report where the last page shows the page header - and the field/column labels on the page header - but for which there is no detail records left to display - on the last page. There is report footer information that should display. It just looks weird because the field/column labels show at the top of the page - but there is no data remaining to print under them on that last page.
View 1 Replies
View Related
Apr 20, 2014
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies
View Related
